Big Diesel Engine 23000HP Piston Removal & Power Plant Tour (ENG SUBS) 

I immediately recognized those green lifting tools for cylinder head and piston. I used to work for the company that manufactures them and other parts for Wärtsilä. Nice video!

3:45 I need these sound-proofing doors for my studio 🤣

Nice video! I'm one of the guys who makes parts for these Wartsila engines. Bearing pieces, extension pieces, sleeves for cylinder head etc. ❤

I was once visiting a warehouse repairing something. I looked for a seat so that I could complete some paperwork and spotted a large metal drum. After standing back up I then realised that the metal drum was in fact a huge piston - much like the one in this video. It was in a warehouse in Blyth, Northumberland. I remember the piston was much more worn that what we see in this video. I have no idea what became of that old piston.

Stock 2JZ with 100,000 horsepower: that’s cute.

3:47 ps4

Beautiful clean facility. You should be proud of it!

1:11 i thought the scale is much more bigger but then the guy grabbed it and I was like what XD

3:47 Welcome to my house!

Where do i buy this big bore kit for my honda crf450?

I would love to have a used piston or couple old valves from something like this.

Wow! Nice video, this is the first time am seeing a piston as large as this

Ο Μητσάρας είναι μεγάλο Εργαλείο! Μπραβο στην ομαδα!

One of the con rods and pistons that are out of spec would be a awesome mailbox.

Μπράβο ρε πατριώτη ωραία περιήγηση.. Εύγε..

"Here we have a small cylinder head" :proceeds to show a huge cylinder head.

Awsome video that piston would make a great coffee table

Thats so cool and intresting. What a hunk of engineering brilliance.

This entire video is mesmerizing. Such an incomprehensible feat of engineering 🤩

It's interesting to see how different parts scale when engine size dramatically increases

when you work in a place like this at night, your mind tends to run wild

The people look like small goblins compared to the engine.

Pov you are a squirrel in a dodge viper

Hey man thanks for showing us that factory! its quite impressive! and a big thanks you for the english subtitle to much appreciated :D

Amazing infrastructure

Have worked for another type of engine which is W18V50SG. Special tool for pulling out piston is different from V46.

Nice over view watrsila engine most power full..... 18v46 💪💪💪💪💪💪💪

Will it fit in my 2001 honda civic?

Μπράβο μάστορα!

Great: two people working and three people making a movie. Fire the projectmanager!

It's a nice engin wartsila 46 v 20. i have worked on this angins more than 7 year

I need these studs for my RB haha

i was worked as work engineer in power plant at texmaco plant AP

Piston size is like an oil drum so big

Great motor 👌👍✌️😉🇨🇿

Imagine being in that crank case when it starts

Nice Video! How did they determine that this cylinder was due for an inspection? Does this engine always run a power balance test through the control room and alerts operators when one or more cylinders are contributing more/less power than the others...or did some one just hear noises? I have been to Zakinthos, Agios Sostis, and Thessoloniki and want to see it all again! All the best from the USA :)

Wow big piston

Is this the big bore Kit for 50cc Honda bikes?

Wartsila engine is the best of the world

that turbo sounds scary

Kalimera. What factory this sir? I thought it for a ship.

Are the engines for generating power alongside the boilers (so some kind of combined power plant) or are the engines backup for when the boilers aren't working or if electricity demand is suddenly very high? Also, how is the steam produced - is it gas or coal fired? Must be really interesting working with all this incredible machinery.

ωραιος ρε φιλε, μπραβο

I’d hate to have to do a hot re-torque on those head studs lol

Better factory than mine in satisfactory

The metal shavings are bigger than a Civic motor.

3000 hours is not very long to be tearing that engine apart for inspection youd think it would go much longer between service intervals

Agora o Apzao nao vai cuspir a biela através do bloco

That piston is as big as a water heater

Fiz muito esse trabalho aqui no Brasil nos motores wartsila 18v

How many liters of oil for this machine?

An den kanw λάθος αυτό είναι το καινούργιο εργοστάσιο παραγωγής ρεύματος της Ρόδου??!!

Was there a problem after only 3000 hours? Seems that's not much time for an engine that probably normally runs 24/7.

how many rpm? 7

I WAS THE LEAD DESIGNER ON THESE

Adding a stroker kit I see

Wow the first video which isn't clickbait

It might sound funny to say, but I found the size of the components, huge as they were, a bit underwhelming in comparison to the size of the overall engine. With the entire engine being such a massive size, I was actually expecting the piston and rod to be far larger than it appeared here, I thought it might have been at least a metre in diameter, similar to their large 14 cylinder engines.

How does one of these diesel powerplants work? i thought the engines turned alternators to make electricity but then theres boilers and steam? how does it work?

Toyota supra: that’s cute

Good video i subscribed

It’s a 50 or a 86cc?

Will this fit in my honda?

With how much is the cylinder head torqued down?

Oh look 4 head bolts per cylinder

I think jiffy lube might charge a little more for the oil change on this thing

I love heavy duties

അടിപൊളി 👍

Indonesia heavy equipment🙏

How does the Piston extraction work? A large Magnet?

That looks like the exact fit for miata

Good

I clicked over here from a video about a guy revitalizing a v8 in an old Chevy C10. 'Big block'. Lulz

will fit to my honda?

now imagine this engine running away...

Where can i get this for my puch maxi?

Arp headstuds torqued to 500 yard pounds

Sir how many gasket maker you have been used

Nice

Πού βρίσκεται το εργοστάσιο;

What power plant is that ?

Where is the Power Plant ?

No no police its 50cc

is that off a 2018 yamaha yz125?

why was piston broken?

Are y'all changing rod bearings or just inspecting the Piston wrist pins?

Ρε κάπου ειμε κ εγώ μέσα.....ζωγραφιζης έτσι???

It's not a wartsila, it's a big bore kit for a 50cc moped..

How much coolant does this thing use?

lol how much gas must thats thing use in an our

Wow

My bicycle,'s pistons are bigger than this showed in this video 🤷‍♂️ i' m sorry but i won.

What is the mpg of this

That one it is a 4 stroke engine right?

Suport

Só um desse pra pegar aquela RD do capeta!

62zz lòng sắt đó anh em

How much oil

Total number of pistons and total cc?