Bigger Battery for the Jetson Bolt Pro 

In this video, I show you how to upgrade your Jetson Bolt Pro battery to get an increase of 67% in capacity! parts needed battery: ebay.us/wiPAYq adapter: amzn.to/3VVJ9zq easy way extension: amzn.to/3eXiphA professional way SM JST Connectors: amzn.to/3MVVYpk DC Connector: amzn.to/3z92mEi

The cut when you started talking about the honeymoon analogy was gold lol.

Had mine 4 mos and battery won’t charge. They are sending me a whole new bike so I figured I’ll just replace the battery like you show here. Thanks!!!

Like your hosting personality. Keep the great content coming. AWESOME 👍🏼

Your videos are awesome. Very informational and easy to follow.

Fantastic, thank you! I just did this upgrade, but I like your tip to reuse the factory charging port. Wish I'd seen your video first! I also liked how you weighed both batteries to show the weight difference.

Yes, I like your presentation style also. I'm in the process of this upgrade. The links were extremely helpful in that aspect. Not a cheap upgrade but it will hopefully allow for those more ambitious rides without worry. The extra battery could be used for a second Bolt with a 12 Amp, Dual battery setup. Hmm ... Thank you, a lot! 🙂

Been using CAOMM batteries in all my ebikes for four years now. they're good batteries

I chuckled when I see these at my local Costco. Now you have me thinking about getting one and modding it. Totally your fault.

A great video. These bikes are so moddable lol 🤣 new subscriber here 🙏🏻

I love the channel so much

I’ve been watching all you’re videos and really enjoy your work! I’m researching a upgrade for my new Dyu d3f (idk if it’s exactly the same or not) but I want to upgrade from the stock 36v 10ah to a 48v 12ah and what I think I learned is this; the engine is not a problem it can handle it, and the stock controller should be able to handle it as long as it says eg 36-48v or something similar.. is it something else I need to research before I move on and do the upgrade? Thanks!

I love your style. Subscribed easily. What are you doing with the old original battery?

Thank you for good vibes but i have question how many mails will gv with this new battery 🔋 and did the speed will different

What was the before and after range?

Thanks! Is there some trick to getting the battery brackets back on? I used the first method the easy method so the battery is backwards. And I pointed the cables up. The brackets didn't fit back on even though I noted their position when I removed them. I just screwed the cover back on because everything seemed tight. Just took my first chili ride of 2023 today, looking forward to many more with 10 amps of confidence. 🙂

Great vid, would you be willing to sell that cable you made? I want my bike to look stock but to be secretly upgraded

Nice!!

Hi there mate finely a proper vid i have a windgoo and wonted 2 no if dyu and jetson bolt are all the same aprat from jetson bolt has 14inch wheels and 250 watt moter mine has 12 inch 350 watt moter standead no body got link for ppl who could make me a battry same size of original but higher voltage and ah i wona upgrade and go big or no point but wona keep it all clean and tidy tho like yours mate

Hi Yuthrtgher, great resource and video. Thanks for it! I try the link for the 36 10ah, but does not seem to ve available anywhere. Can i get the 48v 10 ah instead? I think the size kf battery is the same right?

Haha...i like your style man 🤣🤟 niiiice and Thiiiiigt 😎

So this battery will ultimately. Get me more range from the original one or will it still discharge at the same rate cause of the increased V? I just need to get like 5 more miles out of this thing

I have a swagtron envy electric bike that battery was only a 4.4 amp I got a 14 amp battery for it it is 36 volts too but I was having problems with it I think it’s to much for the motor controller at first it was doing good then it was keeping cutting off malfunction and the motor controller was warm or hot but I was only getting about 11 or so miles I should be getting more then that

Where can I get those wires for the charger repairs and connectors?

Very well done video. I wonder if the same could be done to the Lectric Lite e bike, nice bike but sorely lacking in the battery dept.

I'm going to put one of them cao mm Batterys in mine except I'm going to fit a 48v 14ah.

How many miles can you get on that new battery

How much extra range you get?

More info on where u buy it from battery

I like your presentation can you send me more specific information about the size or battery model?

Id like to use the factory battery in parallel with the new one. Maybe mount the factory battery on a rear rack and connect it with a wye cord?

And for the jetson haze?

Working on adding a second battery with diode parallel connection to supplement the stock battery.

Is there any reason you can't cut off both connectors and splice the battery to the charging port?

We really need to figure out a new 3D printed battery and component housing upgrade.

Any ideas why my jetson wont xharge at all

Howmany miles and how long the battery last until it 0% dead

Where did you buy the battery and the connector?

Ordino hack working in the haze ?

I want that I don’t need to cut any wire to change the battery..plug n play.

Would it be better to mount the new battery on a rear rack? That way you can bring it somewhere to charge where bikes aren't allowed.

Where can I get this battery in NY?

can you show how to install the AlveyTech throttle replacement

I weigh 230 pounds and my pro only went about 8 miles total before dying with 2 uphill roads *bridges* and I want to try this upgrade but what will I expect for the new mileage? 6 more miles or so? And with it being 48V will the bike go faster? Or just end up discharging at the same rate as the old one anyway?

Do you have a discord or email where I can contact with more questions about this? I don’t want to flood the comments lol

Can you use the stock jetson charger on any aftermarket 36v battery?

Do I have to do any modification to the original case of the bike to get this new battery to fit?

Since it is the same 36V can you run both in parallel?

Used A123 LifePO4 cells, 14s for 46 nominal and 49 full. Only need a 10a BMS because 46 x 10 is obviously way more than a 250w motor. The results? Less CAPACITY. Half of the stock, which is a big cost, but...since I built the whole battery, there is less than 3% voltage drop on full power and I unlocked the speed with Arduino code. Why am I posting this? Because on stock when I unlocked, it still sucked going up hills. Also max speed was 18 mph. I am not sure if it has to do with the thicker gauge wiring i used for the whole battery and the lack of voltage drop, but the thing goes 22 mph on the upgraded LifePO4 battery and the 250w motor doesn't struggle as much. For some reason on stock batteries there is a voltage drop of up to 10% which obviously isn't that good on full power. that and I can recharge the sucker thousands of times. Good for a 3 mile work/3 mile home commute. Also these cells can be charged quickly so I have it wired up to quick charge and still will get >1000 cycles at 95% DoD. 8 amps in = 20 minute from dead to full charge.

Would you sell the cord the connect your battery to the original charging port so I do not have to make one?

Does it use the same charger if you do the easy way or do you have to buy a new charger

Upgraded only the Battery to 48v - about 21 mph based on 180lbs weight. Is there anything else I can upgrade to increase at least up to 30mph. Thanks YouThruther. Old man but wants a little speed. 😂

lets say the battery dies mid trip home. how difficult is it to pedal with just leg power. thanks

does the original charger work for this battery?

What is battery sag?

Know anybody in California who could do the upgrade for me? I live in Chico, California; and can drive to Torrance, if you would do the work. I will pay what you require. Anyway, let me know ... Going longer distances is more important than going faster. Battery upgrade over new controller?

У меня на kugoo v1 установлена батарея LiFePo4 20s 3p 32700. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lVYsIbIMsQw.html

Uu

I really wish people would STOP tampering with the batteries on E vehicles in a dangerous attempt to increase speed or range. Each product is SPECIFICALLY DESIGNED AND INTENDED by the manufacturer to use a specific battery type and number for safety purposes related to the specific vehicle in question and according to the owners manual the FCC actually has the authority to take away the end user's legal right to operate the vehicle if they make unauthorized modifications of any kind. If range and speed are a problem then perhaps you should consider driving a regular internal cumbustion engine powered vehicle or a bicycle instead? These electric powered vehicles (razor scooters,electric go karts etc.) were NEVER intended to be used as an alternative to a pedal powered bicycle as an alternate means of transportation....they were designed to be relatively affordable riding toys for older kids and younger light weight adults.