You can buy the gun, foot valve, and pickup tube from here: www.redlinestands.com/catalog... www.redlinestands.com/catalog... www.redlinestands.com/catalog...
Did a double take when I heard you say Pensacola Beach. I own Pensacola Ironworks right off Palafox. We are literally neighbors! Thanks for the videos. Next time I’m on the other end of Palafox I’ll knock on your door!
Copy that. Our showroom only has about a half dozen products so we aren't much more to see than just a shipping warehouse, but come on by and we'll give you the tour. Thanks!
This is a superb demo! Seeing the media running through your fingers is worth a thousand words! Doing glass is very useful to viewers. This is exactly how a demo should be. Very grateful to you. Also thank you for no obnoxious music. The natural sounds of media and your voice is music enough. Natural sounds educate, music irritates. Wish more RU-vidrs would realize that. I think beach sand has salt, so stays damp and sticky. Try washing it out first, then running through the sieve. I bet it would work great if cleaned up with water first. Walnut hulls may work well with refinishing furniture. Eco safe, lung safe, gentle, cheap. Thanks a lot for the demos!!!
Correction - I called this material garnet, but the manufacturer called to alert me it's not technically garnet, it's 10X. 10X is a mineral based media and isn't technically not garnet. My bad...
You saved me a lot of money and time. I'll give you an unsolicited piece of advice. If you are going to heat any kind of coating you need a multi filter full face mask because some of the resulting fumes will get you even before you can smell them
Blasting with any silica sand is very very dangerous it can cause silicosis which cannot be reversed or cured and can cause death . It is illegal to use in many countries and has been for over 20 years in Australia ! Can't understand how it is still sold in the U.S and how commercial sandblasters can use it knowing that it is dangerous even in your air fed blasting helmet but anyone else working near by is at a far greater risk because they aren't aware of the danger and are just breathing it in with no idea it could kill them.
@@ABentPaperclipThe problem is the blasting process pulverises silica particles to micron/nano sizes, not your average sand particle sizes on the beach.
It’s the USA. We still have guns, millions and millions of guns in the hands of everyone. And you think we should make blasting with sand a criminal offense? Concerns over sandblasting caused silicosis or the extremely poisonous fumes when using resin in the fiberglass industry,… well, you must be responsible first for your OWN safety. Then, secondarily, you must be responsible for employees’ safety. Being responsible for your OWN safety means you will guard yourself against being sued by injured employees who choose not to follow safety protocols. You must fire those who are too ignorant and of such low IQ that they cannot work safely. Such is life, and for many, life is hard and short.
@dwainseppala4469 if you don't like people here having guns and think it's any of your business I suggest you put your money where your mouth is and come and try to take them yourself. Otherwise just play your video games and be glad there are people like us to provide you a blanket of freedom to sleep under
Obviously they aren't gonna ban sand... as if you could even do that... there's a thousand different things you might need to buy sand for that have nothing to do with blasting. They also sell sand specifically for blasting without the silica content.
I wouldn't burn off powder coating because when I did my bull bar it gave off Hydrochloric acid vapour/chlorine fumes, both of which are incredibly dangerous. The acid fumes condensed out on various pieces of bare metal that generated rust within hours. Normally my workshop is very dry such that I can keep bare metal exposed for weeks without flash rusting.
I swear by aluminum oxide. It cuts fast and feeds great. Currently using White Lightning white aluminum oxide from a local abrasive supplier. It comes in different grits like sandpaper. You can cut it with glass beads to achieve a smoother finish if desired. When purchased in 50 lb bags, it's not that expensive (I think I paid $40-50 for a bag) especially is it's going to re-used in a cabinet. Aluminum oxide does wear out eventually....every once in a blue moon, it's a good idea to change your media. I also use a carbide nozzle on my blast gun....not cheap, but totally worth it compared to ceramic or steel nozzles.
Agree with the aluminum oxide for fast work. It does leave a rough finish but that works out well if you are planning to paint the part. And the carbide nozzles are a must. The ceramic ones don't last with the alum oxide. For more finer and delicate work, like carbs, I like to soda blast. I dont have to worry about the soda getting where I dont want it. The soda simply washes away with water. Cheers.
Great sifters are designed for gold panning and dredging operations. You can get a whole ranged set of them. They stack and fit right into your 5 gallon bucket. Very precise sifting. No spilling at all. ..
Thanks for a well done video. FYIO Commercial Sandblasting, with sand, is illegal in many states. Many of the suppliers of the pressure washer blasters recommend a 4000 psi 4 gal min. Typically an 11 to 13 hp gas driven pressure washer is required. One of the big advantages of Soda is you can wash it out of the interior of the panels. Do not leave any sand, or other media, as it will collect moisture and rust from the inside out. Keep up the good work. Enjoyed the video
Nice job.. that beach sand in that part of Florida is quartz but in most areas it it crushed up shell which is what we have in Texas. Believe me being a cheap ass I found out the hard way.
Reason powder coat paint is hard to remove is because the baked paint is somewhat flexible and absorbs some of the impact from the blast media. Think of it as like rubber. Thus heavier weight and "spikey"/sharp particle media does better to remove it. Glass bead media, which is a more rounded particle will struggle for example. Great video!
Powder coat is a polymer resin, not a paint. It is NOT flexible. Best way to remove powder coat is with a torch or industrial stripper. Please educate yourself before spewing BS!
Excellent video! Flame stripping is a very old coating removal method. I use a weedburner (carefully on thin steel) for that and a handheld wire brush. I secure the work on my tristand (any outdoor vise will do) when it doesn't weigh enough to stay put. I keep pieces of scrap especially angle with bolt holes to hold all sorts of work in my vises. Walnut shell is so gentle it's been used in aviation by applying it to RUNNING jet engines where it removes accumulated carbon etc. It's very much a specialty item and I appreciate you testing it. Liked and subscribed.
& I didn't want to watch this long video. Buttttt Im thankful I did. You had the best video and the last video i needed to see on sandblasting. Keep up the good work!
Thank you for this video! I have sandblasted off and on for years. Had my own business etching glass and blasting bear tracks in rock. I am starting to get back into it a little. Needed a refresh on media and this was perfect. The only thing I can add, if I remember correctly, is I think aluminum oxide doesn't break down as quickly as other media. Thanks again!
Great video I enjoyed very much. What psi were you using in your demo ? I use the glass bead 80 grit on painted, rusted cast iron and stamped steel which does pretty good in my blast cabinet. I might give the 70-100 mesh 10x a try and see how that works.
Here is my summary of this video for your notes: Types of Blasting Media ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XUc2JCYh39w.html Glass bead 20/40 mesh - OK on rust. Fast on paint. OK on powder coating. Poor glass frosting. Garnet 20/40 mesh - Poor on rust. Fast on paint. OK on powder coating. OK glass frosting. Garnet 40/70 mesh - Poor on rust. Fast on paint. Poor on powder coating. Fast glass frosting. Garnet 70/100 mesh - Good on rust. Great on paint. Bad on powder coating. Great uniform glass frosting. Coarse Black Beauty Coal Aggregate: No experiment done, but works fast on rust. It was too coarse for his gun. Beach Sand Sifted - Poor on rust. Very fast on paint. Fast on powder coating. Fast coarser glass frosting. The trouble is the moisture in it slows down sand flow, so I need to dry it out well first. Hardware Store Sand Medium Grit (needs to be sifted to remove large stones) Poor on rust. Fast on paint. Poor on powder coating. Great glass frosting. If paint has some rust, it won’t remove it! Aluminum Oxide 70 mesh - Poor on rust. Best on paint. Bad on powder coating. Best glass frosting. This is the priciest media. If paint has rust spots, it removes them all. Walnut Hull #12 Coarse Crushed - Useless on rust, paint, powder coating, glass frosting. Great for cleaning up plastic surfaces and probably wood furniture lacquer finishes. You can use finer hulls. Powder Coating removal - Heat up with a torch. Blast with sand to get this off fast. Heating it up makes a huge difference to it peeling off fast. Air Compressor: Kobalt (Lowes) 17.3 SCFM (this is the most important feature), 40 PSI, 155 PSI max, 5.0 HP, 240 Volt. I could not find this at Lowes. Here is the closest match for $2250 and they don’t mention CFM (air movement at Cubic Foot per Minute - the most important factor in blasting. Anything less than 17 cfm is useless for larger blasting projects) www.lowes.com/pd/MEGA-Compressor-80-Gallons-Two-Stage-175-Psi-Vertical-Air-Compressor/5014405385 Remember too, that these are noisy and the larger ones need 220V outlet, and they have a risk of exploding, so keep them in a sound-proofed, insulated cabinet.
If you have a chemical stripping company in your area, I feel it is the best way to go for body panels. The part is submersed in a stripping tank, so ALL the rust is removed, even in cavities and seams where you cant get with blasting. Then be sure to paint or seal in all the cavities and you will never have to worry about your trunk lid, door panel, etc rusting from the inside out. Just an option for folks. I also use my blast cabinet and outdoor blaster when appropriate. Thanks for the video.
Great video Very informative, Note of CAUTION though Always make sure You are not taking Sand from Beaches that prohibit this or You may face a hefty Fine, check the local laws first and make sure you ONLY take the permitted allowance if permission is granted.
I’m so jealous you live in Pensacola area. I grew up in Milton. I was a Navy brat. Lol went to to grade school to high school. Go Panthers! 😆 I love that area so much and miss it so bad. I’m in Daytona area and hate it. Anyway want to thank you for video. I’m trying to sand blaster a bird cage and heavy metal fire pit that has rusted. Thank for explanation .
I bought that screen material many years ago so I don't recall. Today we sell this sifter in the link below and it works great. www.redlinestands.com/catalog/shop-equipment-c-327/sand-blast-equipment-c-327_501/sand-blast-accessories-c-327_501_506/5-gallon-buckettop-blast-media-strainer-filter-p-3056
Very informative. Which media produced the least amount of dust inside a cabinet? I am going to purchase your REPP70 pressure blaster. I have a 40 hp diesel screw compressor I plan to keep outside and run the air in. It produces 100cfm at 100psi. It amazes me how small increases in nozzle size increase tremendous amounts of air flow. With a 1/4 inch nozzle I need 85 cfm. What size nozzle can the REPP70 use? Thank you
In my REPP70 at home I like to run either a 6mm or 7mm nozzle and that works well for me, but then again I only have 17 CFM to work with, but I make do just fine. I'd say the 10X produces the least amount of dust. Crusted glass gets really dusty fast.
@@RedlineStands actually you don't even have 17cfm unless you are blasting at 40 psi. at 90 psi you have 15 cfm. plastered clear as day on you compressor.
I used to live in niceville around the fort Walton and Destin area myself. That Quarts sand is amazing stuff. When you bring it back from the beach it's in your car and house for life lol. It sticks to everything. Even turns oil slicks into tar balls. And lighting loves the he'll out of it. It's a great conductor of electricity. That why things around there get wacked by lighting so much. I just wonder being it's been in salt water. If flushing it with fresh water then drying it would make it less corrosive to the metal your blasting. So you don't end up with rust under the paint job. I'm just thinking of possible salt contamination to the metal. Just possible food for thought, possibly what are your thoughts on this?
I can tell you this for sure. At the beginning of this Nova project I blasted some parts with play sand from Home Depot. I epoxy primed one of those parts and set it outside with only primer. Years later, it looks great.
The gun in this video can be found here www.redlinestands.com/catalog/shop-equipment-c-327/sand-blast-equipment-c-327_501/sand-blast-replacement-parts-c-327_501_507/re4870-48cs49270-sand-blast-cabinet-replacement-gun-p-1676
I have an all original 1957 chevy engine and powerglide for sale. It has the power pack heads and the Carter car along with the proper breather and generator.
Thanks, Enjoyed. I am trying to remove decades of paint from an upright metal belt sander. Rockwell made in 1942. I have a large blast cabinet and first tried soda. Poor performance. Plan B.
Soda is meant for more delicate parts, like carbs and soft aluminum. To remove "decades of paint" quickly I use aluminum oxide with a carbide nozzle. I restore vintage metal and woodworking equipment and the al/ox works best. Plus, it provides a nice finish for my primer to grab.
aluminum oxide is what i use and it's great for steel and aluminum for my powder coating, but after i use it and outgas it, then ill put it my other blast cabinet that has glass media, to fine out areas that are needed works great....im getting ready to buy black diamond fine and medium , what do you think about using it replace it with the glass ??? please let me know thanks
@@RedlineStands Thank you I appreciate your response. 10.00 a bag of black diamond fine, isnt gonna hurt my budget, so i'm gonna give it a try, and ill let you know the results and different application difference..if any !!!.. Happy New Years from my shop to yours
QuickCrete is the brand, so it's just sand, not QC and sand. I have used a good 3M respirator in the past and experienced no health problems after a full day of blasting. With that said, do not use a dust mask. You definitiely need something much better.
Yes there is a health hazard with any blasting operation, but especially with silica sand. In my 37 years in the equipment rental business, including many types of blasting equipment, I would say "NO", a respirator is not safe enough. Even a Positive Air Pressure device leaves traces of highly abrasive in your lungs, which you will need for the rest of your life. People breathe more than 10 times more air than they eat food by weight.
That's really tough to say. It depends on what you plan to do with the metal once you're done. For instance, is it aluminum? If so, are you going to polish it? If so, you will want soda because anything else will leave the metal badly pitted and would require sanding in order to polish it. Are you powder coating it? If so, then a lot of pitting is great, and I'd recommend something cheap like crushed glass or 10X.
@@terryrowles7703 It's probably powder coating. If you'll hit it with a propane torch and burn the coating really well it'll become brittle and will blast off easily.
@@RedlineStands Oh I didn't know that. I suspect all of those abrasives are deadly when they get ultra fine powdered and inhaled. I mean glass is the same as sand and garnet will get just as fine as glass. Gotta wear EFFECTIVE breathing protection. Thanks for the warning. ..
@@MrDavePed I Understand the Point being made, what I don't understand is how Marines can drive through the Dessert, for 18 days at a pop, Get covered from Head to toe with enough sand, they have to put bandannas on their faces to breathe, then spend hours cleaning that gritty crap out of everything. Trust me when I tell you that sand is about as fine a particle as you're gonna find after being ground up by 5 Ton Trucks and 15000 Lb. Howitzers or Tracked Vehicles, Yet, they still do this today!?!! I am glad to see so many people erring on caution though, sharing this information is working, Thanks Everyone!
Something like this? www.redlinestands.com/catalog/cool-stuff-c-286/racing-go-kart-stands-c-286_249/all-go-kart-stands-c-286_249_117/streeter-standard-racing-go-kart-stand-p-770
_"...running 17 CFM @ 155 PSI"??_ But the specs for that compressor are: 17.3 SCFM @ 40 PSI 16 SCFM @ 90 PSI 17.3 SCFM @ 40 PSI And _pressure_ (PSI) changes _inversely_ to _CFM_ (volume) - so the higher the pressure the lower the CFM. I'm guessing dude just misspoke since the "Max PSI" printed on that compressor is "155". But who knows what the SCFM would be a max 155 PSI. I'm not calling anybody out, it's just important to know exactly what settings are being used.
im disappointed a man of your age does not know the correct Star Wars quote you referenced. great video though, thank you for all the data you complied.
Beach sand, builder's sand, brick and block sand and play sand are not the best cutting materials. All of the above are rounded by the action of wind and water, and appear like ball bearings under magnification. Blasting sand looks like shards of broken glass with lots of "sharp" edges, before first use. Most media can be reused. Blasting sand can be reused up to about 4 times before it is no longer economical. Sharp blasting sand is manufactured by fracturing silica deposits, before drying and packaging, and must be kept dry for best results. Sieving and cleaning media is time consuming and therefore expensive. Silica, like asbestos, is an extreme respiratory hazard. Silicosis, also know as tunnelitis, killed at least 764 men working on the Hawks Nest Tunnel, alone. Other media, while being initially more expensive, may be less expensive when reused. The Kobalt air compressor is not capable of 17 CFM at 155 PSI. 155 is the max pressure, and 17 CFM is the cubic feet per minute at 40 pounds per square inch (PSI). PSI is like electrical voltage, and CFM is like current (AMPS). To determine power, multiply CFM by PSI. In use while blasting, the actual air pressure will drop to near zero, so therefore. flows more volume (CFM} Than specified. Good job on the video. I hope your wife forgives you.
You're absolutely wrong about the aluminum oxide! For some things, it's the cheapest Media you can get because it's infinitely recyclable granted you're using a cabinet. For some things, there is nothing better.
Be careful. It is illegal to remove sand from a 'beach'....state beach, county, city beach etc.. Tourists get away with small bottles but don't get caught walking away with a pail full..... I prefer buying bags of 'play sand' at Home Depot or Lowes, but, sift it! At least it's dry LOL
Illegal to remove but not to blast with? Can cause death but don't get caught walking away with a pail full? Tourists steal small bottles of sand??? A pail full must be a felony hope it's not your 3rd strike
@@catatonia1 Just answer your own questions and you'll be fine. Personally I would NOT remove any sand of any amount from any government owned beaches....... You need dry cleaned bleached sand.
Absolutely ZERO mention of silicosis from this guy at all means i cant take this man seriously. The physical demos he didcspeak for themselves but thats all I'd pay attention to.
i use aluminum oxide. but i recycle it till it is powder. beach or hardware sand, works about two or three times, before all the sharp parts are rounded off, ,blackjack is a little better, but still gets smooth, a lot sooner than the aluminum oxide . for a single run, it is great and cheap, on my cabinet recycling it. not so much, great vide thanks
Glad to hear it was helpful for you. Really thought when I made this video that the content was good enough to garner more than 11k views in 2 years but oh well.
@@RedlineStands I agree with you. I’m sandblasting for the first time and based on my search today there’s not much else on RU-vid with your scope and specificity.
@@andyspoo2 if you think a mask is sufficient then you are sadly mistaken. A respirator at the very least. But hey it won't hurt me in the slightest what you use. So by all means.
If you are going to do some serious blasting a siphon system is useless. Use a pressure pot. You will also need serious amount of air. 5 horse compressor is pretty well useless also. A superb media is Dupont Starblast XL.
