Blackmagic ATEM Switchers for Worship | Intro to Multi-Camera Video Production

Подписаться 271 тыс.

Просмотров 225 тыс.

50% 1

Apply to Join Worship Ministry School:
churchfront.me...
Free Worship and Production Toolkit:
churchfront.me...
Shop Our Online Courses:
churchfront.me...
Join us at the Churchfront Live Conference:
churchfront.me...
Beginner Church Sound Course:
churchfront.me...
Follow Churchfront on Instagram or TikTok: @churchfront
Follow on Twitter: @realchurchfront
Gear we use to make videos at Churchfront:
kit.co/churchf...
• • • • •
Disclaimer: This video and description contain affiliate links.
Musicbed SyncID:
MB01VWQ69XRQNSN

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 368

@tooleyoclock 4 года назад

Yeah. I’m going to have a hard time convincing the elder board to approve thousands of dollars for “Blackmagic”.

@jamespollock2500 4 года назад

There is more then 1 version of the equipment. they have a mini about $300, a "Pro" version about $600 and then the version he has in this video.

@n2donnat 4 года назад

Same here!!! They don't understand!

@unwedasilor86 4 года назад

Haha, I hid the box 😁

@OJUtter 4 года назад

Interesting they don't understand yet with the times we are in. We have a 4 camera PTZ system in a small rural church and immediately the value in that was seen because the only difference people have had in their worship is that they aren't in the pews. We started out bring all the cameras into our Wirecast on a Mac via LAN, but the camera feeds would lag at different rates making post editing a challenge and live streaming an even bigger challenge. We got the Television Studio Pro and the change has brought value almost immediately. My post service edit time after has decreased from more than 4 hours to less 1 1/2 hours from beginning of edit to posting it. That opens up 2 1/2 hours to focus and put energy in other areas and project. Plus our service audio and video are in sync always and the switcher opens up the ability to put the video feed on our big screens when the pews are filled again. Plus our live stream computer when from live streaming and recording at 720p with the Mac at 90-99% the whole service to now we are streaming 720p & recording at 1080p and the computer sometimes hits 60% but mostly runs in the 40-50% range. That will pay in the long run in wearing out the MAC plus we aren't dropping 300+ frames in a 1 hour service. These are well worth the money. If you can't show your elders the value then hit me up via FB. Our church streams are fb.com/StPaulUticaSermons. If you check out the highlights we did in 2019 they are with a 1 camera setup. Towards the end of December we went to the 4 camera setup (LIVE School Christmas Program was our first live stream all the cameras and shows the audio video delays) and then March 28th we began full online service. I have been using it now for about 4 service. It has made a huge difference.

@timondegroot8307 4 года назад

@@OJUtter Hey, We are looking at PTZ camera's for our church. What brand/model are you using?

@taylordwyermusic 4 года назад

What’s up Jake! I’m 16 and I just got my first job in Ministry! I’m a Creative and Production team member for the youth ministry. I’ve been watching your stuff all the time! Keep it up bro!

@williamjoyner2306 4 года назад

Rachel BestCine Please, nobody buy this. It’s probably a scam and even if it’s legit they are way overpriced. Please report for spam.

@tolu619 3 года назад

@@williamjoyner2306 I'm guessing the comment you're responding to was deleted?

@victornico 4 года назад

Using blackmagic in worship? Something fishy going on here

@lifecenter9821 4 года назад

LOL. You won the internet today.

@JoshuaBlessed 4 года назад

Karens be crazy

@cyabongampaul 4 года назад

🤣🤣🤣

@rachelbestcine1794 4 года назад

IN STOCK AND SHIP SOON ORIGINAL ATEM MINI/MINI PRO,CONTACT ME GET MORE DISCOUNT: www.aliexpress.com/item/4000954825130.html

@CubeGuy 4 года назад

Don't tell my Christian employer that I'm using Blackmagic, a Devil Box eGPU, and a Deathadder mouse.

@YARIUS 3 года назад

Hi! When connected to the Sony a6400 Atem television studio HD, only black screen and sound are output. The format on the camera and the switcher is correct. When connecting other models of cameras, everything is in order (for example, Fujifilm XT-3). How to solve a problem?

@drpeks 4 года назад

For smaller churches, the blackmagic atem mini pro will be a huge upgrade and that might be the only piece of equipment you need to buy as it makes your computer think its output is WEBCAM. You can send 3 video inputs directly into it and your propresenter or proclaim output from another laptop into it. More budget friendly IMO than thinking of buying another capture card

@Reyfox1 4 года назад

Using the Mini, not the Pro. I saw no advantage to it since we use OBS to live stream to Facebook and have a really decent computer (AMD 1700X, 16GB RAM, AMD Graphics card), but terrible upload internet speed. BUT, you are limited to the length of the HDMI cable and you are able to only go up to 1080HD. I looked into getting HDMI to SDI and back, but the cost of the SDI cables is expensive and difficult to find here in Poland. Also with OBS, you can record to your computer too..... The Atem Mini will allow you to use different frame rate cameras. I have a 50P working with a 60i with the Mini.... There is no multiview with the Mini.

@wysland2210 4 года назад

@@Reyfox1 SDI is just a Coax cable with the SDI connector. You can buy long spools of coaxial cable and build your own SDI cables fairly inexpensive at least here in the USA.

@wysland2210 4 года назад

@@Reyfox1 Re: Mini vs Pro - if you are doing multiple angles, the multi-view alone is worth the price difference in my opinion. I also much prefer hardware encoding than passing the encoding to the computer that is also doing the streaming. When you add the ability to record to multiple disks on the fly to me this PRO is a no brainer if you're starting up. We use the ATEM Studio 4k and I wish it had some of the features of the Mini PRO.

@Reyfox1 4 года назад

@@wysland2210 here in Poland, some things are just plain expensive. Especially with the VAT. Whenever I head Stateside (I'm a native NY'er for 55 years retired living in Poland), I stock up on things that cost less than here. I'm not a solder type person. Made that I didn't learn it when I had the chance decades ago. I had someone working for me to do that. But I will investigate! As for the Pro, it does have features, but it's twice the price. We have zero budget, so the Mini works. OBS records if we want, but we only stream to facebook. We have 1 camera at the moment and with money permitting, will add a couple more. But that does take money and manpower...

@PleaseTakeOne 4 года назад

Please explain how you would send the propresenter feed from another laptop into the atem mini?

@prochurchtools 4 года назад

My ATEM Mini Pro arriving today 👀

@lukeramlet275 4 года назад

Weird flex but ok

@prochurchtools 4 года назад

They've been out of stock everywhere for weeks. I was excited to see my shipping notification on the same day Jake posted his video about it. Go off though.

@disccop75 4 года назад

@@prochurchtools How long ago did you order it?

@prochurchtools 4 года назад

@@disccop75 Last week. From eBay though. At an added cost. 😬

@disccop75 4 года назад

Pro Church Tools with Brady Shearer I don't blame you... I'm running out of patience myself

@matthewwillis7767 4 года назад

I’ve watched this like 6 times trying to wrap my mind around this technology!

@toolsofthefuture Год назад

Hello, I need a little help. I work in TV production. I have two graphics computers that separately send video and alpha key and I wont to send it to the ATM blackmagic switcher via HDMI (4 inputs). I send that signal (video and alpha) as input to the TV video mixer (2 outputs). In case of error, I need to switch the signal from computer 1 to computer 2. But the problem is that I have to send the second alpha video as well. Can I use the program output for video and aux out as alpha key and how can I simultaneously change both signals at once. P.S. Changing the single is the responsibility of the graphics operator, not the main video mixer.Thank you

@ashadeepindia 3 года назад

*Church in INDIA:* How can I setup all 4 cameras with a Multiview option in OBS with ATEM Mini? Is there a software that can give me Multi view ??? I am in India. Kindly help! David Amarjeet

@jessecohen1 4 года назад

You can actually use the downstream key instead of the upstream key, which is easier imo. You send ProPresenter to the BM switcher with a transparent background. Then add the camera source to your downstream key. You have a dedicated button on the BM switcher that says "DSK 1 mix". That way you always have a dedicated button to add lyrics and take them down easily.

@zackcollier6365 4 года назад

Jesse is the dedicated button on the hardware or on the computer control?

@jessecohen1 4 года назад

On the switcher that he is using

@dusting010 4 года назад

Alternatively, if you're using vmix or obs, you can bring in the presentation through ndi and free up an hdmi input :)

@beesteadyproductions 4 года назад

Hi Jesse, the downstrean keyer doesn’t support luma or chroma keying

@jessecohen1 4 года назад

BeeSteady Productions You don’t Luma and chroma with ProPresenter, because ProPresenter can send transparent backgrounds

@freddiehandley278 4 года назад

I am not at all religions, but these guys are honestly great! Really helpful for organising gigs

@prettysimplemusic 4 года назад

Brooooo you have been on it for the past few months!!! Great content and TO THE POINT!!!! 🔥🔥🔥🔥

@JavarGarrett 4 года назад

🙌🏾🙌🏾🙌🏾 ayyy K.C in the house!

@delavega989 4 года назад

@@JavarGarrett Lol Dr. Conley chiming in!

@gaeldilamh2572 2 года назад

Hey kv

@uprobo4670 3 года назад

BlackMagic in Church ... the irony is rich ...................

@whittleseycc 4 года назад

What could possibly go wrong?

@jbarron5888 4 года назад

Problem with the HD in comparrison to the Atem Mini or 4k is that all incoming sources need to have exactly the same framerate and size. If one varies, it will not be shown. The Mini and 4k scales signals for you

@ditchboy3698 4 года назад

Does the USB Webcam Out on the Atem Mini allow you to skip the capture card necessity? We use Ecamm Live, so I would think that we could just put our 2 or 3 cameras and ProPresenter into the Atem, then just do USB out to Ecamm as 1 single camera input and we're good to go. Right?

@itapmedia 4 года назад

Joel Cook yes the usb output can be used as webcam output. On the pro you can actually plug in usb drive for direct recording. Hope you answered.

@gerardsteenbeek9327 4 года назад

I use a ATEM Television Studio HD and control it with a Streamdeck and Companion ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xn95LuF6x6I.html Way easier than using the program on the computer. I also have a dedicated Key button to turn lyrics on and off. I have 2 feeds from my ProPresenter 7 Computer. One has the lyrics in lower 3rd, with a Chroma Key. The other is a full screen feed which allows me to also use ProPresenter to play videos or other full screen slides without the lower 3rd theme applied. I use Decklink cards in the ProPresenter PC to get multiple outputs with the right screen format and refresh rate for the ATEM. I have a dedicated person that runs the ProPresenter 7 PC and I run 3 PTZOptics cameras and switch on the ATEM. The PTZOptics IP joystick along with the Streamdeck are very easy to manage for one person. I record to a Hyperdeck Mini, which is not cheap, but the SD cards are easy to handle since I don't edit at the church. The Hyperdeck mini also has multiple SDI outs and HDMI out which allows me to send the output to multiple destinations. I stream using OBS and a decklink card in the video booth PC and also have an TV to monitor the output for the PP7 operator. I am also planning to send that feed to the nursery when Covid has passed.

@tv1394 3 года назад

블랙매직디자인 스위쳐 ATEM Television Studio HD 믹서에서 카메라신호와 마이크 신호 받아서 프리뷰로햐서 자막기에서들어가서 hdmi해서 캡처보드 보냐는대요. 믹서에서 멀티뷰 말고 출력단자가 4개sdi단자있는대 바로 출력하면 자막기에서 자막 입혀서 나가서 캡처보드 / 자마막기에서 자막 입혀서 믹서에 4개 sdi 단자로 출력 가능할까요?

@chris.j.scott4 4 года назад

This video was CLUTCH!! Now just gotta sell a kidney to get an ATEM switcher.... Thanks, Jake!

@jessecohen1 4 года назад

Chris Scott 😂 ATEM switchers are actually some of the cheapest switchers on the market

@chris.j.scott4 4 года назад

Jesse, right... and they are sold out and on back order pretty much everywhere.

@jessecohen1 4 года назад

Chris Scott I know, they need to make more already!! 😭

@PerfectHarmonyNetwork 4 года назад

Hey Jake! Love the channel...With the ATEM Mini Pro...there is a 4 camera limitation work around! I have a 4K HDMI 4x1 switcher hooked up to input 4. So I have cameras on inputs 1-through 3, and the 4x1 HDMI switcher Box on input #4 (as a sub group)...where I put 2- GoPro's and 2- Panasonic G7's on it, for a total of 7 HD-Cameras Feeds. The only issue is, when I switch through the 4x1 sub-switcher, there's a few millisecond of blackness, as the 4x1 switcher drops one signal and picks up the new selected signal...but I just make sure I have channel 1,2 or 3 on the program feed while I'm selecting the proper camera feed from the 4x1 sub-switcher.

@wordfellowshipchurch5164 4 года назад

Do you have a designated person running pro presenter for livestream or do you use the same pro presenter as your front of house? How do you accomplish this? We already have the BM television studio Hd running.

@freewookie1971 4 года назад

I have the exact same question.

@zackponyo2439 4 года назад

Dude you're the best! you combined everything simple and easy in one video. Thank you so much!

@kingmonkeygroup8669 4 года назад

Hi.... which cam dsrl is good?

@PhilipDosa 4 года назад

Would love to see behind the scenes at Upperroom in Dallas.

@worshiptutorials 4 года назад

Honestly who has the budget for THAT many OMEGA 500z cameras by 'Camera' 🤷‍♂️

@eugenelayton5231 4 года назад

Why give to a church that has to waste it on carp like this?

@RifaProduction 3 года назад

Bisa service black majic yang rusak

@DarinCates 4 года назад

SORRY .... there is no invisible man watching you above the clouds. It's time to GROW UP !!!

@predicationst405cp 4 года назад

The name is not so nice for our church. The devil owns black magic. We also did not buy DEMON spreakers... it would look real weird to look at all service long... use your brains, make "Blessing" speakers or produce "Heavenly video swithcher", that will sell for churches...

@Craig.thecreative 4 года назад

Hey Jake. For your expansion chassie, did you buy it with the decklink duo or did you have to purchase them separate and then add them together? Can you add the link for the exact chassie and the exact decklink duo you have? I’ve found a few, but I want to make sure I get the one you have.

@rachelbestcine1794 4 года назад

IN STOCK AND SHIP SOON ORIGINAL ATEM MINI/MINI PRO,CONTACT ME GET MORE DISCOUNT: www.aliexpress.com/item/4000954825130.html

@jessedameron7985 3 года назад

For using a mirrorless/DSLR camera in 1080p mode at 30fps to do Zoom conferences: Do you know how the video quality of the Blackmagic ATEM Mini compares to the Magewell Capture HDMI Gen 12 and/or the Elgato Cam Link? If I want to minimize latency, am I better off getting an internal computer card like the Magewell Pro Capture HDMI Card? I heard complaints about certain capture cards that use some form of jpeg compression that reduces the video image quality. Does that really matter? Does a device using USB 2.0 vs USB 3.0 make any difference in latency? (I know the Blackmagic ATEM Mini is a switcher with extra features, but at this temporary point, I'm just trying to understand differences in latency and video quality for each device using 1 mirrorless/DSLR camera.) Thanks.

@MoChuang343 2 года назад

I have a ATEM TV Studio HD and a BMPCC 4K and 6K Pro. I cannot get camera control to work. I have tried connecting the BMPCC to the HDMI port on the ATEM. I also tried connecting the camera HDMI to a BMD 3G bidirectional micro converter and then connect both SDI ports from the micro converter to SDI in and out on the ATEM. Neither setup will work. Can you confirm that this setup with BMPCC and ATEM TV Studio HD will work? Or do I need a different ATEM?

@markarca6360 2 года назад

Update: There is a new ATEM Mini model released: the ATEM Mini Extreme (8x HDMI inputs, 2x HDMI outputs - program out and multiview out)

@onzkicg 3 года назад

Hi, I’m a new sound guy at church- I noticed that the live stream audio I hear in (end product) youtube is different from what I heard from mixer & blackmagic- I don’t know how to describe but seems YT is missing some low end and high end (air) that I remembered hearing during my live mix. Especially the keyboards.. it sounded far and muddy in YT as compared to the FOH L/R I heard. Our setup is same as @14:52 “Ray/ alternative device”, that’s how we do livestream. Anybody have these issues? How did you resolve it? Thanks !

@jessidsanchez06 4 года назад

That like button joke made me go and like the video. Nicely done Jake!

@aaronjones6843 4 года назад

The only negative with the Atem Mini Pro is the single HDMI out. You can’t multiview and program feed at the same time. (Unless your program feed goes over USB-C into eCamm or OBS). That being said the amazing thing with the Atem Mini Pro is the record feature built in. I am using it every week now. Recording to a USB-C thumb drive and the entire multi cam with lower thirds shoot is recorded live! This saves hours and hours of work. Also the Atem Mini Pro has a built in streaming codec. So no need for a separate streaming PC you can go straight over hardwired Ethernet to any streaming platform.

@TSGEnt 3 года назад

Thank you for such a good fairly comprehensive overview. We've been using an ATEM HD switcher with PTZ Optics cams and a Canon XA55 and a GoPro. All work well. I've been in search of a budget cam we can mount in a static form for OS use and better use the XA55 for handheld and not just lock it down. I've tried the Vixia R500 as a low-cost OS cam solution, but the ATEM refuses to see it online. I've tried a few other low-cost solutions but none seem to work with the ATEM HD. I see you show a Canon Vixia R800. Have you used the R800 with the setup? Is there any other budget-minded cams you've used successfully with the ATEM HD?

@samcarr554 3 года назад

Can the ATEMs send the program feed into a streaming software like vMix? And what would you need to send it across?

@cardo5096 3 года назад

I want to know the same thing too

@hibbasc1 3 года назад

A dedicated encoder or hardware encoder built into the ATEM is a must. Lifting that load off a laptop is ideal.

@kyleduddleston4123 2 года назад

So I know this is an old video, but I'm confused about how our setup compares to what you described. (We have a very old setup and I'm in the process of updating it from about 20 years ago.lol) We have a PC on the left side of our booth with an operator running Propresenter for our lyrics and message slides. He is sending it to our screens on stage and sending a feed into my PC where I run the Livestream and recording. I have an old Roland video switcher that is getting video from the main camera at my right and from 2 old ptz cameras on either side of the sanctuary. The video comes out of that switcher and into my PC. I run Vmix and have it set up with a feed from the switcher, a feed from the other PC with Propresenter, an audio feed from our Behringer X32 (I think that's the model), and I have a couple of overlays for our Church Logo in the corner and an overlay for how people at home can give online during our tithe and offering time. (We have a mostly older audience, but are starting to get younger couples into our congregation.) I just send the stream to Facebook and RU-vid from Vmix using streaming keys with both sites open in chrome in the background to start and end the stream on each site. Is this a weird way to do this and are there ways to simplify as I build a couple new PC's? Our pastor wants us to be capable of 4k, so new computers which I can build myself (we are running dells from like 2011. Lol), new cameras and a new switcher.

@harolyngreen4381 3 года назад

I purchased the BMD TV studio HD & am using 2 Canon XA11 cameras but am not getting any feed out of them. Is this a common problem?

@miguelzayas9287 4 года назад

What do you think about SlingStudio?

@avozdoqueclamanodeserto9647 4 года назад

what if I use android phones as my cameras? What happens?

@alanzepeda4036 3 года назад

Hi, we have the ATEM television Studio HD, and the issue we’re having is trying to get all the cameras to display on the lower “black” screens. We get feed on the Preview and Program screens but can’t seem to get the camera feeds to display on the lower screens. Any recommendations of how to fix this?

@MariusDonici-SnowDesign 3 месяца назад

Yeah.. I have this product and use it for over 4 years now... My only problem is that the multiviewer is not working anymore. I see the grid and audio signal is showing on the monitor, but I don't see the images from my cameras. This is very weird. I looked on the internet and many people have this issue and nobody from blackmagic team offered some solutions. It is not about the firmware, it is not about the signals from the sdi/hdmi... something hardware is gone bad.

@WorldChangersYouthExperience 2 года назад

Thanks Jake! How can we get our cameras to also go to our in-person projectors (eye mag) using this equipment?

@mounirammi 2 года назад

Hi there can I use ATEM Television Studio HD to send a video feed of my choice (cameras feed, presentation software pc, live stream) to a projector or a TV, and switch between them ?

@michalwalks 2 года назад

Hi. I noticed you were using this with your GH5. Does the switcher control iso/exposure/aperture of the GH5? If not, how do you do that?

@tooleyoclock 4 года назад

ATEM Mini Pro is an awesome recommendation. If only I could find one I’m stock anywhere. I ended up getting the ATEM Television HD simply because I couldn’t get my hands on the Mini Pro. Or even a Mini. People are selling Minis on eBay for upwards of $1000! It’s just too perfect of a product for these times.

@anthonysandoval7681 2 года назад

Question: Since we don't have BM cameras we cannot color grade or color correct live to multiple cameras. What would be the alternative for this and how would I set it up. What's your recommendation?

@andrewhawthorne6197 3 года назад

I feel like most of these videos are out of touch with the smaller 100 people weekly or smaller. When the cheapest option presented is 600 dollars how is a small church going to actually afford an ATEM switcher.

@crystalspringstudios208 4 года назад

We are just starting to do streaming to assist those in our congregation that may have risk factors for Covid-19. We just purchased a BMD ATEM Mini Pro, our requirements were straight forward: 1) Live Stream the Service to Social Media 2) Record the Service and Post on Social Media 3) Connect to ProPresenter 4) Keep it cost effective, ATEM Mini Pro along with two lower end Canon camcorders with a clean HDMI Out looks like they will work well for us 5) We had to upgrade our internet connection to make sure the upstream bandwidth throughput was properly available to support Live Streaming 6) We are almost there and this video is REALLY helpful...thank you!

@mackereltuna6661 4 года назад

I am blessed to hear this. It makes me wanna look forward to achieve a live streaming with quality on our church as well here in the Philippines.

@ester-roseelias9884 3 года назад

Question, is there a way to connect the cameras wirelessly to the atem or only able to use hdmi from cameras to atem system?

@thomasbentley7747 3 года назад

The issue we have is the HDMI only inputs on the ATEM Mini Pro. I think the max distance is a 50 ft run. That may not be enough for where we need the cameras. Any suggestions as we only want to start with 2 max cameras.

@crapseven 3 года назад

Your videos are very helpful but I have one question and that is in the wiring connections between cameras and switchers. What brand cables do you recommend and is there a maximum length you wound not go over due to let’s say impedance

@tlb2732 3 года назад

The Word of God doesnt need all that. It is infinitely more powerful than all that expensive gear. Enough lights to see and a few mics and ample p.a. for the pastor, choir, and/or soloist is sufficient. Think of all the good work that could be done with all that money in supporting local and worldwide efforts, ministries, and mission work to reach people face to face who need the good news of Christ in their lives. I love good, heartfelt songs of inspiration. But they don't need this wall of technology to be effective.

@flowersbychrisinc 4 года назад

What is the box between the laptop and the bmd hd switcher? And, what does it do and what in installed in it? You can reach me at duker_doom@yahoo.com, send details or links to the box and what's in it. Thank you! Duker

@ethandabassman 4 года назад

Almost to 100k

@silascox6953 Год назад

Looking to upgrade our church Facebook live stream and interested in the mini pro and running 2 cameras. We do not have pro presenter currently or a designated laptop/pc to stream. Any tips or help you can give here as to what else we need? Do we have to have obs or something like this to stream or can we simply use the mini pro and the ATEM software on a computer?

@chrisb3784 2 года назад

In this setup, can you send different content from ProPresenter, to different destinations on the ATEM, such as in-church and live stream?

@maksimmayster4904 4 года назад

Using a screenshot from a Bethel multitrack video for your thumbnail I see 🧐 haha awesome content keep it up ;)

@HackingHollywood 4 года назад

TV studio Pro 4k has been my favorite switcher I've ever used, and I've owned 5 different switchers/ran Tricasters, grass valley systems etc. I'd encourage your churches to look into that piece of gear. I also wouldn't recommend the mini recorder, I'd go with a web presenter or an ultra studio. Hope this is helpful for people!

@clcbaltimore1964 4 года назад

why? does the mini recorder not compress the videos? what ultra studio is the best to use from black magic? the

@dslentertainment8240 3 года назад

U got it..lol

@robertschuller596 3 года назад

My question is, why do churches in Europa do not use the great opportunty to Stream . Is it because we have a real church and not a hall stuffed with technology?

@mmtenyakov 3 года назад

I curious about how can I achieve same result as yours when you change screens. for example when you switched from yourself as being the main screen to showing a website but then video of you talking was shown on button right corner? Thank you

@jazzyboydc 3 года назад

Question for u. Do the capture cards do all the video processing. Cuz I was debating getting an intel i9 processor. But it sounds like I wont need all that. Unless i plan on doing video editing on it. What is your thoughts. How fast is ur laptop. And is it fast enough to do all ur asking it to do

@ministerioltcog 3 года назад

Do you use both xlr inputs on the Television Studio from the mixing console? Are they left and right inputs? Or do you just need to use one

@Tizocr 3 года назад

you have a delay on the blackmagic is better the Aja products is you going to spend that much money

@zkantner 4 года назад

Jake, what exactly is that rig that contains the Decklink card? Almost looks like a DIY Thunderbolt 3 dock?

@zkantner 4 года назад

Answered my own question thanks to a lucky video placement in my Facebook feed: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ud72xaOlngY.html Thanks so much for your content, Jake!

@The100BestVideos 3 года назад

How do you get the blackmagic switcher to see the blackmagic cinema cameras?

@dannyroy8268 3 года назад

Sir do we need an Ethernet cable to configure the ATEM control software??

@jacobpreman9736 3 года назад

Hi, Thanks for your tutorial. I heard that for the audio recording you need to use delay feature because there will be a delay for the video through HDMI connection from the camcorder. So in order to sync both, a delay feature for the audio mixer is needed. I don’t have this feature on my audio mixer. So do you have any idea how to do this? Thanks. This is for a church.

@AndyPobjoy 3 года назад

Taken from the web: "The ATEM Mini, and recently introduced ATEM Mini Pro, multi-camera switchers lacked a really important feature: adjustable audio delay. When video and audio sync is critical, and the two sources are not aligned, a production can go to shambles quickly. Even a few milliseconds off can distract a viewer. Blackmagic has added adjustable audio delay for each analogue input on both ATEM Mini models. Prior to the update, users would either have to make adjustments at the mixer level, camera level, or purchase an audio delay box. This eliminates the need entirely and allows users to adjust settings locally on the ATEM Mini and ATEM Mini Pro switchers." I have an ATEM Mini Pro as well as a TV Studio HD. There are so many nifty features missing from the more expensive TV Studio HD that make life so much easier using the ATEM Mini Pro. When it comes to live streaming or web content creation, I would choose the ATEM Mini Pro or ISO any time over the TV Studio HD. If you need the extra inputs, go for the ATEM Mini Extreme.

@davidlavrinovich2257 2 года назад

Why not just an HDMI splitter? $15

@elchache21 3 года назад

Can I bring audio from my console to switcher so audio can be sync to video and record it to sd card so won't have do it in post production?

@caro18rod 2 года назад

Also what is the alternative to the BMD mini Atem switcher? My church board shut it down due to its name lol 😅

@onuohapaschal4058 3 года назад

Nice. Please what's the name of the streaming software you used

@RolandsZeltins 2 года назад

Is this 4K? Can you suggest some good 4K video switcher?

@ElTriOnline 4 года назад

One suggestion I give to everyone who is looking to LIVE stream, the ATEM HD works best. Don't go for 4k unless you're planning to archive it. Facebook and RU-vid only give the option to stream in 720p. Only Twitch and Mixer, from my understanding, allow you to stream in 720p. That is LIVE STREAMING. Now, if you're going to upload your video, then knock yourself out.

@JoshuaPaulKing 4 года назад

I literally just got an ATEM Mini Pro for my church. Haha.

@LegacyChurchGo 4 года назад

How did the setup go? I'm surmising that we wouldn't need any streaming software since the mini incorporates the streaming with the switcher. Is that correct?

@chapelcares 4 года назад

@@LegacyChurchGo Joshua King here on my church's account. Setting it up is today's task. The ATEM Mini Pro has a built in streaming encoder.

@JoshuaPaulKing 4 года назад

Set up a super easy. I don't know how to stream easier. very excited to get the whole thing up and running. We're going to start lives from you in a few weeks. But I could have live streamed this Sunday if we need to.

@floridanetworx 3 года назад

how can i output video from 4 devices at the same time instead of having to switch between them? like can i show 4 cameras at the same time? does the switcher let you show multiple sources at the same time?

@gwm-btdbattlesagar.ioandmo9988 3 года назад

can you use any capture card to feed the switcher to the computer or do we have to have the blackmagic one?

@johnwyte Год назад

So with the mini pro, I don’t have to run into an h264 encoder ? It has that on board and I can go direct to pro presenter/resi ?

@jerrytaylor2783 4 года назад

Thanks Jake, explained a bunch of info to make it much easier to understand. Great Presentation

@karinaespineli6952 4 года назад

This channel is such a blessing! thank you for posting these videos, especially at this time that many small churches are just starting to upgrade their multimedia ministry

@rachelbestcine1794 4 года назад

IN STOCK AND SHIP SOON ORIGINAL ATEM MINI/MINI PRO,CONTACT ME GET MORE DISCOUNT: www.aliexpress.com/item/4000954825130.html

@connerwright9277 4 года назад

Thanks for this video! A bit of an unrelated question: what kind of TV cart/mount is that? I really like the look of it.

@MatthewProAudio.11 2 года назад

will this set up work great without ecamm live and replace it with vmix ?

@espejovoice-over9954 2 года назад

Thanks for all the valuable streaming information. Quick question: What would be the basic and portable set up for Live Streaming, software and hardware. Thanks in adavance.

@juniashasenmaier2813 4 года назад

That was the Video I was looking for. I have seen a lot suck video on different channels but this one is perfect

@StvProd 3 года назад

Thanks a lots

@seonggkim 4 года назад

Jake - how do you feed not just lower thirds but full screen powerpoints or videos to the live stream? Do you just have a separate SDI that runs into the ATEM switcher, just like your lower-thirds one?

@TandrewD 4 года назад

If you are using a program like PrePresenter, it can send any form of graphic, slide or video to the ATEM Switcher. In the case of video, you would need to send the audio through a mixer or direct in via XLR.

@joshcruz4361 4 года назад

Does the Atem mini support “keying”

@HajongLee 3 года назад

I'm curious why you don't use a true alpha key with the ProPresenter? Can't you output two signals out (one fill and one key) with the SDI outputs on the DeckLink Duo?

@bgi.avgeek 9 месяцев назад

How do you get the wire from the camera to the room with the computer?

@caro18rod 2 года назад

Is it possible to do this and then use that same computer to run the in person projector?

@OutdoorsmenLee 4 года назад

So why not go with the Roland V1HD over the ATEM Mini Pro? I chose to go with the V1HD because of the extra HDMI OUT.

@SamSkorokhodov 2 года назад

Was missing the 3G recorder to get the presentation over 😅

@hisway86 4 года назад

id love to have you out to my church we need a lot of help setting up live and doing video im running it by myself

@lfisher8154 4 года назад

Thanks Jake! Is it possible for my ATEM Television Studio HD to use NDI sources output from ProPresenter? In ProPresenter currently using 1 NDI output for lyrics screen and 1 for a presentation screen and they work great today as camera sources in Ecamm Live but interested in fully going the ATEM route without the extra complexity/cost of an external card. ProPresenter is running on iMac; Ecamm Live on MacBook Pro with 8 core i9 processor and 32 GB.

@Joe7ist 3 года назад

What are you using to convert the hdmi to sdi?

@kensmichel7061 3 года назад

If someone can please answer me this because I’m sure church front won’t see this question. But how can I grab audio from my mixing board/DAW and bring it to the ATEM mini?

@otm777 5 месяцев назад

This is a great video. As a smaller church within a single camera angle we use PP7 for everything , including streaming out to Facebook. Our lower thirds are added to the stream via custom Looks and themes within PP. The only thing we're looking to do now is incorporate a Decklink Duo setup to handle additional display outputs. As we start to utilize additional cameras in the future, I'm sure we'll look into incorporating a video switcher like the ATEM mini Pro.