Blower Motor & Resistor Replacement 06 Ford Focus 

Thanks , showed this to my son and he was able to replace the blower resistance, Problem solved. 4/28/24. BEFORE: vent was only blowing air when I turn the knob on the highest level

You have an art of showing people how to do things.

I recharged my AC, and it would blow cold for a minute but get warm soon after. I had a feeling it was the motor or the resistor. This video helped so much, thank you!

Thanks! I got them in and it worked. The resister was pretty easy. The hardest part was putting the new blower back in...the screw holes were too tight to hand start the screws. Holding the blower up with one hand and ratcheting the screws in with the other was tough...ended up having my son hold the blower up while I put in the screws.

Awesome! Thanks for being so thorough...even down to the size of the wrench one needs.

Excellent video tutorial with easy to follow instructions. Thank you so much! You helped me fix my heat without an obnoxious garage bill. No more freezing on my way to work. It's working fantastic now! 😊

Loved this video I order the two parts getting it done next week. You save me a trip to garage shop and money! Thank you😊

I guarantee that car does not have one standard bolt or nut on it. 5/16" is the same as 8mm fortunately. Thanks for the straight to the point video. Just what I needed.

Short video, right to the point. Took me 6:52 to watch the and about a 1/2 hr to install. Thank you so much!

I had to replace the blower motor on some other vehicles. The Focus looks VASTLY easier. I've found most repairs on Foci to be pretty easy, with the exception of alternator replacement.

Don't let Amazon sell you the wrong size wiper blades with the it fits your fill in the blank. Just spreading the word. Great video.

Sir I would like to thank you very much I have not fixed mine yet but it seems pretty simple and I'm ordering my parts today and if I can I'll get back with you and let you know how it all works but it appears to be easier than I thought it would thank you very much

excellent tutorial clear and concise. I Wish that I had found this before tackling my own 2003 Focus heater fan issue yesterday. I guess we often use different words to describe the same thing either side of the pond. I went looking for 'non working heater fan ' so your video didn't show up for me. Terrific editing by the way.

Thanks boss...done in less than an hour.

Excellent video! Thank you for taking time to explain the swap. Very well-edited too, by the way!

now replace the blend box! :op

Mine has started nasty screeching. Was in the trade many years but 77 years old now but will attempt this if it is that easy. Hope RHD is the same procedure !

Great video, Ron. Thank you!

Thanks for the video. Made changing my blower and resistor very easy. The only thing you forgot to mention was the contorting I had to do to get the blower back in lol.

You are the best👊👍

Thanks for the video. But my question is How do you if your blown motor is bad ? Thanks

Thanks for the video!!!

Thank-you so much....very helpful.

Super ! Merci l ami 😊

How did you hold the new blower motor up while trying to get the screws into the holes at the same time in that tiny space under the dash?

How do I know it isn’t the blower motor switch that has failed? When I turn the a/c fan controller it feels “ disconnected” , just turns with no feeling of connection. It does however cause the little light to come in indication that the a/c has been activated.

Before I start buying parts my 2011 Focus SE is blowing on 1,2,3,4 but not cool as well but on Max it's cold. Freon was added and good but before that it was lasting 2-3 weeks? Trouble shooting and a video showed pressure switch? Trying to save money as I only get paid monthly VA check. Thanks for your video 👍🏼

Great video, very well done!

Great video 👍

Great video! Thanks

Ron, my blower stopped working completely at all speeds. I had it on setting 3 and was blowing fine then just stopped. (2007 SE)The fuse is good. Is this the blower motor or something else? Selector switch?

Hi Ron. I have a 2006 which works on setting 3 and 4 but not on 1 and 2. Is this likely to be a resistor pack/ or as someone else said it might be the switch on the dash. Can the resistor pack work with just 3 and 4? will the resistor pack break as a whole or can it just stop working on 1 and 2? Really pleased with the car as a whole.

is it a good idea to remove neg battery cable or not necessary?

Sir, you quickly skipped over the hardest part of the removal of the resistor process by pretending you hadn't already pushed the resistor tab in to free the resistor. Instead, you just pulled the harness connector straight out saying, "Pull the connector on there..." at time 3:09. Not too swift. I'm sure you had a hard time getting at that tab that holds the resistor harness in place, otherwise you would have shown that step in detail. For those who are going to replace their resistor, keep in mind it might be best to remove the entire resistor BEFORE you pull the harness out of its slot. This will give you a better grip on the resistor with both hands instead of doing it with only one hand. The tab is pushed IN to release the resistor, not pulled out. If your Focus has a hex-head screw instead of a Phillips screw holding the resistor in place, use an 8mm socket. A 5/16 socket may work as well. Also, you did a Cluster Phuck of removing the Air Deflector. Had you tilted the deflector up from its horizontal position to a vertical position, it would have slid right down and out. Didn't you view any RU-vid videos before making yours? Good luck to you.

Ron the blower turns on at 10 percent power for 30 seconds then stops working.does the blower need replacing? thanks chris

Rock Auto and eBay are both cheaper than Amazon today. And Amazon is doing horrible damage to our economy anyway, so bonus being able to stick it to 'em.

How much money did you pay for the other piece with the blower motor

Thats focus mk1?

Do you get a chirping sound, when the blower motor plays up?' I've got a 2006 ford focus estate and the Aircon makes a chirping cricket sound when it's on..wondered if the motor has gone faulty

I have same problem with ford focus station wagon 2010...But I cant find the fan under that lock...do anybody know where its locatied?

5/16 inch bolt or 10mm if you are not homo americanus :P why you people use imperial system in XXI century!? aaanyway good tutorial hope it will help me replacing my fan in european version of focus MK II :)

does this work for an 09 focus?