Bilstein 5100 Suspension Install (W/Sound)

Подписаться 4 тыс.

Просмотров 31 тыс.

50% 1

VIDEO WITH SOUND!
Apologies as there was some copyright claim on the last video and RU-vid did not allow me to make any changes.
LINKS:
Suspension: amzn.to/3FkpsuM
Ubolts/ 1" Block: amzn.to/3TeZa2u
Driver Shim: shop-coachbuil...
2017 Toyota Tundra
4x4 Crew Max
Bilstein 5100 Front and Rear Shocks with 1" Spacer in the back
BFG KM3 33x12.5x18
Measure lift 2.45
We have been getting a lot of request for more install videos. Today we installed 5100 seriesBilstein adjustable shocks on this beautiful Tundra. Many people start with this upgrade as it is very cost effective and gives the truck a slight lift and better ride. For this install a couple things to keep in mind, you will need a spacer/block for the rear to level the back with the front. The front we set to the highest setting to give the truck the most lift and in the back we added a 1" block to level the truck out. depending on the weight you are carrying in the back you might have to go to a 2" block or better yet upgrade leaf pack. In this scenario this truck only required a 1" block to perfectly level it out . Thanks again for your support and feel free to ask away with any questions, as we try to make these videos a simple and self explanatory as possible.

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 103

@HarvLiz Год назад

Awesome video! I like that you guys leave in the difficult parts and not cut them out. This is what we needed.

@overlandtundras Год назад

It’s all part of the adventure

@DoneWaiting 2 месяца назад

If you live in the rust belt treat those 3 studs on the top of the shock several times before removing them. The sand and salt sit on that cap and then the nut stick and it is very challenging to cut those off. I just did a Tundra and the back stud on both sides had to be cut.

@overlandtundras Месяц назад

Great advice!

@diegorico9321 Год назад

It says a lot about a RU-vid channel that throughly comments back on questions pertaining to the video. Curiosity brought me here about whether I want to lift my truck, if I do I know a reliable channel now. Thank you, good quality is hard to find these days.

@overlandtundras Год назад

Thanks bro we have fun with the trucks and love to share the knowledge !

@Glocker23 Год назад

Great video. Thank you for uploading the one with all the sound. Much appreciated. Great work again!!!

@overlandtundras Год назад

No problem thanks for the compliments

@x101st 7 месяцев назад

What an awesome video! Y'all make it look too easy! I'm ready to tackle my 2011 Rock Warrior! Thanks!

@overlandtundras 7 месяцев назад

You got it bro! Take your time and step by step

@mikehughes8023 10 месяцев назад

Thorough all the way through!👍🏿

@overlandtundras 10 месяцев назад

Awesome hopefully it helped!

@savagestacker Год назад

Great looking stance . Looking for a Good suspension for my 2020 tundra 1794 . These level it out nicely without having to add to much just a couple U-bolts a small block and shim and your off . I was hoping he would of measured the lean on the driver side after the shim installed but it looks pretty level on video. That lean drives my crazy so I was very interested in the result (or maybe I missed it) either way . Great vid . Definitely going to reference this vid with my suspicion upgrade. Subbed thanks 👍🏻

@overlandtundras Год назад

Thanks man. The lean isn’t to much of a deal but the shim levels it out nicely. Only you will ever notice the lean but it’s suppose to help with alignment however you think they would of came even from factory.

@greekmaster1001 9 месяцев назад

Man I wish there was a shop here in NYC or NJ that know what the he'll they doing when it comes to installing these or doing any other mods Can't trust any of them

@overlandtundras 9 месяцев назад

Check the local groups there might be a small Toyota specialist!

@greekmaster1001 9 месяцев назад

@@overlandtundras which groups? Where do I find them?

@overlandtundras 9 месяцев назад

look on Facebook and see if there is any local groups near your area @@greekmaster1001

@budhardin1945 Месяц назад

Whats your opinion on rough country 3.5 lift/ level with their shocks/strut (not a spacer kit), upper control arms? It would be 99 percent on the road. Im getting older and the ride quality is relevant. Ive had bilstein on ford before and very happy, but trying to obtain 3+ inches and run 35s. Thank you for all yall do.

@overlandtundras 29 дней назад

The quality of ride is ultimately going to come from the strut so it’s important to get a quality one. I personally have never been in that set up before so can’t say it’s bad or good. We personally run king Coilovers, dobinson, fox, icon, and bilstiens for quality and ride

@joemooskie4444 Год назад

Great video. I installed 5100 for my f250 6.2 . What is the hex hole on top of front shocks for . I was turning that instead of the nut. Then I noticed a guy just turning the nut on YT . Did I screw up my shock. Instructions weren't that great. Look forward to your answer. Thanks

@overlandtundras Год назад

Hey man thanks for the compliment. Hit me up on Instagram overlandtundras and send me a picture of what you are talking about.

@lifeofmarco8656 3 месяца назад

Is this the right way to get a leveling done to my tundra? People say to just put spacers but i dont know how i feel about that

@overlandtundras 3 месяца назад

Spacer is a rougher ride I always recommend getting a real suspension

@jerrymleko 8 месяцев назад

Awesome!! When can I drop my truck off to have it done??

@overlandtundras 8 месяцев назад

Send me a email at overlandtundras. @gmail.com and I can get you connected.

@roadeomagic Год назад

Great vid guys! I've been contemplating about putting 5100's front and rear to give me a 3x2 lift. What was the front and rear measurements? It was never mentioned.

@overlandtundras Год назад

Overall with shim and rear 1” block. you are looking at 2.75-3” lift

@footrake5719 Месяц назад

If you do not install the 1" block in the rear, will the truck ride lower in the rear? Have 2010 tundra and this is the first Bilstein 5100 install I've seen that uses the top Clip on the front but also installs a 1" block in the rear. Just looking to have mine level with a slightly oversize tire. Great video!

@overlandtundras Месяц назад

So depending on the age of your truck it may sit lower and that’s why we recommend the block for a perfect level. Some older trucks have well worn springs and leafs that sit slightly lower.

@williamscales8974 3 дня назад

Might be a dumb question but, do you put any type of lock tight on the bolts before reassembly?

@donfoley9732 9 месяцев назад

ok this ones better.great video.tourgue specs?and do you think this could be done without a lift?

@overlandtundras 9 месяцев назад

Yes many have done it without lift. Just takes a little long setting up jacks and stands

@qouavang3646 2 месяца назад

How thick is that shim that you used to fix the toyota lean?

@overlandtundras 2 месяца назад

We use the .5”

@htown9628 13 дней назад

Did you have to use wheel spacers w those tires on stock rims?

@overlandtundras 7 дней назад

No spacers

@paulm0209 6 месяцев назад

The amount of ads in this video are very annoying. I would opt out for ads DURING your videos. Otherwise, good video.

@overlandtundras 6 месяцев назад

Thanks for the feedback! If you have RU-vid premium you don’t get ads

@Boston4099 Год назад

Hi this is a great video. I have a 2007 tundra that needs new struts and tires. I was gonna level at same time. Can you recommend a coil over and level brand for me. I’m doing myself so the coil over will work better for me.

@overlandtundras Год назад

If you check the description of the video you will find the links to these struts and you will be able to use your factory coil!

@SP-ls8lw Год назад

Bilstein also makes the 6112, a complete kit with coils and hardware.

@jonadrums Год назад

I bought the shocks but didnt come with the things you slide in for the ride adjustement? 😮

@overlandtundras Год назад

Oh dang reach back out to whine ever you got them from and tell them they are missing pieces

@TheeFlyingK Год назад

Great video. Due to its length, however, I think there's some information I need to be clarified. If I didn't measure prior to the removal of the suspension, should I add that 0.5" spacer on the driver's side? Also, are the rear blocks necessary for a correct level with the max setting here? I have air bags on the rear of my truck as well, though that is somewhat irrelevant. Appreciate all the information y'all have shared, though. I was a little surprised when the shocks didn't come with even a one page manual about part order which is what brought me here.

@overlandtundras Год назад

So we found that after measuring and reading forums the tundra does have the driver lean and if you really want it perfect then the shim is recommended. You won’t notice it without to be honest. In the rear if you will need the shim if you are wanting the maximum height and go the max setting in the front.

@TheeFlyingK Год назад

@@overlandtundras I appreciate you taking the time to respond. So what I’m hearing is add the DS shim as it’s a very common attribute of the Tundras and add 1” blocks to the rear if using the 5100s on top setting. My tundra had 1.75” front shock spacers on it from the previous owner but I never knew it to be out of level so that’s why I was a bit shocked when I saw needing blocks for the rear. The measurements from each seemed like it should be a direct replacement😅…though another 1” in the rear isn’t a problem either. Just trying to get the facts straight. What about control arms? Worth changing UCAs to tubular for more alignment adjustment?

@overlandtundras Год назад

@@TheeFlyingK you are welcome and it also depends on conditions of springs and leafs. Some people have an older truck that they tow a lot and very worn leafs where they need more than a block in the rear I personally have done icon leaf stage 3 for all the weight in the bed But if all the components are good then with those shocks, springs, and spacer you will be golden As far as uca you aren’t going high enough to need to upgrade. However it will not hurt.

@TheeFlyingK Год назад

@@overlandtundras I did replace the front springs as the lower portions were starting to show their age. I'll keep the icon leafs in mind for the future, but I'd probably just block for now. I do pull a 4k lbs boat frequently, but that's about the extent of it. I just saw some UCAs for a similar price to OEM so that had me wondering. I'm going to go out on a limb and say that aftermarket UCAs won't be as reliable as OEM. Am I fair to say that or am I wrong?

@overlandtundras Год назад

@@TheeFlyingK depends which ones you get. If you get a good reputable one they will be significantly beefier and better.

@jamessuess3915 Год назад

Great video!

@overlandtundras Год назад

Thanks bro!

@nengvang5035 Год назад

Hi for the link you posted for suspension it stating for 07-14 but your truck is a 17 would it fit because I have a 16 and really interest in doing the level.

@overlandtundras Год назад

Yes it will work for yours.

@mreconomist1402 Год назад

This may not be an easy question to answer but I need to get my Fox 2.0 rebuilt. Do y’all think the eibach spring will work with the 5100? I dont have the oem setup anymore

@overlandtundras Год назад

As long as all the dimensions are the same then there shouldn’t be an issue.

@365AdventureCo. Год назад

I’m doing my install tomorrow but my 5100’s came with OME 2612 springs on clip 1 , they claim 2.5” but everyone is saying it’s like 4” of lift have you installed those or should I just put the oem coils on

@overlandtundras Год назад

Not familiar with that coils so I would stick to the factory one.

@deanmeier5428 7 месяцев назад

Hey great video. What size tires did put on?

@overlandtundras 7 месяцев назад

35” tires

@carlosvilla4166 15 дней назад

And no rubbing issues? I got 295/70 (roughly 34’s) 18’s with a 3 in. Block in the fronts and I still rub my plastics

@matthewsmall5386 Год назад

whats the ride quality like compared to factory suspension ?

@overlandtundras Год назад

On the road a slight improvement and offroad significant improvement!

@tjmark67 3 месяца назад

What tipe should I get for the front of a 07 tundra i would like HD

@overlandtundras 3 месяца назад

I’d recommend something like this. www.toyteclifts.com/07tunbilk-bilstein-5100-series-front-and-rear-shocks-for-07-tundra.html

@joeyrobledo Год назад

Nice!!

@overlandtundras Год назад

Thank you! Cheers!

@joeb1125 3 месяца назад

Where is your shop at? I have a 18 Tundra that I would like to get that lift

@overlandtundras 3 месяца назад

Located in Jacksonville florida!

@joeb1125 3 месяца назад

@@overlandtundras I live in Jacksonville but where are you located?

@jamesfuentes5688 Год назад

What size torx bit did you use to help tighten the top nut?

@overlandtundras Год назад

I’ll have to get back to you in that one can’t think of the size at the top of my head.

@tamapaogofie-buyten3056 Год назад

What’s the average cost for parts and installation these days?

@overlandtundras Год назад

Depending on the shop for 5100 your looking at around $1k for parts and install on average.

@tamapaogofie-buyten3056 Год назад

Cheers for the quick response bro 🤙🏽

@roadeomagic Год назад

Great vid guys! What was the end result measurement? Was it 25 front, 24 rear?

@bradychampagne2317 Год назад

Can i fit 35s with this setup keeping the stock ucas?

@overlandtundras Год назад

Yes!! Depending offset you will need a cab mount chop

@devinsibley768 11 месяцев назад

What size tires are those on it at the end?

@overlandtundras 11 месяцев назад

35” tires

@senormomero8748 14 дней назад

What are the 2big washers for?

@overlandtundras 7 дней назад

Those go on top of the front strut to get a higher lift in the front

@senormomero8748 7 дней назад

@@overlandtundras on 13:46 I don’t think they lift that much being that they look skinny

@overlandtundras 7 дней назад

@@senormomero8748 these specific ones give you .5” of lift in the front.

@erikalvarado1432 11 месяцев назад

I want to get the 5100s for my tundra, would I have to buy 2in longer coils? Or can I get away with using stock?

@overlandtundras 11 месяцев назад

Your coil will be perfectly fine.

@erikalvarado1432 11 месяцев назад

@@overlandtundras sweet! Thanks for such a quick response!

@overlandtundras 11 месяцев назад

@@erikalvarado1432 he sir!

@erikalvarado1432 11 месяцев назад

@@overlandtundras what would the finished height be if I added a 2.5” leveling lift kit with highest shock setting? Front and back?

@overlandtundras 11 месяцев назад

@@erikalvarado1432 all trucks are a little different but if you do the front shims it could be 2.5”-2.75”

@givingtreeoflife Год назад

Yo my go to answer guy, so I installed the Bilstein 5100 with a 1" block in the rear, question is, do I need a front dif drop kit to drop the front differential, will it harm my cv axle without it? I drove the truck for 3.5months and it worn off the driver's side needle bearing, only wear I see on the axle is the race worn from the needle bearing, and so I replaced it with a ECGS bearing, ran smooth now. But again, will I still need to drif drop? Have you drop yours?

@overlandtundras Год назад

Did you do the highest setting on the front? Some people do it but unless you are going 3inches or higher it’s not necessary. I personally didn’t do it till I went higher now I’m at about 4” in lift with the king coilovers and def needed

@givingtreeoflife Год назад

@@overlandtundras yeah, I did the highest setting just like the one in your video, everything just like it. I believe its 2.5" up front

@overlandtundras Год назад

@@givingtreeoflife yea I wouldn’t stress about it. Let the suspension settle and then take it to get alignment and see if there is any geometry issues

@givingtreeoflife Год назад

@@overlandtundras Everything's good, alignment done. Thanks for the help, very appreciated.

@overlandtundras Год назад

@@givingtreeoflife awesome and great to hear. Enjoy your beautiful truck!!!