Thanks for this. Absolutely blows my mind that I can stream games at Ultra settings from my PC to my deck over WiFi 5 with no noticeable latency... Super cool!
Moonlight is so dang awesome! The only disappointing part is how bad Steam Remote Play and PlayStation Remote Play are in comparison. I never get disconnects or compression artifacts with Moonlight or Parsec, but other services are almost unusable, when it should be possible on the same network
@@brad7957 Could be, PS5 has 10 teraflops so it seems like it should be alright for light h264 transcoding. Maybe it's relaying to Sony/Steam servers. Idk, hopefully with Sony's upcoming streaming handheld, they improve the software side of things. I'm sure Steam will improve and Steam's implementation is not that bad except for disconnects and slowdowns
@@EhurtAfy Thanks for the info on Parsec. I just tried it a few hours ago on a beefy 13900K with 64GB RAM, and a 4090 for Pete's sake. It still gave me terrible performance and artifacts left right and centre. I will try this instead. And for the record, I was replaying on a MacBook Pro Max (M1) over Wifi 6 which gave me a ton of drop outs, literally unplayable. Tried over 2.5Gbps wired in, and it was way better, but artifacting was terrible. How does Moonlight handle the Xbox controller?
IMPORTANT NOTE: You have to enable UPnP in Sunshine to stream over the internet (as opposed to just streaming on your LAN). This was working great for me at home, but was unusable away from home until I figured out the need to change this setting. Maybe this is mentioned in the video, but I didn't spot it.
Your router just needs to support it. It stands for universal plug and Play basically the application can open ports on your firewall automatically so it can function properly. @@joelholland9129
A couple things for folks having a tough time getting the "add games" part working at 8:00 - if you press shift + right click on your game shortcuts, you will have the option to copy the path of your shortcuts to paste into the Sunshine detached commands box. Also in Sunshine, make sure you click the little green plus sign, and then click save at the bottom.
@@kurs3d280 Make sure that you have followed the instructions very carefully so that you have the proper text in the detached commands box. Should be exactly this: cmd.exe /c "paste the game shortcut path here in quotes"
Thank you so much for this! I’ve been using XCloud streaming and this saves me money, makes me use Gamepass more, and breathes new life into my Deck :)
Thank you for this incredible helpful information I dropped your first like and then I shared the video on my Facebook page of the same name which is a tradition of mine for all the great gaming channels this year! I got my steam deck Saturday it’s the greatest $400 ever spent in the history of time! Thank God for this blessing of a device from Valve my PC died in December and there was no way that I could budget a rebuild.
Great video - subbed. For info the config and setup where you enter a un and password is now automated on the windows installer which will bring you to around 4:08 in the video
Dude thanks so much for this!!!!! I can play Baldurs gate on my couch while my partner plays Hello Kitty Adventure next to me…this is a dream come true lol. I am not savvy with this kind of thing usually and you make it very simple to understand! Thanks again!
Now I can finally play Cyberpunk for more than an hour at a time! It even made my custom modded maps for black ops 3 zombies more stable to stream. Thank you!
This worked without issue. Thank you. The only thing I had to troubleshoot was moonlight not detecting my pc, but a quick google search and fixed the issue.
Great video, I have to try this out. I have just been streaming games through Steam. I like that this gives me access to my desktop, it opens lots of possibilities up.
For those experiencing the “Connection Terminated Error -1” like me every time you connect, I found the culprit to be an audio device, strangely. If you open up your audio devices by right clicking the sound symbol on your PC (windows tray bottom right of screen) I had two audio devices called something like “Steam microphone” and “Steam stereo”. When I deleted these two devices, I was able to connect fine with no problems.
Working good for me so far it took ages to get it running smoothly but I finally did it. I also set up Tailscale so I can experiment with WiFi streaming because I'm upgrading to a range of 400-600 mbps WiFi speed in 4 days when I'm currently on 150mbps (its serviceable, latency is pretty much infrequent). LAN seems to be pretty fine as it is as well. But I want to get the best experience possible so I don't have to really game directly on my PC again and just game around the house. This also means I can stream emulated games from my PC to my Deck. I don't need them natively to drain the battery life and heat up the Deck and also not run as well as my PC can. Also storage is limited on the Deck so this is perfect. If only the Steam Deck had an OLED screen, it would be pristine.
@LEE-ty8vq thanks for lmk. I probably won't buy it anytime soon though as I have 0 time to play games due to work... but I'll definitely look out! I'll buy it in an addition to my current deck and could do a side by side when the time comes.
Moonlight works great for me on the deck with one pretty large caveat. If I put my steamdeck to sleep while its running moonlight and then wake it back up I get signed off my desktop for steam. In fact it seems to happen if any non-steam game is open on my deck when it wakes up. Seems like a bug, I know its supposed to do that if you are running steam games but it's not supposed to happen with non-steam games. I have a ticket open with valve so hopefully they have some tips.
I was just using this on my amd pc with my phone that has a 120hz display. I was able to stream at 120hz making me question my Steam deck ownership. Until I realized the gyro didn't work and the performance messed with me a bit. After that my hand started cramping up and I realized how great the deck was. 😊
it's been 3 weeks using Moonlight Sunshine my experience are I N C R E D I B L E now i can do everything on my main PC without comprimise! for example when i travelling
Great video, man, but what I really wanted was to project the contents of the Deck on pc. Every guide I search, specifically for that, only shows the other way around, sharing a windows screen on the Deck. Is it impossible to share Steam Deck's screen with a windows pc without using steam connect?
Steam Deck controls won't show up in steam on remote PC how do I fix this?!...it literally says no controller recognized ...controls work fine on remote desktop and in Steam OS (Big Size) as soon as I enter game the left stick doesn't work and the A,X button brings up onscreen keyboard
Had nothing but problems with Sunshine/Moonlight between my PC in the office & steam deck in the living room. Have a direct network connection to both. Of course steam deck dock constantly has to have power unplugged. Also have an HDMI cable run from PC to living room AVR. I'm guessing it's the AVR that's the issue. The sheer amount of nonsense I had to go through to get it to work was maddening and it was through Steam streaming. It absolutely did not want to work in Game mode on Steam deck but the games would show up in desktop mode. Would be willing to pay to a company that could get everything to work one click. This tech has been out forever. Doesn't seem worth it if Nvidia is shit canning the concept out of greed to push people to their paid monthly subscription model. Scumbags. All that being said when I got it streaming to the Steam Deck/Dock while playing at the full 4k resolution of the 77" LG Oled in 7.1 stereo through the Marantz SR8015 Jedi Fallen order looked and sounded amazing. Considering the LG has WebOS, which includes an Nvidia app to stream from video cards they host directly it should be possible to install a streaming app directly onto the TV that's on the same network as your gaming PC. I think there's a ton of cash for the dev who makes this happen.
Which HDMI dummy do you use for the Steam Deck? My LG monitor and RTX 3060TI card support 1440p and that’s what I’d like to stream since it’s how I normally play on my rig. Is there a dummy 1440p or dummy 800p for the Steam Deck? Just not sure which one to buy so my monitor doesn’t stay on all day.
If you're using Windows on the Steam Deck, Moonlight sucks there... there are unsupported graphic decoders there giving a terrible experience. It works silk smooth on SteamOS however.
Hey dude, thanks for the video. I'm having some issues I'm hoping you can help 1 - audio still comes out of my PC when streaming, even though I have that option disabled in moonlight 2 - no steam deck controls are working, even though I installed the vigembus
When you’re streaming a game it should switch your audio over to ‘Steam Streaming’ automatically. If that isn’t happening you’ll need to look a the VIRTUAL_SINK setting under advanced configuration and set it manually. Take a look at the guide, it’s pretty straight forward. Regarding controls not working, is it just when connected to DESKTOP, or does it still not work when launching a game or steam big picture? Take a look at the moonlight control settings
@@steamdeckguy Thanks for the reply. I wound up going to the moonlight discord. My audio issue was that the steam audio wasn't an option when I ran the audio tool in sunshine. It should have created it automatically when launching any remote play session, but it didn't. So I had to install a virtual audio cable, which accomplished the same thing. In regards to controls, apparently all I was doing wrong was not restarting my PC after running vigembus. Now everything works.
Works great, I have a random issue tho where when using AVG browser the cursor just freeze... work fine with any other browser and anything else. It used to work, idk why it's like that. Otherwise no issues.
@@steamdeckguy well i found the solution but thanks anyways. when i try to play starfield through steam with adding it as a non steam game my kishi wont work. after that i saw your adding gamepass games part in your video and when i did that i had no problem. now i can use moonlight thanks to you :)
THX, your video help me a lot, And I have some question hope you can help, steam deck's controller doesn't work on Moonligt if I want to acess my windows PC Desktop, And if I just disconnect moonlight the game will still there running on my PC(Maybe caused by the 'Detached' Commands). Do you have any ideas to solve this problem, so I don't have to use PC everytime to change games. Thanks!
You need to quit the game before exiting back to moonlight - unfortunately no way around this. In terms of desktop controls, does the touch screen work? If you hold start button it should enable the analogue stick as mouse instead. Failing that, try a good old fashioned reboot of both pc and deck - that may sort out controller issues
Hi, I have a question. everytime I end my gaming session and quit the game on steamdeck my pc doesn't end the game it still running. I don't have a problem with this before using moonlight +nvidia streaming. My issue was everytime I end a game on my steamdeck and want to play it again after awhile, there will be two of the same games now running on my pc. I also tick the "Quit app on host PC after ending stream"
wasn't working for me, unable to get inputs through moonlight on deck, touch screen will click the mouse thats it. Nothing else works, no mouse movements etc :( edit: needed to restart desktop, as well as enable right trackpad to act as a mouse not a joystick in steam controller settings on SD.
Hey does anyone have a video/guide for adding applications in Sunshine? This video didn't really help as it doesn't explain each part of adding an application, in fact it's very helpful EXCEPT for that part.
Put the path to the .exe as a command or detached command. Try as a cmd first, and if it gives error or opens and then closes, put it as a detached command instead. I suggest reading the moonlight documentation since it explains everything there.
@@steamdeckguy thank you! Yeah, I read somewhere (I think on the Sunshine documentation) that windows cmd line knowledge was needed and I said great I only really know SOME linux cli stuff! Then I learned it was pretty much the same. Had to change the drive, put in "&&", file path, "&&" again, then start DiabloIV.exe ALSO, I had to rename the exe by taking out the space, is that always necessary do you know? In any case, it worked.
Im having an issue with Moonlight when i use it to go to the viture/remote desktop ( using Mint btw ) and i open steam the controls on the deck work fine until i ope steam and open a game than the game im playing ( abd even in steam ) doesnt see a controller present if i wanna use the stand alone stick ,buttons , bumpers when mobile on my DECK ! ive tried everything can you help ?
Would Moonlight mirror to my TV better than the default Windows mirroring?Right now I'm just trying to watch streaming sites on my TV but notice a lot of log when casting to my Fire Stick from the PC.
What is a bit unclear to me, what does Sunshine bring over just adding the games to the Geforce Now gamestream section? As far as I understand, they will only remove the gamestream option from the Nvidia Shield, not from the PC software itself.
Nvidia game streaming is being removed. This means you wont be able to stream to Nvidia shield. There is no native pc streaming to other device - that’s why moonlight exists. It leverages the same nvidia streaming service but opens it up to other devices. The issue is that that will also stop working once nvidia streaming is turned off. The only way to continue using moonlight is to use it with sunshine as explained in the video
@@steamdeckguy Great tutorial, just confused. I searched for this tutorial cause I wanted to stream my PC and have a feature steamdeck doesn't support natively. The ability to have Microsoft edge read to you a document. Steam must not have the voice codecs but this video helped. Just needed it for another room without needing to lug my PC over. Plus I don't have to worry that my PC is streaming out sound. All great. But your video got me ambitious. Can you click a exe for a game on your PC and stream it and have the deck in another room and control it? I wanna play off my steam deck stuff on my PC, outside of steam and that whole rick and morol. Like I have a card game I like to play that's just from a fan sight not on steam.
I typically just play games natively on the steam deck. Since creating this video I haven’t used moonlight - in fact it’s not currently installed since I upgraded my SSD
I have some FPS drops on my Deck when in a high action sequence on the game (football) - routinely runs 60, then drops to about 15. Should I be tinkering with settings in the game/emulator or Moonlight to get a better stream?
The resolution isn’t important - it’s the aspect ratio. If you want to have the full 16:10 ratio on your steam deck then you need to set your PC resolution to a 16:10 ratio. It can be any resolution providing that the aspect ratio is the same - it will the scale accordingly. If there is a mismatch you’ll end up with black bars. In this video I was using a 1440p resolution. Hope that helps. Apparently playnite can automate resolution switching but I haven’t tried it
@@steamdeckguy that's exactly what's going on, I'm getting black bars. I'm using an AMD control panel. I'll see if aspect ratio settings are there, thanks 👍
hope you respond to my comment but anyway, i am having trouble with the controllers on Moonlight. mind you, it was already hard enough to install Moonlight on my Steam Deck due to an error popping up everytime i tried to install it. thankfully, i did a turnaround and installed it correctly. anyway, i tried playing Persona 5 Tactica on Xbox with Moonlight and yes, the controls work but is there a way to not use the mouse pads? can i just use the Steam Deck normal controls?
Had the same issue today while following this guide. What worked for me was going into the Sunshine configuration, click the Input tab and disable mouse and keyboard, leaving only the gamepad enabled. After that the game recognized the steam deck controls.
Which HDMI dummy do you use for the Steam Deck? My LG monitor and RTX 3060TI card support 1440p and that’s what I’d like to stream since it’s how I normally play on my rig. Is there a dummy 1440p or dummy 800p for the Steam Deck? Just not sure which one to buy so my monitor doesn’t stay on all day.
I have some questions: 1. How can I set switching off monitor when moonlight is streaming? 2. Can I shutdown PC remotly by moonlight? I know I could do it with start menu on desktop mode but its take some times...
Not sure about the monitor question, but for shutting down the PC you could create a command script (similar to how I launch gamepass games). Then just add that as a shortcut to moonlight
the app sure amazing. with that i can play any pc games on my phones. even emulator works on it >w< also watching youtube on my phone (not app. but youtube from my pc browser ) xD
Have you found that streaming from your PC using this method preserves the deck’s battery life since it might be doing less processing, or is it the same as if running an installed game on the deck?
@@steamdeckguy that’s awesome to hear! think i’ll do this and stream to the deck instead from now on! appreciate the quick reply and putting up this guide. thank you so much!
@@Regretevator_scag let me know how much battery life you save if you set it up! i’ve not played any aaa titles on the deck for that reason. valve should seriously consider this is a major selling point.
Not tested myself, but you should be able to add the emulator as a application into sunshine the same way you would any game. Let me know how you get on!
Sadly this does not work for me the way I wanted it to. I've been using Parsec and it's been going great. I just wanted to test the alternatives (see if quality is better, latency and all that). However my problems with Moonlight+Sunshine are simply that I cannot (from what I can tell) keep my Desktop monitors closed while I'm connected to the PC with my steam deck. That's what I want. I have Wake On Lan, open the PC and connect to start playing, but apparently Moonlight doesn't want to do this while my monitors are closed. Parsec does this wonderfully and automatically sets the resolution for the client (the steam deck 1280x800) just like it would be a monitor with that resolution connected. So do you know of a way for me to run this with my monitors closed and Windows running (and sending me) 1280x800 stream?
I’ve not done extensive side by side comparisons, but I found streaming quality to be better using moonlight, I also experienced less lag and dropouts. I’d recommend trying steamlink first - If your happy with the results then probably no reason to change.
Hey man can I just copy your command lines there for the shortcut or is it gonna be different from mine? Alteast with the first few line cmd then I’ll put the my own path on the “quotation marks”. Am I understanding this correctly? Lol, or did you really make a command prompt to have all that activated? Sorry I’m not so knowledgable with this.
Have you used moonlight in the past? If it didn’t prompt for a pin then it sounds like you may have already paired it in the past (probably via nvidia experience app).
Great video, thank you. One issue I have is that when in the stream, pressing Start + Select + L1 + R1 does not bring me out of the stream back to the Steam Deck desktop, it instead just pops up a message in the corner about "Action Set Activated Gamepad" and "Action Set Activated Desktop". I just have to hold the power button for 2 seconds and it brings me back to the desktop and says "Connection Terminated". It's not a big issue, but I cannot seem to work it out.
Not true. This is the streaming resolution. Setting it higher than 720P is pointless and you’ll likely get stutters. If you have a decent Pc you can set a higher resolution in game to get supersampling, but it won’t be blurry. If it is, then you may want to drop the video bitrate
@@steamdeckguy Nope. You have zero idea it seems how Moonlight and Sunshine work. If you dont set the same resolution on client and server you get stretch and blurry result or black bars. nothing you want. Obviously this is even more critical here because of the 16:10 nonsense. you need a 16:10 resolution on the server.
@@bestonyoutube I have no idea, yet you came here to watch my video? OK… Fact is, If your PC is set to 16:9 ratio (in windows) and you stream at 720p the game wont look blurry on the deck and you won’t get black bars on the side. Of course, if you have a super fast Wi-Fi connection then be my guest - set it to max. The point I’m making is that for most people it will look fine in 720p. Changing resolution in game will improve the visuals without impacting streaming performance. FYI when I did this video, my desktop resolution was set to 1440p, the game to 1080p, and moonlight streaming to 720p - all 16:9 ratios
@@steamdeckguy Sorry you dont know what youre talking about. 720p is 1280x720 the Steam deck has 800p so it needs to be stretched which makes it blurry. maybe check your eyes? 1080p is just a multiplicator of 720p not 800p, same for 1440p, same result even worse because of not multiplcator by 2. you can configure Sunshine, that it executes a batch file which automatically sets the resolution to 1280x800 so it is native resolution and changes it back to for example 1080p when you disconnect, but obviously you knew this right.
@@bestonyoutube Jesus Christ. Please stop. Yes, the steam deck is 800p, but we are talking 720p here. 720p can display natively on the steam deck, you just get black bars at the top and bottom (not a big deal) BUT it’s definitely not blurry or stretched as you seem to be suggesting. If you want full screen 800p then as I said you need to set PC resolution to a 16:10 ratio. Using a batch file is one such method, so you are actually saying the same thing….but being an asshole about it
Is it safe to use this Moonlight/Sunshine thing? I mean, you are opening yourself to remote access? Can developers or third party devices use it to take control of your pc? For example if i use chinese projector Magcubic HY320 and hook it up to my router and than install moonlight on it, will it create a security loop?
I'm unable to figure out if i can use this to navigate the steam deck desktop mode through my pc (and maybe transfer files). I enjoy my steam deck but the desktop mode is s slog to navigate using only the steam deck. Any advice is appreciated.
You can control the steam deck in desktop mode using the keyboard and mouse connected to your pc -a that is the main benefit of this. Unfortunately you can’t drag and drop files between PC and steam deck. You’ll need to setup an FTP server or just use a thumb drive or portable SSD
I have the problem. that I have black bars at the top and th ebotton. i tried everything including chanigng the resolutions. But unfortunetaly nothing helps. What can I do, that my Steamdeck stretches the picture out?
i can launch and stream my PC's display to my steamdeck but none of my steamdeck controls work. the newest version of Sunshine doesn't automatically suggest ViGEmBus (as another commenter pointed out), I've tried it with and without ViGEmBus- not controls. I can't even use the trackpad to control my mouse cursor in desktop mode. Seems like this tech is really cool but definitely not ready for prime time.
Any tips for configuring network settings with this set up? I have a 1 gig connection at home and have issues daily when connection gets bogged down or won’t connect to PC at all. I sometimes get the RTSP handshake when this issue creeps up. Any advice at all would be most appreciated
You have to remember remote playing your PC to your steam deck in another room uses your internal WiFi - your internet speed is irrelevant. Therefore you’ll want to make sure you have a strong signal, that is not on a busy channel, and ideally at least 5GHz (6 GHz even better). Most of the routers you get free with ISP are rubbish, so you may want to consider investing in a better one. Sometimes mesh networks can cause issues too, so keep that in mind.
Sunshine was giving my computer issues and i dont know why i was on the game one day and randomly the app started making my wifi shut off completely and my mouse waa twitching for some reason and as soon as i uninstalled it i was able to connect back to my wifi and my mouse stopped twitching
for some reason i am not getting any input with the steam deck while connected to my pc. I downloaded the proper driver for game controls, and still it wont recognize input, i can see the screen fine.
Im having an issue adding moonlight to steam, it doesnt show up in the application list, and i cant find it in browse. I have tried right clicking the application and clicking "add to steam" but it just pulls up the same "add a non steam game" menu
I am not sure about this but my game pad was not working, and I spend hours trying to figure it out. In the end I just downloaded 360 driver and fixed vgiembus and click to use 360 drivers. Then it worked perfectly. Apparently the standard windows does not have the x box 360 drivers. Also I think that Chinese gamepad might have this problem not the very very expensive microsoft xbox controller. If it last I would not mine but seeing alot of reviews the Microsoft gamepad usually last one to two years.
@@steamdeckguy if its a Chinese controller then you will have problems. Mine showed as a hid compliant device. After install showed xbox controller. Dont use the Xbox drivers in moonlight.
I play fallout 76 from my can with my steamdeck moonlight. I set it up to 1280x800 12mb rate for good quality. One question can I play it on the go? Sure I can get it installed locally via steam store but my friends have it on microsoft store so I got it that way. From what I heard steam and microsoft store version are not cross?
Apparently if you are using sunshine you just need enable the UPnP option in the Sunshine Web UI. I’ve not tried it myself, and actually no longer have a windows PC, but let me know if it works! If it doesn’t, it likely means you need to change some network/router settings.
Hi, i have a 4k monitor, but when i want to play the games through moonlight in steam deck, my pc still use alot of power. Should i change the resoultion to 720 for game? Or how should i do to not consume alot of power if i play my games through moonlight.
How do I add Moonlight to gamemode if it doesn't show up within Steam in the add non-steam games dialogue?? I've installed via discover all fine but steam can't seem to detect it..
Hi, i've followed your guide and it's amazing! Btw i wanted to ask you if it's possible playing on steam deck while turning the monitor off. If i do this, my steam deck screen turns black, so i have to keep the pc monitor on...is there any possible solution to this?
You could try switching your monitor to another unused input (e.g. HDMI 2) rather than turning it off. That way, it’s technically still on so should still allow streaming but display a black screen
Whats the pov on your pc when you’re moonlight streaming? Showing the same display as your handheld device? You cant use your pc while moonlight streaming?
Hello! Can I use Moonlight on another network besides the one of my house? Example: Can I play my games if my deck is connected on a hotel wi-fi, officer wi-fi, my mother's house wifi, etc or is mandatory to be in the same network to use it?
In theory yes, but it’s not something I have done. I’m assuming you’ll need to play around with router and firewall settings to get it to work outside of home - I’m sure there is some guide out there if you google
Hello my pc shows up and my games but when i try to open something it comes back with a error "GeForce Experience returned error: Streamer could not be initialized. (Error 521)"
Hey! I've been running into a problem where it always says timeout when i look for my pc's ip, is it related somehow to my pc not being able to connect to wifi? and is only working through cable connection
Rewatch the video at 9:00. You should keep the command cmd.exe /c (the c command here tells the command prompt to close after opening the link). You just need to change the path in the quotes, so if your links are in your d drive it would be something like this cmd.exe /c “D:\Gamepass Shortcuts\Hi-Fi RUSH.link”
Hey I noticed on my steamdeck, after finishing a gamepass game, the stream would continue to run (since it's running as a dettached command). I figured setting a "main" command that I could easily close was the option so it would prompt Sunshine to actually exit, but couldn't find one, so I whipped up this bash script: @echo off echo Starting program... timeout /t 10 echo Checking .exe status :loop tasklist | find /i "GAME" && timeout /t 5 /nobreak > nul && goto loop || goto exit :exit exit Save this as a .bat file and use it as the main command. Notice it says "GAME". You have to find the name of the executable using tasklist inside a cmd.exe window and what exactly tells you there, is the name. For example, for Octopath my gamepass executable is Octopath_Traveler-Win64-Shipping.exe, however I get 'Octopath_Traveler-Win64-S' using tasklist, so that's what I used in the script and voilá. This has to be done for each game you add.
ok, this is driving me mad! here with sunshine i've got the same problem as with parsec: i can run the desktop just fine from my steam deck BUUUUUUUUUUUT there seems to be no controller support. I can press whatever I want on the steam deck, the game doesn't register any inputs. any ideas?
Hello, so I’ve run into two problems 1) when I start the game it’s probably 3/4th the size of the screen on both the steam deck and the computer 2) none of my controls work on the steam deck. Please help, thank you!
Ok so I updated my nvidea experience and restarted my computer so the game loads in full screen and controls are good but I keep getting a red pop up at the bottom saying poor nitrate and to lower it. I tried going to 10 Vice the 45 you recommended and put it at 30fps and still terribly choppy.
This means you have a poor Wi-Fi connection. Make sure your pc is connected to router via Ethernet, and that you are not too far away. Then try with the lowest bitrate and work your way up… 45bps is probably too high for your connection
Im having an issue when I connect to steam or my desktop I have two big horizontal black bars on the top and the bottom of the screen. Im not sure if this is because I have an ultrawide monitor but im not sure how to fix that.
