Тёмный

BMW E60 Optic Fibre network problem. Fault finding and repair. 

LM Auto Repairs
Подписаться 100 тыс.
Просмотров 190 тыс.
50% 1

Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
Is not exactly a repair, but could well be.
This car come to me some time ago to install/code a CD Changer.
CD changer Coding
• BMW E60 CDC (CD change...
At the end I found that the optic fibre network was down.
In this video I take you through the process of finding where the problem was...
With the optic fibre network back on, the CD changer started working...
Is not a video with a lot of info, but hopefully will be able to help someone out there.
Hope you enjoy the video.
Any questions please put them below.
Like always, thank you for watching!

Авто/Мото

Опубликовано:

 

23 янв 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 279   
@espperre
@espperre 6 лет назад
Awesome. Very helpful and educational. I decided to remove the factory CD changer from my car because I never use it anymore and wanted to use that space for a new mod (airplay mirroring device). For an entire day I pulled my hair out trying to figure out why I had no audio anywhere in my car. No chimes, no seatbelt sound, BMW Assist SOS error, no power in armrest usb, no audio in the 3.5mm jack. It was crazy. I was convinced the mod I bought was faulty. So I’ve been searching online for hours when I should be sleeping and somehow I landed on this and your previous video. Now, it’s clear to me the optical network was broken by my removal of the CD changer. I’ll reconnect it first thing in the morning and I think that’ll fix my problem. And btw, it’s great that you didn’t edit these videos down. We got to see all the roadblocks you ran into and how you solved them and that in and of itself is education. Excellent job. THANK YOU! Subscribed.
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
espperre Thank you for watching... Hope you had a good sleep! 😉
@1bad335ii
@1bad335ii 3 года назад
Hey did you fix it ?
@espperre
@espperre 3 года назад
@@1bad335ii Yep! As soon as I reconnected my CD changer everything went back normal! It was instant and amazing. Couldn’t have done it without this video.
@litigious
@litigious Год назад
@@espperre Wait... so if you had to reconnect the old CD changer in order to fix the problem... how do you install a new radio in it's spot?
@espperre
@espperre Год назад
@@litigious It wasn’t a radio. It was something that was going to mirror my iPhone to my nav screen. Ended up going an entirely different and much better route with BimmerTech’s Vividscreen like this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GLNmcdRWvUc.html
@amadiurs
@amadiurs 2 года назад
Very helpful! You give me knowledge enough to repair my system!! Thanks you veeeery much man
@LMAutoRepairs
@LMAutoRepairs 2 года назад
😊 👍👍👍
@dashtyATG
@dashtyATG 3 года назад
Gangester well Done i really love all your videos.
@LMAutoRepairs
@LMAutoRepairs 3 года назад
Thanks! 👍👍👍
@billwallace4184
@billwallace4184 5 лет назад
Thank you for your time spent on repairing and showing us these BMW repairs.I own two E60's MY '05, and '06 Both have the adaptive sport pkg with the adaptive headlights, the rear light covers on both cars failed and let water in. I replaced one of AHL module with a new one drivers side only, rt side HL cover was still good. I tried swapping parts from car to car as the '05 lights were working fine. after putting them back on the '05 now they don't work either. adaptive part, lighting is fine. I have watched several vids on the FRM at the footwell. and how to see if the 50 count has been triggered due to a constant short. This could be my issue as well but I bought the BMW software off of Fleabay and seems to have all the different programs needed. My real problem is I have never coded before but it seems straight forward but is insanely hard to find two people that can give every step to get this job done, A manual is all I ask but we are the builders of the software manuals it seems. lol.. NCS expert, mine does not have the exact same options as yours shows, which confuses me until I can figure this out. I could definitely use some guidance on getting through the NCS Expert and others needed for VO/FA, VIN matching etc. After Watching your videos I can start to see a similar approach to solving these issues. The '05 car is getting a CDC I bought, I have the fiber connector I ordered, Just need to remove from jumper connector to the 2 way that plugs into the CDC connector. Then try what you did for the coding. I now am a subscriber and enjoying it.Thanks againWally
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
Hi I am on my phone at the moment, and is a bit more tricky to post links... but search on my videos.... I have a video where I show how to check and reset a short count on the reversing lights of an e90. I would guess that would be very similar on the e60... Obviously select different car and different light address... Have a look at it... it might help you... As for NCS Expert, I have many different profiles... but you just need 2 or so... Thank you for subscribe and watching my content.
@kennymccormick3914
@kennymccormick3914 5 лет назад
Ricky I have a bmw 545i e60 2005 can somebody explain to me why their isn't a fiber optic light coming from the mask unit
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
Hi Have you looked at right at the back of the unit? If the mask is not outputting light with the ignition on, then you might have an issue with the unit.... Thank you for watching!
@artursmihelsons415
@artursmihelsons415 Год назад
Thanks for explanation and great tips to the future! 👍
@LMAutoRepairs
@LMAutoRepairs Год назад
☺️ 👍👍👍
@dinoblue26
@dinoblue26 7 лет назад
Thank you. Very helpful.
@LMAutoRepairs
@LMAutoRepairs 7 лет назад
Dino Blue Hi Thank you for watching and for your comment!
@barianbarian6983
@barianbarian6983 4 года назад
Very helpful thank you sir appreciate it so much
@LMAutoRepairs
@LMAutoRepairs 4 года назад
Thanks! 👍👍👍
@ipeichev88
@ipeichev88 7 лет назад
Very useful!
@LMAutoRepairs
@LMAutoRepairs 7 лет назад
Thank you!
@madhavagrawal8356
@madhavagrawal8356 4 года назад
First of all a big thank you, i was troubled by ccc gateway problem on my E60 and i checked out your video and bang on, the detailed precision with which you go about your video is simply masterclass. You have a very comprehensive approach, love your videos.
@LMAutoRepairs
@LMAutoRepairs 4 года назад
Hi 😊 It is comments like yours that make to worth all the time I spend making this videos, and obviously the fact that indeed help people out there! Thank you for watching and for your comment! 👍👍👍
@juanrmedina5188
@juanrmedina5188 5 лет назад
Hi, thanks for sharing the video I do have one question, I have an 2004 E60 it's a 545i, sometime ago the screen on the navigation system turns off and on only showing the BMW logo and it sounds like it keeps rebooting so the radio does not work or navigation or anything. Some times the radio comes on and everything works fine but then there's other times when it does not work at all do you know what may be causing this problem?
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
Hi One of the things that can cause the system to behave like that, is a bad mulf... The Bluetooth/telefone module in the boot... Disconnect it and put a optic loop on the optic cable, to bypass that module... if the problem goes away... you found the issue... if not, you might have a bad CCC... Hope that helps... Thank you for watching and for your comment!
@RitxieValens
@RitxieValens 6 лет назад
Muito bom! Bem explicado! Thanks! :-)
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Obrigado! Thank you for watching!
@naushadali95
@naushadali95 6 лет назад
nice video
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Thank you!
@RICKYARIADNA
@RICKYARIADNA 2 года назад
which is the antenna connector of that radio?
@bisobh1
@bisobh1 5 лет назад
i enjoyed it thanks, question : can this problem affect microphone for telephone communication or that is another circle
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
Hi Not really... although the phone module is on this optic network, the microphone is a direct connection to the module itself... If that makes sense... Thank you for watching and for your comment!
@kyhomegarage3430
@kyhomegarage3430 7 лет назад
Very informative video. If optic cable is broken or damage what is procedure to fix it. Thank you.
@LMAutoRepairs
@LMAutoRepairs 7 лет назад
KY HomeGarage Hi You need to cut it, install terminals and a coupling...
@kyhomegarage3430
@kyhomegarage3430 7 лет назад
thank you that was very helpful.
@donaldscottt4447
@donaldscottt4447 2 года назад
I got no light in my fiber optic cable from the amps to the Bluetooth module?
@anvelas
@anvelas 5 лет назад
Hi. Thanks a lot for your video. Please help me, I have a 530 with mask, no video on screen but radio works, aux works, sometimes the screen goes orange, what can I do?
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
Scan it and run a diagnostic session... you can test the screen with a good scan tool, is the screen passes the test, the your mask is gone, if fails... well you know... Thank you for watching and for your comment!
@EYES2CU
@EYES2CU 6 лет назад
Hey thanks, my car didn’t come with the cd changer but am getting an sos call failure and when I did diagnostic it states unable to wake car would the fiber loop help
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
EYES2CU Hi The SOS failure can be other issues... Do you have an active subscription? Thank you for watching!
@qasimriaz1478
@qasimriaz1478 6 лет назад
Hello Can you give me any link where i can buy optical cables plug for cd changer Same one you bought for this car.. Thanks
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Qasim Riaz Hi Have tried eBay, or a scrap yard? Thank you for watching!
@drivewasher
@drivewasher 6 лет назад
Had someone unplugged the optic from the mask and plugged it into the Parrot kit? As you unplugged the Parrot to put it back in the mask, will the Parrot not work now? Also if you have to "Add" a device IE a Parrot kit, do you have to splice/alter the individual fibre cables into another plug by adding 1 lengh of fibre?
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Steve Ashcroft Hi Steve! Indeed... someone when fitting the parrot, has left the optics unplugged. All they had to do was to move the optics from the original car radio plug, to the parrot cable adaptor... which was what I did. The parrot does not need optics, and will just carry on working as normal. If you need to install something that needs connecting to the optic network, yes, you need to run extra optic cable in order to add the device and close the loop. In this case, the mulf (the Bluetooth phone system), in the boot was faulty, I would prefer to have it replaced and keep everything through the I-Drive than add the parrot... but the owner didn't... lol Thank you for watching!
@Stoned_Bic
@Stoned_Bic 10 месяцев назад
I wanted to ask , my ccc was working when bought off the dealer a week later it would reboot over and over and work random. Now its just turns on random and no logo just a 1 second white screen and goes black or again. I see the connection for the cd changer but its not there. I bought it without it and it worked fine for a few days. I dont believe i have logic 7 and only 3 modules in back. Also navigation and satellite radio are greyed out…Any advice? I need my music :( 2006 bmw 530i (05/05 manufacturing date)
@LMAutoRepairs
@LMAutoRepairs 10 месяцев назад
Disconnect all the optic modules and the CCC should boot normally, if it doesn't, the CCC is most likely faulty... 👍👍👍
@liamsmith7398
@liamsmith7398 5 лет назад
CAN YOU JUST UNPLUG THE MULF TO CURE THE PROBLEM WITH THE IDRIVE CUTTING OUT INTERMITTENTLY? I DONT EVER NEED OR USE THE PHONE CONNECTIVITY PART, JUST CD'S AND RADIO.
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
Hi You can... but I would advise to put a look on it... Thank you for watching and for your comment!
@stevetelfer769
@stevetelfer769 6 лет назад
hi do you do remote coding on the bmw e60 ? as i want to fit a cd changer in mine thanx
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Steve Telfer Hi Sorry... I don't... Thank you for watching!
@clustermaster8456
@clustermaster8456 4 года назад
Hi Luis, thx for another helpful video. Are you saying that if I plug in only powers and grounds to my CD player, and if I disconnect the optic fibre, I should see the red LED flashing from inside the connector? I'm trying to understand if the loop starts from the flashing LED at the radio. Thx :-)
@LMAutoRepairs
@LMAutoRepairs 4 года назад
Every module in the loop will have an active "led"... in order to transmit data... And yes... if you plug only power and ground the data transmitter should light up... Thank you for watching and for your comment!
@clustermaster8456
@clustermaster8456 4 года назад
@@LMAutoRepairs thx Luis :-)
@filipspasov8360
@filipspasov8360 4 года назад
Hi, i have code A468 external open circuit (LVDS data line). CCC display is not working, BMW 530i 2004. Any chance that you can point me which direction to look for problem? I checked optical cable on module in boot and there is light. Thanks
@LMAutoRepairs
@LMAutoRepairs 4 года назад
The LVDS cable, is the cable that connects the ccc to the screen... Check that some how it did not became loose... a faulty cable or screen or ccc is also a possibility... Thank you for watching and for your comment!
@galihguntur7882
@galihguntur7882 2 года назад
Hallo.. thx for video
@LMAutoRepairs
@LMAutoRepairs 2 года назад
😊 👍👍👍
@alekasenov4749
@alekasenov4749 4 года назад
Hi, I had raplace my mask unit with second hand, and now I have a radio problem, all the other working fine, but my radio fm now crash. If find some fm station, after few minute crash and can't find any radio station. My broken mask unit had very good radio, but I replace it becouse can't read cd. I check the optics and it’s fine. Do I need to recode the new mask unit to comunicate correctly with antenna module, or check something else?
@LMAutoRepairs
@LMAutoRepairs 4 года назад
Possibly... or the software on the "new" mask is some how incompatible... Best it to recode and update the units... mask and antenna... Thank you for watching!
@ayazali5251
@ayazali5251 6 лет назад
Im having issues with my Bluetooth in my 2011 E91. Bluetooth connections are fine but the people I am on a call with all complain that they cannot hear me properly. There seems to be some sort of interference or static sound. I can hear the person on the other end perfectly well - they cant hear me so well - Is there a quick fix to this or do i have to take it into a garage? Thanks .
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Hi You can do some basic checks... like ensure that all the connections are good and secure, that the microphone is clear and not covered with dust etc... Other than that, you need to scan it, see if there is any codes, and go from there... To be honest, I don't think something like that would trigger any codes, nor you will be able to see it with the diagnostics... Ultimately, you can try a software update, but for that you need to visit the dealer, or a garage with the correct equipment. Hope that helps. Thank you for watching!
@muhammadbaig7717
@muhammadbaig7717 2 года назад
I have a 2010 bmw 5 series .I have sos malfunction sign and my aux stopped working however my radio and cd work .Any suggestions ?
@26rari13
@26rari13 2 года назад
Same
@daviskalvans4304
@daviskalvans4304 5 лет назад
My E61 CCC doesn't even have the red LED lights on. Is the block fucked?
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
Well, with the CCC on, you should have the exit led on... if not, you can consider a faulty unit... unfortunately... Thank you for watching and for your comment!
@Officialpaiman
@Officialpaiman 5 лет назад
Hi Thank you for he video. My 2005 530i is not giving me sound and I saw the sos sign with a slash / on it. I was wondering if I can fix it with the optical fiber loop from amazon?
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
Hi Difficult to say... you can try just in case the tcu is the culprit, but without diagnose it is a shot in the dark... Thank you for watching!
@Officialpaiman
@Officialpaiman 5 лет назад
LM Auto Repairs if I try this and it doesn’t work it means the culprit is one of the other two modules. In that case what would I look for?
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
@@Officialpaiman You can have a bad head unit... I would recommend you to have it scanned and diagnosed... There is actuator tests that can also help guide you in the right direction...
@Officialpaiman
@Officialpaiman 5 лет назад
LM Auto Repairs oh and out of the three fm am and cd options the CD is grayed out.
@chrismoss6132
@chrismoss6132 3 года назад
Hiya mate I know it's abit off topic but I have a issue with my pdc I'm getting a fault come up and my green light is flashing I have no signal coming from either of the sensors I've self tested the sensors but none of them are working I've changed the pdc module but the fault is still there. I just thought I'd ask the question in case you could shed any light on what to do next many thanks
@LMAutoRepairs
@LMAutoRepairs 3 года назад
Hi Why have you changed the module? Have you scanned the module first? Have you checked power and grounds? That's what you should have done first... 👍👍👍 Thank you for watching!
@mr.notimportant
@mr.notimportant 5 лет назад
I have a 2004 bmw 645ci and the screen went out not long ago. The BMW logo comes on and goes out over and over again all day. Do I need a ccc or is it a easy fix. Help?
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
Hi Most likely that means a replacement... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FQyu4xbo9bU.html Thank you for watching!
@stevenpanagatos4165
@stevenpanagatos4165 Месяц назад
I have an E187 cd k can no communication fault. Code. My i drive is black and radio not working so what should i do i jave an odea but can u please give me some advice. Please. I have a 645ci by the way.
@LMAutoRepairs
@LMAutoRepairs Месяц назад
Check power grounds and communication lines to start with... At least, it is what I would do... 👍👍👍
@alexmathus8822
@alexmathus8822 4 года назад
Hello, I have noticed we have the same head unit. Do you recall the reset procedure for these? My radio will not turn on within the screen, all fuses are good within the wiring behind the unit and the fan is spinning so I suspect it is in working order still.
@LMAutoRepairs
@LMAutoRepairs 4 года назад
Hi I think both eject buttons and the mute... all at the same time... Thank you for watching!
@alexmathus8822
@alexmathus8822 4 года назад
LM Auto Repairs Thanks for your reply. I do not have the DVD option and only have one eject button, which is for the CD. Pressing the mute and this one eject will not reset it. I saw in this video your unit only has one eject button as well. Not sure how you reset it.
@LMAutoRepairs
@LMAutoRepairs 4 года назад
@@alexmathus8822 Not sure on that one either... But the reset, is usually if the system crashes or become unresponsive... if is completely off, then you might have a different issue...
@EYES2CU
@EYES2CU 4 года назад
Hey thanks for the info, but mine came without CD player is there a way to continue without CD player or do I need to get CD player to complete The loop
@LMAutoRepairs
@LMAutoRepairs 4 года назад
You mean without CD changer? They cost close to nothing really... No, you need a loop and code the car... that should do the trick... Thank you for watching!
@EYES2CU
@EYES2CU 4 года назад
LM Auto Repairs can you send me link on how to do it
@robertiozan
@robertiozan 3 года назад
Heya . I`m just wondering how to open the connector for the fibre cable ? So there is 2 cables goin in . Any tips how to open that tiny connector ?
@LMAutoRepairs
@LMAutoRepairs 3 года назад
Very easy... There is some tiny tabs you need to lift... while pulling the cable out... 👍👍👍
@robertiozan
@robertiozan 3 года назад
LM Auto Repairs Where are the located more exactly ? Sorry just new to all this 😁
@ahwee77329
@ahwee77329 5 лет назад
if you want to bypass the cd changer. can you directly hook the optic cable from mulf blue tooth to mask and loop it .
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
You can just loop it at the CD changer plug... Thank you for watching!
@litigious
@litigious Год назад
@@LMAutoRepairs What if you don't want the CD changer? What if you want to replace the CD changer with a new radio that doesn't have an optic cable input?
@stevenpanagatos4165
@stevenpanagatos4165 Месяц назад
Hey brother my screen went black in my 04 e63 i got the code of e187 CD k can bus no communication fault i tried a diffrent screen and nothing. Any advice brother ?
@LMAutoRepairs
@LMAutoRepairs Месяц назад
Hi So, you can't communicate with the screen, right? Have you checked powers and grounds on the screen plug? 👍👍👍
@caius1137
@caius1137 3 года назад
Hi. I own a BMW E90 with bluetooth from factory and I'm not getting any fiber optic signal. The mulf isn't getting any signal and the loop under the steering wheel isn't getting signal too. What should I do?
@LMAutoRepairs
@LMAutoRepairs 3 года назад
Check which module is failing... or if any of the optics are disconnected or damaged.. Thank you for watching!
@dwillsorne588
@dwillsorne588 10 месяцев назад
Hello, I am having issues with my 2006 525i. My problem is that only the bass is working out of all the speakers. No chime or parking sensor sound, no seat belt warning either. If you are will to connect , please let me know.
@LMAutoRepairs
@LMAutoRepairs 10 месяцев назад
Have you scanned the car, just in case there is something in there that might help? 👍👍👍
@dwillsorne588
@dwillsorne588 10 месяцев назад
@@LMAutoRepairs There is a code that reads: CD-GW/M-ASK-GW (Control Display (Gateway) - CIC-GW/CCC-GW/CHAMP-GW/RAD2-GW) ::: A168 M-ASK-GW: Hardware Faulty
@wearethe80s4sure
@wearethe80s4sure 3 года назад
Hello, my logic 7 works, although the FM AM doesn't work. CD, CDC, DVD all work i see radio stations, but when you try to do a manual change it stays at 0.0?? Ever seen this?
@LMAutoRepairs
@LMAutoRepairs 3 года назад
No never... Possibly the radio module... or the antenna module... Scan the car and go from there... Thank you for watching!
@wearethe80s4sure
@wearethe80s4sure 3 года назад
Thanks, yes, rather odd.
@Skillz55678
@Skillz55678 Год назад
Hello, i have problem with most, diganostic says 00FFF2, i have e90 lci with cic and combox, my bt, aux and USB doesnt work, nav is working and everything on the radio, do you know what could be the problem? The optic on cic and combox are blinking red, the optic cable that goes into combox in the boot is blinking red, the diagnostic port at the front under the steering wheel is not blinking red, i dont know if it should or not, do you know where the problem could be? Also the optic cable that goes into cic is not blinking red
@LMAutoRepairs
@LMAutoRepairs Год назад
Follow the optic network... see which module is not completing the loop, or where the break is... 👍👍👍
@Skillz55678
@Skillz55678 Год назад
@@LMAutoRepairs do you know how can i find what modules i have or throigh what modules it goes ? I have the cic radio and combox,
@Skillz55678
@Skillz55678 Год назад
Does the telephone in armrest use the loop also? Because on the diagnostic it says it cannot communicate with telephone, the physical telephone is not there
@LMAutoRepairs
@LMAutoRepairs Год назад
@@Skillz55678 All multimedia modules...
@NightslashDeltaX
@NightslashDeltaX 5 лет назад
I have a red light in all my fiber optic cables and even the one above the pedals, I used the loop on each connector but nothing solved my issue, I still have a sos light and no audio, any idea what could be causing my problem?
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
Have you scanned the car? Any codes? Thank you for watching and for your comment!
@NightslashDeltaX
@NightslashDeltaX 5 лет назад
LM Auto Repairs the only code I have is low pressure fuel pump plausibility
@carlosdelrosario6403
@carlosdelrosario6403 3 года назад
Thank you for the tutorial. I have a 2004 530i e60 and my CD, radio, and I drive hangs and loses sound and control. It goes back after a while why does this happen? Sometime it last quite a long time. Sometimes it happens quite often.
@LMAutoRepairs
@LMAutoRepairs 3 года назад
Hi If you have the mulf module in the boot, check that... they are prone to fail... Easy test, is disconnect it and loop the optic fiber... if the problem goes away, you have your answer...😉 Thank you for watching and for your comment!
@juliuscaesar756
@juliuscaesar756 Год назад
Is the mulf module in the trunk under the tire small Grey module?
@saladin7467
@saladin7467 Год назад
I have the same, ever find a fix?
@bmw3258
@bmw3258 7 лет назад
Hi, i have a head unit not coded correctly error that has popped up on my 2004 e60. everything works fine, sound , cd changer etc. will a SG_CODIEREN job fix the problem. and which module will i have to do it on? thank you.
@LMAutoRepairs
@LMAutoRepairs 7 лет назад
imran khan Hi That comand needs to be performed on the actual ccc... But, for that to work you first need to ensure you are using the correct profile, and that this is correctly set up... (plenty of info out there...) Second, if you have any mods that have been done, and/or are not in the VO, the coding will not be correct... if that makes sense... Hope that helps...
@bmw3258
@bmw3258 7 лет назад
Thank you!
@26rari13
@26rari13 2 года назад
Hi I recently purchased new head unit I changed the fiber optics are they supposed to go in a specific direction or are they two way. Cd and radio works but no aux or usb
@LMAutoRepairs
@LMAutoRepairs 2 года назад
The fibre optics just need to be plugged in the in and out direction correctly... The plug is usually keyed... so you can't really get it wrong... Have you coded the unit?
@26rari13
@26rari13 2 года назад
@@LMAutoRepairs I’m going to try to coding it maybe that can be the issue but really didn’t pay much attention to direction of fiber optic ( long story )
@26rari13
@26rari13 2 года назад
Thank u
@26rari13
@26rari13 2 года назад
To be clear that can cause aux section to be greyed out all the while the radio and cd changer are still in effect
@memzbalci1502
@memzbalci1502 3 года назад
Hi mate my radio keeps cutting out but as soon as I remove the fibre optic cable it’s back to normal Any idea ?
@LMAutoRepairs
@LMAutoRepairs 3 года назад
Perhaps one of the modules causing it? Bypass one by one, till you find out which one is the culprit... Thank you for watching!
@moky4241
@moky4241 4 года назад
Hi. I have e60 2009 everything built in already. I opened the centre console and replaced all leds from amber to white. When I connected everything together again cd player and mobile bluetooth not recognised. Sos light on dash keeps popping up! Do I need to get it coded? Any help pls I'm stuck.
@LMAutoRepairs
@LMAutoRepairs 4 года назад
Don't think the LEDs replacement would cause any issues... make sure you haven't left anything disconnected to start with... try to clear any codes that might be stored in the modules... Thank you for watching and for your comment!
@moky4241
@moky4241 4 года назад
@@LMAutoRepairs thanks for the advice. One of the fibre cables weren't connected fully to the back of the cd player. Thanks to your vid i was able to distinguish which cable it was. Thanks 👍
@LMAutoRepairs
@LMAutoRepairs 4 года назад
@@moky4241 That's great! Well done!
@golamsarwaralamsiddique2617
@golamsarwaralamsiddique2617 5 лет назад
Let me know if I have not pulled my BMW X1 frm, then whether the car will be ignited,or not
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
GOLAM SARWAR ALAM SIDDIQUE Confused... sorry... what exactly are you looking for?
@golamsarwaralamsiddique2617
@golamsarwaralamsiddique2617 5 лет назад
LM Auto Repairs Actually I want to know if the problem of my car is frm, then what can be the problem?
@golamsarwaralamsiddique2617
@golamsarwaralamsiddique2617 5 лет назад
LM Auto Repairs I do not have the ignation light in my car, but despite all the parts are good, the car ignition lights are not going on, I do not understand what's worse
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
GOLAM SARWAR ALAM SIDDIQUE Have you scanned the car?
@michael-hb4gc
@michael-hb4gc 3 года назад
Hi sorry I know this video is old but I’ve been trying to fix my audio issue for a while now. It’s a 2010 550i I have the sos light and no audio. Bypassed the module under the spare tire (mulf?) I’m getting lights on every connection now after bypassing it but still no sound.
@LMAutoRepairs
@LMAutoRepairs 3 года назад
Hi No sound at all, or just from certain media? It might worth to give the car a scan, and see if there is any faults logged... Thank you for watching and for your comment!
@michael-hb4gc
@michael-hb4gc 3 года назад
LM Auto Repairs no sound at all, no door chime or anything. I’ll try scanning it. Thanks so much.
@gabrielherda3714
@gabrielherda3714 2 года назад
Hi , if I changed the mask should be coded ? Or is plug and play ? Thank you
@LMAutoRepairs
@LMAutoRepairs 2 года назад
It should work, but highly advised to be coded, as some functions will either not be available, or will not work... 👍👍👍
@gabrielherda3714
@gabrielherda3714 2 года назад
Thank you . You are the best !!!!👍
@LMAutoRepairs
@LMAutoRepairs 2 года назад
@theofficiallavar
@theofficiallavar Год назад
What causes the optic to be blinking on/off and no sound coming out?
@LMAutoRepairs
@LMAutoRepairs Год назад
The blinking is normal... Scan the car and see what is going on... Possible a faulty module... 👍👍👍
@theofficiallavar
@theofficiallavar Год назад
@@LMAutoRepairs thank you sir.
@EpicConcept
@EpicConcept 3 года назад
Nice
@LMAutoRepairs
@LMAutoRepairs 3 года назад
Thanks! 👍👍👍
@1bad335ii
@1bad335ii 3 года назад
Hey I get no red light or power in my fiber optic ? It’s not a fuse or amp
@LMAutoRepairs
@LMAutoRepairs 3 года назад
The light is emitted by every module in the ring... The fuses, will for the modules itself... Thank you for watching!
@amydarocker9236
@amydarocker9236 5 лет назад
My bmw e60 without navigation radio works well. But there is no sound when i play music via cd. I don't have a cd changer as well. It is a simple bmw cd player with radio as your's i think. Sound comes when i play radio, but no sound when i play cd. Can u help ? What should be the problem ??
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
Hi This car was not mine... only had it to repair. But, it might just be a faulty unit... if the CD is playing normally but no sound... Thank you for watching and for your comment!
@amydarocker6531
@amydarocker6531 5 лет назад
@@LMAutoRepairs faulty unit means ? Faulty cd player ?
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
@@amydarocker6531 Yes... 👍
@amydarocker6531
@amydarocker6531 5 лет назад
@@LMAutoRepairs thanks. Just one last question. If i buy a same used one from ebay. Do i need coding for replacement ?
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
@@amydarocker6531 Most likely yes... As will be settings or options missing or visible that do not match your car...
@imadabed9823
@imadabed9823 7 лет назад
Hi, i bought BMW e91 touring 2006 the navigation always says ” please insert Dvd map” in same time I can’t insert the Dvd navigation so today I removed the Dvd navigation unit and i saw the optical fiber not flashing red light ?? can you tell me exactly what is the problem ?? And from which place I should to start searching. Thanks
@LMAutoRepairs
@LMAutoRepairs 7 лет назад
Imad Abed Hi Is the red led on on the navigation drive? As I have explained, you need to go and check the next node... see if the unit is working, and check the optic cable...
@imadabed9823
@imadabed9823 7 лет назад
Thank you for quick answering, behind the DVD navigation unit I removed the cables and their is optical fiber wire not flashing in same time I checked the optical fiber wire in the cd changers in the trunk its flashing and also i have under the driver's steering wheel fiber optics loop connector it's red flashing.
@LMAutoRepairs
@LMAutoRepairs 7 лет назад
Imad Abed OK So if the one of the cables is not illuminated behind the nav drive, one of the two... Or you have a break on the cable, or there is a module in between that is not working... Make sense?
@imadabed9823
@imadabed9823 7 лет назад
How can I check the problem I mean which place I should to start.
@LMAutoRepairs
@LMAutoRepairs 7 лет назад
Imad Abed As I have explained, the option fibre network is a loop, that goes around all modules connected to it. First establish how many modules you have connected, you already know that you have the fibre working OK on some points, expose all the other modules and see on with one the fibre is broken... or which one does not have the optical working...
@jorgemurga6531
@jorgemurga6531 3 года назад
We're you guys located at
@LMAutoRepairs
@LMAutoRepairs 3 года назад
No guys...😋 One man band here... doing this as a part time/hobby....😉 Thank you for watching!
@TruenorthmtGod
@TruenorthmtGod 5 лет назад
So if I get no signal I have a bad cable
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
🤔 Or a module... make sure the module is transmitting... Thank you for watching!
@asifmunshi812
@asifmunshi812 6 лет назад
Hi I have a bmw e60 2005 with professional media. My Bluetooth connects my phone but there's no sound from the car speakers. Also when you choose communications it just keeps saying please wait and won't get info from the phone. It used to work but just stopped any ideas please.
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Asif Munshi Hi It stopped working while using the same phone or have you changed you phone? Have you had the car scanned? Thank you for watching!
@asifmunshi812
@asifmunshi812 6 лет назад
It stopped working with same phone and since then I've tried different phones they all connect but don't get any sound from car speakers. I've also noticed I don't get the telephone signal strength icons on the idrive screen.
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Asif Munshi Have the car scanned first... The phone module on the E60 are prone to fail... so you might be suffering from that issue...
@asifmunshi812
@asifmunshi812 6 лет назад
I tried replacing the mulf unit in the boot ( Bluetooth module) and it was doing the same thing. Any other suggestions please
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Asif Munshi Have you tried another phone?
@fauzi9786
@fauzi9786 3 года назад
Hello, If my mulf to mask cable is broken and I don’t intend to use the mulf is it possible to direct the cd changer back to the mask? Or I can just use the loop at the socket of the cd changer?
@LMAutoRepairs
@LMAutoRepairs 3 года назад
Yes... you can loop at the back of the CD changer... Thank you for watching and for your comment!
@fauzi9786
@fauzi9786 3 года назад
@@LMAutoRepairs thank you!🙏🏼
@LMAutoRepairs
@LMAutoRepairs 3 года назад
👍
@RicardoGZ
@RicardoGZ 2 года назад
how can i do that? my CD option is greyed out😔😔 the thing that does not work in my car is the bluetooth
@LMAutoRepairs
@LMAutoRepairs 2 года назад
Hi Do what? 🙄
@1bad335ii
@1bad335ii 3 года назад
I got no power coming from optic to the rear of the car was wondering what it could be no sound :/
@LMAutoRepairs
@LMAutoRepairs 3 года назад
Most likely... Thank you for watching!
@emiliomauleon3846
@emiliomauleon3846 8 месяцев назад
Will this concept for an Audi a6 quattro 08 mmi
@LMAutoRepairs
@LMAutoRepairs 8 месяцев назад
Optical fibre systems on cars work all very similarly...yes... 👍👍👍
@emiliomauleon3846
@emiliomauleon3846 8 месяцев назад
@@LMAutoRepairs thank you. Keep up the good work
@alexkofiasiamah8182
@alexkofiasiamah8182 3 года назад
Hi boss, do you have a workshop?
@LMAutoRepairs
@LMAutoRepairs 3 года назад
No... Thank you for watching!
@keenanrochester2504
@keenanrochester2504 6 лет назад
Need help I have BMW 530i E60 I checked ccc and Blue tooth, cabin filter compartment all wires look good all fuses work, no water damage no rust no corrosion, I bought the fiber optic loops male and female troubleshoot and nothing works radio don't work navigation screen is completely black no door chimes car won't start, I did not try battery cables yet but they look good too, can someone help me
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Keenan Rochester Hi If the car doesn't start then I wouldn't start with that... and I doubt that the optic network would have anything to do with it... Have you attempted to scan the car? Thank you for watching!
@keenanrochester2504
@keenanrochester2504 6 лет назад
LM Auto Repairs it did start, it was running fine just didn't have navigation and radio working, I was starting the car and the at the same time my son open his passenger door all the light started flashing and car stalled and would not restart, I checked the battery it was strong
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Keenan Rochester Close the passenger door... done!😉 Now seriously, the door thing might have been a coincidence... You are working blind without a scanner... and perhaps look at live data etc...
@mendes57100
@mendes57100 6 лет назад
Olá amigo, otimos vídeos com boas dicas, gostava de ter uma opinião se for possível, estou com um problema no meu E60 de 2005 o módulo mulf avariou, consegui arranjar um usado mas é mais recente o mulf2 será que se consegue por a funcionar? quais são os passos que devo fazer, basta actualizar a mask? ainda não tentei fazer nada até ter mais informações, fico mesmo grato se puder ajudar, obrigado
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
André Mendes Bem... eu acho que deve dar retirando o velho mulf e adicionando o novo ao VO or FA, depois codificar o carro de acordo com o novo VO... todos os módulos do carro se vai configurar de acordo com o novo mulf... mas eu estou só a pensar alto... tens de pesquisar... vê se o código do mulf 2 no VO é diferente do antigo... se for há uma boa chance de funcionar...
@mendes57100
@mendes57100 6 лет назад
Já pesquisei muito mas não está fácil até parece que as pessoas têm "medo" de falar sobre isto como se fosse um segredo...enfim... quando dizes codificar o carro isso é codificar os módulos todos depois de actualizar o VO? Tenho a string 644 para o mulf antigo, pelo que pesquisei para o mulf2 tenho de adicionar o 6FL mas pelo que entendo isso é só porque tem USB... como faço para saber qual é o VO do módulo?
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Lol... "...não está fácil até parece que as pessoas têm "medo" de falar sobre isto como se fosse um segredo...enfim... " Ora bem... aqui não há segredos... :-) Nem todas as interfaces dão para ver o VO... O ideal era arranjar um cabo para trabalhar com o NCS... O processo é idêntico a este... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ESs__fnF6rQ.html Mais alguma coisa, disponha...
@mendes57100
@mendes57100 6 лет назад
Digo isso porque se tentar pedir ajuda em algum forum sobre este assunto não obtenho nenhuma resposta... cabo e software já tenho só me falta saber o procedimento..neste momento se tentar aceder ao módulo dá um erro porque não tenho o VO para mulf2.. nesse video explica como alterar VO e code mas não há maneira de saber qual a string correcta de um módulo para adicionar no VO. Obrigado
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Se tens cabo e software, entra com o NCS and modifica VO, adiciona $6FL e $620. Depois codifica o carro todo... ao fazer isto os modulos sao codificados de acordo com o VO. Se não quiseres codificar o carro todo, codifica manualmente os modulos... De qualquer forma deverias conseguir aceder ao mulf... mesmo que não codificado... Mas faz isso primeiro...
@Officialpaiman
@Officialpaiman 5 лет назад
LM Auto Repairs hi so when I look at the back there’s two modules the amp and the tcu I think. I took the plugs out They both have a light the comes from the fibre optic wires. My Bluetooth came back on btw. The cd changer is working, it ejects properly and seems to be working. I’m thinking it’s the mask (head unit).
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
Hi It can be... but as I already mentioned... I would stop trying to guess, and would get it scanned and properly diagnosed... I am not seeing the problem, so is also difficult to help...
@Officialpaiman
@Officialpaiman 5 лет назад
On my 2005 bmw 530i the diagram for the fiber optics is headunit Bluetooth module amp and the the cdc and back to the head unit .. right?
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
@@Officialpaiman If that is all the modules you have on the fiber network, yes...
@Officialpaiman
@Officialpaiman 5 лет назад
LM Auto Repairs thank you I ave found that the problem is the amp that is why the cd is gray on my screen.
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
@@Officialpaiman Nice one... glad you found the issue!
@dragonfire5702
@dragonfire5702 Год назад
👍
@LMAutoRepairs
@LMAutoRepairs Год назад
😊 👍👍👍
@TheAutumnWind_RN4L
@TheAutumnWind_RN4L 11 месяцев назад
Do you have a link for the connectors?
@LMAutoRepairs
@LMAutoRepairs 11 месяцев назад
Check ebay... I believe I got them from there... 👍👍👍
@TheAutumnWind_RN4L
@TheAutumnWind_RN4L 11 месяцев назад
@LMAutoRepairs yep, just saw em. Hey, I had to take my glove box off in order to change my blower motor. In reassembly, I noticed the red light optics (output?) wire was hanging out of its connector. I was able to unlock its little white cap, put some adhesive on it and place it back into the connector. When I plug it back into the V shaped housing that loops the connection, and place it back into the compartment, I get a little intermittent static from the aux and satellite radio. If I leave it hanging, it sounds cleaner. What would be the cause of the static when I remount it? Do fiber optic wires short?
@LMAutoRepairs
@LMAutoRepairs 11 месяцев назад
They do not short, and it is weird what you are describing... The optic fibre carries digital data, in the form of light pulses... either works or not... Check around that area, my guess is that there is something else being disturbed that causes that... 👍👍👍
@TheAutumnWind_RN4L
@TheAutumnWind_RN4L 11 месяцев назад
@LMAutoRepairs I got frustrated and left it outside of the little compartment, slightly hanging in the glove box. It's been holding up well so far. At least if I hear it again, it's readily accessible. I might re-harness it when I switch out my head unit. Thank you very much for your replies. Got a new subscriber.
@LMAutoRepairs
@LMAutoRepairs 11 месяцев назад
☺️ 👍👍👍
@shunkr
@shunkr 3 года назад
Ok first thing I will do is to get battery cable off for 30min so I reset bluetooth settings.
@colinlyne1660
@colinlyne1660 6 лет назад
Hi Imsvvavr how many systems/modules use the fibre optic option in this E60
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
colin Lyne Difficult from the top of my head... But, all the media/entertainment modules are on one of the fibre optics. So on that one depends on the car options... On the safety network, it is all the safety modules... but once again, I am not sure how many ... sorry..
@rachiddz5004
@rachiddz5004 4 года назад
I have a BMW like yours. but I can't find the reference of cd gps navigation
@LMAutoRepairs
@LMAutoRepairs 4 года назад
What reference are you referring to? Thank you for watching!
@rachiddz5004
@rachiddz5004 4 года назад
@@LMAutoRepairs I'm looking for a flash for M-ASK iDrive .or what is called The flash ..Information My car is like yours
@LMAutoRepairs
@LMAutoRepairs 4 года назад
@@rachiddz5004 The flash you can find it on bmw flash files... but you need the tools to flash it... Why do you need to flash it? Are you having issues with it?
@rachiddz5004
@rachiddz5004 4 года назад
@@LMAutoRepairs thank you for your reply.my problem it starts.programming with fvdi for coding my M-ASK.but unfortunately it is blocked.now it does not light up. I checked all the fuses..I can't find the solution to reprogram my M-ASK - M-Audio system..It's missing file properties for MOSTGW/M-ASK
@LMAutoRepairs
@LMAutoRepairs 4 года назад
@@rachiddz5004 FVDI was probably your first mistake... I mean, for coding BMW, you should have go with BMW tools... Look for someone with ISTA or Maxisys, or other tool capable of flashing BMW... and try that... unless the unit is now completely bricked... which FVDI unfortunately is quite know for doing that... Good luck...🤞
@tuanvu-kc6st
@tuanvu-kc6st 6 лет назад
Hi, my ccc still reboot, is the ccc module broken or is it a broken loop in one of the modules that's make the ccc module reboot.
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
danny Wu Hi That is usually the CCC itself...
@tuanvu-kc6st
@tuanvu-kc6st 6 лет назад
Hi lmsvvavr, thanks for reply. i just unplug the most cable from the mulf and the ccc still doing strange. When I unplugged all of the cable (3) from the mulf the ccc works perfect he don't reboot anymore. Do you think that the mulf is broken? Now I don't have any sound even don't warning sound. I have logic 7
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
danny Wu Ok... so it might be the logic 7... If you unplug logic 7 and leave the mulf, how does the ccc behaves? Have scanned the car?
@MasAUS
@MasAUS 4 года назад
👍👍
@LMAutoRepairs
@LMAutoRepairs 4 года назад
👍👍 Thank you!
@mrm3686
@mrm3686 5 лет назад
Hello there i have a bmw 325i e90 2006 and my car had a short so what happened i got a sub install in the back and everything was fine but something happened to the remote wire going to sub and there was a short i am thinking and some smoke came out and i turned car off right away and remove negative post. So i remove the rear seats and i noticed it melted some green wires in a loop two wires and do u have info what can it be i have part number and looked it up and i am told its for SOS' bluetooth and Microphone i wanted to be sure im glad it was minimal but want to make sure though. The green wire is optic fiber . I want to repair it i will buy the quick connectors. I asked a friend and he sayed that butt connectors should be fine but high quality with good insulation and clamp down really good for signal/data to pass. Let me know please thanks 14523661
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
Hi You don't really crimp optic cables... If burned, see if you have enough to cut the damaged area, and connect it again, otherwise buy some optic cable and replace the affected extension of the cable... There is some repair kits out there... Just go on eBay... you can find everything you need for that in there.... Hope that helps. Thank you for watching and for your comment!
@mrm3686
@mrm3686 5 лет назад
@@LMAutoRepairsThanks and yes i will buy repair kit. Im glad my car is doing fine but im wondering if that wire is for my radio microphone and SOS its green wire that is tucked in a plastic housing in a loop.
@mrm3686
@mrm3686 5 лет назад
@@LMAutoRepairs There is enough cable for my to Cut and remerge can u please send me a link of the adapters to merge the optic wire again.
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
@@mrm3686 Hi Yes... the fibre optic is the communication line between a few modules on the BMW cars... repair that, and you should be fine...
@mrm3686
@mrm3686 5 лет назад
@@LMAutoRepairs another question besides that my friend my uncles bmw 328i e90 2009 His primary key works normally as it should but secondary one doesn't function how can i program it?
@SaqibKhan-vk6yn
@SaqibKhan-vk6yn 6 лет назад
Hi, Can I ask where are you based as I have the same issue in my BMW E60 2005. I definitely need help with installation of the dension 500S BT kit. If you can kindly provide your email so I can get your contact no. Really appreciate it. Thanks
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Saqib Khan Hi First, thanks for watching! For reasons that you might understand, I will not be sharing my email here... As far as I am aware, the dension replaces the CD changer... and it comes all with instructions... where do you think you will need help?
@SaqibKhan-vk6yn
@SaqibKhan-vk6yn 6 лет назад
I,m the second owner of the car and first owner has mixed up the fibre optic cables to fit some external system which he removed before selling off the car. I fibre optic lights up behind the headunit but doesn't lights up in the glove box extension. Somewhere link is broken. First owner also removed the cd chamger which i ordered and received now. My local audio specialits have never set dension and hence doubtful that they will be of any help. Let me know how can i bring my car to you. Thanks
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Saqib Khan Where are you from?
@SaqibKhan-vk6yn
@SaqibKhan-vk6yn 6 лет назад
London
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
Saqib Khan That's the problem... I am a bit far from you... Cambridgeshire... Because I do this as a part time, means you would have to drop the car an leave it until I have it done... and due to my work pattern, and the the weather, could mean 2 or 3 weeks... or even more... and if the optics have been messed with... well you can imagine... To be honest, I can't do it at the moment anyway, I have an S class and a 730d in the drive way, and 3 others in line... I would love to help you... sorry... Surely there is some one in the area that can do it for you... But, hey, why you don't have a go at it?
@choc860
@choc860 6 лет назад
Hey i have a question
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
choc860 Go ahead...
@choc860
@choc860 6 лет назад
Can i change my mask to ccc?
@choc860
@choc860 6 лет назад
And do you know the things i need
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
choc860 Hi Yes you can... You need the CCC and then get it coded/programmed.... With the CCC I would also get the larger screen, in case you have the smaller one... Hope that helps.
@LMAutoRepairs
@LMAutoRepairs 6 лет назад
choc860 Forgot about it... You will also need the GPS antenna... if you want it to work...
@brettbaker2091
@brettbaker2091 5 лет назад
I’ve got no red light on any connection
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
In that case you either have a break on the optic cable or an issue with another one of the modules in the loop... Thank you for watching!
@brettbaker2091
@brettbaker2091 5 лет назад
LM Auto Repairs radio won’t turn on is that start of problem
@LMAutoRepairs
@LMAutoRepairs 5 лет назад
@@brettbaker2091 Well... is definitely one of your problems... And will obviously interrupt the optical ring...
@1bad335ii
@1bad335ii 3 года назад
Did you fix it ? I have no power also in my fiber optic
@carslover3509
@carslover3509 4 года назад
Man just audio unit with small hard drive canceled all the CD changer go BMW
@LMAutoRepairs
@LMAutoRepairs 4 года назад
Not sure what you mean... But thank you for watching and for your comment!
@jamiet.g5810
@jamiet.g5810 3 года назад
wow ive been tried everything for 7 days to get my idrive working, now i believe its the missing cd changer thats the problem
@LMAutoRepairs
@LMAutoRepairs 3 года назад
You need to either loop it, or install the changer... Thank you for watching! 👍👍👍
@jamiet.g5810
@jamiet.g5810 3 года назад
@@LMAutoRepairs thanks brother
@jamiet.g5810
@jamiet.g5810 3 года назад
@@LMAutoRepairs there is no power to the m ask unit ive changed evry fuse and the mpm and body module
@LMAutoRepairs
@LMAutoRepairs 3 года назад
🤔 Not sure... at least without checking diagrams... not sure where that is fed from... but I believe is from the fuse box under the dash...
Далее
Ремонт CCC BMW прогрев платы
32:00
Просмотров 96 тыс.
ХЕРЕЙД БОИТСЯ МОЕЙ СОБАКИ!
37:08
BMW CCC Repair
33:12
Просмотров 123 тыс.
BMW MOST BUS DIAGNOSTICS AND REPAIR, E90 EXAMPLE
4:18
Просмотров 124 тыс.
BMW X5 E70 optic cable looping
1:38
Просмотров 27 тыс.
Easy BMW e60 CCC constant reboot fix
7:38
Просмотров 79 тыс.
BMW No Crank No Start? Fix IBS Sensor Fault
7:38
Просмотров 1 млн
Tiny motor, big power
0:25
Просмотров 33 млн
Вонючий случай
0:39
Просмотров 597 тыс.