BMW G20 3 Series M Performance Kit Installation! 

Thanks mate. Yea makes a nice visual difference without going too crazy. Side skirts coming on soon.

Thanks mate glad you think so. Hope LA was good! You can tell me all about it when we meet up!

True

Thank you! I appreciate your opinion!

Thanks Brian! Makes a nice difference. Check out the side skirts install and lowering springs vid too

Thanks for the sub....yes the G20 is a great looking car especially with the MSport Plud pack (19" wheels) and the body kit. Range all depends on the type of driving. 400 miles to a tank if it's all urban and 600 miles for a combined journey

Hello, i have a g20 320i and I get 36.8 miles to the gallon, but I've only owned it a couple of weeks

Thanks yes notified insurance. No huge difference for me

This kit was off eBay. At the time there were very few places where I could get them from but now. You should be able to find them easily. Try Fast Lane Styling on eBay. Their quality seems better than most

@@DownShiftThrottle thk u

Have a look in the left hand side under a flap in the boot

Thanks mate!

Thank you. White BMW's is life!

If you referring to the original spoiler, then I used just fishing line to remove it. You can hear it up to allow for the adhesive to soften helping with the removal with the fishing line

No scratches....decent quality. Probably out of stock as kit from China. Search G20 M Performance splitter or something and it will come up.

@@DownShiftThrottle thank you, on which onlineshop did you order it? I just calculate it for original M parts from germany -> 1600 EUR (lip,side, difussor, spoiler)

Check out the description in the vid the link is there....it was off an Ebay seller

If you're not lowering your car you'll be fine. If you lower it then you'll have to be careful on carpark ramps and steep decline/inclines

Thanks mate!

What is it your trying to do, is it the whole kit or just certain parts? The rear bumper, diffuser & splitter are very easy for yourself to do but I understand if your nervous when it comes to the skirts & spoiler.

@@omerta2002 Im going to fix the whole M-performance set for the G20. The shop can do it so Im going to let them

@@FinancialFaiz Your the same as me then. Only the mirror caps I went for are non OEM but I'll say again the bumper trim, diffuser & splitter can be done by a total noob in half an hour tops. You only really need to know how to work a 10mm spanner.

I just lined it up and held it to the bumper using tape and then drilled to bumper once happy with the alignment on both sides

@@DownShiftThrottle where did you drill? Just want to make sure mine is right

@gavinshookie there should be drill markings on the kit

Not gonna lie the fit and finish and quality of the plastic is spot on. I used a bit of tiger seal bonding on the splitter on the right hand side only because there was an ever so slight gap....not enough to say it wasn't flush and probably down to my incompetence haha. No issues with the diffuser or spoiler however I used tiger's seal for the spoiler for a better bonding and best practice. This has got to be the best non OEM fitting kit I've come across....that's not me being biased but honest. The carbon spoiler I've got on my M4 is non OEM and that's not a great fit I'll be honest.

DownShift Throttle I think the early kits may be a bit iffy, your rear bumper trim does look like a better fit than mine, love your vids keep up the good work 👍

It's always good practice to use additional seal where possible for a stronger hold rather than just 3M. I also used tiger seal on under the spoiler for that purpose.

Thanks :D

No probs!

Stick it down with 3m tape and then hold it down for a few minutes. Apply heat to it too using a hairdryer and you should be ok!

Thank you! Enjoy!

Sorry link has expired

Pretty good. Vid coming soon on that!

Thanks....yes everything uses pre-existing holes. No additional drilling required

The UK. The kit will cost £500. Install maybe £250.....

Hi....no I'm gonna keep it on the car as trade it in as is when the time comes. Never had any issues with OEM style bodykits when trading in. My last M140i was traded back to BMW with a KSB kit and had no issues with it.

@@DownShiftThrottle i get ya.was your corners tight to kit.my right side is bowing out not sitting flush.i might have to get a body shop to attack it .cheers

My right side one was slightly out but with the tiger seal it is now flush.....in order to remove it, once heated the tiger seal should peel off just like 3M glue residue.

Hey Sal! I guess when I didn't have the spoiler it looked good but now it looks how it should with the kit. And yes....we still need to link up!!!

Hi, in the Ebay link there is no more the back spoiler, can you advise me an other link for it? Thank you, very nice video and BMW!!

Yup I know.....as I say I got my M4 covered in Carbon lol

On a 2.0d......I think you'll ruin it.

Gotcha, cause this block is the same Block as the b58 mines 2 Cylinders vase very very resistant it’s actually called a JZ of BMW so the block on the 330i is very strong, the n20 was good but not as strong pureturbo has a turbo for it 400 whp. Infect the 330e has 400 hp on a stage 2

Factory spec

Only towards the middle section of the lip. It has pre drilled holes in the lip and with the self tappers supplied 3 of them go straight in.

So that's gonna be an issue on a leased car, I guess. Thanks for the reply though!

Not really mate as it's not visable. Even if it was an OEM kit from BMW the fittings are exactly the same

Theres no wiring....

DownShift Throttle That’s so weird, when I went to take mine off, there was wiring back there. Maybe it’s a US spec thing. Thanks!

That is bizarre.....perhaps on a US spec it is different. I'd say hide the wiring behind the new diffuser....

You don't need to touch that, the clips you need to detach are at the top,the wiring you mention is at the bottom & I believe may be the 'kick opener' for the boot.

OME RTA Thanks! I got back under the car and did it last weekend. I didn’t realize there was a separate layer of plastic for the stock diffuser from the plastic that held those wires in place

About £500

Probably but will ruin the ride

Kit is fitted from the dealership

Yes.....check out the first mods vid

Maybe it's your browser....I just tried it it works fine. It will take you to the seller's ebay shop

3M tape only

@@DownShiftThrottle am having trouble with my splitter front one mate the side bits that go onto side of bumper keep coming off i used 3m

@@DownShiftThrottle maybe you can help me with some advice brother? You instagram i can message you or call you.

Use a bit of heat when sticking or you could use a bit of sealant

@@DownShiftThrottle tiger seal? I want to stay away from that man. Dont want it runing my paint afterwards

Yes.....check out my latest vid that I put up.....all the modifications and links are in that vid.

Yup but he did say he was running low on stock.

Cool, thanks!👌

Welcome

Just bought the same kit, delivered today Rear diffuser fits a dream, boot spoiler and front skirt, terrible fit and poor quality.

👍🏽that's a shame....no issues with mine. All still holding up just fine

Enjoy the car. It will definitely live up to your expectations

About £400 all in

I've seen it on a black car it looks really stealthy. These kits even from BMW come in Gloss Black or Carbon

Lol it's virtually the same kit as youd get from BMW

@@DownShiftThrottle yes but a splitter doesn't suit it, just having the M Sport package was much neater

I wouldn't be publicising anything if it wasn't legit.

I think you misunderstand what I’m saying I’m not saying your work isn’t right I’m saying you need to inform your insurance company that you have modified the vehicle for them to amend your insurance policy

All covered my side. But yea valid comment