Thank you so much for this clear step by step video! I bought mine 3 years ago and put it off thinking it would be too complicated to install... But your video made it easy peasy. Here's to cleaner booties!
THANK YOU!! Simple, straightforward video with no fluff but just the essential steps and some helpful tips. I made so many mistakes (using wrench, teflon tape counterclockwise, etc.), on my first attempt, prior to your video.
Thank you forthese great instructions!. This 74 year old female installed from start to finish alone, thanks to your video.Your instructions are perfectly clear and detailed; the video/pictures add to that.
May GOD bless and protect you in the mighty name of JESUS! May GOD and JESUS break every chain the enemy has formed against you and liberate you! May GOD and JESUS fill you with the HOLY SPIRIT, GODliness, strength, love to get through any challenge or struggle! GOD IS GOOD! JESUS IS GOOD! GOD is love in times of hate, GOD is strength in times of weakness, GOD is light in times of darkness, GOD is harmony in times of chaos, and GOD is all you need and more! If you need more love/strength/anything GOD is there! GOD LOVES YOU JESUS LOVES YOU! GOD BLESS YOU IN THE MIGHTY NAME OF JESUS!
Thank you for the video. I was dreading installing this, but it took me no time at all with your step by step video. I found it easier to apply the teflon tape on the splitter T prior to putting it on. I didn't have a lot of room. Easy peasy!
Thank you so much for this awesome tutorial! I am a woman and just installed this without any issues thanks to this video. I already love it. Appreciate you!
Thank you for saying hand tight. I kept tightening it with a wrench and broke the ballcock piece inside. Had to buy a new one and then followed your instructions for the bidet and it’s working great. I did tighten a smidge with a wrench on the taped parts like suggested in the comments.
Very thorough video. I love that you go step by step with clear and precise instructions. I have used this for about 4 months now. It's is an awesome sanitary tool. I forsee most American households using these in the near future.
Excellent video! I followed the instructions step by step, and read everyone's comments and suggestions, and it seems like I have a successful installation... without flooding my downstairs neighbor's apartment! (Will post an update if necessary.)
A very helpful video, thanks for taking the time to make it. One thing, you kept emphasizing "hand tight" on the connections. I agree, except for the connectors that you have to wrap with plumbers tape. Sometimes the tape can make it seem as you have screwed it all the way down, but it's not. I recommend using an adjustable wrench and with the slightest pressure turn the nut the same way you were finger tightening. See if the nut moves. If it does you can go back to hand tightening wait for the resistance and try the wrench again. I'm talking 1 or 2lbs of torque. If the nut doesn't move you're good to go.
Glad you enjoyed. Yes, you make a great point. It is difficult to explain how tight to make the fittings, but also did not want people over-tightening. Thank you for pointing out and providing a helpful method! 👍🏻
One way to reduce the pressure of the water as it's coming out of the nozzle is too flush the toilet first. Then as the toilet tank is filling up with water, go ahead and use the bidet. The water pressure coming out of the bidet will be greatly reduced to a stream instead of a spray.
I don't have this exact bidet (bought it for someone else though). I have a similar issue with mine with the water pressure being so high. You can try turning down the main water valve to try to get a little less pressure. Worked for me, the water stream wasn't as shocking after that lol
May GOD bless and protect you in the mighty name of JESUS! May GOD and JESUS break every chain the enemy has formed against you and liberate you! May GOD and JESUS fill you with the HOLY SPIRIT, GODliness, strength, love to get through any challenge or struggle! GOD IS GOOD! JESUS IS GOOD! GOD is love in times of hate, GOD is strength in times of weakness, GOD is light in times of darkness, GOD is harmony in times of chaos, and GOD is all you need and more! If you need more love/strength/anything GOD is there! GOD LOVES YOU JESUS LOVES YOU! GOD BLESS YOU IN THE MIGHTY NAME OF JESUS!
I tried installing this today. I have a water line coming up from the floor and a plastic nut. It leaked at the T adapter a little and the air when I tried the bidet. So then I wrench tightened the and nuts and it made it worse. Took it apart, back together twice, leaks. Gave up and put it back to they way it was - and now have leak at the toilet. Have to get a plumber to fix. Expensive gadget.
Sounds like you may have over tightened it and possibly cracked something. Only need to gently tighten it. Hopefully a cheap replacement part to fix your leak
Same happened the me. I stripped the plastic bolt you screw the T-Valve on. Had to buy a whole new toilet fill valve *just* for that, and installing that, and then the bidet again, afterwards. Wish me luck...
Mmm I'm not sure about that 'hand tight only' idea on a pressurised water connector, think I'd have nipped it up with the adjustable wrench to be sure 😊
Free to tighten as you like. Just a fair warning because the plastic pieces tend to have hairline fractures and leak due to over tightening. Just a fair warning. Enjoy!
Excellent video!!! You did a perfect job. I just installed a refurbished one just like it by Azmkoo, but it has two switches. I have to go back and add the teflon tape. The rubber pads did not fit so I left them out. I just wish I could adjust where it sprays since both nozzles seem to point to the same place.
May GOD bless and protect you in the mighty name of JESUS! May GOD and JESUS break every chain the enemy has formed against you and liberate you! May GOD and JESUS fill you with the HOLY SPIRIT, GODliness, strength, love to get through any challenge or struggle! GOD IS GOOD! JESUS IS GOOD! GOD is love in times of hate, GOD is strength in times of weakness, GOD is light in times of darkness, GOD is harmony in times of chaos, and GOD is all you need and more! If you need more love/strength/anything GOD is there! GOD LOVES YOU JESUS LOVES YOU! GOD BLESS YOU IN THE MIGHTY NAME OF JESUS!
Mine came with spacers and a vague separate instruction sheet. It does feel odd when I am sitting on the toilet, like I'm at an angle. Do I need the spacers?
My video is based on the 'Slim Edge' model and does not affect the angle of the seat. Could be one of two things: 1- do you have the Slim Edge model or a different one? 2- your seat design may be impacting the seat angle
@@TofuShop Yes, it's the Slim Edge (smile.amazon.com/gp/product/B07CGVBZGL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1). It could also be because I replaced our previous plastic seat with a wood seat and I need to get used to it.
May GOD bless and protect you in the mighty name of JESUS! May GOD and JESUS break every chain the enemy has formed against you and liberate you! May GOD and JESUS fill you with the HOLY SPIRIT, GODliness, strength, love to get through any challenge or struggle! GOD IS GOOD! JESUS IS GOOD! GOD is love in times of hate, GOD is strength in times of weakness, GOD is light in times of darkness, GOD is harmony in times of chaos, and GOD is all you need and more! If you need more love/strength/anything GOD is there! GOD LOVES YOU JESUS LOVES YOU! GOD BLESS YOU IN THE MIGHTY NAME OF JESUS!
I have a few suggestions: 1- To confirm, if you goto the 3:00 mark in my video, did you install the rubber washer in the correct direction? 2- On the old hose that you are connecting to the new 'T' adapter, clean out the threads on the inside 3- Use teflon tape on the bottom of the 'T' adapter where it is leaking for a tighter seal If you are still leaking after, the connector on your old hose may be damaged and needs to be replaced, unfortunately. Hope this helps!
Great video! One question; all my connections seem correct, no leaks. But even though bidet works, when it is off, toilet tank does not refill. It was working fine before installing bidet.
Thanks! Hm, that sounds odd. The bidet works so that means the valve from the wall is turned back on, correct? Inside your toilet tank is a lever that moves up/down when a floating piece raises/lowers based on the height of the water. Can you check if it is maybe stuck in the 'up' (off fill) position?
Teflon tape is always recommended when working with plumbing to prevent leaks in the future. The joints are plastic and will contract/expand over time, so even if it doesnt leak now, it may leak in the future depending on the humidify level in your home. I'd add the teflon tape now while the threads are still new and easy to spin
So I've got it all hooked up correctly. But for some reason when it is hooked up the connection to the water valve itself will leak enough to notice and doesn't seem to leak when the line is just connected to the toilet tank itself. I'm unsure what to actually do about it. The valve connection is similar to your setup with the exception being my spout is pointed down as your example the spout is pointed up. I attempted to take the line off by hand but it was pretty tight, But I'm not sure if I should take it off at all. I was thinking if I did that, maybe I could put teflon tape on the spout and then place the line back on to see if that might be the reason. Any advice would be super helpful. 🤷♂
I would definitely add teflon tape. Sounds like there is a leak through the threads. (Direction of the valve doesn't matter if sealed properly). If teflon tape doesnt fix the leak, you may have a faulty hardware and would request exchanging it. Hope that fixes your issue, good luck!
May GOD bless and protect you in the mighty name of JESUS! May GOD and JESUS break every chain the enemy has formed against you and liberate you! May GOD and JESUS fill you with the HOLY SPIRIT, GODliness, strength, love to get through any challenge or struggle! GOD IS GOOD! JESUS IS GOOD! GOD is love in times of hate, GOD is strength in times of weakness, GOD is light in times of darkness, GOD is harmony in times of chaos, and GOD is all you need and more! If you need more love/strength/anything GOD is there! GOD LOVES YOU JESUS LOVES YOU! GOD BLESS YOU IN THE MIGHTY NAME OF JESUS!
My splitter connector nut is free and moving. I think I broke it and now I see gap between nut and pipe and water is leaking from there. Where do I get splitter connector? Lowes HomeDepot??
May GOD bless and protect you in the mighty name of JESUS! May GOD and JESUS break every chain the enemy has formed against you and liberate you! May GOD and JESUS fill you with the HOLY SPIRIT, GODliness, strength, love to get through any challenge or struggle! GOD IS GOOD! JESUS IS GOOD! GOD is love in times of hate, GOD is strength in times of weakness, GOD is light in times of darkness, GOD is harmony in times of chaos, and GOD is all you need and more! If you need more love/strength/anything GOD is there! GOD LOVES YOU JESUS LOVES YOU! GOD BLESS YOU IN THE MIGHTY NAME OF JESUS!
May GOD bless and protect you in the mighty name of JESUS! May GOD and JESUS break every chain the enemy has formed against you and liberate you! May GOD and JESUS fill you with the HOLY SPIRIT, GODliness, strength, love to get through any challenge or struggle! GOD IS GOOD! JESUS IS GOOD! GOD is love in times of hate, GOD is strength in times of weakness, GOD is light in times of darkness, GOD is harmony in times of chaos, and GOD is all you need and more! If you need more love/strength/anything GOD is there! GOD LOVES YOU JESUS LOVES YOU! GOD BLESS YOU IN THE MIGHTY NAME OF JESUS!
Thanks for your informative video. I have an installation problem with the splitter. The connection to my toilet is hidden in behind and is difficult to get to without moving the toilet. I presumed the splitter would be installed down at the connection where it comes out of the wall. Do you know if there any type of splitter that will attach to a standard waterline coming out at the wall?
If you are able to connect the splitter directly to the wall valve, you could install it that way as well if you have enough room. It would look like: Wall valve -> splitter -> toilet line Alternatively, Amazon sells short length pvc and braided stainless lines. Search for 'braided toilet line' and a bunch of options will come up. Alternative setup that may work for you would be: Wall valve -> new toilet line -> splitter Both options should work the same way in filling the tank and feeding the bidet
Check to make sure the two mounting services aligned flat before u try to tighten it. Check this first, because this is probably your issue. The area is tight, so it is a tricky Is the mount on the toilet damaged at all before removing?
I followed your instructions and I still have water spraying everywhere. Now, when I put the regular hose back on it sprays everywhere as well. Did i break something!? Is it too tight! I looked at the pipe coming from the toilet and there wasn’t any cracks on it that i could see. Does having it slightly crooked cause the leak!? Please help.
There's a few things you could check: 1- did you overtighten and crack something? might be hairline fracture somewhere. 2- yes, make sure the hose is lined up flat before you screw it on. if u are only able to screw it barely 1/2 a turn, it isn't on straight. realign it and hold it tight so that it is flush before you start tightening. 3- did you try using teflon tape to prevent leaking? 4- where is the leak coming from?
@@christinaspears2835 is the black rubber piece facing the correct direction (i show in the video which way it should be pointing). Did you make sure you threaded and tightened the joint properly (not diagonal or misaligned)? Did you try using teflon tape to prevent leaking from the threads?
The bidet works independently of your toilet. Your issue sounds like it is related to something inside the tank. Things to check: 1- Did you remove the lid to see if the tank is actually full? 2- Is the flapper seal at the bottom of your tank loose and letting water leak through? 3- Is the float piece in the tank raising high enough to shut off the fill tube?
The top part of the toilet connector leaks :( I wrapped it in teflon but it still leaks, i think its because the top part of my toilet is made out of plastic? how do I replace that?
Was it leaking before you removed the hose? You could try using teflon tape for a tighter seal as well. If still leaking, maybe you have a faulty part. Id consider contacting customer service for a replacement. Good luck!
This model is all mechanical and doesnt use a battery. Sounds like the valve that is controlled by the switch may be faulty. Id reach out to customer service
May GOD bless and protect you in the mighty name of JESUS! May GOD and JESUS break every chain the enemy has formed against you and liberate you! May GOD and JESUS fill you with the HOLY SPIRIT, GODliness, strength, love to get through any challenge or struggle! GOD IS GOOD! JESUS IS GOOD! GOD is love in times of hate, GOD is strength in times of weakness, GOD is light in times of darkness, GOD is harmony in times of chaos, and GOD is all you need and more! If you need more love/strength/anything GOD is there! GOD LOVES YOU JESUS LOVES YOU! GOD BLESS YOU IN THE MIGHTY NAME OF JESUS!
Not really. There are two nozzle sprayers with slightly different angles. If you turn the knob left it activates one, turn right activates the other in a prefixed angle.
It does not feel cold to me or my wife. Even in the winter, still feels okay to us. If this is a concern for you, there are other models that connects to a hot water line for a warm spray
I've had this one installed for about 3 months it has developed an internal leak inside this knob you turn to spray and leaks on the floor. Disappointing quality
Oof, sorry to hear. Ive had mine installed for over a year and we use it multiple times a day. Zero issues still. You should reach out to their custom support to get a replacement
I’m having a small leak issue at the splitter right under the nut- when you install the splitter does the it move a bit left to right or does it it to be tight enough to stop moving completely? The perpendicular piece
It should not move at all. You need to unscrew, make sure both pieces are flush and touching before you tighten. Sounds like you may have force-tightened it and cross-threaded the piece, or you have a faulty piece. You can also try using teflon tape to seal the leak
@@aftabmian4152 im not sure, you would have to lookat each piece. Try unscrewing, make sure both pieces are tight and flat together, then try retightening. It may fix the cross thread
I hate these toilet bumpers. Still doesn't raise the seat enough enough. It has to flex when you sit on it. Shouldve got the slim model but didn't notice it at the time.
May GOD bless and protect you in the mighty name of JESUS! May GOD and JESUS break every chain the enemy has formed against you and liberate you! May GOD and JESUS fill you with the HOLY SPIRIT, GODliness, strength, love to get through any challenge or struggle! GOD IS GOOD! JESUS IS GOOD! GOD is love in times of hate, GOD is strength in times of weakness, GOD is light in times of darkness, GOD is harmony in times of chaos, and GOD is all you need and more! If you need more love/strength/anything GOD is there! GOD LOVES YOU JESUS LOVES YOU! GOD BLESS YOU IN THE MIGHTY NAME OF JESUS!
