BETTER THAN A BRUSH HOG? HYDRAULIC HAMMER BLADE FLAIL MOWER! 🌻

Подписаться 210 тыс.

Просмотров 72 тыс.

50% 1

WANT TO SUPPORT GOOD WORKS TRACTORS? CHECK OUT THE LINKS BELOW!
We love getting out in the field, and it's even better when the sun is out and temps are above freezing! Today we're running our first demonstration with the Del Morino Centurion Super offset flail mower. It's a hydraulically controlled mower that allows you to run the mower wide of your tractor's footprint, as well as angle it to accommodate a slope like a ditch bank or undulating terrain. Let's see how good this thing is with our 4066R at tackling brush and grass.
Products in video: bit.ly/3c0JQms
___
Buy Hydraulic Kits! summit-hydraulics.com/?ref=go...
BUY One Large 7" x 12" Mirror! amzn.to/2Uit8ox
BUY One Large 7" x 12" Mirror w/Bracket! amzn.to/2yMGvpV
BUY Two Large 7" x 12" Mirrors w/Brackets! amzn.to/2wZCQUF
John Deere 1025r/New Style 2025r Seat Cover: amzn.to/2OyxBkY
BUY A GREEN BALLAST BOX HERE! www.anrdoezrs.net/links/90005...
Watch this video to convert your tractor lights to LED! • CHEAP LED LIGHT UPGRAD...
SHOP: www.goodworkstractors.com
AMAZON: www.amazon.com/shop/goodworkst...
SUBSCRIBE: / goodworkstractors
LIKE: / goodworkstrac. .
FOLLOW: / goodworkstra. .
5% OFF WITH CODE GWT AT LUBE SHUTTLE! www.lube-shuttle.us/store
5% OFF WITH CODE GWT AT HEAVY HITCH! www.heavyhitch.com
5% OFF WITH CODE GWT AT MILLER TIRE! www.millertire.com
5% OFF WITH CODE GWT AT MUDD'S CUSTOMS! www.muddscustoms.com
5% OFF WITH CODE GWT AT BIG TOOL RACK! http:www.bigtoolrack.com
5% OFF WITH CODE GWT ON PROTERO DUMP SYSTEMS! .www.proteroinc.com
5% OFF SELECT PRODUCTS WITH CODE GWT AT SUMMIT HYDRAULICS! www.summit-hydraulics.com
5% OFF WITH CODE GWT ON SWEEP-ALL SWEEPERS! www.sweep-all.com
5% OFF WITH CODE GWT AT TRAC SEATS! www.tracseats.com
5% OFF AT RHINOHIDE CANOPIES! www.rhinohidecanopies.com Complete survey after purchase, mention GWT, get 5% refunded.
*Discount codes cannot be combined with any other promotions, offers, or deals!
**I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support!
This video is for entertainment purposes only. Good Works Tractors (Good Works Lawn & Power, LLC) cannot be held responsible for content found in any video. Always reference your owners manuals, use extreme caution, and proceed at your own risk.

Опубликовано:

19 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 136

@GoodWorksTractors 3 года назад

LOOKING FOR PRICING AND DETAILS ON FLAIL MOWERS? CHECK THE LINKS BELOW! Del Morino Centurion: www.goodworkstractors.com/product/buy-del-morino-offset-flail-mower-offset-flail-mower-for-sale-2/ Del Morino Funny Top: www.goodworkstractors.com/product/buy-del-morino-offset-flail-mower-offset-flail-mower-for-sale/

@ryancathey7029 3 года назад

Can you or have you done an episode on your summit hydraulic set up and just how and what you have connected? I would love to have all the options because I never want to be limited by just the two controllers I have in the rear?

@toddlee302 3 года назад

@doolittlegeorge 3 года назад

"once uze got lawnmowin' in your blood it never leaves ya'!..

@mikekenney8199 3 года назад

How much is one like in the video ?

@shohokuslamdunk 3 года назад

Saturday morning on the west coast. sitting down sipping my coffee with some pastries and watch good works tractors. Imagining the possibilities with a tractor like that. until I realized I live in a townhouse.

@GoodWorksTractors 3 года назад

Haha, never know. Life has a way of throwing us all curveballs!

@dwayneloftice2326 2 года назад

@@GoodWorksTractors ....have been a "city dweller" for most of my life until my folks retired and I bought them 60 acres of 3 YO peach trees and a JD 2040. For the next 30+ years that country life had a great influence on retirement objectives and now I raise winegrapes with a new Kubota LX2610. "LIVING" has never been so good!

@keithnavarro2930 3 года назад

Certainly gives a guy a lot more to think about. Not your grandpa's cutter. You do great, usually unbiased, reviews and opinions. Thanks.

@GoodWorksTractors 3 года назад

Thanks Keith!

@belindakt 3 года назад

That is quite the machine. Love how it goes vertical, gets rid of those low branches that scratch & ruin the resale value of that beautiful tractor!

@GoodWorksTractors 3 года назад

Haha, no doubt! Vertical is pretty cool to use.

@jim351861 3 года назад

I have always preferred a brush hog but my dad loves s flail mower. Likes the way it spreads the grass out instead of windrowers. Love you channel. Wish you had a dealership a little further south. Just bought s new Kubita M4-71. Keep posting thanks.

@Bob-vb8lc 3 года назад

Wow, you and the machine did a great job. It's always good to see your videos. I love this channel.

@GoodWorksTractors 3 года назад

Thank you Bob!

@dalepeters9638 3 года назад

That was a very good demonstration of what a flail mower can do it looks great thanks

@GoodWorksTractors 3 года назад

Thanks Dale!

@ralphjelomono9068 3 года назад

Great demo. Nice mower. The offset features are just awesome. Very tempting to consider this

@GoodWorksTractors 3 года назад

Thanks for watching!

@1967GALAXIE500 3 года назад

I am looking forward to seeing a great flail mower

@nickc2530 3 года назад

Cut it up real good. What a great machine.

@GoodWorksTractors 3 года назад

Yes, worked really well. Thanks for watching!

@videobob 3 года назад

All attachments come with a learning curve, based on your personal land usage and how to experiences. Never is two property’s are the same. A very useful attachment you might try is a hydraulic top link.

@BobsOutdoorActivities 3 года назад

Pretty cool. I will be interested to see how it does this summer for example in waist high field grass.

@noelcahill6707 3 года назад

Great video as always mate here in ireland a britain we use the flail on the front of the tractors we can get front pto and linkage from a 1 series up after market kits but id say would be very popular with yerselfs in america you can also put a 3rd knife between the 2 grass knifes and verti cut with them

@DJUKETOP Год назад

Nice job.

@kylerayk 3 года назад

That thing works like a mini forestry mulcher!

@danielmoore6507 3 года назад

Watching your channel helped me decide what brand of tractor I should get. You do a good job with the educational part

@GoodWorksTractors 3 года назад

Awesome, thanks for watching!

@jean-philippegagnon9189 3 года назад

I hope you got a Deere... hahaha

@danielmoore6507 3 года назад

@@jean-philippegagnon9189 got a 1025r. Small enough to do what I need and what I could afford. Got it almost a year ago and put almost 60 hours on it.

@jean-philippegagnon9189 3 года назад

@@danielmoore6507 one of my customer had a kubota bx and sold it to buy a 1025R only because of the treadle pedal. I guess you either love it or hate it.

@hughhead9079 3 года назад

Great episode on what that upper end 2-plane flail can do. Especially nice job cleaning up the uprooted trees next to the trailer (from the stump bucket episode?) at the very end... talk about nail-biting suspense for us A.R. landowner types! ;-)

@GoodWorksTractors 3 года назад

Haha thank you sir! Have a great weekend!

@claudenormandeau9211 3 года назад

Not to long ago we would just burn this off but today with all the air quality standards and climate change we have had to adopt to new ways to maintain our properties, This Flail Mower is certainly one great way to clean up a property. Keep in mind it is common to start fires when hitting rocks with mowers. Here on the Alaska Highway they shut down mowing operations along the sides of the Highway during the dry season after many fires had raged out of control very quickly. Your Mower did an excellent job.

@GoodWorksTractors 3 года назад

Thanks for watching Claude!

@mr.gtmsworld2494 3 года назад

I just luv that tractor’!!!!!

@GoodWorksTractors 3 года назад

Haha, me too. Thanks!

@royjackson9576 3 года назад

That is one GREAT mower! I have a Caroni flail, but the offset capability of the Del Marino is fantastic! There are areas I need more offset then the Caroni allows (the Caroni doesn't offset hydraulically, it has two positions to rig the 3PH frame) I've been considering a hydraulic offset flail for a year or two...and I think I've found the one I want... Great video...thanks for posting!!

@GoodWorksTractors 3 года назад

Thanks for watching Roy!

@lilyt8578 3 года назад

Great video .Also liked the parts looking down from the air. The flail mower looks more and more like a way to go. That was a good area to put the stump wrecker and the flail mower through there paces. Just those videos alone should go along way in selling those two quality products . Again good job Courtney!. Tim

@GoodWorksTractors 3 года назад

Thank you sir. Yeah, that drone footage is pretty cool!

@nickthomas8400 3 года назад

tidy filming and sound quality - well demonstrated

@deanbarr5740 3 года назад

Man, what a perfect mower. Really a smooth cut too. No clumping or bogging down, just wades right thru anything in its path. Very good demonstration. I can't remember your name and you told us onetime I can't remember so I'll just call you Frank. Love your videos Frank 👍🇺🇸

@robertmanley6102 3 года назад

I think his name is Courtney.

@GoodWorksTractors 3 года назад

Haha, Frank the Flail mower

@GoodWorksTractors 3 года назад

bingo

@DKrage01 3 года назад

The offset flail looks easy to clean up to the tree trunks while keeping the tractor cab out of the lower limbs. My batwing extends wider than the tractor but not as far as this flail mower. I really have to be careful not to damage my cab. Nice setup!

@GoodWorksTractors 3 года назад

Definitely. I really like how it extends so far out.

@BigInjun05 3 года назад

Levels put the ground nice

@markschmaus5580 3 года назад

Pretty cool ➡️🚜

@SummertymeJamz 3 года назад

Morning Buddy

@markschmaus5580 3 года назад

@@SummertymeJamz Good Morning my North Eastern Michigan Friend !!

@dunbartuason5443 3 года назад

Wow never seen that before ?

@tractorsnfasttrucks 2 года назад

3 questions: 1) How well does it handled hitting a a big rock, uneven surfaces, or mud? My yard is a mixture of grass, weeds, marsh, brush, and lots of rocks. If like to start clearing it and was hoping I could use something like this. The offset would also be useful since I have lots of ditches and ledges. 2) What size flail would be suitable to a 1025r? 3) Which brands do you consider to be the most reliable?

@russbowman6801 2 года назад

Scaled down to my 45 hp, this looks like mowing highway ditches is possible at my place. What angle going down could such equipment handle?

@dwayneloftice2326 3 года назад

The flail mower is a very compelling mowing attachment to consider! Especially the hydraulic articulating model. Flat land, sloped land, ditch banks vertical hedging, grass and weeds, small stickups.....just what does it not do? But then, rear hydraulics is must too! Almost makes brush hogs obsolete (except for cost) Geez! Just dig into my pocket deeper.

@GoodWorksTractors 3 года назад

Yes, it is quite enjoyable to have such a flexible mower. Thanks for watching!

@flash1259 2 года назад

The flail mower is an impressive piece of equipment. "just what does it not do?" you ask. For me you are on point about the hydraulics. My Kubota 3901 doesn't have rear hydraulics. So that would even add more to the cost of the additional cost of the flail mower. Also, he said the flail mower has a 2" max cut. My 6' Bush Hog brush cutter has a considerable larger maximum cut size. The limbs are a pain riding the tractor under them while bush hogging but, I'm slowly cutting a lot of them out of the way to make it easier. I'm not saying the flail mower isn't worth their extra cost but, if there hadn't been such a big cost difference I probably would have a flail mower now.

@simpleman4196 3 года назад

I would like to see one used in the summer cutting thick and tall up to 3' grass and saplings but not at golf course heights. How do they do cutting at 4 or 5" high. Thinking of replacing my brush hog with one

@ninjastar3920 2 года назад

Great video! Just bought a Kioti 5310 se and am looking for a mower for maintenance on 80 acres. I have a Land pride RC 48” for my bx24, but I am quite interested in a flail.

@mcchupka9718 2 года назад

Thanks for the great video. A flail mower like this is a luxury many do not need and at twice the cost (or more) of a bushhog it would be hard to justify.

@timziegler9358 3 года назад

Several questions: 1. Can the cutting rollers be swapped out; hammer or y cutting? 2. Did you feel that you needed to cut so low that you were scalping? Finally, I certainly like your tractor. Best wishes.

@GoodWorksTractors 3 года назад

Hmm, the big black roller on the back or the tube with the flails attached? It takes a bit to figure out how to set cut height. I got the hang of it towards the end. Was lowering too far early on.

@flash1259 2 года назад

@@GoodWorksTractors Thanks for the explanation. I was wondering why you was cutting so low in the beginning.

@brucefrancis6407 2 года назад

Do you use a float on the vertical cylinder?

@douglaspetersen111 2 года назад

you should plant a wild flower mix and clover and rye so the rabbits and deer come visit for them to see

@lesdobbe2487 3 года назад

Would a Kubota 4060 handle this and what hydr attachments are needed. If I ordered one could it be delivered to WI?

@jerryfunk8673 2 года назад

How big of flail mower can you put on a john deere 3046r

@Gilikemail 3 года назад

I get that gouging in left turns with mine too. But I think its because I don't have a float function at the rear for the tilt function. I think if the roller could float on the ground, I'd get much better results. HINT: If you can find a way to convert a rear remote to float, you'd have at least 1 customer.

@stephennowlan2637 3 года назад

Not sure if it is common with all the brands, but have seen a video that demonstrates the tilt control on the flail has a slot and you need to keep the cylinder connection centred in the slot so the tilt can float. EDIT: I just remembered it was Tractor Time With Tim that demonstrated that feature

@Gilikemail 3 года назад

@@stephennowlan2637 I've seen that type also. Unfortunately, mine has a solid cylinder connection and the manufacturer says you have to hook it up with a float function. Some run hoses to the loader ports, but I'm afraid of not having the loader weight up front when using it.

@tractorguru8168 Год назад

How do you set the cut height?

@gohumberto Год назад

Looking at getting the same model but with a manual offset, not hydraulic. My big old Brush-Hog does an ugly job and it's unwieldy on the back of my 40HP Tractor.

@simonthebroken9691 3 года назад

Thanks. I don't "need" it, not yet anyway. Still want it though.

@GoodWorksTractors 3 года назад

Haha, I get it!

@kjtraveladventures6508 Год назад

Is this flail mower in 5' too much for a JG2032R?

@lyerger8232 3 года назад

Why do flair mowers look like they are about half an inch away from rototilling? Can't you adjust the height higher than that ?

@deereboy1the1 19 дней назад

this appears to be a potentially awesome tool. I really enjoy your videos although i cant say i comment a lot. In consideration of purchasing one of these for my deere 4 series, a couple of questions arise, the first and most apparent being that when it is hydraulically extended, say down in a ditch scenario, it appears to put a heck of a load on the R.H. side lower 3 pt arm to the point where that arm actually looks lower than the left side... I would guess it would also have a load on the top link. All of the weight of the machine extended like that, while in operation... do you recommend any counterweight to the L.H. side of the 3 pt? Id hate to run one of these machines and have too much load on 3 pt to the point that I have trans case cracks or transaxle housing cracks because it has an abnormal amount of load to one side. Just curious if you or anyone you know has also had this question?

@fyrman9092 3 года назад

Any ideas for dethatching attachment for 1025r?

@GoodWorksTractors 3 года назад

www.goodworkstractors.com/product/buy-3-point-dethatcher-for-tractor-tractor-3-point-dethatcher-for-sale/

@robertmanley6102 3 года назад

How hard is it to replace the hammer blades on that mower. So far from your video I've been pretty impressed with the flail versus the brushhog. ....oops, I just answered my own question by watching the rest of your vid where you showed the up close pics of the flails. Looks like you just loosen one bolt and replace the flails, easy. :)

@GoodWorksTractors 3 года назад

Haha, yep, not too bad. Just replace and repeat.

@elricofarmer1561 10 месяцев назад

I'm looking at a similar mower, different company. Wondering how the 2 compare side by side? The unit I'm looking at for my LS6158 (49pto hp) is the Maschio Giraffa M 180 SE. Not sure your Hp on that John Deere? The thing that makes me nervous, is that I do not have the protection of a cab. I watched a lot of debris getting kicked up.

@krugford 3 года назад

Just an FYI about something I've noticed becoming common place on videos both on this channel and others, the high pitched "bell ding" sound effect that are being put into videos during the subscribe plug is a noted cause of a tinnitus spike for me. I constantly have to keep my fingers on the arrow keys while watching videos like this so I can rapidly skip these sections. Due to their usual semi random placement within the video I don't always catch them. That bell sound effect will commonly trigger a tinnitus spike for me, leading to about 5-10 seconds where I can't hear anything other than a high pitched whine. This is an extremely frustrating affliction that has no known cure and I've found myself stopping watching some channels due to this fact. If I can't sit back and relax while watching a video, then it becomes work to watch, and nobody wants more work. I like your channel and your content and I would be grateful if the high pitched bell ring sound effect would be removed from future videos.

@GoodWorksTractors 3 года назад

Hmm, sorry about that. I'll see if there's a way to modify.

@nateb8245 3 года назад

How much adjustability is there for cut height? I’d want to mow several inches higher than that

@GoodWorksTractors 3 года назад

Yes, up to 4" cutting height.

@davidgroff3355 Год назад

How many hydraulic lines attach to it?, I have a possibility of 2 lines to come off of my kioti dk40se in the rear

@joecoolcooley6160 11 месяцев назад

excellent question, sure would like to get a response or more information on actual hydraulic needs for this flail mower.

@charlesnichols1689 3 года назад

i have an unrelated question what size landplane should i use on a 1025r and do they work good thank you

@GoodWorksTractors 3 года назад

I typically recommend a 48", but could get by with a 60". I think they're great!

@charlesnichols1689 3 года назад

@@GoodWorksTractors thank you very much buddy

@petercampbell4220 Год назад

Do these make less radiator coggin chaff than a brush hog?

@marcwesley8513 Год назад

@Peter Campbell, yes,check out Shady Oaks Farm you tube video of the Peruzzo flail mower demo, the operator states the radiator/ grill stays much cleaner, after the first initial pass through the brush, then utilizing the offset feature of the mower, the tractor drives in the previous mowed path where the brush is cut and below the grill…good benefit, especially mowing in high and dry grass and brush, With my 1025R using a 48” brush hog, I was constantly cleaning out the debris screen during large area mowing, machine running hot and time consuming. Just purchased a Peruzzo 1600 fox cross ditch flail mower for my new 2038R.. too much snow to use now, (lol) looking forward to springtime. Hope this helps….have fun…

@kvaegenbjergvej 3 года назад

to close to the ground, it will cost you new hammers every year, you should tilt it 15 to 20 degrees backover so that the hammers dont hit the ground

@flash1259 2 года назад

I was wondering about that myself. Looks like he dug into the ground a lot towards the beginning. I was looking for a flail mower until I saw the difference in price and ended up with a used Rhino finish mower. I've been thinking about getting an articulating brush cutter though. I'd like to have one I could use on my Bobcat T650 but, may have to settle for a smaller one I can use on the Kubota 3901 I bought last year.

@toddrabideau5576 3 года назад

So this mower is designed to drop right on the ground and “float” on the contour of the land? I am looking for the most versatile offset type mower to keep tree/woods line at bay from encroaching fields. Kinda stuck between one of these and a loader mount mower like Laneshark. Getting tired of “backing” into the woods with a brush hog ALL the way around my fields🙄

@GoodWorksTractors 3 года назад

Yes, that is correct. Rolls on the ground and follows the contour.

@Ytiunegni 2 года назад

@Todd: I'm in the same dilemma as you were. Have woods that keep encroaching every year. Tired of the chainsaw/polesaw/hedge trimmer route. Currently looking at a Laneshark/Trailblazer, Sicklebar mower, or a flail mower. Trying to decide which would be the best. Did you ever get one of those? Any recommendations?

@brucemoore2163 3 года назад

Do you sell the TS52 Hydraulic Offset Flail Mower by Del Morino?

@GoodWorksTractors 3 года назад

I could order one

@daveschmidt5713 3 года назад

Can you swap hammer blades with Y blades on the same attachment?

@edwardabel5061 3 года назад

Good question. Can we beat the brush down with the Hammer blades and change out to Y blades for the Summer for Orchard grass?

@wraith3951 3 года назад

You can always change Y blades to Hammer blades and vice versa. It takes some time though!

@GoodWorksTractors 3 года назад

Exactly. They are bolted on.

@GoodWorksTractors 3 года назад

Yes, but plan on a couple hours to switch.

@chex313 3 года назад

A few extra passes and it's a stump grinder...LOL

@GoodWorksTractors 3 года назад

Haha, just about!

@flash1259 2 года назад

That's what I like about my Bush Hog brush cutter. It just jerks my old stumps out of the ground. I've pulled a lot out with it. Not huge one's though. Probably up to around 6" ones

@adambowhuntz 3 года назад

I think I'm not getting a brush hog anymore 👍👍

@mickey17y 3 года назад

I purchased one with the hope of getting a better cut than my brush hog. It does give a much better cut provided the area is reasonably flat.

@GoodWorksTractors 3 года назад

Haha, I hear ya!

@GoodWorksTractors 3 года назад

Awesome, glad to hear it. Thanks for the feedback.

@stan5949 2 года назад

Do they sell one of the offset mowers for 1025R ?

@GoodWorksTractors 2 года назад

Yes sir, the Funny Top Series.

@ryanabbate5881 3 года назад

What brand grapple is that?

@GoodWorksTractors 3 года назад

Here you go. www.goodworkstractors.com/product/buy-worksaver-et-etg-series-grapples-worksaver-et-etg-series-grapples-for-sale/

@ryanabbate5881 3 года назад

Thanks gwt!

@jamesbain1868 Год назад

It looks like your cutting way too low? Did you ever adjust the shoe/roller height?

@jamesbain1868 Год назад

And cutting in reverse is a big do not to do...

@GoodWorksTractors Год назад

Cutting height is fine and you can mow in reverse.

@rickeylocke8610 2 года назад

That’s the combo I want. Please help me with contacts. Thank you

@infiniteadam7352 2 года назад

Would be worried about starting a fire, its so dry and you did hit a rock, thats all it takes sometimes, too bad you can't carry water in the front bucket just incase.

@ryannickels7212 3 года назад

OUCH. My ears on the music...

@GoodWorksTractors 3 года назад

I like the music.

@csmeyer24562 3 года назад

Why not just Disc ?

@javabean215 3 года назад

A disc mower is better if you plan to make hay, since it cuts the stuff at the bottom and leaves long stalks and stems. The flail mulches everything up really fine and doesn't leave any windrows. I guess it depends on what you want to do after you mow. :)

@GoodWorksTractors 3 года назад

These are walking paths. Discs leave clumpy, uneven surfaces. Plus, this is an old parking area with tons of crushed stone and deteriorated asphalt.