Тёмный

BMW e46 Maxpeedingrods Coilovers Knocking Fix! 

Ryan & Nat's Garage
Подписаться 22
Просмотров 11 тыс.
50% 1

Knock Knock! Who's there. Ryan with a FIX!
In this video I will go through fixing the knocking noise from Maxpeedingrods coilovers on my BMW e46.
Enjoy.
#BMW #e46 #coilovers #Maxpeedingrods #Fix #Suspension #knocking

Опубликовано:

 

6 июн 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 27   
@mrmalavey1098
@mrmalavey1098 2 года назад
I didn't bother taking mine out, I just undid the bottom of the coil from the hub and shoved some greese in the top and bottom and wiggled the coil in a circular motion, been on like 2 years now and still fine, also don't forget the rears and tighten the top nuts on 1st install unless ya want ya car to sound like cooking popcorn when driving ✌️
@ep91monster
@ep91monster 3 года назад
That will only last a while before it gets noisy again. On the underside of that pillowball mount, theres 2 dimples securing the pillowball in. Undo that, then you can actually pack it with grease inside properly rather than just smearing it around the outside
@williampersson3961
@williampersson3961 2 года назад
Great video! Have been trying to figure what the knocking sound was and just found this video, so im gonna give it a try!
@rjuarez3b
@rjuarez3b 3 года назад
Nice vid, best Knock knock how too by far
@ryannatsgarage7590
@ryannatsgarage7590 3 года назад
Thank you 😊
@pitbullbite5835
@pitbullbite5835 2 года назад
Thx brother... Just got some for my E60 and I'll prep them same way before installing. Many thanks!!
@TheSonyjoseph
@TheSonyjoseph 2 года назад
Hi, have u tried it on ur e60? Just got full set for around £200 on ebay. How r they ? Thanks
@MRMAN-wb1tv
@MRMAN-wb1tv 2 года назад
*Everyone has this problem with PILLOWBALL SPHERICAL MOUNTS. People fail to realize it's a metal on metal joint that's not meant for everyday driving*
@Ayixlia
@Ayixlia 2 года назад
I fixed mines. To fix it try adjusting the part wherre you endlinks meet make sure tjey are symetrical on both sides woth tje front end off the ground. Also het adjustable endlinks
@androbrown9369
@androbrown9369 Год назад
What's better for a comfy drive more preload and soften the damper or the opposite?
@psychoticrob9464
@psychoticrob9464 Год назад
how much preload did you put back on the spring
@christophermackie1175
@christophermackie1175 2 года назад
Hi mate, just wanted to know if the standard droplinks fit fine?
@RyanSmith-zn2xx
@RyanSmith-zn2xx 2 года назад
Yes mine did dude.
@Ogfunkymonkey
@Ogfunkymonkey 2 года назад
Hey I have a question maybe you could answer. I just got the bc racing Br coilovers and I’m having some clicking on drive front side. I’m going to try the grease thing, but my coilover is actually getting lower on its own? Any idea what I messes up, or reason this is happening?
@ryannatsgarage7590
@ryannatsgarage7590 2 года назад
Coilovers or springs will settle over time. BC racing are some expensive coilovers. I would contact them if the greasing doesn't work.
@oestribi14
@oestribi14 2 года назад
Hi, on your opinión, do you recomend to install this coilovers on e39 540i?
@ryannatsgarage7590
@ryannatsgarage7590 2 года назад
If maxpeedingrods do some for your vehicle and you are on a budget. Yes!
@robingonzalez491
@robingonzalez491 3 года назад
I installed the same coilovers on my e46 but ive seen people put the rear spring perches on the top of the spring and on the bottom. Do you know which is best?
@ryannatsgarage7590
@ryannatsgarage7590 3 года назад
Hi, thanks for the comment. I put them on the bottom as they have bolt which goes through the hole to secure them in place. Hope this helps.
@robingonzalez491
@robingonzalez491 3 года назад
@@ryannatsgarage7590 thank you so much for the response i just have another question, did you have any problems with the nuts of rear struts towers loosening after a couple drives?
@ryannatsgarage7590
@ryannatsgarage7590 3 года назад
I did actually. Got a really loud rattling sound. What I did was just tighten them really really tight. As tight as I could. It's been 3 months and they haven't come loose.
@ryannatsgarage7590
@ryannatsgarage7590 3 года назад
Oh you meant the struts sorry. No I didn't. Not since I installed them
@kil-0976
@kil-0976 2 месяца назад
i tried this method, the clunk went away for a few days then return again fak
@richardosborne7641
@richardosborne7641 2 года назад
Hey I have Fortune Auto coilovers and something similar is happening just on the front right side when I get close to full lock I will hear pop pop really loud sounds almost just like your video, I was wondering did that noise happen straight out of the box or did it start having an after a while
@ryannatsgarage7590
@ryannatsgarage7590 2 года назад
Hey buddy. It didn't happen straight away. Maybe 2 months? Just grease up the ball joints and you will be sound 👍
@charleybroad4613
@charleybroad4613 Год назад
Take them off. Suspension collapsed and wrote my car off. Pay a bit extra for better ones. It will be worth. Happens all the time with these
Далее
Best Coilover Preload Adjustment (MaXpeedingRods)
9:48
BMW E46 Suspension Common Problems & Overview
17:34
Просмотров 400 тыс.
УРА! Я КУПИЛ МЕЧТУ 😃
00:11
Просмотров 739 тыс.
3 Hours vs. 3 Years of Blender
17:44
Просмотров 4,3 млн
How to SUPER CLEAN your Engine Bay
21:58
Просмотров 50 млн
The Problem With These Headlights
17:55
Просмотров 894 тыс.
HOW TO TURBO AN E46! START TO FINISH IN 15MIN!
15:18
Просмотров 259 тыс.
Maxpeedingrod Coilovers knocking???!!
8:34
Просмотров 47 тыс.
$300 CHINESE PAINT BOOTH VS $30,000 NISSAN GTR
39:34
Просмотров 2,4 млн