Тёмный

Big Block Traxxas? TRX4M with MofoRC Big Block! Install & Comparisons 

2FM RC
Подписаться 28 тыс.
Просмотров 9 тыс.
50% 1

Installing the MofoRC Big Block motor in the Traxxas TRX4M and comparing it with stock and the Furitek Brushless setup. Is this the best budget motor for the TRX4M? Let’s find out!
MofoRC Big Block with pinion for TRX4M available here
www.moforc.com/products/traxx...
MofoRC Big Block for TRX4M with Transmission Bearing upgrade available here
www.moforc.com/products/traxx...
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops! Including MofoRC!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.com/jsVeIxtdZHBb...
Amazon affiliate link
amzn.to/3aY2lK7
RCAWD affiliate link here
rcawd.com/?ref=FaSRjm2T
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
Micro Komodo with mount for Trx4m here
furitek.com/products/fur-2259
Furitek stinger combo for TRX4M here
furitek.com/products/furitek-...
Furitek lizard ultimate here
furitek.com/search?q=lizard+u...
Order from FMS site and use 2FMRC discount code $10 off complete truck purchase here
www.fmshobby.com/i0Io4gJ_t9ISDY
FMS High Speed motor found here
shrsl.com/3qqab
FMS Heatsink for motor here
shrsl.com/3qsew
Samix wheel hex available here
Injora Wheel nuts found here
www.injora.com/products/10pcs...
Metal gear diff found here
shrsl.com/3qo0v
Fcx24 Front Portal axles found here
shrsl.com/3ma33
FCX24 Rear Portal Axles found here
shrsl.com/3ma3h
Extended links for the fcx24 found here
Link kit available here
www.ebay.com/itm/334484497358...
Contact me at 2fastmattracing@gmail.com
Purchase PARTS for the Fcx24 or rtr and help support the channel here!
shrsl.com/3la45
FCX24 Portal Gears included in this set
shrsl.com/3la70
FCX24 at amainhobbies here!!!
bit.ly/3yoLwRL
Fcx24 on amazon here!
amzn.to/3nDSCfb
High clearance links used found here
amzn.to/3NfOJaj
RC4WD Stamped steel Wheels used found here
bit.ly/3ntbRbc
RC4WD Scramblers found here
bit.ly/3FT3GgA
Other upgrades found here
Injora brass wheel rings found here
amzn.to/3zVGWM1
Wheel hex extenders used found here
amzn.to/3Oh8FLy
Stock Scx24 driveshaft (long) used for rear
amzn.to/3ndGhOk
FMS FCX24 available here in yellow
amzn.to/39OSMwU
FMS FCX24 available here in blue
amzn.to/3HHAHgJ
FMS FCX24 available here in red
amzn.to/3Oyjvwd
TOOLS I USE FOUND HERE
T-handle wheel wrench I use here
bit.ly/3qst079
WORK MAT I USE FOUND HERE
amzn.to/39gcXUb
MIP .050 hex found here
bit.ly/3xOvi45
MY FAVORITE TIRES BELOW
Injora 64mm Hyrax
amzn.to/3fmOShr
Power Hobby Trail Warriors found here
www.powerhobby.com/powerhobby...
Rc4wd Scramblers
bit.ly/3FT3GgA
MY FAVORITE ELECTRONICS BELOW
My favorite SERVO for the price (agfrc)
amzn.to/3xJbb7r
Another great BUDGET servo here (Emax)
bit.ly/2SjZXUx
My favorite ESC found here
bit.ly/39jhrtc
My favorite BRUSHLESS motor here
bit.ly/3MIMEU3
My favorite BRUSHED motor here
www.ebay.com/itm/164700601353...
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~

Развлечения

Опубликовано:

 

4 янв 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 83   
@gregorholmes1837
@gregorholmes1837 Год назад
Holmes is working on a motor Im gona wait for his
@runnerbaba
@runnerbaba Год назад
You are King of Mini Crawler - thank you Sir!
@2fmrc
@2fmrc Год назад
Really appreciate that! Thanks for the comment 🙏
@ericpohlman5131
@ericpohlman5131 Год назад
Thanks, man. I immediately picked up my truck and started working on it.
@derrickwilliams2903
@derrickwilliams2903 Год назад
Will you please do another shootout once the Holmes Hobbies 180 motors are available? Stock vs Big Block vs HH 87T would be great. The HH motor is supposed to have a lot more torque (stronger magnets), so I'm thinking it will do really well with stock gears. Would be fun to see.
@aaronscott2278
@aaronscott2278 Год назад
Wow amazing video seriously appreciate all you do for the community
@2fmrc
@2fmrc Год назад
Really appreciate it 🙏
@aaronscott2278
@aaronscott2278 Год назад
@@2fmrc anytime man people don't realize or appreciate how hard it is to make consistent good content just the editing alone isn't easy
@bouncenerd
@bouncenerd Год назад
Hey Matt sorry I’ve been so quite, just getting back to things since the holidays. But I’m catching up on the videos I’ve missed. I think the big block is an extent choice for anyone wanting to touch their toes into the world of upgrades and the performance just in that simple upgrade you see a world of difference and just what is possible to do with these awesome rigs.
@Arturito2017
@Arturito2017 Год назад
Thanks for this doing this. Hopefully there will be more options in the future
@carloshnunez
@carloshnunez Год назад
The brushless is perfect 🔵🔵🔵👍👍👍🙂🙂🙂🔵🔵🔵
@danielfox3199
@danielfox3199 Год назад
Love ur honesty! And damn we definitely think a like love that upgrade keep doing this sir
@KK4PYN
@KK4PYN 4 дня назад
I put a big block in my CR18P evo rock van, turned it into a beast...thanks @moforc
@Jam-hj1ht
@Jam-hj1ht Год назад
I will say that mine performed similarly with the BigBlock at first, but after installing the bearing kit it is MUCH smoother. The driveline just has too much friction with the bushings for the crawl to be smooth imo. Also not sure if mentioned but mine came with a steel pinion pressed on when I ordered it.
@tristar3005
@tristar3005 Год назад
If you want to do a follow up video for more budget setups, try pairing the motor with a Hobbywing 1080. Great ESC for the money and it doesn't whine! My slow crawl with the new ESC and crawler gears is excellent even on the stock motor. If you do go that route it will fit much better in your one with the Furitek carbon chassis. Those stock shock towers interfere with it if you use the same mounting position.
@andrewrichey7374
@andrewrichey7374 Год назад
Appreciate you sharing Matt 👍👍😎
@daveanderson8404
@daveanderson8404 Год назад
thanx sooooo much for all the time u take to post these up, i luv all your vids. im on the fence for the big block as shipping to canada is same price as the motor itself....
@andyrichey1192
@andyrichey1192 Месяц назад
Super cool Matt, I’m here watching
@andyrichey1192
@andyrichey1192 Месяц назад
Yeah, that is what I wanna do is change over to bearings, I want to make my TRX4MT a little faster I got the F150 black. I’m really digging on it just got done installing the roll bar lights tail lights well sure appreciate the video. I’ll catch you on the next one.👍👍😎
@piercetheheavens
@piercetheheavens Год назад
Appreciate the trial and error. This motor has been on my radar since release. Mofo with crawl gears seems to be very jumpy for a slow crawl. From your videos it seems like the stock motor with crawl gears does a better job getting over large obstacles smoothly which is what I am running. Would you still recommend the mofo if the only goal is a smooth slow crawl without going brushless?
@davidkubitzki8082
@davidkubitzki8082 Год назад
Can you do a video showing how the big block is with the speed gears?
@animalpix13
@animalpix13 Год назад
YES YOUR BACK....
@pgammans89
@pgammans89 Год назад
Great video! I saw Nick released a video with a big block but bearings on the transmission and the slow crawl with the stock gears seems very different than yours. Interesting take.
@2fmrc
@2fmrc Год назад
Yeah that’s the main reason I was so surprised at the slow crawl after I got it installed myself. His seemed so much better. The bearings should make a difference I’m sure but it just seemed crazy that mine was still pretty rough.
@runnerbaba
@runnerbaba Год назад
We need Hobbywing Fusion Mini to be made ^^
@2fmrc
@2fmrc Год назад
May be in the works from what I hear 🤷🏻‍♂️
@SteadfastRC
@SteadfastRC Год назад
Somebody needs to make a 5 slot skewed stack brushed motor for these
@jdsrcs8061
@jdsrcs8061 Год назад
If you still have your XMAXX, get the traxxas link and bind the M's to it. The link is awesome for not having to go through the button pushing menu. I did it both of mine and i like it, gained some extra steering!!!🤘🤘🤘 I am thinking about pulling the trigger on the MOFO motors.
@2fmrc
@2fmrc Год назад
I actually have the link on one of mine. Just haven’t used it on these yet. Been meaning to! I need to do a vid on that soon.
@jdsrcs8061
@jdsrcs8061 Год назад
@@2fmrc You will like it. It does some of the same stuff the Furitek does. Any other rigs you plan on getting???
@seniorxj2931
@seniorxj2931 Год назад
How would you stack up the big block against Injoras 50t 50 motor?
@Aderas82
@Aderas82 Год назад
If you did not know, you can pair a traxxas tqi controller to the trx4m. The tqi with the bluetooth module lets you adjust settings on the trx4m. I set my throttle to 120% and it engages throttle at much lower input. Might help with the mofo motor.
@2fmrc
@2fmrc Год назад
Yeah I paired one just to try and it was a little better. I was really trying to find something better without the need for that transmitter. Because if you don’t already have one of those it’s not worth spending the money on one imo. Easier to just ditch the Traxxas esc to me lol
@Aderas82
@Aderas82 Год назад
@@2fmrc Fair enough. Already had one since I got my TRX4 first.
@danielfox3199
@danielfox3199 Год назад
Ohh I forgot. Much love from Michigan!
@2fmrc
@2fmrc Год назад
Really appreciate it!
@matusknives
@matusknives Год назад
I cannot help but ask a naive question - would keeping the motor, but changing the ESC be a possible low-ish (one would also need a receiver and a radio) cost option? I am asking, because I have seen a video where an otherwise stock EazyRC Glacier got a 1080 ESC and it’s crawling abilities improved a lot.
@2fmrc
@2fmrc Год назад
I don’t doubt it at all. The 1080 is great. It’s just pretty huge in the smaller rigs imo. Hopefully Hobbywing is working on a smaller solution 🤘
@matusknives
@matusknives Год назад
@@2fmrc that is a good point about the size.
@seniorxj2931
@seniorxj2931 Год назад
"Hold your tongue right" 🤣
@mjspeedrunrc6220
@mjspeedrunrc6220 Год назад
Amazes me that when they first came out, people were swearing that this thing box stock crawled betterthen their built scx24s 🤙🏾🤣
@2fmrc
@2fmrc Год назад
Nope! Not even as good as a V2 scx24. I never felt like they were that great.
@marckevinnn
@marckevinnn Год назад
i have a question. my mofo rc big block and bearings on the trx4m bronco was installed last night. is it normal for it to roll back on a slight incline? drag brakes doesnt seem to work well...
@2fmrc
@2fmrc Год назад
Hmmm it may not have as strong of a hold with that motor. I haven’t installed the bearings with mine yet so I haven’t tested it. That stinks. Is your esc in crawling mode?
@therealcletusrc
@therealcletusrc Год назад
I still want a max smasher but everywhere I look it’s sold out
@rhuanboillat-uv8hy
@rhuanboillat-uv8hy 3 месяца назад
how fast it is now ?
@DeliberateNRandom
@DeliberateNRandom Год назад
2:18 "TITLE TEXT HERE" 😄
@2fmrc
@2fmrc Год назад
Yeah I’m not sure why it did that. Wasn’t there when I exported it but I wasn’t going to delete the upload for it 😆
@DeliberateNRandom
@DeliberateNRandom Год назад
@@2fmrc WYGD? I'm pretty sure I've done the same. Taking our Costa Rican friend out, I uploaded the night before and it wasn't the full one, then did the full one and it got less views, so I left both. I get it.
@2fmrc
@2fmrc Год назад
@@DeliberateNRandom yeah it’s like a re-upload gets buried in RU-vid’s algorithm lol
@willyjimmy8881
@willyjimmy8881 Год назад
Do you think the lurching is more related to the motor or the ESC?
@2fmrc
@2fmrc Год назад
I’ve tried several motors with the stock esc and haven’t really been a fan of any so I’m thinking the esc isn’t great. A lot of it depends on gearing but I just don’t think I’m gonna get a great slow crawl with much wheel speed on this esc.
@Friskee62
@Friskee62 7 месяцев назад
I am running my orange Bronco pretty much stock except for wheels and tires. The slow crawl in my Bronco is better then the Furitek 1/18 truck. My rig also makes no noise when slow crawling...never whines.
@2fmrc
@2fmrc 7 месяцев назад
Not sure what truck you got but it must be a brand new release or something. The Traxxas slow crawl is terrible in every Trx4m I’ve seen.
@S5UPERCHARGED
@S5UPERCHARGED Год назад
I found the stock traxxas esc to be useless. I run the stock motor with an axial scx10ii 3s esc as I had one spare.
@mikemangiameli561
@mikemangiameli561 Год назад
Wonder how the big block would do with a furitek esc.?
@2fmrc
@2fmrc Год назад
I’d say it would be much better
@mikemangiameli561
@mikemangiameli561 Год назад
@@2fmrc just bought two cayman so maybe I'll give it a try later. Used up my rc budget for this month already lol
@need4drift
@need4drift Год назад
I would say maybe try a tooth smaller and press fitted pinion gear if possible. Bearings would also help. Brushless tho is fantastic and a good choice for the more demanding modelist that can afford it. Thanks for making this videos brother, this is great information on these awesome little trail crawlers. Do you think is possible to fit a fcx24 2speed transmission in the trx4m?.. 🤔 That would be a great upgrade in my opinion to have a low speed for smooth crawling and a high speed just to have that extra speed when needed. 🤗
@2fmrc
@2fmrc Год назад
I wish Traxxas had put a 2 speed in these. They could’ve really made something amazing. The Trx4m is good but it could’ve been much more imo
@ToGrimmToWin
@ToGrimmToWin Год назад
@@2fmrc trx4m should have had portals and 2 speed
@ToGrimmToWin
@ToGrimmToWin Год назад
After watching all the trx4m videos I'm glad I went with a fcx24.
@lummox1212
@lummox1212 Год назад
I’m still not sold on the small crawlers. I tried the scx24 and didn’t really like it. It was pretty stock though.
@2fmrc
@2fmrc Год назад
Yeah you definitely need to try either a very upgraded scx or pick up an FCX24 or Furitek Cayman. The scx24 is falling behind now when it comes to stock vs stock. They are garbage stock lol. My buddy had an Scx24 and didn’t get into the small crawlers at all. He ran my cayman and immediately started wanting one. We preordered the new cayman pro for him last wk. His outlook on them completely changed after running a good one. Either way I really appreciate you being here and for the comment!
@willyjimmy8881
@willyjimmy8881 Год назад
I'd go with fcx24 if you want cheap out of the box crawler that can be upgraded if you want. If you want a more premium or custom truck go for the Cayman and skip the middle man. Customizing an scx24 will cost just as much or more. The trx4m is like getting an amazon alexa device, it's just there to milk you dry trying to upgrade it with overpriced hopup parts.
@Rs817t
@Rs817t Год назад
@@willyjimmy8881 well said
@ModellbautechnikSalzkammergut
I also have one
@QuinnsRC
@QuinnsRC Год назад
Throw an FCX24 ESC in there! What happened with the FMS speed motor in it?
@2fmrc
@2fmrc Год назад
It was horrible with the speed motor. Just trying to keep the stock esc for those who don’t wanna swap everything.
@knightmare4385
@knightmare4385 Год назад
@@2fmrc I have been wondering about the FCX24 ESC/RX combo swap into the TRX4m with the Big Block or even leaving stock 180 motor. Just hated to tear down my only FCX24 to try it. LOL I found the combo with TX for less than 50 bucks I think. Which makes it cheaper than the Furitek system, but nowhere close in performance, but maybe more affordable option. Any thoughts or ideas. I'm loving the MG41 transmitter of the FMS and hate the size of the Traxxas controller. Great content and love the info you put out.
@TheLilDwarf
@TheLilDwarf Год назад
i would have put a motor with more turn instead of less, stock gears but slightly slower motor, the slower the motor, the torquier it is usually
@bladeaddison3189
@bladeaddison3189 Год назад
The Big block isn’t waterproof though is it?
@2fmrc
@2fmrc Год назад
Any brushed motor is fine with water. That used to be the way to break in the brushes back in the day. Drop the motor in a glass of water and let it run for 20-30 mins.
@AgeOrmstad
@AgeOrmstad Год назад
Cool canal you have 2 fm rc😎👍. I dont like this trx4m. Axial scx24 💪
@Gmcworrior1
@Gmcworrior1 Год назад
Title text here
@2fmrc
@2fmrc Год назад
Lol yeah it wasn’t there when I started the export process. Once it uploaded I wasn’t redoing it 😆 Making sure people are paying attention 🤘
@Rs817t
@Rs817t Год назад
Basically don’t get the trx4m
@2fmrc
@2fmrc Год назад
Lol it definitely could’ve been better. I don’t hate it but I don’t love it either
@Rs817t
@Rs817t Год назад
@@2fmrc I had to sell mine I hated it lol
@rotten2209
@rotten2209 Год назад
Typical Traxxas electronics. That alone turned me away from this. Sure they'll last forever but they aren't that great at anything else.
@2fmrc
@2fmrc Год назад
Lol most of their electronics in their bashers last about 3 days 😆
Далее
Hobbyplus T-Hunter! Better than Traxxas? $120 BEAST!
30:44
FCX24 with MofoRC Big Block motor upgrade?
15:55
Просмотров 6 тыс.
#kikakim
00:31
Просмотров 10 млн
ROCKET that LITERALLY BURNS WATER as FUEL
19:00
Просмотров 1,7 млн
CHEAPER than a TRX4… The FMS FCX10
10:36
Просмотров 6 тыс.
Furitek + Injora + 3Flow9RC = Ultimate TRX4M!
19:09
Просмотров 12 тыс.
Traxxas TRX4M why you need these upgrades!
22:27
Просмотров 10 тыс.
Top 5 Upgrades For The Traxxas TRX4M
9:10
Просмотров 4,8 тыс.