Тёмный

Bilge hatch construction and installation, Sea Dreamer Project Ep. 79. 

Six Points Wood Works
Подписаться 41 тыс.
Просмотров 24 тыс.
50% 1

A little bit of everything in this episode, epoxy work, rabbet work and forward sole hatch construction. Exciting times coming up, as at long last, with the hatches located, i can now properly lay out the forward cabin interior!
This is this is the story of a complete boat owning and boat building novice and his family, constructing a 41’ full displacement trawler yacht in the backyard of their upstate New York home. While I consider myself a fairly advanced amateur woodworker and DIY guy, I’ve never owned a boat before and certainly have never built one either.
The naval architect, George Buehler, designed this boat, from his Diesel Duck line, with the home builder in mind. This design has been licensed for professional builders in China and Turkey, but George’s goal was always to make the large, blue water cruising boat within the reach of the average person.
His commitment to a design that was attainable for the average handy person, resulted in his first book, Buehlers Backyard Boat Building, detailing the process. His designs often include building materials and fasteners available at the big box home improvement stores.
George believed that a robust, comfortable and safe cruising boat could be built with less than ideal, traditional materials. While he acknowledge that less than ideal materials may limit the vessels longevity and resale value, his design would get people safely out on the water while the other guy remained landlocked saving for a design he would never be able to afford to build.
Many traditionalist scoff at his mostly hard chined designs and deviation from traditional methods and materials. However his maverick approach has made the dream of crossing oceans in a home built boat a reality for many around the world. No matter what the “experts” say, his designs have been proven over and over with literally hundreds of examples cruising the worlds oceans today.
Our goal is to be next!
Sea Dreamer Project Merchandise Through Teespring:
www.teespring....
Totalboat Products: The official supplier of the Sea Dreamer Project
www.jamestownd...
Discount code at checkout: henryred1
Atlas work gear and apparel. Every purchase through this link helps support our project:
www.atlas46.co...
Custom saw milling and welding at DAM Enterprises:
/ damsawmilling
Beta Marine- Marine Diesel Engines:
www.betamarinenc.com
Production equipment:
Camera: Canon EOS M50: amzn.to/320MUqF
Microphone: RØDE Pro: amzn.to/2HneCpD
Editing Software: Finalcut Pro
Other Amazon affiliate links:
Porter cable 690 D-handle router: amzn.to/366CM2n

Опубликовано:

 

27 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 47   
@peterplouf2836
@peterplouf2836 Год назад
Of all the steps I have learned in boat building watching RU-vid videos, the Rabbet line cut for the fitting the Garbard plank still seems to reside more on the side of art than science.
@milt7348
@milt7348 Год назад
Stay safe and we'll see you next time.
@raymondmcmacon8283
@raymondmcmacon8283 Год назад
Good show
@kenmurphy2051
@kenmurphy2051 Год назад
Attention to detail that's what I like a out your project.
@neilfairless4589
@neilfairless4589 Год назад
Great to have you back regular again Scott.
@markpalmer5311
@markpalmer5311 Год назад
Looking “boaty”! Excellent to see and, per usual, great attention to craftsmanship.
@Tomhohenadel
@Tomhohenadel Год назад
Always great to see a new post. Looking good. Hard to make progress during the winter. Thanks
@reddogleader1968
@reddogleader1968 Год назад
Yahoo! Another episode from Six Points Wood Works!😊
@restorationsofmusicsystems8609
You are amazing. You are very talented. I've been following you since your first video. Learning and living with you is very exciting. I look forward to each of your videos. Thank you very much for all the information you share. With love and greetings from Istanbul, my retired police chief.
@daleyurk4369
@daleyurk4369 Год назад
Love it when you post a video! Nice work.
@mattevans-koch9353
@mattevans-koch9353 Год назад
More progress. Good to see you are getting some weather you can work in. Thank you for the update on your progress. Take care and have a good weekend.
@wileycoyotesr8623
@wileycoyotesr8623 Год назад
Stay warm and safe.
@rodmoyes2235
@rodmoyes2235 Год назад
Every thing is coming together nicely. Looking forward to further progress.
@DIYNauticalDream
@DIYNauticalDream Год назад
I can't get enough of your videos. Your wood working skills are amazing. You project is really looking great. Each video is so full of useful information. You are living the dream.
@morychok11
@morychok11 Год назад
Good promotion! A very beautiful hatch. It will give a lot of air. It's worth working on his defense. Can be epoxy
@geoffworthington9425
@geoffworthington9425 Год назад
Great progress look forward to each new video
@Oxnate
@Oxnate Год назад
Seeing that propeller on your shed made me think of a video I just saw on Sharrow Propellers. More expensive up front, but save so much money on fuel. So if you haven't bought your propeller yet, you might want to look into them.
@davidanderson5565
@davidanderson5565 Год назад
Nice job ur doing great makwning this boat
@jeffkatzer
@jeffkatzer Год назад
Well done Sgt.
@SoBoring136
@SoBoring136 Год назад
Congratulations mate,
@josecarlosalvareztobar9579
@josecarlosalvareztobar9579 Год назад
Great videos. Very instructive and very interesting. I like the way you explain things and the passion for what you do.
@lazyplumber1616
@lazyplumber1616 Год назад
Nice work Scott. Wish you had time to produce these videos more regularly. Try adding some felt pads to the bottom mating surface of the hatches.
@anderw2
@anderw2 Год назад
I would suggest permanently numbering the hatches somehow, so you know which one goes where.
@jphoffman1
@jphoffman1 Год назад
You know what might be nice, is if you would film a nice slow pan of the salute to service board so we could pause and read the patches. Just a thought.
@georgefrench1907
@georgefrench1907 Год назад
👍
@gunnarfernqvist4896
@gunnarfernqvist4896 Год назад
I must say I was really scared when you leaned over or stretched your arm across the moving table saw.
@johnmaliskey7951
@johnmaliskey7951 Месяц назад
Your video's just started back but dated as of a year ago. This is Aug. 2024 and have you posted anything since??? Have been watching Yaba; Tally Ho ; Arabella ; Ran and others. kinda forgot about you ........................... enjoy
@redknighton5405
@redknighton5405 Год назад
Just got caught up on the videos and I have a couple of comments. 1. The frames are bolted to the floors and then bolted to the keel with only one bolt per frame/floor , is that strong enough? It seems like a lot of weight. The hull wants to float up and the keel wants to pull everything down. 2. How are you going to add ballast to the bottom of the keel /bilge with all the tanks and soles installed. 3. Why didn’t you extend the small carlines all the way to the planks to add structure?
@daveevans7438
@daveevans7438 Год назад
Always happy to see a Six Points Woodworking video pop up. Great job on the hatches Scott. Interior layout will be great to see. Have you made a decision on the motor set up?
@youngsandwich967
@youngsandwich967 Год назад
yes its always a great time when you post. keep up the great work we love to see it!
@brickcity9mm896
@brickcity9mm896 Год назад
Just what the doctor ordered 👋👁👃👁👍 🔥
@glennjaggard7065
@glennjaggard7065 Год назад
Those rachet stops won't last long at sea when salt air will rust them quick
@garyjohnston1817
@garyjohnston1817 Год назад
Are there any episodes past 80
@opcn18
@opcn18 Год назад
@5:55 was there a reason to have the sawblade extended all the way out and with no guard or riving knife on it like that?
@gjordan456
@gjordan456 Год назад
Hey Scott, been following your progress pretty much since the beginning and was wondering if you ever needed any help? Been working with wooden boats for many years and I’m a retired commercial cabinetmaker, im a little east of Buffalo so i don’t think I’m to far from your location
@jamesmiller9299
@jamesmiller9299 2 месяца назад
What happened? Areyoustill working ontheboat?
@davidantill6949
@davidantill6949 2 месяца назад
Have you given up releasing videos?
@asicerik
@asicerik Год назад
Nice work Scott. I'll bet those feel nice underfoot
@VLOGS-skyun
@VLOGS-skyun Год назад
come on. I hope the day of launching this ship will come sooner.🎉
@TK-11538
@TK-11538 Год назад
you're the only person I've seen who wears gloves while using a table saw, which makes me think that is not a safe practice
@larry78cj7
@larry78cj7 Год назад
Looks good!
@fonhollohan2908
@fonhollohan2908 Год назад
wow that was quick for posting another video that's awesome Scott Everything coming together, really looks great.
@VLOGS-skyun
@VLOGS-skyun Год назад
It's been a few years watching this boat build. Looks like this year the boat will be ready to launch
@michaelc.3812
@michaelc.3812 Год назад
Nice to see a new video Scott, wishing they were more frequent. Be well.
@graham6229
@graham6229 Год назад
Press on my friend. You are going very well.
@svlamancha9877
@svlamancha9877 Год назад
Looking good. 👍
Далее
БЕЛКА СЬЕЛА КОТЕНКА?#cat
00:13
Просмотров 2 млн
Трудности СГОРЕВШЕЙ BMW M4!
49:41
Просмотров 789 тыс.
Confronting My Wood Supplier
12:14
Просмотров 342 тыс.