Blackmagic ATEM Television Studio HD - Setting Up and using 2 HDMI Video Cameras

Подписаться 3,1 тыс.

Просмотров 117 тыс.

50% 1

John Warkentin from michaels walks you through all the steps required to connect 2 HDMI Video Cameras to a Blackmagic ATEM Television Studio HD and switch video inputs using the ATEM's front panel controls.
John connects the 2 Panasonic Video Cameras (HC-PV100) to the ATEM's HDMI inputs and demonstrates simple 2 camera switching showing both the Multi-View and Program outputs of the ATEM.
The various methods Audio Signals from the Video Cameras are handled are covered. And of course the ATEM has 2 professional line level XLR inputs for Audio from Mixing Desks as well.
For Streaming applications, the SDI Program output from the ATEM can easily be connected to the input of a Blackmagic Web Presenter and you will be Live with very little effort!
For a simple demonstration of the Blackmagic Web Presenter - check out our earlier video:
• Blackmagic Web Present...
All of the equipment demonstrated in this video is available for hire from michaels camera so you can get up and running video switching with very little effort.
Hire the ATEM Television Studio HD:
hire.michaels....
Hire the Web Presenter:
hire.michaels....
Hire the Panasonic HC-PV100 Video Camera:
hire.michaels....
Purchase the ATEM Television Studio HD:
michaels.com.a...
Check out the video where John unboxes the Web Presenter and installs the Teranex Mini Smart Panel:
• Blackmagic Web Present...
Check out the video where John unboxes the Blackmagic ATEM Television Studio Pro HD:
• Blackmagic ATEM Televi...
For a more general introduction to the world of live streaming, we recommend this video.
Become Your Own Broadcaster With Ease
• Become Your Own Broadc...

Кино

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 77

@ProduccionesvideoRuiz 2 года назад

las entradas de video son muy delicadas, tengo este equipo y ya se dañaron las entradas y salidas de video

@johnnyjimenezarriaga5352 2 года назад

ya sabemos que no podemos recomendar el equipo, de ahora en adelante cuando me pregunten en santo domingo, republica dominicana por los productos de blackmagie le dire no lo compren que tienen problemas de carga no tiene protecion y mas no tiene reparacion en santo domingo y estados unidos....LES DIRE NO LO COMPREN TIENEN PROBLEMAS DE VOLTAJES

@tv1394 3 года назад

블랙매직디자인 스위쳐 ATEM Television Studio HD 믹서에서 카메라신호와 마이크 신호 받아서 프리뷰로햐서 자막기에서들어가서 hdmi해서 캡처보드 보냐는대요. 믹서에서 멀티뷰 말고 출력단자가 4개sdi단자있는대 바로 출력하면 자막기에서 자막 입혀서 나가서 캡처보드 / 자마막기에서 자막 입혀서 믹서에 4개 sdi 단자로 출력 가능할까요?

@EYEAFRICATV 6 лет назад

Hi Michaels camera am facing some issues with my Blackmagic ATEM Television Studio HD as the screen i connect to the ATEM MulitVIEW pot is not showing and image but the ATEM LCD screen is showing image from a camera I connect to it.

@timothycyphers4734 4 года назад

Did you figure this out? Having the same issue!

@edenilsoncardoso4480 4 года назад

Were you able to solve the problem? I have the same problem. Can you help me.

@edenilsoncardoso4480 4 года назад

@@timothycyphers4734 Were you able to solve the problem? I have the same problem. Can you help me.

@timothycyphers4734 4 года назад

Edenilson Cardoso YES unfortunately it was a defective Switcher. So I sent it to BM and they wound up sending me a new one. Everything worked fine. You’ll have to email BM.

@mdmomtazsheikh4184 Год назад

The first was connecting the blackmagic design software to the micbook air. Once again installed on another window laptop and connected. Then the first laptop (mickbook air) was disconnected. What to do to connect again.

@nallywoodstudio9397 4 года назад

Hi I connect my two Sony 2500 to black magic but I can only see and hear audio but images is blank please help

@ZonZonSmileStudios 4 года назад

Hi did you manage to resolve this issue ?

@svenhamburg881 6 лет назад

Great Video! Actually i use the BlackMagic Web Presenter for Livestream a Talk. I have a question. Can you say a little bit more about the two XLR-Mic Inputs? On The Web Presenter you only have on XLR Mic Input. Thanks!

@churchlaunch 5 лет назад

Please help! I have a dslr t7i running 1080p29.89 FPS. It seems to not be connecting to the ATEM, even if I change the FPS in both sources, ATEM and camera

@sinanarts 5 лет назад

Hi there, having this can you please tell me WHERE TO RECORD our program output.? Only on cameras..? Or where to record to the final product.? please describe

@cholooo 3 года назад

Can you help me guys. I want go to stream 1080p how can i. And I also want to record 1080p

@rodolfoaguilar9195 4 года назад

Best video out there about this product, thank you

@GENESISTV360 4 года назад

Hello I got on my multiview monitor just says Black not Camera in all the places for the camera. What could be the problem?

@harolyngreen4381 3 года назад

I purchased this switcher with 2 Canon XA11 cameras. I’m not getting any feed on them. They have the same frame rates. Any thoughts?

@aysam3581 4 года назад

simple and straight to the point explanation. thank you

@neil3622 4 года назад

Hello, I have just received my Black Magic HDMI to SDI and running into my Black Magic Web Broadcaster to my iMac thorough OBS. The Picture is barely visible and lines all along the scene as well it is also show the same in the web broadcasters lcd panel. If I just connect from my canon camera to the web broadcaster via HDMI it works perfect. Any ideas on what to do? Thanks in advance.

@mixedbyalex 4 года назад

Is it possible to punch from source to source directly? I host a twice channel the least amount of key presses the better. Thank you

@mendat3 5 лет назад

Hello, I have an Atem Television studio HD Switcher. I am struggle to connect it to my Canon 60d DSLR camera. Please can you help me with it

@stevecooksley 4 года назад

I'm not sure if you're still picking these comments up, but when you said you can run two separate multicams out (one SDI, one HDMI) did you mean they can be configured separately or are they just a cloned output? Also do you think it's worth getting a loom made up for the long runs of cables for SDI or does that limit your camera placements?

@andredejager2497 6 лет назад

Thanks for the video! I'm looking to send my program output to a projector (using SDI-HDMI conversion) and then want to send a different output to another projector (using another SDI-HDMI converter). For the output through an aux, can I select the aux and mix video inputs in the same way as the program out? Or even get a multiview that will show Preview and Aux rather than Preview and Program, but be able to switch between where I'm mixing to?

@godsworkthroughmime80 3 года назад

@calebmugira4421 3 года назад

*point of correction* i have the atem mini pro , Buh i do run hdmi cables as long as 50meters no signal boosting needed

@studiodaz 6 лет назад

we have found out that unless your camera can output a mono signal onto both channels the ATEM television studio HD is no good for audio unless you use a separate mixer. The audio signals are linked stereo on the ATEM which means if you only have one microphone plugged in it will be permantly panned hard left or hard right and there is no way to change this position unless you use the more expensive 4K version of the system.

@kimTabisu 6 лет назад

produce blackmagic atem studio verry good produce

@JustifyJustin 6 лет назад

Can one use this as a replacement to the Web Presenter? I.E is this an upgraded WP? Thanks!

@michklusala9066 5 лет назад

i all i need to know wy black magic dont have a support on line? i have the same type of atem television studio hd but i need to use it like video mixer it must manage all video resssource .so when i connect video by sdi port it dont print it macthing only from hdmi port ;could you assit me to setup pleaze advencing think s

@keonjones1763 8 месяцев назад

Faaaaaantastic video!!! Thank you!!!

@mikepruett1745 4 года назад

how bout some pc input and lower 3rds

@dzfam02 4 года назад

What are the settings for size of screen? 1280 x ?

@Thesyndicate11111 3 года назад

Thanks kindly!

@thatjazzshow 6 лет назад

HI thanks for the info. Got my cams connected. Activity on the audio meters, but no pic on thumbnails, just black. Same cams, same settings when connected to Web Presenter look good, but black on ATEM. Thank you

@ZonZonSmileStudios 4 года назад

Hi can I check if you manage to resolve this issue ?

@how0009867403 4 года назад

very good video Michael!

@zolaradiporo1878 6 лет назад

how do I link the Atem Television Studio HD with the black Magic Video Assist?

@psicologiaobversa 5 лет назад

Excellent Video from Michaels camera... one question: can I mute all the cameras and use an input audio source from a Mixer for example

@Superlongevityinstitute 5 лет назад

can I use three GoPro 7 black cameras with the atem?

@ఎర్రబస్సుగొఱ్ఱెబాబు 5 лет назад

michael... sdi out goes to where?

@josefuenmayor5949 5 лет назад

When I connect my 2 cameras the switch doesn't get the video signals and instead of it only shows me a black screen and gets the audio. I'm trying to record 1080p signals in 29,97fps I REALLY hope you can help me. Thanks

@crecimientodevida1303 5 лет назад

Make sure that you match the resolution of those two camera hope those cameras are the same MAKE and MODEL and then set the same resolution on the ATEM and that should work.

@ZonZonSmileStudios 4 года назад

I thought there is a re sync function for different frame rates ?

@polj8731 5 лет назад

Hey, I have trouble to get Capture to Record on my Blackmagic ATEM. When I hit the capture it say I need to install Blackmagic Design Desktop video

@Designguidetv 6 лет назад

hm how does the 'web presenter' stream? don't you need another computer to actually do the streaming?

@michaelscamera 6 лет назад

You are correct, the Web Presenter's output is a Web Camera feed over USB to a computer. The beauty of this system is any software you like can take a Web Camera feed.

@TheWilliamsong 6 лет назад

Hey, great video, very clear, thanks a lot! Question, do I need a video capture card to input to my pc? does it have a usb3 cable to directly send output to my pc?

@TROLittleville 5 лет назад

Can this unit be used with chromakey, PinP and split picture

@mesimba9336 5 лет назад

THANK YOU MASTER

@europeReport 6 лет назад

Ciao Michael, tu eres un verdadero sabio, bigup.

@franciscosunworld 6 лет назад

Excellent video, informative and very nicely conducted

@Maestrofficial 6 лет назад

I would have loved to see a connection of the Camera and Laptop/pc input. I seem to be having challenges with getting a laptop signal to the mixer. Could you kindly advice on what I could be doing wrong?

@michaelscamera 6 лет назад

The important thing to remember when Switching Cameras and Computers is to have everything on the same standard - in 99% of cases this means 1080p60. If you can't get all sources on the same standard you might need to convert the problem signal to match your main standard. For this job you want to get a Blackmagic Teranex AV into your system. Check out this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ed8BbhWJ6g8.html

@mikepang123 6 лет назад

Is this an area where the Roland V-1HD / V1-SDI has the advantage over this Blackmagic offering at this price point?

@digitalmagicAR 6 лет назад

Thanks. Good video!

@steverobinsonofficial 6 лет назад

How do I live stream to Facebook with Atem television? Should I connect the device directly to the PC ??

@michaelscamera 6 лет назад

The ATEM does the Video Switching, to stream you will just send the output from the ATEM to the Blackmagic Web Presenter. Check out this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TFzFAZLSu_Y.html

@steverobinsonofficial 6 лет назад

michaels camera - video - digital thanks sir !

@austinipowers 6 лет назад

Hi, I'm liking your video, but what if I don't wanna use the web presenter can I just input the signal with declink (or something similar) - and then use other software to stream it? Do you have a video how the ATEM control software works in this kind of situation? The goal that I'm trying to create is a streaming solution for 2 or more cameras that would require only one laptop that would do both the live editing and streaming.

@michaelscamera 6 лет назад

The ATEM control software is completely independent of your method of streaming. As long as you can capture the video output from the ATEM into your computer (or even a stand alone streaming device) and get it to a streaming application you should be good to go. Keep in mind you don't need to do the live switching from the ATEM software as the basic controls are on the front panel of the ATEM. The other software items (like OBS Studio) just run in the background on the computer once you set them up and go live.

@aimanshaari2490 6 лет назад

i still dont understand how the audio connect to atem

@mrcrossovermark1153 5 лет назад

I Wish this was more affordable.

@smallbrandproductions6906 5 лет назад

It IS affordable....

@wheatlandstudios 4 года назад

Thank you for the helpful info!

@Mxolie 6 лет назад

I have 2 monitors that I want to feed a clean picture onto. How do I output on the the TV or big monitor? That's where I get it wrong.

@michaelscamera 6 лет назад

You could use an AUX output from the ATEM along with a SDI to HDMI Micro Converter to drive a standard TV set that has HDMI inputs.

@ఎర్రబస్సుగొఱ్ఱెబాబు 5 лет назад

@@michaelscamera sir, what is use of sdi out put pins

@Ronfred 6 лет назад

How would I record the switched feed onto a hard drive. No live streaming needed.

@michaelscamera 6 лет назад

Michael, you can record the streaming output with any standard application that can record from a web cam. Do keep in mind that this will be at 720p. Otherwise you will need a video capture card with HDMI or SDI inputs. The way we record is with a standalone Blackmagic Hyperdeck. There SSD and SD versions of these Hyperdecks. Very nice products.