Bissell carpet cleaner shampooer repair Vacuums R Us Arvada Colorado 

Was just about to buy another one when I spotted your vid. Ripped it apart. Heater was blocked, just like you said. Cleaned it out and flushed the system. Works great. Many thanks.

So first of all thanks for the video and pointers. I have almost the same machine, mine was also only spraying from wand, not the machine. I actually started at the spray heads thinking I'd save some time. I was wrong. They were fine, my issue was with the heater being blocked and the filter that spins to show water flow to the spray nozzles. We had used this machine a few months ago at a cabin where the water supply was contaminated with fine sand. This is what blocked it up. A big thing to note for my machine was it still wasn't spraying after cleaning everything including the pump. I had pretty much given up, however I thought I'd get it put back together completely and try it. Once I got it back together it worked perfectly. Still don't know why, other than the soap dispenser wasn't in, so maybe wasn't creating suction for the pump. Hope this helps anyone who runs into the same issue.

Dude! You're like me when I repair things! I get a jest of how things go, should go when putting them back together again. Glad, even pros go thru same small setbacks...like forgetting to attach power back when trying the device! Glad you posted video as it was! Makes it authentic! Sometimes you discover things as you go and it all works out!

Thank you! I had the problem of spray working on the wand but not on the main lower unit. After watching this video I took the unit apart. Found the heater seriously clogged. Cleaned the heater and found the unit still did not work. Traced the hoses and cleared 2 more clogs at intersections where hoses came together in fittings. I would have thrown the shampooer away if I hadn't found your video. I intend to take your advice and NEVER use the heater again!

Thanks so much man! That heater was a mystery to me before, but you demystified! Not scared of it anymore! Great tips u gave, like not to loss the little orange gaskets. They fall off and you didn't see them and put the device back together, guess what a leak. thanks for all the TIME you put into this video!

THANKYOU! This was the first video I found dealing with my issue (water coming from wand, not lower unit). I disassembled following your instructions.... found the heater completely clogged up. Cleaned it out....works like a charm now!! Loved the video, a little humor goes a long way....well done!

Thank you from Ohio! Worked like a charm !

Always had problems replacing the cover on mine until I discovered that if you put something (think paperback size) under the rear of the cleaner (to lift the wheels clear of workbench surface) it all goes together really easily.

Fixed my bissell proheat because of this video. I'm mechanically inclined so just followed step by step. Sprays again thanks!!

I performed bypass surgery on the heater unit. I tossed out the heater, taped up wire ends and wire-tied them away. The downtown hose was just long enough to reach the value. Next I cleaned sprayer carefully with a needle. I also cleaned out spray hoses with q-tip. I pushed the q-tip through the hose with bicycle spoke. Results: It works great. I just shampooed the carpet in my apartment. I got the Bissel 25A3 from the alley behind my apartment. Someone threw it out. I had fun fixing it. ...not so much fun using it.

Great tutorial, very informative and keeps your attention. I've had mine to pieces numerous times without success. I hadn't expected the problem to come from within the heater itself so back out come the screw drivers.

Very helpful guidance. Replaced my heater and flushed the lines. Problem gone.

Thanks for posting this,....but,... The holes in the hose happened when you were running the machine with the beater brush sitting on the hose! Oops!

Hope everything still going good for you all the way to Denver saying hello from Iowa

Thanxx so much for the video mine i was able to fix my carpet scrubber it wasnt spraying and now it is. I had to clean out my heater and blast out all the air lines and make sure everything was clean before it would work again. And as I live in Canton Ohio so there is no way I would be able to take it to you guys so thanxx again

Hello, thanks for this video. I tried fixing my vacuum but looks like it has different parts. I cant find the heater part, that rectangle plate. I have bisell deepclean proheat 2x professional pet and it is not spraying enough water. When I turned it on, it would spray well then after a few sprays its will be so little but the suction works well.

thanks for your help ,

Thanks heaps took machine apart .took the spray jets off they were blocked to the max. Here is a tip for you soak the hose and tip in hot water it's easy to pull the jets off. My machine works great now

Great, ! Video. Your good,!

Thanks for info, if I'm right tips are clogged

I assume that if people don't do a "rinse only" job on their rugs after doing the soap job, that that would eventually result in the soap gumming up the system. ...just a guess. Our system never seems to get that crystallization. It's maybe 13 or 15 years old or so, and I just had the whole thing apart and didn't see anything more than fur/hair/rug fibers anywhere in it. Besides a little soap stickiness in one area of the head. We are a bit anal about getting the soap out of the rug, so we tend to do a lot of rinsing. And ya, I assume this also keeps the system clean of excess soap due to all the clean water running through it before it gets stored away for an extended time again. All that being said, I think I'll switch to that enzyme cleaner. But after we finish using the Bissell soap we have. :)

Help I have an old model 3412-E Bissell carpet shampooed cleanview preheat it is notspraying from bottom or wand. Gave taken it apart and cleaned pipes and all pieces in thereabouts still not spraying

Very informative and useful video. Quick question: if you turn the heater off on the machine and try to use the sprayer and it still doesn’t work, does that help to diagnose whether it is the heater or sprayer head? Just curious if I can save steps.

I bought my Bissell Pro-Heat 2X Revolution Pet carpet cleaner from your Arvada store years ago, and I'm delighted to discover that you make these excellent videos! We've used the Bissell marketed soap for years, and I'm concerned that it's clogging up the hoses/junctions/pump etc., because flow volume seems reduced of late, and because you point out repeatedly that it will do that. I noticed in comments that you do not yet have a video that addresses low spray volume for this model, but I'm wondering if there's a way to flush out old, crystallized Bissell soap just by running a cleaner (enzyme-based?) through it a couple of times in place of the soap solution? Will switching to the soap that you recommend act to reverse the old soap buildup at all? Also, do the 2-roller revolution models actually "spray"? The water appears to exit the head on mine as a stream, not a spray.

Your videos are really informative. I have a Bissell 9500P carpet cleaner. The attachment hose broke so I bought a new one, however I can’t figure out how to remove the little water line inside the attachment hose going into the bottom of the unit. Any suggestions?

Do you have a video to replace the bottom carpet cleaner realise pedal pls. It’s a old bissell upright green one. Can you help. Pls?

My Bissel Quicksteamer Plus was just used the day before. Came back the next day to finish up the project, and now it is completely dead.. no power. Tried several outlets with no luck. Are there any power resets in this unit? Any ideas?

So i just took my pro heat apart and it has no heater I've finally learned my leason ive worked on this pile of junk more than we ever used it

Hi. I just started watching your video and I do have a dual 2x Bissell cleaner. It looks brand new. I found it curbside at my neighbors. He was moving out snd I think he used it one time to clean his carpets and it stopped working. I can tell he used the Bissell shampoo. The unit had white drips all over it. Anyways. It doesn't spray. The nozzle doesn't spray nor does the front. Did you make a video for this model to repair the no spray problem? If so, can you respond to me with the link?

Got mine all the way apart and noticed a broken belt. 🤦🏼‍♀️

What if the water isn’t spraying from hose/tool

What's the best way to take care of new steamer? I bought a bissell pro

Do you have any videos of the back part off where the bissell release pedal. Something has snapped off the pedal inside. I need to have a video so I can take it apart to get to it. Can you pls help me!

hello? i have a Bissell pro heat 2x pet carpet shampooer and not spraying water on the bottom. Do you have a video that can help me ? Thank you so much

The discussion seems to be about whether viewers should see a good, clear closeup of the heater and its connecting hoses. When blockage isn't found in the heater element, and that hose is then disconnected-people trying to use smart phones to learn this easy repair would really prefer to see those little details, since they are essential little details. If they grab it with such authority as they see but do not possess, they may yank the hose and screw it up. Then their beady little eyes go spatial and they snarl at themselves, not with themselves. The slower they are, the more they like big pictures, because they really are prone to yanking off anything they get their cloven hooves on, if they aren't warned against it. The thing should fill the screen head-on for a couple of seconds, long enough so the goofs can hit pause on their own phones and blow it up to fix their soulmate, their Bissell.

Just bought new revolutionary pet pro 2 and it runs but doesn't spray at either place,could someone please help???

I have a question that nobody including bissell can answer. why when i turn on my bissell deep clean premier do the rollers spin like normalfor an initial second or two then stop. Everyone says the belts but clearly if both brushes are spinning like normal initially the belts are fine as well as unobstructed by debris which is why i am baffled. I would love to hjear your response. Thank you, Shane

Two suggestions: 1. If your cleaners sprays, NEVER leave detergent in the sprayer again! It will likely clog up in any of many possible places. Remove the detergent and flush the system out with plain water, and then get as much of the water out as you can. 2. If it doesn't spray, why go through all the expense, time and aggravation illustrated by7 this video? Just use a hand sprayer to wet the carpet, then use the carpet cleaner to agitate the carpet and cleaner and remove the dirty water. Even better, if you have a pump sprayer commonly used to spray weed killer and such, use that to spray the detergent. My diagnosis of this unit is two fold: 1) The unit must have been the product of a marketing design team, and they included all kinds of pointless features that you don't need, and which are prone to getting plugged up and causing failure to spray FAR better would have been to keep it simple to avoid problems. 2) The instructions should have emphasized, STRONGLY to flush out the unit with fresh water when done cleaning. It says nothing about that, and thus invites failure. A label directly on the machine directing that it be flushed out with clean water would have been a good idea. I have a two roller machine, and yes, it was a SOB to take apart and clean.

My carpet cleaner will not suck the water back up I have Bissell PRO heat 2x

Bissell revolution pet pro

This video is not really in good quality, couldn't see what you were doing. It was really small and looks like the camera or videoer was tilted

this guy is a butcher. I wouldn't let him fix me a sandwich. I want to rewind and see if the melted hose was caused from his careless work habits and it was touching the heater core

Speaking of gaskets ? This guy sounds like he's one tick away from blowing his ? 🤔

Is this a joke ?

Bissell is such a poorly designed piece of trash machine!

You should change jobs,you obviously hate carpet cleaners😨

Bissell sells 💩 period ‼️

Can you please let me know if it's the same for 7920?As that one has two more things to take off...