2017 BMW x3 idrive screen is black. Doesn’t turn on at all. Tried to reset it with the volume button and battery disconnect. Will this fix that or could be another issue?
I've purchased a replacement screen for my 2015 F30 and it is an exact replacement (I have the 8.8" screen from factory). The trim came off fine, and the screws are removed, but the wire running to the original screen that it will barely lift an inch off the dashboard. Nothing else is holding it. The wiring harness is extremely short. I can't turn it around or get behind it to disconnect the wires. Any advice would be appreciated.
I was able to solve this issue. I have the Harmon Kardon head unit and navigation built in. The wire from the head unit is much shorter than in the video. I had to take off a few more pieces of trim and loosen the head unit to move it forward without disconnecting it. This gave slack in the cable so I could swap the screen. It's a few more pieces of trim, and T20 screws but not a big deal.
i have 2010 E84 x1 i upgraded screen from 6.5" to 8.8" the screen double images so i read i need to change 2 coes . 3000 HMI * DISPLAY_SIZE_RESOLUTION = 8.8_1280x480 and 3001 EXBOX * DISPLAY_VARIANTE = breites_display however on bimmercode i cannot see 3000HMI to alter the resolution so im not stuck what can i do and why cant i see the option ?
Hi I have 2015 F20 NBT idrive needs to repalce the screen. Should I recode to match to my current car? The other screen is an identical screen second hand from donor. Thank you
www.bimmer-tech.net/page-installers - here you can find our installer in Sydney, but we don't guarantee him doing it, because the screen replacement is not from our shop :)
If my current screen is like this one, an 8.8" screen already, and it is sun damaged, if I replace it with a second hand identical screen, will it require coding? or any extra process to make it work?
