BEST WEED EATER HEAD 

Check the description and below for links to where you can buy this weedeater head. Buy the Aero-Flex trimmer head here: amzn.to/2I6Q3g4 Replacement line here: amzn.to/2HzAdgA More replacement line: amzn.to/2Hx7p8N Love this weedeater head. It has lasted a long time and worked great for me.

I have a Craftsman weed eater and have been trying to find these FOREVER. THANK YOU!!!!!! I just ordered some. Over 2 years... thank you

This head came on my Troy Bilt. In my opinion it's no different than all the other gimmicky pre-load heads on the market. I could trim one, maybe two properties before the blades wore down completely. Replacement packs cost $12 and include two sets of blades. That's $6 per change. In contrast, I can get 80 feet of Stihl line for $15. There's no comparison.

I have this exact trimmer head and Areo flex blades that came with my Troy Bilt XP trimmer. The weed eater itself and the blades are just terrible. If you touch anything with those blades but grass it chews them up just as fast as regular line. With this issue I burn thru a pack of these blades very fast and they're not cheap. I'm done buying these and bolting on 4 chainsaw chains, each about 8 inches in length to the cutting head. If that don't work I'll bolt on a circular saw blade. Bring on the dangerousness!

Nice . I will gave to try this out .

Thanks for 10 minutes of your first left hand thread experience. I was in the wrong place, I was looking for a demo of weedwacker head.

I tried this head and I like the way it cuts and it works really well except up against concrete or steel. If you keep it away from hard ruff surfaces and only cut grass it will last a long time. But for heavy brush and stuff its not worth the money.

I purchased a similar head after watching this. Good value for money. Thanks

My Engineer Niece taught me that same saying about 17 years ago when I was trying to open something the wrong way and it has helped me out so many times to remember how to remove things like my locked gas cap on my car which I could never get off and always had to ask for help at the gas station. All that time I was turning it the wrong way!! (Rightie tightie leftie loosie) Maybe next she can help me with spelling as the older I get the less I can spell correctly, and yet when I worked for the school system teachers in the classroom actually asked me how to spell words!! Who knew age would affect your spelling, so beware young people as we all get old and forgetful!!

I put one of the Aero-Flex attachments on my Troy Bilt machine. It does a nice job of weed-eating, but my blades are wearing out very fast. Replacement blades are about 69 cents each at Lowe’s. I was able to get a pack of 96 blades directly from Aero-Flex for about 50 cents each (delivered). This is still $2 every time they wear out. I ate up 5 sets of blades weed-eating my driveway, sidewalk, and rock walls around my flower beds. I will continue to use it this summer. My technique can probably get better, and make the blades last longer.

I tried these a while back and thought it was ok, but due to how quickly they wore down and the high cost of replacement, I went back to stock. I have actually purchased a weedshark and I am going to try that, looks promising and at a fraction of the cost of those 10 dollar a month blades/nylons. Good review though

Have the light coming from behind you when using your camera. Thanks for sharing ! P.S. The best string trimmer line on earth is Rotary Vortex. Cuts like a knife and is TOUGH ! You can get it from various outlets including Ebay and Walmart.

I have found that zip ties work awesome and are easy to change

I had the same ones one my Troy built and everytime I hit my house. The fence. Or anything other than grass they wore down and for 2 stets Are 8 bucks when I can can get more like for that. But I'm glad t works for you and that you like it keep up the good work!!

I think I got a little sea-sick watching this one. Holy smokes! That's better than the roller coaster at Six Flags!

Like to know if this can be placed on an electric snapper ST60V. Tired of the strings breaking all the time

Glad to see your a GM man also!!

Subscribed! Loved it and the presentation. Thanks!

Here in Denmark, left tight is called "french thread" . . . Mechanics love it.

I bought black decker grass trimmer from home depot i buy 50 dollar I didn't wanna spend much for it because It's just gonna be for light use i use it 2 times and each lass then 10 minutes and the wire is over now, it's horrible because the time I spend fixing the wire more then the time i be using it, so I wanna get like a new head for it and like I mentioned it's gonna be for light use what is your recommendation

Looks like an interesting trimmer head. I thought about one of those for my trimmers but the brute power of my Stihl FS-250R, KM-94R and my Husqvarna 525L would probably destroy them. Cool design though.I actually bought the new Stihl autocut 26-2 head for all three trimmers. The Husqvarna required a new nut to put the head on due to different pitch threads but very well worth it. It works very good and is easy and fast to reload without taking the head apart. The Stihl FS-250R is the most powerful and blade capable for brush clearing. Nothing stops it. The KM-94R is a powerful pro series trimmer that you can run attachments on. The Husqvarna 525L is a pro series trimmer that is light, powerful and will chew through pretty much anything green and growing except for wood stemmed growth. If that Weedeater brand trimmer ever gives up the fight you can't go wrong with any of the three trimmers above. This is coming from someone that runs them hard and for long hours on tough jobs. They take it and keep on ripping when ever I need them. They are a bit more expensive but you will not need another for quite a long time. Oh and all three are very quick and easy to start. 👍👍

I use the Stihl quick change head on all my trimmers. You cut 2 pieces of string and feed them into the head. When they break you just feed in another piece of precut line. simple and easy I have 4 trimmers and I use it on all of them.

Woo you hit 100k subs congratulations

Do you know if the Speedfeed fits homelight Item# UT33650A its a 26cc straight shaft trimmer

You're quite a comedian thanks .

Good for what you're doing there (a nice lawn), but if you're whacking in less favorable conditions (rocks, Scotch broom or other tough-stemmed shrubs, metal fence posts, etc.) I think a bump feed is better. Such obstacles make it easy to shear off sections of lines, and the time and cost to replace pre-cut lines every few minutes makes them a PITA. Any line can shear off, but it's faster and simpler and cheaper to get back in operation when there's a spool of line on the whacker and a bump feed.

Oy, sweet ride, buddy. Sweet ride!

Nice one👍🏽 did the head do much of the work? Im thinkn of getting some gear but dont wanna spend alot in the weedeater.

I have one on my weed eater. I love it. I hate the idea of using string.

Remember reverse thread as the head spins will keep it tight. Also how much was the head?

When did you purchase your Aeroflex head? as i recently purchased a Trimmer plus AF730 attachment for my attachment capable Kobalt 80v trimmer and it cuts better at low speeds conserving my battery life. whats neat is now the glider head on it so i can rest the trimmer on the ground when i do mowing with it . as i have the other attachments the cultivator, hedge trimmer, pole saw, blower when i had a Troy Bilt TB425 CS 4 cycle trimmer. but when that broke i went to battery which is just in time as California and other states are banning the sale of gasoline engine powered equipment under 25 hp by 2024. but it was good i found a good suitable electric powerhead to run my existing attachments but it came with a straight shaft lower section and OH YES i love the Aeroflex with the glider like before with a cutting line when mowing i end up scalping the lawn but the glider solves the problem and gives you 2 1/2 in cut when held level with the glider on the ground.

righty tighty,lefty loosey

Could you tell me the outside diameter of the trimmer shaft please ? -

I gotta upgrade !!

I'm thinking you can just mix up a batch of Bondo body filler for that hole in the siding... Job done! Hahahaha!

You need an electric jump start. I've seen some people use zip ties on that type of head but all it does is slap the grass.

fidget spiner?

Good job. Take a break and have a 🍺

Have you ever tried zip ties instead of speaker wire?

What oil ratio do you use with it? I had one for a couple months and only ran a few gallons before the compression went down the tube. I had hp ultra at a 40-1 mix but didn't get mine at home depot but the dump.

Next video. How to start your edge trimmer before you pass out 😂

Nice vid

you is a badass sir

Hahahaha Left handed threads. Been there brother. :)

The position of the camera and against the light doesn't let see that much

Awesome video hahahaha

8 minutes before seeing what I wanted to see.

Will it work with a craftsman weed eater

Ive kwik feed, speed feed, shindaiwa fixed heads...all great for homeowners. The stihl autocut is just a horrible design, you have to cut 2 pieces of line instead of one...that is dumb plus trying to hold the line in place and insert and twist the spindle is just ridiculous. Best trimmer heads out there are husky t35x t45x and t55x tap n go heads. The center button is seated with a ball bearing allowing it to not spin with the rest of the head when bumping it...this really saves on grinding out the bottom. The T35 doesnt have the bearing bump but it does function the same otherwise and you can get them for $20. Bump heads are the only way to effectively trim for multiple hours at a time. Best trimmer lines for small lines are Rotary Brand Vortex, cuts more level and its quite durable. For big lines .130 and above go with their cyclone line hexagon shaped and it cuts well and is the longest lasting line I’ve used.

What brand is it ( the mower) ?

All you got to do is remember it comes OFF the same way it turns!

Anybody have a Pivotrim after market head? I loved mine and uses .095inch (2.4 mm line). But when my 4-cycle trimmer crapped out, I bought a Black and Decker 20v battery system, which wouldn't accept a Pivotrim head. Wish I could find an good battery powered trimmer that would accept the Pivotrim. Anybody out there know of such an animal.

Screwing on something with left-handed threads is easier done while standing on your head.

Do you have any lawn care equipment you don't use anymore and want to sent to the netherlands?

Pink wheels?

i love eating weed

👍👍👍👍👍

i have a weed whipper that had 2 silver knobs that came loose the hold the threads in the head.. they came out and i have lost them/ who designed this crap

320 dislikes? Well, some people don't eat weed, they smoke it . . .

best trimmer head is the echo speed head and standard trimmer line husqvarna titanium or stihl cyclone trimmer or organ line i had the aero head for one of my trimmers i went back to tried and true trimmer lines these gimmick products stink in my own opinion black diamond is good line to and the husqvarna tap and go head is my second favorite behind the echo speed heads good video tho but i don't like this product who tee who i subbed to you tho bro

That's why I can't use a gas weed trimmer. I mean I already don't want to be doing the yard; if the line trimmer doesn't want to work either who am I to argue?

What where’s the guns man ?.....never New you did these kind of video as well Hahahah

buy a stihl or a echo you won't have any more problems

Rename video. Putting weed eater together.....

and we can see 🙈

Hack job, I feel sorry for that grass. GLM

Speaker wire created more work

Looks like edging to me

I think I'll stick with my speed feed head

i just got scare of guns i dont know why i scare of guns i kind of no gun guy ithink i not learn it

The package says not to use vertical lol

Y

Takes 15+ pulls to start? Yup, must be weed eater brand

Next time have the light at your back. We might be able to see what you're doing.

weed eater brand sucks.. get a real weed wackier that can use 1.09 cord. I use a Husqvarna

Use guitar strings...

TECHINCALLY, you are edging rather than "weed eating"

Goats don't eat grass

Is this guy a dope or what

this thing chewed up the plastic trim sticks in one go-round of my (small) back yard! This is like those very cheap printers that need expensive ink. Not good

That facial hair is saying "my family tree is a stump". I'm just messing with you, Bro. I live north of the Mason-Dixon. I guess I'm just out of the loop on what style is in the south.

I have tried this weed eater..it is a POS.. first you have to buy special plastic strips expensive$$$ and second they dont last diddle squat.. DO NOT BUY THIS YOU WILL BE SORRY..

Nothing can be easy. Everything comes w/ 10 pages of directions that don't make sense.

not the sharpest tool in the

lq4 h.p.

The "best trimmer heads" are bump feed heads The best operators are people who know how to use them No. way, no how on this planet is stopping to change the line faster than tapping out more. Premium head + premium line + intelligence = never welding and max production

You are a outkast fan I presume. Weedeater brand trimmers are really poorly made junk and that head is not much better. The stihl 25-2 autocut heads are better but nothing is 100% always guaranteed without any exception except probably death and that you can't take anything with you if there is anywhere we go excluding the ground.

that thing is a POS !!!

With all your magical Crafts manlike skills, do your self a HUGE favor,,,, Dont work on that motorcycle in the back ground.....

Its crap

Very bad video. ....can't see clearly

Terrible camera work, terrible lighting, terrible video. Waste of time.

This head came on my Troy Bilt. In my opinion it's no different than all the other gimmicky pre-load heads on the market. I could trim one, maybe two properties before the blades wore down completely. Replacement packs cost $12 and include two sets of blades. That's $6 per change. In contrast, I can get 80 feet of Stihl line for $15. There's no comparison.