Better Performance from a PW50 WITHOUT having to add power! | How to install heavier clutch springs 

I was literally about to say this ! All japanese brands that have any screws are usually J.I.S. same with water craft and atvs! Especially on the older models with carbs! If you don't have jis set . Then use a impact hammer screw driver that's the 2nd best option never fails but you maybe replacing the screw lol

Yes! A must-have for working on Japanese bikes

It’ll do it. Stiffer springs are more or less to let the engine rev a little higher before it engages

I wouldn’t say faulty, no. Centrifugal clutches will do this in nature

In the description they are from peeweecycle

A

Both springs were new

Good! Better for racing as it puts the engine into the powerband before the clutch engages

Thanks! I just put some in my sons PW too. The bike is still apart but I’m curious to hear your review!!! Also I have 2 sets of the cannon race craft springs if you hear of anyone interested. I have a 35lb set and a 45lb set. We needed up having custom rear shocks made.

It’s on my Amazon list

I have the link in the description to the springs

Probably not, but we never did ama sanctioned races, just local fun runs

Sorry, it was really old footage and I didn’t have the follow up ripping filmed

Always someone who has to crap on a person

Also using a#2 screwdriver. A #3 works damn fine

@@4thdimensiontravels855 Not on Japanese phillips heads, you should use JIS screwdrivers. How freakin tough is this to comprehend? Then you complain about stripped heads...

@@racerx2084 No... its called wrenching on Japanese engines for 30 years...

Bc people only know about Phillips heads bc when they go to Ace, Home Depot or Lowes they see metric sockets n wrenches but don’t see “metric” screwdrivers. I too have been in in the field for a long time and until I went to a mechanical trade school I didn’t realize the difference neither. But after a long time doing mechanics I know that quality screwdrivers like snap on n mac work a lot better than a cheap screwdriver. But a lot of people who are wrenching on these little pws are dads trying to get their kids bike running and they are watching RU-vid videos to figure out how too. But simmer down, and don’t be a dick. Just reply and say a good quality screwdriver or getting a jis style screwdriver will work better and is worth to have if your doing a lot of mechanical work. It’s that simple.