Тёмный

Beta 2-Stroke Motorcycle Top End Rebuild & Cylinder Replace - 250cc RR/ 300cc RR - 3 Seas Recreation 

3 Seas Recreation
Подписаться 15 тыс.
Просмотров 22 тыс.
50% 1

We rebuild the top end in one of our race team 2022 Beta 250 2-Stroke Motorcycles! This is NOT a video to replace your owners manual or a shop manual but it gives you visual of what to expect when you are doing the job. Enjoy the ride, Jared
BETA PARTS 🛠️⚙️- Choose "3 Seas Recreation" for your Beta parts! Customers can now order all Beta parts and accessories directly from the Beta USA website. All parts inventories are in real-time. Customers can choose shipping options and the best part, selecting their preferred dealer.
Why choose 3 Seas Recreation as your preferred dealer?
-We have spent over $40,000 this year alone on our race team, all of which are on Beta Motorcycles.
-We have produced over 300 "How To Beta Videos". All free to the public.
-When you choose "3 Seas Recreation" a portion of that sale will come back to our shop, all profit goes back into our race program and our RU-vid videos.
-Since 2011 we have been a pioneer with the Beta Brand in the USA and spend hundreds of hours giving advice over the phone for Free.
-We are BETA ONLY when it comes to Off Road Dirt bikes, all of our attention is on Beta!
-We take brand new bikes out of the show room and give full riding videos, none of this is backed by the Factory or Beta USA
Beta Parts Link:
betausa.com/accessories.html
-------------------------------------------
NEXT LEVEL
🔔 Hit the bell next to Subscribe so you don't miss a video!
👍 Like Our Videos
💬 Comment Below
🏍️ Enjoy The Ride, Jared
-------------------------------------------
#3SeasRecreation #BetaMotorcycle #3SeasNation

Спорт

Опубликовано:

 

12 мар 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 70   
@TheHemiphil81
@TheHemiphil81 Год назад
These beta,s in my opinion are the best looking bikes made today. I'm currently saving to buy a beta 500 rr-s. I love these beta,s..
@3SeasRecreation
@3SeasRecreation Год назад
Thanks! I hope you can reach your goal! Thanks, Jared
@bergoff
@bergoff Год назад
This is the other reason why I bought a Beta 300. Easy topend refresh unlike a 4 stroke. I can’t wait to get some more hours on it.
@3SeasRecreation
@3SeasRecreation Год назад
The Beta 300 motors last a very long time with just simple maintenance and a smart rider! Enjoy the ride, Jared
@rahndo3534
@rahndo3534 11 месяцев назад
FYI, open throttle full while you compression test.
@ryangreen1588
@ryangreen1588 Год назад
Love these videos! Explained and edited well. Cheers
@3SeasRecreation
@3SeasRecreation Год назад
Thanks for checking out our channel! Enjoy the ride, Jared
@late828
@late828 Год назад
The timing of this video... I`m just about to do my first ever top end rebuild (Beta 300RR) and this video pops up! Thanks!
@3SeasRecreation
@3SeasRecreation Год назад
Haha awesome! Thanks for checking out our channel! Enjoy the ride, Jared
@johnpaul2336
@johnpaul2336 6 месяцев назад
Damn that shroud looks gooood, love it
@VA-NJdevilsfan
@VA-NJdevilsfan 6 месяцев назад
Great video very helpful, thanks! I gotta get some parts from you as a show of support.
@AntiStressKit
@AntiStressKit Год назад
excellent video, thank you for sharing
@3SeasRecreation
@3SeasRecreation Год назад
Thanks for checking it out!! Enjoy the ride, Jared
@anthonydutra8000
@anthonydutra8000 Месяц назад
I'm doing a top end on my 2022 300 race edition and the stack of base gaskets that came off the bike measure over 1mm.. that seems almost too thick, but it came from the factory that way.. I suppose I should just get the decking tool to measure the clearance on top of the piston instead of just stacking a bunch of gaskets with the new piston. Thoughts?
@3SeasRecreation
@3SeasRecreation 8 месяцев назад
BETA PARTS 🛠⚙- Choose "3 Seas Recreation" for your Beta parts! Customers can now order all Beta parts and accessories directly from the Beta USA website. All parts inventories are in real-time. Customers can choose shipping options and the best part, selecting their preferred dealer. Why choose 3 Seas Recreation as your preferred dealer? -We have spent over $40,000 this year alone on our race team, all of which are on Beta Motorcycles. -We have produced over 300 "How To Beta Videos". All free to the public. -When you choose "3 Seas Recreation" a portion of that sale will come back to our shop, all profit goes back into our race program and our RU-vid videos. -Since 2011 we have been a pioneer with the Beta Brand in the USA and spend hundreds of hours giving advice over the phone for Free. -We are BETA ONLY when it comes to Off Road Dirt bikes, all of our attention is on Beta! -We take brand new bikes out of the show room and give full riding videos, none of this is backed by the Factory or Beta USA Beta Parts Link: betausa.com/accessories.html ------------------------------------------- NEXT LEVEL 🔔 Hit the bell next to Subscribe so you don't miss a video! 👍 Like Our Videos 💬 Comment Below 🏍 Enjoy The Ride, Jared -------------------------------------------
@HarissonRacing
@HarissonRacing 5 месяцев назад
the stock cylinder head is a separeted insert?
@Adriftimages
@Adriftimages 10 месяцев назад
Nice video! Thanks! My 23 300 has 80 hours on it. Hard trail riding. I was thinking about a top end this winter. Is it common to just replace piston and rings? What and when do you recommend? Many thanks
@jaromhubbard8962
@jaromhubbard8962 7 месяцев назад
Going to rebuild my 2021, 300 RR. Do you sell that gasket gauge that you used on top of the jug?
@cepope
@cepope Год назад
What’s you recommend on doing a top end ? I have a 2022 300 rr with 1000 miles
@mellowr1
@mellowr1 4 месяца назад
Great video. I have watched it a few times now as i'm going to be doing my XTrainer top end soon. Would be good to see the process if you are reusing the old cylinder, ie measuring, checking, honing etc👍🙂
@3SeasRecreation
@3SeasRecreation 4 месяца назад
Thanks for checking out our video! The old cylinders all get sent out to get replated. We send the cylinder with a new piston so they can match the cylinder to the piston. Enjoy The Ride, Jared
@mellowr1
@mellowr1 4 месяца назад
@@3SeasRecreation thanks for the reply. So if the bike has an "A" Piston do you not fit a "B"? You just get it replated for an "a" again?🤔
@gymratt88
@gymratt88 2 месяца назад
ref. 15:30 power valve cover reinstall. I've not taken mine apart and it leaks quite a bit .. my dealer recommended using a sealant on that small rubber gasket. Anyone else have this going on?
@user-co2zk7qx1b
@user-co2zk7qx1b 6 месяцев назад
is there any difference between doing a top end on a 250/300 vs a 200rr ?
@zteague1974
@zteague1974 9 месяцев назад
Great videos guys. 2 THUMBS UP! Can you try a 300 set up on the 250 and see if it works?????
@3SeasRecreation
@3SeasRecreation 9 месяцев назад
Good Evening, they literally just came out with a 300cc engine kit for the 250's! Enjoy The Ride, Jared
@AlsRides
@AlsRides Год назад
Awesome vid! Always enjoy your content. Wondering if you'd do a top end rebuild video on a 4T model? Would be interested to see the process!
@3SeasRecreation
@3SeasRecreation Год назад
Good Morning! As soon as we have a 4 stroke in the shop that needs it we will do one! Enjoy the ride, Jared
@johnvanv
@johnvanv 6 месяцев назад
Hey Jared, how many hours would you suggest before doing the top end of a 4 stroke?
@janot3661
@janot3661 Год назад
Great Video. Thanks you. I would like to ask you, after how much engine hours you did the replacement.
@3SeasRecreation
@3SeasRecreation Год назад
Good Morning, thanks for checking out our channel! My recommendation is just to keep an eye on the compression of the engine. Every tester will be different so use the same one every time. This is a race bike and was 100% fine but we wanted to do it for the new season. Honestly he probably could of gotten another season out of this top end. Enjoy the ride, Jared
@davidscerbina3066
@davidscerbina3066 2 месяца назад
Will pulling on the power valve actuator arm while disassambling mess with the assembly down behind the clutch cover?
@3SeasRecreation
@3SeasRecreation 2 месяца назад
Good Morning, good question. No you will be 100% to pull the power valve arm off and let it rest. Enjoy The Ride, Jared
@perrygibbons1816
@perrygibbons1816 Год назад
If you just change the piston and the cylinder is good, can you just measure the base gasket and the new gaskets until you have the same measurements as the old gasket and use that for clearance between the head and top of piston
@3SeasRecreation
@3SeasRecreation Год назад
Good Morning! That is a good idea, but we still recommend grabbing the inexpensive Beta tool that measures the clearance. Also, in the video I thought it would be best if I show it. Enjoy the ride, Jared
@brysonmaltby1311
@brysonmaltby1311 4 месяца назад
Where do I get the little beta tool to measure the gap?
@3SeasRecreation
@3SeasRecreation 3 месяца назад
It can be ordered for sure! Give us a call if you need one! Enjoy The Ride, Jared
@mimrans41
@mimrans41 7 месяцев назад
hi under the cover i see 21 mark it is not look like A/B what piston do i need? thanks🎉
@3SeasRecreation
@3SeasRecreation 7 месяцев назад
Good Morning, there will be an A, B or C Stamped somewhere under one of the power valve covers. Just keep cleaning until you find it! Enjoy The Ride, Jared
@motovalleyenduro
@motovalleyenduro Год назад
Do you ever put a B Piston into an A cylinder? Seems to be common practice but I still wonder if it’s a good idea.
@3SeasRecreation
@3SeasRecreation Год назад
Good afternoon! Honestly I have not tried that and not sure that I would. If I am ever unsure I send both the new piston and the cylinder out together to get them matched . Enjoy the ride, Jared
@cd155mx
@cd155mx Год назад
Awesome vid. Curious why you did a new cylinder as well?
@3SeasRecreation
@3SeasRecreation Год назад
Good Afternoon, honestly we did the cylinder because I had the wrong pistons for the stock cylinder... I needed an A piston but I had a B piston and a new B cylinder. I will get this used cylinder sent out to US Chrome along with the other in stock B piston and they will rechrome the cylinder and match it to the piston. Enjoy the ride, Jared
@cd155mx
@cd155mx Год назад
@@3SeasRecreation thanks for the insight. Been really enjoying the Beta vids.
@chrisheiser9207
@chrisheiser9207 11 месяцев назад
What kind of wrench are you using to take off the cylinder nuts? I had to grind down a wrench to fit but then it wasn't strong enough to break loose the nuts.
@petewhitten5408
@petewhitten5408 7 месяцев назад
Was wondering the same thing! Also how will you be able to torque it on reassembly?
@chrisheiser9207
@chrisheiser9207 7 месяцев назад
@@petewhitten5408 I tightened mine until my grinded down wrench started opening up. A friend of mine said his snap on wrench fit fine.
@niklasv6310
@niklasv6310 Год назад
I got question:) can u change 250cc beta to 300cc just by swapping cylinder or does these have some ”kit” to do it??
@3SeasRecreation
@3SeasRecreation Год назад
Hmm that is a good question and one that we have never tried to do! Not sure if the ECUs are the same! Enjoy The Ride, Jared
@dalepellerin
@dalepellerin 7 месяцев назад
Couldn't find top end kits on Beta's website referenced in the description above for a 2023 Beta 300rr. Is this something I can just give you a call and order? Thanks
@3SeasRecreation
@3SeasRecreation 7 месяцев назад
Absolutely! If you live within the USA I can drop ship parts straight to your house. I know everything you will need to get the job done without looking it up! Thanks, Jared
@toddkroll321
@toddkroll321 Год назад
Another great video. I have a question on shortening the mufflers on these bikes. I'm trying to get a brand new 2022 300rr home this spring. I want to shorten that can but what does it do to torque down low?
@3SeasRecreation
@3SeasRecreation Год назад
Thanks for checking out our videos! Honestly I am not sure how the power is affected, the bike gets louder but I don't feel a ton of difference in the power. Enjoy the ride, Jared
@toddkroll321
@toddkroll321 Год назад
@@3SeasRecreation Perfect, thankyou. Off it goes 😄
@Rieju-Sherco
@Rieju-Sherco Год назад
So I own a 2016 Beta 300RR Race, I run non ethanol and av gas mixed, and my oil is Motul at 3oz per gallon, she has 60hrs should I let the top-end go to 100hrs. ???? Allen
@3SeasRecreation
@3SeasRecreation Год назад
Good Evening, as long as you have changed your air filter when needed I would absolutely let it go to 100 hours. It's never a bad thing to do a compression test every so often to have notes. If compression starts to slip then it's a good idea to do the top end. Enjoy the ride, Jared
@damarpo5467
@damarpo5467 Год назад
Allen i have 2014 KTM 300 with 120hrs, have parts to change but going a little longer. Run amsoil and change air filter every race. i think you will be good. Rock on!
@Chris-uh3cm
@Chris-uh3cm Год назад
NY?! Where’s there to ride up there ?!?!?!
@3SeasRecreation
@3SeasRecreation Год назад
Nowhere lol Private land and going to the races. Enjoy the ride, Jared
@xeavm_1636
@xeavm_1636 11 месяцев назад
Help my gasgas ec 300 break the O-rings on the cylinder head
@nikleban9764
@nikleban9764 Год назад
i have 160hours on beta 300 with original piston
@3SeasRecreation
@3SeasRecreation Год назад
That is a common story! These things are crazy good! Enjoy The Ride, Jared
@jesserichter7560
@jesserichter7560 11 месяцев назад
Why change cylinders? Not very many hours on it I'm just wondering should I wanna do this I usually rock my shit for Lil while
@fatherturtle
@fatherturtle Год назад
I hate to be that guy but... You did the compression test wrong. The first test the throttle was never open when cranked. The second compression test after the piston change, throttle was wide open. You can hear the sound difference between tests also. That would explain why there was such a compression difference.
@3SeasRecreation
@3SeasRecreation Год назад
Yes we caught that as well lol. We did it again afterwards with the throttle closed and it was 175… drew would of won the cookies !
@fatherturtle
@fatherturtle Год назад
​@@3SeasRecreation awesome, great content. Keep the Beta knowledge coming. I've never seen the Beta gasket thickness process. Did the tool come with the topend kit or do i need to purchase it separately? I hope it wasn't stated in the video and i missed it. Great video again, I'm a subscriber.
@damarpo5467
@damarpo5467 Год назад
Best hot or cold to test...and should a new rebuild be seated in first before testing to let ring seat?
@user-do4pz3xo4k
@user-do4pz3xo4k 6 месяцев назад
.005mm does not exist on a feeler gage..
@aidanodonnell5752
@aidanodonnell5752 6 месяцев назад
Yes it does on mine at least I just did my top end today and I found .005 on my feeler gauges
@justinlocke6571
@justinlocke6571 4 месяца назад
0.05
Далее
How To Rebuild the Top End on a Beta 125 RR & 200 RR
25:44
ХЕРЕЙД БОИТСЯ МОЕЙ СОБАКИ!
37:08
Просмотров 614 тыс.
Who has won ?? 😀 #shortvideo #lizzyisaeva
00:24
Просмотров 14 млн
когда мучает жажда // Eva mash
00:58
Просмотров 523 тыс.
2-Stroke 300cc Top End Rebuild!
23:45
Просмотров 24 тыс.
Building Her DREAM Bike - Beta XTrainer 300cc 2 Stroke!
20:44
13.4 hours  --  2023 Beta 300 Race Edition
7:26
Просмотров 21 тыс.
Tech Tip: Two-Stroke Top End Rebuild YZ125 - MotoUSA
17:47
Ronaldo Vs Other Players ☠️
0:42
Просмотров 8 млн