Blower Motor and Blower Resistor Replacement 04 Ford Ranger

Подписаться 66 тыс.

Просмотров 61 тыс.

50% 1

In this video I'll show how to replace the blower motor and blower resistor on an 04 Ford Ranger 3.0L. The process is rather simple and getting the motor and resistor replaced is very easy once room is made to replace them. By simply removing the air filter housing, positioning the cruise control unit out of the way, and moving the coolant reservoir and washer reservoir forward a bit the room needed to replace the blower and resistor is easily created. Once room is made simply disconnect said parts, unbolt them and replace them. The processes involve in replacing said parts is similar to other model year Ford Rangers. (Similar not the same and care should be taken to recognize the differences. This is where a manual will help.)
Note: It is suggested to perform this repair with the engine off and completely cooled.
DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbours Auto Help, Barbours Auto Help makes no guaranty that by the use of the information given in this video a quality repair will be made. Barbour'sAutoHelp makes no guaranty that the information provided is totally complete, syncronized and accurate. Verify everything using an appropriate repair manual. Follow the repair manual over this videos content. You can do it. Do it right and do it safely.

Авто/Мото

Опубликовано:

2 апр 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 83

@dzynr64 2 года назад

In depth instructions... I love it! Telling me which way to pull, which size sockets, etc. I wish all DIY videos were like this.

@EddyGF800 2 месяца назад

Great job showing everything and covering the size of each nut or bolt. Top notch in every way.

@edwardfancon9521 4 года назад

great video. Too many videos skip steps. I only needed the info on the airbox, but it saved me some frustration since I couldn't see what held it in place. I was afraid to horse on it till I saw this video. I am jealous though, yours came off way easier than mine. lol Thanks.

@johnm5893 2 года назад

Great professional job. Wish all videos were this detailed showing all the steps and hardware sizes. The small details on electrical connections also is very informative.

@topherl1446 4 года назад

This is one of the nicest videos I have ever seen pictures were excellent description was excellent I was having trouble getting my airbox out was stuck in the bottom grommets so hard I thought it was bolted I was able to work at Lulu's with a screwdriver through the bottom of the air box a little bit of silicone spray lube down into the grommets made it slide out nicely it was really stuck in those grommets on the bottom thought I was going to break the air box in half so thank you for your description of the whole project and not just putting it back in you sure have a definite talent for teaching thank you very much

@BarboursAutoHelp 4 года назад

Thank you so much. That's a wonderful compliment. I'm glad to be helping.

@slowpoke4557 3 года назад

THANK YOU SO MUCH FOR THIS!!! I bought a new motor for my 05 ranger at auto zone ($45) and decided to get the resistor too ($20). The one thing your video did not show, as you said you got yours at a junk yard, was swapping the fan out.... Pry the retaining clip off and save it if new motor did not come with one. A little bit of lubricant on the shaft, hold the fan (helper may be needed) & tap on the end of the shaft with a hammer. Carefully remove foam gasket and place on new motor (i had to glue mine in place) & make sure holes line up. Install fan on motor and secure in place with the retaining clip. I hope that helps anyone that got confused at this point as I had to call up parts store to find that part out. Great video and you helped me out immensely with it!

@Jstroke615 Год назад

You are a master teacher. Well done.

@SamuelNealey Месяц назад

Just did this on my 05 ranger, hardest part was taking off and putting back on the air filter housing. Almost felt like i was gonna break it pulling it up was stuck very tight. But i got it done, thanks for the help.

@BarboursAutoHelp Месяц назад

Glad it helped

@jakehoss1 4 года назад

Dude. Thank you so much for this video. I know basically nothing about working on cars. This helped me do this swap out in like 45 minutes. I appreciate it very much. Keep up the great work!!!!

@BarboursAutoHelp 4 года назад

Right on! Glad it helped.

@brucelovett44 4 года назад

Great straight forward video, you make it look so easy! THANK YOU for sharing the size of each bolt, will definately be a time saver when I replace mine!

@oscarluna7775 2 года назад

This guy explains everything excellently 👍

@hmelj2736 4 года назад

I have an '04 and need to do this job. Couldnt ask for a better, more precise video. Hell, you practically did the job for me.

@BarboursAutoHelp 4 года назад

Right on.

@xlargetophat 7 месяцев назад

I'm gonna do this on 04 2.3 ranger

@pl747 Год назад

There is a screen back in the blower housing you can get to while the blower is out. They are bad about getting clogged up and restricting air flow out of the vents. I duct taped a piece of 1/2" cpvc pipe about 16 inches long into the end of a 1 gallon shop vac. Spray the screen liberally with a soap/water solution from a jet spray bottle. It will clean much better being wet. And vacuum it out. Shine a good light in to inspect it. This screen can also be vacuumed from the inside if you open the glove box and release the latches on the side and let it hang straight down. Put the air conditioner on Max Air and the door will open where you can see the screen. Kill the engine and clean the screen. I do this about once a year. That screen will get very clogged sometimes. I have an 07 and an 09 model and they both have the screen.

@davemessink6410 Год назад

Great video. I was in no hurry, but with these instructions I was done in less than an hour. Thank you.

@alexbrocklebank8821 Год назад

Thank you so much!! I was able to replace my blower motor resistor watching your video!

@TheStevedie Год назад

Awesome video. I retired my 04 manual as my daily driver in 2017. It has 330k miles on it and still starts right up and sounds great, minus the lack of exhaust since it was so rotted for 4 years. Since I just replaced the exhaust and completely redid the front brakes...brake lines suck...It's time to tackle the rattling noise and lack of different speeds in the blower. It functions but its annoying and if i can get it done cheaply I'll do it.

@JustinFeralMcWhirter 7 месяцев назад

Very well done video. Thank you for the detailed instructions. You've hit the perfect balance between having all the details and not having too much fluff. I can tell you spent some effort editing the video and it shows. Great work!

@BarboursAutoHelp 7 месяцев назад

Thank you!

@user-rc6ku5tv2t 11 месяцев назад

Mega thanks, hope my resister is not bad with the blower motor working 😂

@thedubbman4453 Год назад

Man you make this look soo easy and I'm a woosy to try by myself

@BarboursAutoHelp Год назад

Whether You Think You Can, or Think You Can't ... You're Right -Mr. Blue Oval

@user-vu3ds5kj1g Год назад

Very thorough. Thank you. I use a product called DeoxIT D5 to clean electrical connections. It works great. Just follow the directions on the spray can.

@WhisperGentleman 2 года назад

Just got done with my blower and resistor, this video helped me out a lot

@bigrywhat 3 года назад

Really good explanation. Dumbed it down properly for us newbs. Thank you.

@BarboursAutoHelp 3 года назад

Glad it was helpful!

@bigrywhat 3 года назад

@@BarboursAutoHelp don’t forget the fuse in the cab though. That’s what our problem was. All that other stuff needed replaced anyway.

@jaradmondelblatt6559 Год назад

Thanks so much , made it so much easier for me to do this at home and save some $$$

@BarboursAutoHelp Год назад

Glad I could help

@MegaGQ1234 4 месяца назад

Good job bodies .thank you for sharing with us .god bless American and all Americans like you hooh sharing his gift from god with people that he don't know 🙏🙏🙏

@BarboursAutoHelp 4 месяца назад

No problem

@brucebrooks9462 3 года назад

Thank you for the video. Very helpful.

@byronhernandez8741 6 месяцев назад

Super detailed and informative. Thanks!!

@BarboursAutoHelp 6 месяцев назад

Glad it was helpful!

@TheJosh40601 4 года назад

Great video and easy to follow 🍻

@josephmirowski371 2 года назад

Excellent instructions, one tip if you can't get your air intake reservoir off spray a little lubricant into the grommet holes in the bottom works like a charm. the holes lead right to the rubber grommets.

@BarboursAutoHelp 2 года назад

Thanks for the info!

@davidv.3135 Год назад

Thanks! That helped alot!

@sigururbjornsson2991 2 года назад

Great video, thank you very much !

@Mikey34549 Год назад

Thanks 👍. I am about to try this on my truck.

@BarboursAutoHelp Год назад

Good luck!

@BAND-MAID-USA 4 года назад

Perfect video. Thank you.

@BarboursAutoHelp 4 года назад

Thanks

@rdollison37 4 года назад

Thanks so much. You saved me $100 bucks.

@BarboursAutoHelp 4 года назад

There it is! You made it worth the time and effort. Thanks for sharing.

@Rebelutionman123 6 месяцев назад

Searched and searched and searched for a concise, well shot, well lit, informed video and THIS WAS IT! Thank you, about to change mine and I feel confident!

@WhisperGentleman 2 года назад

Now I can call myself a RU-vid mechanic 😁

@jamesgoforth1606 Год назад

Nice job. 5 out of 5 stars.

@BarboursAutoHelp Год назад

Thanks!!

@bryanway9946 Год назад

Question. How hard is it to remove just the resistor? And do you possibly have a video for that?

@sigururbjornsson2991 2 года назад

Great thanks to you, brilliant video.

@BarboursAutoHelp 2 года назад

Glad you enjoyed it

@robw3027 3 года назад

Good video- thanks.

@BarboursAutoHelp 3 года назад

Glad you liked it!

@warrenjappe8637 3 года назад

Yes it was very helpful, one thing after the fact, the resistors on the old pack is mounted on fiberglass it seems, after examining it later I found tiny hairs of glass in my finger, beware! Try not to handle it with bare fingers

@kountzer 4 года назад

That is a lot easier than working on a blower motor in a 2007 Malibu.

@suziesainnawap9396 5 месяцев назад

I couldn't remove the whole air filter housing unit, did u have to do pull harder? Or is there a clip somewhere?

@MrAcuta73 3 года назад

Helpful video, thanks! Mine works perfectly fine, except I somehow got something stuck inside there and it buzzes like crazy, driving me nuts. Just need to get into the housing and pull out whatever debris found its way in. LOL

@BarboursAutoHelp 3 года назад

That can be annoying

@bugsgaming1148 2 года назад

I CANNOT get the bottom part of my air filter box out..it'd a 2001 4.0 ranger 2wd Is thr any difference or do I need to jus keep pulling?? Any advice would be really helpful thx!

@BarboursAutoHelp 2 года назад

Not sure how to help on this one. Maybe use penetrating oil. Are you sure there aren't any bolts holding it?

@7040slim Год назад

Very very interesting easier for me

@BarboursAutoHelp Год назад

Glad to hear that

@mannyalcala7270 2 года назад

Hello I have a question the Mine when I'm driving it turns off and the a / c turns on will be the blower resistor ?? Ford ranger 2004 4.0l

@Magpie01 9 месяцев назад

I was able to wiggle mine out without removing the washer fluid reservoir on a 2009. Tilt it down on the front and it will pop out at the top of the opening.

@BarboursAutoHelp 9 месяцев назад

Awesome!

@almirnavarro6912 3 года назад

Please help with hoses that connect the air condition of my ford ranger 2009 from the outside going inside the cabin.

@BarboursAutoHelp 3 года назад

Ok. How?

@maicodoug 2 года назад

Great video, however there is NO need to remove such a large "billable" amount of hours and equipment from the fender. The squirrel cage blower wheel will distort enough to fit into the housing. Simply align the clock rotation (as if the thing would fit in the first place) and at the top position (12 O'clock), with the bottom facing to the rear as much as possible, tip the wheel forward and exactly at the top notice that the wheel is only a quarter inch away from slipping home. Take your time. Then when the closest point, just compress the top of the wheel down, and the old unit slips right out, and the new one slips right in. Even the original unit had NO damage after removal. I had to work harder removing the electrical connectors. 4x8mm & 1x 10mm. Use a 1/4" drive for the 8mm fasteners.

@BarboursAutoHelp 2 года назад

However you want to do it.

@albinsegura7593 2 года назад

HOW DO I REPLACE THE BLOWER MOTOR BOX

@TheRubberduckkkk 4 года назад

How long do you think this would take you if you were not doing the video ?

@BarboursAutoHelp 4 года назад

10 minutes. I think the book calls for 30.

@JoseMaDuran-ci3er Год назад

Al 7:50' que cochi, de perdida un trapazo antes de ponerlo.

@deivispari1179 3 года назад

Hello, I am writing to you from Peru. I would like to be able to ask you some more detailed questions By what means can I contact you? thank you

@BarboursAutoHelp 3 года назад

Well, right here works for most viewers. What questions do you have?

@deivispari1179 3 года назад

@@BarboursAutoHelp Here in Peru I can't find spare parts and I want to buy because my truck arrived damaged. my question is if you can support me with the purchase and send it here to peru

@BarboursAutoHelp 3 года назад

No, I would not be able to do that. Sorry about that.

@dkupy100 3 года назад

Just got around to replacing the motor on my 02 ranger. I had to really manhandle that airbox to get it off AND on. and yes I did lose one of the motor screws as it fell into nether region under the motor.. My replacement fan did not come with a gasket so I gingerly took the old gasket off without tearing and used 4 small dabs of super glue to hold it on the new motor frame at the screw holes. Thanks for your help.