hello , very helpful video even in 2024 , i am modifying it for my final year project , but i am having issues with the time showing for the time in time out ,, it is not the same with the actual time
The best videos I've ever seen on this subject It really helped me a lot. I'm really looking up for version 3 of this project with more automation and intelligence. Also, I would love to see you making it with a raspberry pi it gonna be more interesting for us. Thank you very much You are the best.
Definitely want the RFID and fingerprint. We are having problems with middle school kids leaving to go to the bathroom and then not coming back until right before class. We want to be able to have them log out, log in when they walk into the bathroom, log in again when they leave the bathroom, and then log back into the classroom. As we have 2500 students, I think RFID is a better choice but the fingerprint would be great for students that forget or lose their ID cards. Can you help me by making one of these? Is there a way for the RFID to sense the student without the student touching anything? They log in and out by just entering the room or bathroom. Thank you for this. This is great!
i think you might want to check out uhf rfid, you can then setup an reader above of beside the door and record in/out without hw interaction, you just need to fiddle with the position and type of tags search Dogbone rfid tags, ( this is the same tech used in marathons, etc. ) If you need help , feel free to get in touch.
Thank you for this project. It's very good and useful. But I don't understand the Manage Device part. What is this system used for? Can anyone explain it to me? Sorry I'm Vietnamese
Sir i am currently making this as my final year project. But I'm facing problems with the OLED display. It doesn't turn on when it is connected according to the video
Great project, it works well for me, I just have a problem when I need to add fingerprints to other devices it doesn't save them, could you please help me?
Hello sir i have a problem when i upload the system on the server it does not log out a user it only login everytime i place a finger how can we solve that
I already done all the connection and it works but im facing a problem which is when i want to add a fingerprint through the webpage can not add it,plus the screen oled dosn't display the scaning part as on your video and it show a fingerprint with × or √ May i know how can i solve thes problem please?Thank you sir
Hello. I followed everything but my issue is there is no device shown under Devices but on serial monitor it says fingerprint sensor found. Please help
Hey this is the one of the amazing project I've seen. Would you please help me out in doing this project with Nodemcu ESP8266 board ??? What should I do while working with Nodemcu ESP8266 board?
heyy when compiling im getting an error that says exit status 1 error compiling for board ESP32 dev module ive tried everything like deleting arduino5 folder and reinstalling arduino
Hi mate, I really love this project and I would like to make it. Could you please make a video or explain on the comment if : 1) We would like to use an Ethernet or WiFi module. 2) We can choose if use the Fingerprinter or the RFID? To login or logout? Example: Login with the Fingerprinter and logout with the RFID card? It will be even more interesting 🤔 Thanks in advance I never see this project explained and done like you so far. THE BEST!!!
Glad you like it. 1-You can use either Ethernet or WiFi. 2-I have two videos about RFID and Fingerprint and two versions of the two, you should try to combine both as you want.
i have this error message can you help me what is Rong ??? Arduino: 1.8.9 (Windows 10), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Disabled, 4M (no SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 256000" Build options changed, rebuilding all In file included from C:\Users\don't talk\Desktop\Biometric-attendance-system-V1.0-master odeMCU_Fingerprint odeMCU_Fingerprint.ino:20:0: C:\Users\don't talk\Documents\Arduino\libraries\Adafruit-GFX-Library-master/Adafruit_GFX.h:12:32: fatal error: Adafruit_I2CDevice.h: No such file or directory #include ^ compilation terminated. exit status 1 Error compiling for board NodeMCU 1.0 (ESP-12E Module). This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.
Hello there! Amazing tutorial, my question is, is it posible to save the fingeprint for future validations on a database outside the biometric fingerprint reader?
@@ElectronicsTechHaIs Any recomendations on where to start? I have been trying to do so since a few months ago, im having a lot of trouble with biometrics and their SDK on Ubuntu
Hello my friend I have a MacBook with a M1 processor. I face a problem when I use the fingerprint to record attendance. It does not download data in UserLogs and the table still empty in database , but when I add students, it adds students, deletes them, and logs in. I tried to change the Xampp version a lot , and use MaMp server but do not solve the proplem . What do you think is the reason?
Reset time on code to match your local time. Apparently the way the request is being constructed, the time it expects is different. Look at your php error logs for more info.
Hi Great project btw, I want to email you because Im facing some issues here that didn't show up for you in the video and I'm pretty sure I followed the instructions step by step.
How to use 2.8" tft display with this project..? This display is so tiny. Isn’t it more beautiful with a bigger display? If you can do this then plz make a video with a big tft display.. But if you don't make the video then please help to to do this and give the source code plzzz...❤️
we are doing same project but we want to save the fingerprint data on database and then when user mark attendance the fingerprint upload to data base and fingerprint matching process take place on data base any suggestions or links?
Congratulations, great project, this project works correctly for me, I only have some problems with the attendance, at a certain time they no longer show me the attendance, how can I solve that error, I took the time zone from my country Mexico
Hello! I have done this project from last tutorial but i needed to make it with raspberry pi. I tried it, but it was so difficult communicating the nodemcu with pi. Please if you make a video about it, it will help a lot. Thanks a lot!
Hi, It's not that hard to setup the Raspberry IP as a web server, you can install on the PI either LAMP or LEMP then the PI will just replace the local server.
Hello! I am getting following things in the serial monitor, Adafruit finger detect test Found fingerprint sensor! Sensor contains 0 templates Waiting for valid finger... Check Mode Check to Delete ID And also getting, "You can't add more than one ID each time" in the manage user side. please help me!
Thank you .I need to know if it's possible to the admin to store is fingerprint and log to the website by adding his email and put is finger in the fingerprint sensor and if it's finger was stored he can has access to the website page
Good video and explanation, but i can't seem to be able to log into the website like you did on the (00:28) duration of the video. Would very much like it if you could inform me on how to do that.
when i add fingerprint, oled display shows fingerprint with cross and lock, it doesn't show scanning as you did and dev status is always free and not added. Serial monitor shows "checkMode and check to delete id " and doesn't even show "check to add id". how can i solve this error? I have also emailed sir.
error: control reaches end of non-void function [-Werror=return-type] 297 | display.display(); this error is coming while complie we don't know what to do ?
Hello sir can you tell us how can we change the admin mail and password in the website login page...Thankyouuuu for the video 😊 and hope you will reply soon
Hi sir, may i know is there possible to make a combination of RFID and Fingerprint to this project? Means double verification in order to check in and check out, and the rest of the function is totally the same with this video, any modification of code and how is the circuit diagram. Do reply me ASAP TQ sirrrr
@@ElectronicsTechHaIs I already done all the connection and it works but im facing a problem which is when i want to add a fingerprint through the webpage can not add it, plus the screen oled dosn't display the scaning part as on your video and it show a fingerprint with × or √ May i know how can i solve thes problem please?Thank you sir
hey man coming with another question. I keep getting a lock on the fingerprint showing on the oled display. I tried downgrading to a different version of the board and i have triple checked the wiring but it still shows up. can you help?
J'utilise un ESP8266 pour votre version v2 mais je n'arrive pas à récupérer les empreintes dans la plateforme quand je veut attribuer l'empreinte à un utilisateur.
Are you able to access the website from an external device? For example from your mobile by typing your computer IP in the browser, try that and let me know what you will get.
@@ElectronicsTechHaIs Oui j'y arrive. Mais je suis allé au niveau de "Config" sur Apache et "Apach httpd" et j'ai modifié l'adresse ip se trouvant a se niveau et j'y ai mis mon adresse. Je ne sais donc pas si c'est à cause de cela.
Thanks for this video! but i have a problem i don't know the cause. my OLED screen shows the fingerprint with a padlock on it and I can't add fingerprints how to do please
Its Great! Sir kindly I want to create a single device with both Finger Prints and RFID, my friends and I following your tutorials.. Can you suggest how to combine both codes to get a single device?
Glad to hear that, It's better to use ESP32, but you have to modify the website with the database quite a bit, since each type uses a different technique.
sir my attendance is not being marked, its registering student finger print id but not marking attendance what could be the possible mistake we are doing please help me
i was wondering if it is possible to enroll from one fingerprint device and then migrate it to other fingerprint device, like i have 3 different device on each door different place i enrolled one device and i have access to all those three doors
Sorry for the late reply, I've mentioned that in the video, you can't achieve that using my method, theres a different way to do that but I haven't tested yet. You should export the fingerprints templates from the module then import them into the new module.
Hi! We are using this project or our group project. We are having some problems in the time in/ time out of the website, it doesn't display the time in the user logs. A respond can SUPER help. Thank you!
I'm interested in this project and I have tried it, but why is "Log Filtering/Export to Excel" not working. Can you help me But Btw this project so Amazing
Thank's for share this object. It's very helpful for me. I want to use two sensor on a esp8266. 1 for into, 1 for outo. Can you help me? Thank's alot...
Great project friend. I have a problem when I pull the code from the esp32: error: no matching function for the call to 'SimpleTimer::setInterval(long int, void (&)())' timer.setInterval(25000L, checkMode); Could you help me how to solve it please?
Hi nice project I am using the rfid v2 and I have the following question if a shift is from 6pm to 2am how can I deal with multiple time shifts because you set 00:00:00 as reference for the logout
wow i love this project, very interesting. I have gotten up to the level of enrolling with fingerprints, but the website is unable to collect fingerprints,how do i solve that please?
Thank you for this project , it's very amazing But I got one problem , the SimpleTimer is not working for. Even that I have his library. The problem is '' na matching function for call to 'SimpleTimer::setInterval(long int, void(&)())'' Please help me.
Fascinating project and a great source of learning. Thank you for your effort in creating this (and all the other projects). I would really like to see more projects from you. I thoroughly enjoyed watching all your other video. I did notice one thing in this project. The reset-pass.php file is missing from the project. Is there perhaps any chance that you could add it to your repo ?
Glad you enjoy it. Thanks for your time. That's right, To reset the password the website needs 3 more files and I haven't published them yet, If you would like to have them I can send them to you via E-mail.
@@ElectronicsTechHaIs i really like your project, i would like to try this project to. Would also send me the file rest password pls? Btw i subscribe to your channel.
3 года назад
Everything is fine, only the Userslog side is not showing anything!