BETTER THAN A YETI ?? - How to Make Your Cooler More Efficient

Подписаться 39 тыс.

Просмотров 77 тыс.

50% 1

Did you know that your cooler isn't as super insulated as you thought and you're wasting money constantly filling it up with ice only to see it melt within in a short period of time? While the body of most coolers is insulated, the lid might not be - and that's causing your ice to not last as long as it could.
The good news is there's a quick and cheap solution to this problem. All you need is a can of Foam a Fil, drill holes and some silicone to make whatever type of cooler you own into something more ice friendly. Upgrade For the Win!!
So before you go shelling out a ton of money for a more expensive cooler, try spending $5 and a short amount of your time to upgrade your own cooler and increase the life of your ice.
This video will show you how to make your inexpensive cooler better without breaking the bank!
#$5Upgrade #Upgradeforthewin
Till next time, ride safe!
Rich & Chris
✅👇 Check out the Two Wheels Big Life Amazon and gear Page for all of our favorite gear. This is a great way to support our Videos 👇👇
twowheelsbigli...
😁😍👍We hope you join us on this crazy adventure! We not entirely sure what we’re doing… but, we’re going to do it anyway… and, we’re going to do it together!
We would be honored if you subscribed to our RU-vid channel and follow us on social media.👇👇✅👍
Website: twowheelsbigli...
FaceBook: / twowheelsbiglife
Instagram @TwoWheelsBigLife
✅Our goal is to build a positive community of people who are passionate about living the life you've always imagined and striving to making your life extraordinary!
✅Who is Two Wheels Big Life?
We’re Rich and Chris - motorcycle adventurists who love motorcycle riding and camping. Rich rides a Harley Davidson RoadGlide towing a Bushtec trailer and Chris rides a BMW K1200GT.
We’re creating online content to encourage, motivate and inform motorcycle travelers.
✅We want to share our experiences with you about what it’s like living on the road from the back of a Motorcycle. It's not as easy as you’d think and we share these challenges in the hopes of helping you not make our same mistakes on your own great motorcycle riding adventures.
Join us on some of the best motorcycle riding routes and awesome destinations the US has to offer. We’re creating videos every week of our motorcycle travels along with helpful how-to videos that will enhance your motorcycle trip as well.
✅TwoWheelsBigLife, All Rights Reserved * This channel is for entertainment purposes only. We are not motorcycle or travel experts. We share our opinions and what works for us, but you should do your own research.
✅ Please be sure to SUBSCRIBE to our channel if you haven’t already! We made it easier by following this link to Subscribe @ http// / twowheelsbiglife ✅ Also be sure to hit that LIKE button if you enjoyed this video. It ALL truly helps and enables us to keep providing this content for you...our viewers. 😊🤓 ✅ If you want to be notified when we release new videos, click the little bell 🔔 next to the subscribe button. 😊🤓🌴☀️🤓
Please Follow us at: 👇👇
Website: twowheelsbigli...
FaceBook: / twowheelsbiglife
Instagram @TwoWheelsBigLife
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@1AXMRDR Год назад

I did this 20 years ago when we were boating all the time. I drilled large holes though. You need to use minimal expansion foam or it can warp the lid. Might not make it a yeti but it improves the cooler a lot! Yeti coolers are heavy, improving a cheap cooler is a good thing to do.

@franny5295 8 месяцев назад

I looked, I physically couldn't lift a full 60-75qt yeti cooler out of my suv. Which is the size that I would need. I'm not sure I could lift half of that and the added cost of wheelchair ramps to maybe drag it out only puts me at risk of being run over by my own cooler. I'm trying more to figure out if anybody has gotten brave enough to fill the sides and the bottom too. Except, I wouldn't do the body from the inside. I'd drill it from the outside because water is fickle. It can cause problems if it gets where it's not supposed to.

@ddddsd20 Год назад

Looking at the gas price in the background, now in 2023 it’s a dollar per gallon higher in Georgia 3.29 for regular, gotta love it. Thanks for the cooler hack, I never understood why they didn’t insulate the lid, I’m sure cost is the biggest reason.

@pv4669 Год назад

Paris, TX! I spent a month there one night. Haha. I used to have a customer in Clarksville.

@willcool713 2 года назад

I found a free 50 quart Coleman rolling cooler that someone was giving away. I had a 23 liter insulated foam shipping box that happened to be very nearly the same dimensions as the interior of the cooler. So I only had to carve out the places where the wheel wells took up some interior room, and I had a double insulated 23 liter cooler. I glued the foam lid into place inside the hinged lid of the cooler, the tightness of the fit took care of all the rest. I put a couple of latches on the outside, and Ta-da, a free homemade Yeti-ish cooler.

@nylamunk368 7 месяцев назад

You can do the same thing to the bottom of that cooler by insulating the sides, from the top down.

@luvs2ride4ever 4 года назад

i done the SAME THING. WORKED GREAT. I TOOK A TRIP PULLING MY TRAILER FROM ALEXANDRIA LA TO CARLSBAD NM. I USED DRY ICE ALSO PUT NEWSPAPER ON TOP INSIDE.NEWS PAPER IS A GOOD INSULATOR. AT THE CAMP GROUND IN CARSBAD TWO DAYS LATER MY HAMBURGER AND CHICKEN BREAST WAS STILL FROZE SOLID.

@suoppsdn9751 3 года назад

You can also use foamboard on the top. You notice the vallies in the top. Once you use spray foam the deep vallies in the top has less foam where the deep vallies are located, so once you add the spray foam add a layer of inch to two foam board the fill the vallies with spray foam also. I bet that makes it even better

@BMaxDesigns Год назад

Conceptually, yes... in practice I would use something like Coroplast (Plastic Cardboard like yard signs are made from) and Silicone around the edges to avoid mold.

@kevinjnaquin11 9 месяцев назад

Silicone around the rim can help try to make an airtight seal which would help keep the cold in. If no silicone you can use electrical tape as temporary seal. Did it on a cheap igloo I had for a while and it’s a noticeable effect

@elizabethpugh2685 Год назад

Years ago we wrapped our cooler with foam padding for under carpets. We could keep ice for 5 days

@lolilando 3 года назад

it could be better if you do a video with before and after.... I have seen so many videos like this, many of them with no success. I believe you, buttttt....

@othunt 3 года назад

This and reflectex insulation on the inside of lid , helped us, great videos thank you

@jkentsan 3 года назад

Very creative! I wouldn't have thought of it. Thinking outside the box - well inside the box in this case. lol

@TwoWheelsBigLife 3 года назад

Thank you! 😊

@MrLarryj1953 Год назад

Freeze the water bottles instead of Buying ice, Don't have to drain water from bottle to make room for expansion, Put in cooler in Plastic grocery bag, Put new frozen bottles in every day or so, leave the ones that are partial frozen, can refill over ice in bottle, lots of options best ice water in the world on a hot day, This is how I pack my work Ice chest for crew.

@stephdustin-ty4xd 2 месяца назад

Pre-cool your cooler for a day or 2 before hand.....if it's already chilled your ice won't melt as fast

@71160000 Год назад

Perhaps a bit off topic but many years ago I had a large aluminum center console boat and it had an ice chest locker in front of the console. Unfortunately it was all aluminum and could melt a bag of ice in under an hour. I found a cheap styrofoam ice chest that just fit inside it and after that I could keep my drinks cold all day.

@pampullen2116 Месяц назад

Remove lid You fill water in the hole in the lid and freeze the lid.

@shimasfaris2917 Месяц назад

There was a video of a guy who tested this hack and it doesn’t work

@georgedenny5919 3 года назад

I did that years ago. Works great. Also went I have the cooler in my truck or boat I always place a wet towel over it. Evaporation helps it cool.

@TwoWheelsBigLife 3 года назад

Good stuff

@flux_core_fx 19 дней назад

Thanks! Nice ZL1 by the way

@TamagoHead 3 месяца назад

Thanks for verifying my experiment! Ride safe brother!

@vics-videos 4 года назад

Wowwwwww!!! Great results! I'm gonna do that to mine! :-D

@TwoWheelsBigLife 4 года назад

It works

@balboshrooms 4 года назад

I did this to my cooler, works a treat. As a next, next level upgrade glue in styrofoam on the inside of the cooler and the roof... makes it even better, for keeping ice.

@TwoWheelsBigLife 4 года назад

Ha that sounds like a plan.

@deanwebster 4 года назад

I had no idea you could do this! Great video! Thanks for sharing!

@TwoWheelsBigLife 4 года назад

I know !! I learned they were hollow earlier that day.

@charlieswearingen500 3 года назад

I use a Rubbermaid cooler just like that. Thanks...

@jaybo516 Год назад

Put some frozen bottles across the bottom then pour your ice on your beverages. Will last even longer .

@FundedFuturesTrader 4 года назад

OMG! I was at that rally too. I wish I could have met you two. Loving your videos. Where do you ride during the cold months of old man winter?

@dj3114 Месяц назад

I did it and it made no difference at all, possibly a bit worse. My guess is that the lids are hollow for a reason as air is probably a better insulate. I put frozen packs in just for a test inside a garage (no sun) and 15 hours later, they were already starting to melt.

@andrewsapp856 10 дней назад

It will trap in the heat if you don’t pre chill the cooler first. You are supposed to throw a frozen water bottle or two in the cooler a couple hours before you put in ice so it doesn’t rob all the energy converting the heat to cold. If you look at a yeti they are completely insulated even on the lid and the instructions tell you to pre chill. Try it again I bet it lasts at least a day longer.

@dj3114 10 дней назад

@@andrewsapp856 I'll try that, thanks.

@scottyoung4583 4 года назад

Thanks for all the great videos. Love watching you guys. Leave the ice in the bag and it will last longer.

@TwoWheelsBigLife 4 года назад

👍🤯

@kevinroberts361 4 года назад

Kewl !! Hehe how much longer will it keep ice frozen now than before do you know? Like in days? Did you fill it all the way up w ice? Or just one bag at a time ? Thx! Be safe

@carlslayton9337 2 года назад

Just learned this week ago. Wish I would of seen this done years ago. Would of saved me money on ice. Cube cooler will hold ice now four days. Last about the same as my friends yeti cooler. But hundreds of dollars cheaper!!!

@mrclean28h 4 года назад

awesome we were at the 2019 Bring it home as well

@TwoWheelsBigLife 4 года назад

It was hot that day.

@mrclean28h 4 года назад

@@TwoWheelsBigLife Yes it was

@delvinbegay1502 8 месяцев назад

Fill up all the holes

@jimweigand8937 Год назад

What size drill do you use

@TwoWheelsBigLife Год назад

Just big enough to insert the fill tube from the foam fill

@HarleysDinersRides 4 года назад

Thanks for sharing, i'll have to look at my coolers and do this fix. cheers

@TwoWheelsBigLife 4 года назад

It’s an easy fix

@WindyTherapy 3 года назад

Great idea ! Who said an old dog can’t learn a new trick! (I just did it)

@MoneyMakerRealty 3 года назад

Great idea. I have a cooler I own now for about 12 yrs. Gonna this see if it seals better.

@TwoWheelsBigLife 3 года назад

Awesome. We use our now as a dry box and it keep the heat out very effective.

@Diana-xm1dm Год назад

Could kitchen and bath caulk be used to seal the holes?

@Diana-xm1dm Год назад

I am not making a suggestion, I'm asking if kitchen and bath caulk may be used because I don't know. Thanks for now.

@garyhanson4133 4 года назад

I've always said people should do this, but pay off that comes from being in the hardware business:-)

@TwoWheelsBigLife 4 года назад

Okay it’s not a YETI but definitely an improvement👍👍

@garyhanson4133 4 года назад

@@TwoWheelsBigLife ya but a tenth the price too.

@philos212 Год назад

Great idea! Does anything seep through that open hole in the middle of the board and contaminate the food? I mean is the expanding foam poisonous?

@TwoWheelsBigLife Год назад

I sealed the holes with food grade silicone after filling the top. Nothing seeped through.

@philos212 Год назад

@@TwoWheelsBigLife ok, I went back and watched that part again. I think I am going to do this with one of my cheap coolers. Thanks.

@TwoWheelsBigLife Год назад

We used it mainly as a dry box later on. It still helped keeping the heat out.

@philos212 Год назад

@@TwoWheelsBigLife that’s a good use too.

@kimberlycoltrainrsrccr2626 Год назад

This is perfect for our upcoming road trips to mountains. The cabin has a mini fridge so this will help us keep our drinks and ice so we don't use up space in the fridge so much. Thanks!

@Buck1954 Год назад

Gonna fix my cooler

@jimmiewilson1744 3 года назад

Darn me and my wife were there

@TwoWheelsBigLife 3 года назад

🤔🤔

@4xangler505 4 года назад

I wonder if putting reflectix between the black cover and the cooler would help as well. Is there room to do this?

@TwoWheelsBigLife 4 года назад

That might work. We use that box as a dry box now. It’s much cooler even when the sun is blazing on it.

@4xangler505 4 года назад

@@TwoWheelsBigLife What do you use for a cooler now?

@TwoWheelsBigLife 4 года назад

We have a Yeti that sits on the back seat of the HD.

@joezednick3197 3 года назад

Looks like you have a Mustang seat and backrest,,,,, Ocala Fl

@TwoWheelsBigLife 3 года назад

Good eye. I love my seat

@geneo9364 3 месяца назад

The lid is meant to be filled with water then freeze. this is suppose to keep it cold longer.

@Patricia-re6rs 4 года назад

That was very interesting and you still have great hair.

@TwoWheelsBigLife 4 года назад

It’s in the Genes

@carlosaircraftmechxnic2819 4 года назад

I saw the video with Adam Sandoval.

@TwoWheelsBigLife 4 года назад

👍

@ewoknative Год назад

air is the best insulator. there are other videos showing this method versus normal plastic coolers and the foam filled coolers actually caused less cooling on the inside of the cooler because they trapped heat longer due to the foam.

@TwoWheelsBigLife Год назад

Thanks for the info, but in our case it actually did save Ice

@TamagoHead 3 месяца назад

@@TwoWheelsBigLifeThe foam insulation has a lot of tiny air bubbles that insulate it from other bubbles.

@richardpassmore1 3 года назад

Cool video haha

@rmclogger9856 3 года назад

Curious why since you have solar panel why you wouldn’t just have a electric cooler?

@TwoWheelsBigLife 3 года назад

Weight those are heavy and and pull more power them we have.

@rmclogger9856 3 года назад

@@TwoWheelsBigLife makes sense -boyfriend says if your ever travelling thru SE British Columbia to totally look us up 😊

@TwoWheelsBigLife 3 года назад

Love to make it to BC.

@k.g.442 3 года назад

Solar is over hyped. Takes a lot of cells to provide a modicum of power... and only really produces at high noon summer sun. Dont buy the leftist ecology nonsense.

@josephsweeney4219 Год назад

I've had solar on my roof for seven years. Haven't paid an electric bill since installation. Will break even on the installation and purchase costs this year. I live in the Northeast - I bet I'd do even better in a sunnier location. Not leftist ecology nonsense. Just plain science and improving technology.