Timelapse of sculpting a hippo head in Blender and 3D printing it.
Printed without support on a Creality cr-10s
Hippo head is 120mm high and has a hole in the back so it can be mounted easily to a wall.
3DPrinter settings:
Z Seam Alignment: Shortest
Compensate Wall Overlaps: Off
Maximum Resolution: 0.5 mm
Maximum Travel Resolution: 0.05 mm
Maximum Deviation: 0.05 mm
Print Speed: 75 mm/s
Infill Speed: 75 mm/s
Outer Wall Speed: 12.5 mm/s
Inner Wall Speed: 25 mm/s
Top/Bottom Speed: 37.5 mm/s
Travel Speed: 187.5 mm/s
Initial Layer Speed: 20 mm/s
15 сен 2024