Blending clear when spot painting your car.

Подписаться 65 тыс.

Просмотров 136 тыс.

50% 1

In this episode I'll walk you through the process of spot painting a bumper, blending the paint and clearcoat like a pro. we'll paint it in a garage with no booth just like you might do at home. I'll use a low air pressure paint gun the Eastwood Lt100 with finish1 fc710 spot panel clear. All of these thing are designed to make this repair as easy and effective as possible for the hobbyists or pro. I hope you enjoy the video and don't forget to like subscribe and leave me a howdy!
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
beginners guide to paint a car
• Beginners guide to rep...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
My amazon affiliate store : Tools and materials categorized to help you find what your looking for.
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
SUPER THANKS BUTTON
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
Products and tools in this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
finish 1 fc710 spot panel clear
amzn.to/3QumBTV
Eastwood concourse Lt100 paint gun
amzn.to/3OudnVX
upol blend #9
amzn.to/3N48p0W
anti static wipes
amzn.to/3lyoAsc
color blender/wet bed
amzn.to/3wHsvI7
800 grit grey scuff pad
amzn.to/3wH4f93
3/4 masking tape
amzn.to/3NuLLiM
1 1/2 inch masking tape
amzn.to/3sNDMFy
Iwata kiwami4
amzn.to/3xs9k7a
Premium Tack Cloths, Bond Crystal Brand 18" x 36" 12 Cloths Per Box
amzn.to/3gfCfAK
automotive plastic sheeting
amzn.to/3yV6gRJ
Kleanstrip Prep-All Wax & Grease Remover, Gallon (KLE-GSW362)
amzn.to/30nRBwV
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Go pro 7 black
amzn.to/35ddyAf
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Acer Nito 5 laptop
amzn.to/3wvc2W0
Song: Dipcrusher - Islands (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: • Dipcrusher - Islands (... -----------------------------------------
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

Авто/Мото

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 242

@costak7679 Год назад

Watched over a 100 videos on spot painting.. this one is THE ONLY one that's correct

@GarageNoise Год назад

👍appreciate the comment and support!

@andrewkeeney701 13 дней назад

Just getting into this at a pretty senior age and have been learning a lot from your videos. I really enjoy your instruction and presentation. Ordering my Aeropro A610 on Prime Day and will continue watching and getting smarter! ;-) Thank you, Andy K

@GarageNoise 7 дней назад

Rock on!

@petert696 2 года назад

Very concisely described process. Thanks for helping

@johnhowlett5526 3 месяца назад

Great tuition, gonna have a go myself on a Copart car I have in the garage, bought on a whim. Couldn't do it without video's like yours. Many Thanks

@GarageNoise 3 месяца назад

Right on!

@dthetruckguy1499 2 года назад

Thanks for sharing your work with us. You and some of the other RU-vid painters have really helped me with my project car. I’ve been painting the car little by little. One panel at a time lol. Still learning.

@GarageNoise 2 года назад

Awesome to hear! I appreciate the feedback! Share pics of your project at garagenoise247@gmail.com

@Greyfox1800 2 года назад

I like the explanations and the fact that you offer options to a complete panel paint job. Thank you!

@GarageNoise 2 года назад

Thank's Richard for the support!

@robertcharlton1551 Год назад

The touch up with small spots was just what I needed. Thanks a bunch. Keep on keeping on. You are appreciated!!!

@GarageNoise Год назад

Thank's Robert appreciate the support!

@scottroby2769 Год назад

Excellent concise instruction, I'm getting ready to paint my 97 Trans Am with a budget Eastward gun. I'm going to binge watch your videos first.

@GarageNoise Год назад

Awesome! You can do it!

@007camera Год назад

Thank you for sharing your expertise with your audiances ! 🌺

@GarageNoise Год назад

👍🙏

@AD-uw6bd 2 года назад

I love how professional your videos are. It gives me a lot of insight on how to do proper body work. Thank you.

@GarageNoise 2 года назад

Thank you! Appreciate the comment and supporting the channel!

@daleshaeffer4059 Год назад

Concise and informative as always> Thanks!

@GarageNoise Год назад

Thank's brother! Appreciate the comment and support!

@kkk-wp1kv 2 года назад

Needed this thanks chris howdy howdy👍👍👍

@jackbrown2325 10 месяцев назад

Very helpful , esp the clear coat blending ..thank you .

@GarageNoise 10 месяцев назад

Glad it was helpful!

@robertcharlton1551 11 месяцев назад

You amaze me as you teach me new skills. Thanks a million.

@malcolmlaing8892 8 месяцев назад

Thank you for sharing, very helpful advice.

@GarageNoise 8 месяцев назад

You are so welcome!

@stevenbradford1662 Год назад

Great information, enjoyed watching.

@GarageNoise Год назад

Glad you enjoyed it and thanks for the support!

@martymcfly3986 2 года назад

great video man. thanks a million

@mariodacunto9298 7 месяцев назад

Nice job. Very thorough. Ty

@grunter222 Год назад

Best video I've seen on how to blend in paint. usually its a whole panel but that sometimes is not practical. Thanks Awesome job. I,m gonna give it a go using your great tips.

@GarageNoise Год назад

Awesome! I appreciate that. I typically do this type of blend but like you said sometimes it's the best solution for a situation. Appreciate the comment and support!

@adriandeb2710 2 года назад

Hi Chris, another great video, i am doing my neighbours bumper next week so this has come a great time

@GarageNoise 2 года назад

Perfect! Appreciate the support

@Subielicious22 10 месяцев назад

Love the video! Great info! Keep up the good work!

@GarageNoise 10 месяцев назад

Thanks brother! Appreciate the comment!

@miguelquiroz1550 Год назад

Thank you so much. very clear explanation. This helped me a lot. !

@GarageNoise Год назад

You welcome brother! Appreciate the support!

@frankvalencia9227 2 года назад

Liking that gun!!..awesome job Chris!..

@GarageNoise 2 года назад

Thank's brother!

@geoffreyrawlings9736 2 года назад

Great video Thanks.saved

@jonrivera4735 Год назад

Very good technique and a clean looking finish. Nice work.

@GarageNoise Год назад

Thank's for the comment Jon! Appreciate the support for the channel!

@rw3476 Год назад

Nice and to the point. Excellent tips for us DIY guys

@GarageNoise Год назад

Thanks 👍

@Lightninghot1 2 года назад

I had a 1980 Corvette. At that time they used lacquer and I used to do some repairs. I have a new Infiniti in Graphite Shadow. In one week I damaged the front and rear bumper. Bad luck I guess. I’ve never worked with metallic paint or clear coat before but I’ll give it a shot. I learned a lot from your video thank you and please keep them coming. LD

@GarageNoise 2 года назад

You can do it, not that tough and clearcoat is forgiving . Be sure to check out my other videos. I would use a wet bed /color blender

@anonintellect9882 4 месяца назад

Good stuff, thank you!

@lucasellyson6872 2 года назад

Gorgeous

@divyajnana 10 месяцев назад

Watching this is pure genius, what are pro. Thank you for the great tips.

@GarageNoise 10 месяцев назад

You're very welcome!

@debt172sop839 Год назад

Great job! Thanks

@GarageNoise Год назад

Thank you too!

@leonardwalker9496 10 месяцев назад

Appreciate your skill and expertise. Great work!

@GarageNoise 10 месяцев назад

My pleasure! I appreciate the support!

@nelsonramos2218 2 года назад

As always a good info and tecnique video 👍

@GarageNoise 2 года назад

Thank's brother!

@beckyparker6165 Год назад

Awesome video, very well explained, got a project just like it I need to do . Thanks

@GarageNoise Год назад

Appreciate it! Thank's for the support!

@sfspencer1 11 месяцев назад

Thank you sir. Good info.

@GarageNoise 10 месяцев назад

Very welcome!

@brendamcleod6475 9 месяцев назад

Lovely 😍.

@GarageNoise 9 месяцев назад

Thanks 🤗

@dutchtileworks1332 Год назад

Thanks Chris, now i can do my own project at home 💪

@GarageNoise Год назад

Your welcome! Appreciate the comment and support!

@iSleepDoc Год назад

Great video 👏

@GarageNoise Год назад

👍

@russelblackwell6041 Год назад

great video thanks

@GarageNoise Год назад

👍

@kevintoms9338 6 месяцев назад

Absolutely brilliant video, doing a similar repair and got this video as a go to. Thanks so much

@GarageNoise 6 месяцев назад

Great to hear!

@TheJoepeanut Год назад

Great blend

@GarageNoise Год назад

Joe Bro! Like that 👍Thank's buddy! Appreciate the comment and support!

@genemat3443 2 месяца назад

Looking good Nice teaching

@GarageNoise 2 месяца назад

Thanks a lot

@aimized1460 2 года назад

Amazing work and video ! You mentioned this is also doable with spray cans ! I would love to see you do more videos using spray cans ! Some of us don’t have spray guns and compressors to paint I’m sure you understand, anyways just a though have a great weekend buddy !!

@GarageNoise 2 года назад

I've got one coming up soon! Thank's for the support

@kennethmorgan2704 11 месяцев назад

Good job!!

@GarageNoise 10 месяцев назад

Thanks!

@ozkrpalminteri9431 Год назад

Awesome

@GarageNoise Год назад

👊

@craigmccarthy2114 Год назад

Snap on spray painter gun's and blue point are really good

@rabihshwihneh5379 10 месяцев назад

You are amazing 💯

@GarageNoise 10 месяцев назад

Thank you 🙌

@patrickboyd3364 Год назад

Your sure doing a lot of work for such a little space on the rear bumper.

@GarageNoise Год назад

👍

@raylagos328 9 месяцев назад

Nice 👍🏽

@emilymalave8546 Год назад

good work

@GarageNoise Год назад

👍🙏

@HowtoRestoreHeadlights Год назад

Lifesaver here!!!

@GarageNoise Год назад

Thank's brother!

@NissanMarchK11 2 года назад

Dope vid! you just earned a new sub!!

@GarageNoise 2 года назад

Thank's! Welcome to the channel!

@Bitplex 2 месяца назад

Amazing process, a couple of questions however. Why didn't you need to sand the clear coat down above the damage (on the natural body line)? You sanded the rest of the panel, but in this section you sprayed the base coat and the clear coat over un-sanded clear coat. You also scuffed the clear on the bottom left panel (from the damage), and blended that into the rest of the panel - but was there a reason you didn't do this on the right side of the damage? (You instead sanded and resprayed that whole bumper). I'm new to this, but it felt like you used 3 different techniques - one above damage, one to the left of damage, and one to the right of damage, to achieve the same or similar results.

@shawnrenaud2252 11 месяцев назад

Good video.

@GarageNoise 11 месяцев назад

Thanks!

@samiquresh5294 10 месяцев назад

excellent explination, i

@GarageNoise 10 месяцев назад

Many thanks!

@jasona6222 Год назад

Good job on what can turn into a cluster fck real quick. I’ve never used the blending agent, curious if it has a tendency to get cloudy after time. I always over reduce my clear with lacquer thinner after clearing and burn my edges. It blends good but usually dies back over time. Also, I usually dust my base on really dry…more air than fluid. Helps to keep original clear coat from wrinkling.

@GarageNoise Год назад

Good tips! A lot of different ways to do it. The blends will fail over time. Appreciate the comment and support!

@kyrptotech 2 года назад

Hey, Chris. Talk about a well-timed video! I've watched it three times already. I burned through a door edge wet sanding, and I need to repaint and blend it in to the rest of the door. I really dig that you're using the LT100, too. I'm using a Kobalt Quiet Tech 26-Gallon Compressor, and the LT100 is the perfect gun for that setup. Also: If you're looking for video ideas, I'd vote for one about how to paint door jambs without taking the doors off. 👍

@GarageNoise 2 года назад

Thank's for the comment Jeremy! Yeah really enjoying the lt100 . The fact that it works well with your small compressor is good information.

@ANDY-we7mr 2 года назад

Cracking job 👏 chis well explained as usual so Chris a blending coate it's just a clear coat what you put on first

@GarageNoise 2 года назад

No, that is clear basecoat. Basically paint with no color. I havs a few videos on the topic if want to understand it better.

@aimized1460 2 года назад

@@GarageNoise in the video you showed a can of spray max 2k clear with a color paint can but it wasn’t for the car. You said it can also be done using the cans right, so my question is, would it be better to spray the 2k clear over my primed quarter panel repair area and than proceed to shoot the metallic colour right after onto the 2k clear as you say it helps the metallics lay better. Or would I be better of to spray my colour first which is a black metallic sapphire bmw 475 and than proceed to clear it with the 2k and use the spray max spot blender to feather new to old clear coat ? Your professional opinion means a lot. Your a great teacher !!! 🙏🙏🙏

@GarageNoise 2 года назад

@@aimized1460 no don't spray base over wet 2k clear that will create a problem.

@GarageNoise 2 года назад

@@aimized1460 ok, you getting 2k clear coat confused with clear base coat . Clear base coat is what helps blend metallics. 2k clear coat is a top coat only. Here is a video that will help.

@GarageNoise 2 года назад

@@aimized1460 watch this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6TLp-YP2hfY.html

@BigMoch 9 месяцев назад

Great

@acuramdx62 2 года назад

Good video ! I was wondering would you try showing a repair with aerosol

@GarageNoise 2 года назад

For viewers that don't have a compressors or paint guns. I will have a video on it soon.

@lad63bird Год назад

EXCELLENT VIDEO,I was hoping you were going to use the type of blending clear that you put right in the gravity cup! Not dissapointented at all though . I always wondered if you should 1500 grit well beyond the blend to then come back with my high speed buff and 3m polishing compund and a foam pad..., you did answer all that for me thanks!!

@GarageNoise Год назад

Appreciate brother! Thank's for the comment and supporting the channel!

@lewymartain8267 28 дней назад

Pity you didn't show you polishing the join out. Great video!

@67polara 2 года назад

I get that there's a market for this kind of work ie DIY guys and used cars but I hate when shops do this to my car. You always see that blend in a year or so no buffing that away. And it will peel around that chrome you taped up it can't be scuffed all the way down in there. Good stuff to learn though.

@jq8792 Год назад

Agreed. This is a terrible repair especially considering it’s not hard or much more expensive to clear the entire bumper (the correct way.

@thomaswahahauw560 Год назад

@@jq8792 oke so we don’t need to repaint th whole bumper? only re-clear the whole bumper in this situation?

@jq8792 Год назад

@@thomaswahahauw560 yes sir. Blend the repair area then clear the entire bumper.

@209_Tint_Shop Год назад

Maybe customer wanted it done as cheep as possible

@andrewhigdon8346 Год назад

These bumper covers are so easy to remove it seems like it’s more of a pain to go through all the blending and creative masking than to just do the whole cover. Yes, paint is expensive, but add up that plastic used to cover the ENTIRE car plus the foam, the tape, the time, etc, versus only taping off the chrome and the scuff panel(in black, also deceptively easy to remove and replace, and removes any chances of the other commenter’s remark about the edges peeling. Indeed, if ANYTHING can grab an edge, it will, and subsequent attempts at sanding and buffing will undoubtedly find those edges and weaken their strength. Splitting hairs? You betcha I am, cause that’s the difference for longevity. Another person’s car? You may or may not care. Your own or family or friend’s car, you care. In 6 months or a year, do you really wanna hear even the most kind request to “touch up” your previous “fix”. I am knee deep into preventing just that as we speak on my mom’s car. I know her and know myself. If I see it. She will see it. If I are, she will care. Period. I can see the future, and if I don’t get it just right to MY standards, I’ll be doing again. I have painted parts of this SUV so many times I lost count. The hood, going into the teens. The passenger side I finally got so good it does t even need a cut-n-buff! Finally satisfied, as a cut-n-buff is how I got here in the first place, having burned through parts where I had put down so many coats of paint and clear I figured it would never get through. Wrong. In fact the OEM paint getting burned through was what led me here. I turned an average scratch and chip fix into a mostly full respray, all except the roof, where there was no rust, no dents, no dings, just chips and scratches, some pretty deep, and the blends just were not cutting it, pun intended. The finish I got on this last attempt, the passenger side, is so good I’m about to redo the drivers side. I definitely got myself into a hell of a bind but I’m forcing myself to learn something I once took for granted. Now, I understand why it could cost $10,000 for an OEM type repaint. Even though tons of hours have been spent on trial and error, the learning curve has been steep, but worth it, but I’m well into nearly 1,000 hours on this thing. Again, this last attempt has made the journey worth it. I still have a hard time looking at it and going, “damn, I did that!” An attempted run repair on the otherwise glass-like rear bumper cover brought me here, and watching this made me decide NOT to spot blend, but just respray it. The ends must justify the means. Always.

@tedc9306 Год назад

@GarageNoise Год назад

👍👊

@debardelabenc Год назад

U definitely know your stuff 👍 though most paint manufacturers say to use light grit sandpaper like 3000 on end of blends . Only recently did find out the gray sotchbrite is key to good blends. I know blends are not recommended or warranted by paint manufacturers is very good skill to have especially sectioning of rocker panel and pillars

@GarageNoise Год назад

Agreed good skill to have but only use it as last resort and with customers consent. Appreciate the support!

@Stingyduce Год назад

You can also back polish the blend zone with rubbing compound with a pad then clear right up to that area then immediately use upol #9 until the blend zone turn clear and most importantly dry the blender with low air on your gun you not need to buff nothing, saves a lot of time

@timmoulthrop8510 Год назад

Sure there is a time and place for this it's called saving time and materials for a car that's going to get damaged again any way. Its a soccer mom car

@GarageNoise Год назад

For sure!

@mikeoravecz 2 года назад

Great job and thank you for your time and help. Question..can you use a slow reducer to blend in the clear if you don't have blenz in?

@GarageNoise 2 года назад

Yes, reducer works just as well but don't put in on heavy

@bayramilhan30 3 месяца назад

👏👏👏

@GarageNoise 2 месяца назад

👍

@CA-pv5ie 2 года назад

Love it Chris, thanks tons! One question, clearing over the back up sensor is ok I guess hey? I never know if I should try to protect it or not.

@GarageNoise 2 года назад

Yes ,it's ok they are cleared from factory

@ruben9388 2 года назад

When removing the masking , do you remove it once its fully cured , or 20 mins after or right away ? Thanks for the awesome videos and tips I appreciate it man

@GarageNoise 2 года назад

Not right away, about 20 minutes is good.

@dini1046 Год назад

Came out great. Im looking into fixing under paint rust in a corner of my roof and a bird etching on the hood of my car thats deep into clear/paint. If anyone has some tips i would appreciate some feedback. Its a 11 subaru outback.

@TedTravis 8 месяцев назад

Excellent tips- you make it look easy! I'm repairing damage to a motorcycle carbon fibre cover that needs clearing just on the repair and not the entire piece, so I needed to understand how to do this and your vid helped. Is it possible or adviseable to mask off area, spray the clear, and then try to blend hard mask line w/ 1000- 1500?

@GarageNoise 8 месяцев назад

Stay away from a hard mask line. Appreciate the support!

@timmoulthrop8510 Год назад

Show how to repair newly painted panel with color and clear. Also keep area small. I'd love to see that. That keeps us from refinishing entire panel.

@GarageNoise Год назад

That's a video that is on my list to do. Appreciate the comment and support!

@timmoulthrop8510 Год назад

I'm body tech at a high-end shop 45 yrs experience. Spent the first 20 as painter. I'm not about to retire but have recently been doing combo in home shop. I still enjoy paint work but cost of material sucks the fun out of it. I just wanted to see if I could still do quality paint work at home , thanks for your videos looking forward to spot repair on fresh panel.

@jarretjanu322 2 года назад

With the wet bed/clear base I’ve seen a few videos on it, but do you apply your base immediately after that clear base while still wet, or do you allow it to begin flashing?

@GarageNoise 2 года назад

Jarrett, I feel like either way works well . If I'm sprayin a silver or gold I try to apply the color while the clear base is wet. Appreciate the support brother!

@tannerlippiatt8387 Год назад

Are you suggesting that we could use the 2k aerosol clear coat (or other type of aerosol clear coats) to use as a wet bed? I thought there was a difference between a clear base and a cleat coat. Nice video!

@GarageNoise Год назад

No don't use Aerosol clearcoat as a wet bed. Clear basecoat is what you want to use some call it a color blender. Speedcoat make a color blender that works well. Appreciate the comment and support!

@Go69 11 месяцев назад

Excellent information as always. I've got a few small spots on my silver metallic truck that I would like to fix without re-painting the entire truck.. Your video-and the information within, will absolutely help me accomplish that.

@GarageNoise 10 месяцев назад

Right on! Happy to help. Appreciate your comment and support!

@designsinorbit 8 месяцев назад

Quick question...if you were planning to polish the entire car after fixing that area, would you still tape off the entire car?

@GarageNoise 8 месяцев назад

Yes, clearcoat overspray will cover everything in an enclosed space.

@tailwhipolaf Год назад

thanks for showing how to clear coat blend. looks like i need a blender can before i proceed with my clear coat blend. Can we see few month later results? is clear coat blend still good? I noticed you put down wet bed, What is that? does that help clear coat blend?

@GarageNoise Год назад

You can just use reducer to wash in the blend it works well too. You don't have to use clear base but it helps metallics lay down. Check out this video for how to use aclear base. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6TLp-YP2hfY.html

@olidufour6085 2 года назад

Nice video as always Chris! did the fc710 loss gloss a bit Compared to the fc720? Still torn between those 2.. I like the dust free time of the fc710 since I don’t have a garage 😬 just temporary setup with plastic sheeting 😅

@GarageNoise 2 года назад

I've used the fc710 a few times now. I will bwe doing a review but I love it! If your not doing an overall paint job I would definitely use the fc 710 I painted it in 95° heat and it flowed out beautifully no dieback held it's gloss perfectly. I haven't had the chance to cut and buff it tho so i can't speak on that.

@olidufour6085 2 года назад

@@GarageNoise wow nice! Can’t wait for the review then 😁 pretty much sold on the fc710 my repair will be rust on lower front fender and I need to blend on the front door so pretty much perfect for that job! Thanks again ☺️

@JimV90 Год назад

I just tried this and I got some overspray beyond my sanded area that will scrape off with my nail. If I get all the extra loose clear off, how do I avoid the hard edge up to the point where it actually sticks? Will the upol #9 work even on the dry/semi cured clear edge? Hope that makes sense.

@GarageNoise Год назад

Upol #9 won't work after dry. It alway good to give yourself more prepared are for the blend cause you can always buff it after its cured.

@flipper2473 Год назад

Hi, so is the technique of blending paint or clear coat having a loose mask of paper so the paint or clear coat can sneak underneath mask? When you sprayed the clear coat, was there a noticeable difference in finishes on that bumper? This is exactly what I am attempting, and could use the advice. Thanks

@GarageNoise Год назад

Follow the video but the idea of the paper is so you don't have a hard line of clear and yes so a little clear sneaks under there then spray over the blend with the upol #9 or a little bit of straight reducer will help it to melt in. Then a light buff away from the blend. There shouldn't be a difference in the finish othe than the blend area should only be slightly duller. Hope this helps appreciate the support!

@jeffpalazzo4066 Год назад

If you were using the cans would you still use the clear before putting on the paint . If so would you use the same clear for after aswell as before ?

@GarageNoise Год назад

What I put on before paint is clear base coat, not clear coat. Some other names are color blender or wet bed. It's not completely necessary on a small job.

@leopoldomatheus7033 Год назад

Usually what is the durability for blending lines to last ? Do also do them on panels that are normally facing the sun ? Thanks for the advise

@GarageNoise Год назад

It's hard to say but they will fail eventually. What I mean by fail is you'll be able to see them. The blends will last if it's not getting direct sunlight . Appreciate the comment and support!

@rattedbug5003 Год назад

Is that no 9 like fade out thinners?

@edgarromero8551 Год назад

For something small like this I would just scuff up the reaming bumper prime and paint, I hate the blending

@GarageNoise Год назад

I do too. I don't recommend it but point of the video is to demo how to do it. Appreciate the comment and!

@200xcBruce Год назад

I use aerosal from Microfinish on my repairs. Curious about whether my Ingersoll Rand 2hp 20 gallon needs an air dryer for an occasional paint job. And what gun to order if I decide to step it up. Do guns have a filter on them I see the regulator.

@GarageNoise Год назад

I add a inline water trap. Cheap insurance

@200xcBruce Год назад

@@GarageNoise I have that for my air tools. Thx

@spectre3492 Месяц назад

i tried spot repairing an issue on my front bumper at the top where it meets the hood. When I sprayed the clear coat I hadn't seen this video yet so now I can see where the edge of the clearcoat I sprayed is and where the factory clear coat is as well. How would I redo this repair so you can't see the edge of the new clearcoat I sprayed? I'm concerned if I spray new clearcoat over this again that it's still going to show the edge of the clearcoat I just sprayed.

@GarageNoise Месяц назад

If you dont want any blend line it's best to clear the full bumper but if you don't want to do that you need to wet sand it down a larger area past the current blend add basecoat and then clear . Washbthe blend line in with reducer and finally buff making sure to buff away from the blend

@husky1239 2 года назад

Great video Chris I do love these smart repair job's well explained now the spray gun you was using was a 2 cfm what cfm was your compressor I am interested in getting a compressor what cfm do you recommend for a 2 or 3 cfm spray gun also how dose it spray with a 2 cfm is it more controlled thank you for this video would not mine seeing another smart repair video

@GarageNoise 2 года назад

The gun I'm using requires 4.25 cfm to operate consistently. Viewers have said they use this gun with a 25 gal compressor from harbor freight. I haven't been able to test this gun with a small compressor but plan to. Get the largest cfm compressor that you can afford. Mine produces 16-17 cfm's. Thank's for watching!

@toycoma98 2 года назад

Summitracing LVLP says 3-4cfm but its pretty much the same gun as LT100. I have both and the aircap are the same. I use a 20 gal Husky quiet compressor.

@husky1239 2 года назад

Hello I can get hold of a 50 liter with 2 hsp 9cfm do you think I won't be ok with this compresaer to run a lvlp

@GarageNoise 2 года назад

@@husky1239 I think it would run this gun for sure.

@husky1239 2 года назад

Thanks for that so I would be ok I mean 50 liters I like 10 gallons 20 gallons would be 90 liters I suppose if the hsp is 2.5 it would be good

@timgiesin4025 Год назад

Can you use a reducer instead of a blending agent

@GarageNoise Год назад

For the clear blend yes. Light coverage tho appreciate the support!

@LuisC202 2 года назад

Chris, i am using Kleenstrip Prep all as my Wax and grease remover then i wipe with alcohol and see some minor fish eye. Can you tell me what Waz grease remover you use please.?

@GarageNoise 2 года назад

Kleenstip is what I use. Luis we're you the one I was talking to about solvent pops ? Are you using clean rags?

@helpfulcartips7423 6 месяцев назад

What kind of paint gun are you using that requires 30psi at the inlet? That's insane. I never go more than 10 at the inlet.

@4kkroto 2 года назад

Great video. How much a job like this will cost

@GarageNoise 2 года назад

Not a client's vehicle but I would think around $300.00

@digar4432 Год назад

Do you have a video on how to blend single stage ?

@GarageNoise Год назад

No I don't sorry.

@computersmilodon Год назад

How long would you say this kind of repair lasts before failing?

@GarageNoise Год назад

Hard to say this being that it's down low and away from the sun probably years.

@rayheller8450 Год назад

I am spot painting my door on my truck. The original paint is single stage. I sprayed primer, paint, and clear, my question is how do I blend the clear into the existing paint? Will blending spray eat away the single stage paint? That’s the part I’m having trouble with is blending the clear into the rest of the door

@GarageNoise Год назад

Ok, can I ask why you don't want to clear the complete door? I know it's additional work and materials but you'll get a much better repair that will last much longer. With that being said you can blend the clear to a solid color single stage paint. Your orig paint needs to be sanded with 1500 in the blend area and the buffed out after it's cured. If you have a metallic color wet sanding the single stage will remove paint and affect the appearance of the color. Your much better off blending color then clearing complete panel.

@rayheller8450 Год назад

@@GarageNoise I only repainted a part of it. Thinking about it, it will probably be a lot easier to just sand the door and clear the whole thing. I’m just worried that it will stick out from the rest of the truck being that the paint is single stage. The spot I did looks good the paint blends in but I had a little bit of trouble with the clear, some of it blended and some of it had to hard of a line. Mind you I have the slightest clue when it comes to painting. My truck started to peel and the dealership won’t fix it. I figured it would be an easy fix, boy was I mistaken. I’m going to try and blend it but if it doesn’t work then I’m going to clear the whole thing

@rayheller8450 Год назад

@@GarageNoise and it’s the Toyota super white paint. Super thin. I sanded down one of the clear coat lines with 2000 grit and I started taking paint off the original side.

@tobbyodukwe5690 Год назад

I think this is fastest way to repair than painting the whole panel

@GarageNoise Год назад

Yes, but not the best way. Appreciate the comment and support brother!

@arminnouri4235 Год назад

how long do these touch up paints last? (Will they flake?)

@GarageNoise Год назад

No they won't flake but what happens is the sun starts to damage the blend and eventually you'll see the blend line it's not terribly bad but just not perfect.

@rcarioca Год назад

i am curious about how the blend of basecoat occurs. Won't the new atomized basecoat boundary still be visible of the left because of difference in color and faint overspray etc. ? I understand that color blending with clear coat is less of an issue and sanding afterwards will improve the blend of clear.

@GarageNoise Год назад

The basecoat blen is less likely to be visible than the clear blend as lon as the color is a close enough color match.

@rcarioca Год назад

@@GarageNoise I will have to try it next time. I wonder why they don''t make or use a blending solvent for basecoat like they have for clearcoat.

@GarageNoise Год назад

@@rcarioca check out my videos on wet bed, clear basecoat that is what is typically used for blending difficult basecoat like silvers or other metallics.