Тёмный

BMW E36 Automatic Transmission Removal for (automatic to manual swap) BMW 318i 320i 325i 328i m3 

Problem Solver Garage
Подписаться 38 тыс.
Просмотров 18 тыс.
50% 1

Step-by-step automatic transmission Removal. Manual swap BMW E36
BMW E36 Automatic Transmission Removal for (automatic to manual swap) BMW 318i 320i 325i 328i m3
Here’s a link to the starter removal Video-👉 • BMW E36 325i 328i m3 (... ✅
Here Is a link to the automatic to manual transmission swap videos in a row👉 • BMW E36 manual swap, a... ✅
Here is a link to all the BMW E 36 videos, Complete Restoration Series all episodes 👉 • BMW E36 Restoration, E... ✅
Automatic transmission removal👉 • BMW E36 Automatic Tran... ✅
Manual transmission Removal👉 • BMW E36 Manual transmi... ✅
BMW E 36 starter removal video👉 • BMW E36 325i 328i m3 (... ✅
BMW e36 manual swap parts list video👉 • BMW E36 parts you need... ✅
Clutch pedal, clutch master cylinder slave cylinder installation video👉 • BMW E36 Manual swap cl... ✅
Manual shifter installation👉 • BMW E36 (shifter Insta... ✅
Fly wheel, pressure plate, clutch disk installation video 👉 • BMW E36 Fly wheel, Pre... ✅
Manual transmission installation video👉 • BMW E36 manual transmi... ✅
BMW E 36 intake manifold installation episode👉
• BMW E36 intake manifol... ✅
manual swap. Automatic transmission computer chip removal video👉 • BMW E36 ( Manual swap ... ✅
Reverse lights and safety neutral switch manual swap video 👉 • BMW E36 manual swap, s... ✅
Instrument cluster lightbulb removal video, for auto transmission light👉 • BMW E36 Instrument clu... ✅
#BmwE36
#BmwE36ManualTransmissionSwap

Авто/Мото

Опубликовано:

 

1 дек 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 75   
@tristanstump1605
@tristanstump1605 2 года назад
Dude you have no idea how helpful these are … much appreciated!
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
Nice, I’m happy to finally start getting some feedback on these videos
@premiumxperiments6059
@premiumxperiments6059 Год назад
You know what i love the most. I once saw your videos and told myself soon ill do the same. Well, i am now looking at them again because I am halfway started on my m52b28 auto to zf 5speed swap. Thank you man for all the helpful info!!!
@ryandelgado6496
@ryandelgado6496 2 года назад
Finally going to get around to swapping my 325i thanks to you! Keep it up
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
I literally just finished it today, all the videos coming out soon
@timboyle3114
@timboyle3114 2 года назад
Awesome vid - thanks. Not doing a swap just yet - but need to get to the front of the trani to fix a leak on my 325 - a lot of great e46 stuff but this is the best e36 I have seen.
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
Thx 🙏🏻
@MUFY-THE-CAT
@MUFY-THE-CAT Год назад
I respect all the effort showing every detail.
@ProblemSolverGarage
@ProblemSolverGarage Год назад
Thanks
@Icepressa
@Icepressa Год назад
Awesome video im putting up the manual now but I don’t see anything about the driveshaft installation that You maybe have missed! But thats not a big deal! Thanks alot For the series, im from ontario aswell 💯
@macmroz
@macmroz 2 года назад
Nieźle ci idzie. Komentarz dla zwiększenia zasięgu. Go on!
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
Dzienki
@ReddyReg
@ReddyReg 2 года назад
Amazing! Keep em coming🔥🔥🔥🔥
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
Thx
@konstantinspopovs5672
@konstantinspopovs5672 2 года назад
keep up the good work! waiting for wiring
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
Thx , will do
@jefersonsilva2606
@jefersonsilva2606 2 года назад
Bom trabalho esse câmbio automático é muito pesado!
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
?
@projectmerlin
@projectmerlin 2 года назад
Superb work! Your E36 vids are the best I've seen and are a great inspiration. I've just watched your full length vid on pulling out the manual box before watching this one - awesome stuff! I'm doing lots of DIY work on my 2.5 6 cylinder auto vert at the moment, and I'm in the middle of a coolant rebuild. I've already replaced the w/p, t/stat & housing, clutch fan and belts. Radiator is next on the list, and now thanks to this vid, I can clearly see those awkward little 8mm bolts on the trans/lines attached to the underside of the radiator. I managed to take out the easier one but the other bolt in between the lines is a bit tricky with everything in situ. Question for you if you don't mind: I'm struggling to get to the drain plug in the engine block for a full flush. Would doing a flush via the water pump opening be okay? I'm thinking about removing the w/p again, which is pretty much on the same level as the drain plug, and then spraying the garden hose (we're in a soft water area) into the hole to wash out old coolant.
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
Thanks for watching, not too sure about the coolant flush haven’t done that yet
@projectmerlin
@projectmerlin 2 года назад
@@ProblemSolverGarage No probs. I'll give it a go and see if it adequately works. 👍
@user-cs5ni5cx4f
@user-cs5ni5cx4f 11 месяцев назад
What wood or any other stands would you recommend for this? I have a 94 325i
@ciros5572
@ciros5572 4 месяца назад
is it the same for a e46 328i?
@RockNinjaa
@RockNinjaa Год назад
I’m working on the top bell housing’s bolt they just won’t break loose
@wayned702
@wayned702 2 года назад
Hi i think your videos are great Im a DIY mechanic I have a 69 Corvette do you have a full video on a Holley Sniper EFI conversion from start to finish with an intank efi pump and wiring?? I would love to see that
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
Hey thanks for watching, unfortunately I do not
@danieltegas7261
@danieltegas7261 Год назад
Awesome skills
@ProblemSolverGarage
@ProblemSolverGarage Год назад
Thanks and thanks for watching
@I_am_kenneth
@I_am_kenneth Месяц назад
Help I just noticed the socket underneath next to the gearbox mine is disconnect what is it for I don't see the other wire to connect to it
@justinmorella9683
@justinmorella9683 Год назад
what’s the point in taking off the starter?
@zyiink
@zyiink 8 месяцев назад
Why do you need to remove the starter motor? Can you just use that for the manual transmission
@Inweezy
@Inweezy Год назад
Hi i was wondering what do you do with the extra wiring that was connected to the auto transmission, did you just tuck it, or do you cut it? Thanks!
@ProblemSolverGarage
@ProblemSolverGarage Год назад
I just talk to the way at the motor
@mastermixprosound
@mastermixprosound Год назад
Hi I have watched your BMW E36 Transformation from Star to the End ! Congrats and Thanks ...I Have a Question ... Will a Getrag Manual E36 BMW fit in to my BMW E36 328I CONVERTIBLE ?
@ProblemSolverGarage
@ProblemSolverGarage Год назад
Thanks for watching, yes they're all interchangeable
@TheTONEYSHON
@TheTONEYSHON 2 года назад
good stuff :)
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
Thx
@DrRolls-tf1vb
@DrRolls-tf1vb 2 года назад
What’s the name of the wrench you used to take the hoses out I can’t find it in the description
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
Hey sorry I can’t remember what they’re called but they sell them at Napa, you could show them a picture of it from the video
@snapbackdad
@snapbackdad 2 года назад
Really really helpful I watched every video, any chance you’re selling any parts?
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
Thx, I’m so so far north for parts lol
@WhoIzKai
@WhoIzKai Год назад
My tourer converter stayed with the engine do I just hammer it off?
@WhoIzKai
@WhoIzKai Год назад
Swapping to a zf
@nicka.8993
@nicka.8993 2 года назад
hey man what did you do with the automatic transmission wiring connection?
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
I just wrapped it into a ball and left it over by the front left fender
@cya3651
@cya3651 2 года назад
Hello, i am in the process of doing a manual swap. How do you prevent the driveshaft from spinning in order to remove/loosen the nuts at the diff? Should i just lower the car so the wheels are resting on the ramp so it won't spin? and then loosen the nuts/bolt? I don't want to damage the diff if i should hold the driveshaft a certain way to prevent it from spinning. Thanks.
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
That’s exactly what you need to do
@cya3651
@cya3651 2 года назад
@@ProblemSolverGarage Thank you for your quick response as always. Your videos are super helpful and very clear n detailed… thanks again🤗
@elisguerra2491
@elisguerra2491 2 года назад
So what we do with the cables that we disconnected from the transmission?
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
I zipped mine up with zip ties and left them tucked away nicely under the left front fender area
@tbagindustries4331
@tbagindustries4331 Год назад
That round black electrical plug you twist out of the rear of the box, what do I do with that? Cut off and close the wires off?
@ProblemSolverGarage
@ProblemSolverGarage Год назад
I just unclipped mine everywhere and wrapped it up into a ball and put it next to the cruise control
@tbagindustries4331
@tbagindustries4331 Год назад
@@ProblemSolverGarage thanks mate 👍👍
@buyabriangeorgekanyama9647
@buyabriangeorgekanyama9647 5 месяцев назад
Hi. Can i use 318i manual gearbox to 325i engine.
@ProblemSolverGarage
@ProblemSolverGarage 5 месяцев назад
Yes they're all interchangeable, you'll need to use a 318i clutch and pressure plate
@saucyboironni2820
@saucyboironni2820 10 месяцев назад
I have a 93’ 325is do I need to take part the manifold in order to take out the automatic transmission?
@ProblemSolverGarage
@ProblemSolverGarage 10 месяцев назад
Yes and the windshield wiper assembly, just liking my videos
@saucyboironni2820
@saucyboironni2820 10 месяцев назад
@@ProblemSolverGarage is it possible to contact you somewhere else?
@saucyboironni2820
@saucyboironni2820 10 месяцев назад
@@ProblemSolverGarage I have so many questions but I can’t put it all in just RU-vid comments. Do you have Instagram or Facebook?
@ssalbach
@ssalbach 3 дня назад
>How do you lift the car high enough= Do you have a video from this lift process?
@ProblemSolverGarage
@ProblemSolverGarage 2 дня назад
Watch the whole series on the manual swap, everything start to finish is in the video
@mrwarmonga
@mrwarmonga Год назад
Is it a getrag trans you gonna be using or a ZF?
@ProblemSolverGarage
@ProblemSolverGarage Год назад
I don’t know. What’s the difference?
@mrwarmonga
@mrwarmonga Год назад
@@ProblemSolverGarage I guess the zf is better and the drive shaft is different
@ProblemSolverGarage
@ProblemSolverGarage Год назад
@@mrwarmonga I guess I have no idea, my BMW is a 97 the transmission came out of a 98, same motor 2.8 L. Lots of people read these comments so if you have any information feel free to add, I think they both fit
@cya3651
@cya3651 2 года назад
Help.. does anyone know? If my automatic transmission delays to shift gears from 1st to 2nd under hard acceleration at 6000 RPM, is that a bad torque converter? The engine revs for 1 or 2 second delay then shifts to 2nd gear causing a jerk and tire spin at times due to the hard shift. Thank you in advance
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
Sorry not too sure sounds like you have a transmission problem
@cya3651
@cya3651 2 года назад
@@ProblemSolverGarage thanks
@nedunonnyp704
@nedunonnyp704 10 месяцев назад
Just getting into these Classic BMW M Cars and Just Wondering in Disappointment Why These 6 Cyl Engines From Like Late 80's and 90's Were able to make Over 300HP (From a NA Straight 6!) 340HP From 3.2L for example, (Albeit Euro Versions). But seems like no one Can even Achieve the same Performance from today's 6Cyl's Engines W/O some kind of Forced induction Even with all Our Advanced and Modern technologies!.. I know the Major issues back then was putting all that Power to the ground efficiently with the technology available then.. So that got Me wondering, If that 3.2L engine really Made 340HP (Which is still a lot of Power in My Opinion even in todays standards) that got Me wondering. Since Modern Automatic Transmissions are Almost As good And Arguably Shifts Better than Manuals, Is it possible to Mate say that High Output 340HP NA Straight 6 engine to a Modern 6, 7, or 8 speed Automatic Transmission? I know it sounds wild, but Wondering if it's ever been done or if its even possible... ???
@eetmahbykechorts5925
@eetmahbykechorts5925 Год назад
The back of my drive shaft goes through a cross memeber
@treyezra
@treyezra Год назад
Really wish you didn’t skip so much stuff
@ProblemSolverGarage
@ProblemSolverGarage Год назад
What do you mean? I skipped nothing. Watch all the videos in a row.
@dcotai2902
@dcotai2902 2 года назад
...so much more... Plastic parts in the e46... Don't buy... Ever..
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
I like the look of the E 36 more
@ProblemSolverGarage
@ProblemSolverGarage 2 года назад
More classic box look
Далее
Daltonik qiz (QVZ 2024)
00:53
Просмотров 194 тыс.
How Much it Cost to Manual Swap My E36 + Parts List
10:04
I made Off-Road Gokart / Buggy / Crosskart 500 cc
46:25
USB E36 OEM+ Install WAY TOO CLEAN!!!
5:46
Просмотров 41 тыс.
The Basics of Manual Swapping - Rare JDM E36
23:40
Просмотров 14 тыс.