No video :(

BMW K1200LT ABS ABS2 FAULT

Подписаться 192

Просмотров 3,6 тыс.

50% 1

BMW K1100RS, late K1100LT, R850R, R1100RT,GS, R, RS, S, R1150GS, K1200RS, R1200C ABS2 FAULT TEST You can see in slow motion, the second clutch doesnt move, only a little . Is what the ABS do when it makes the test each time that you start and move your bike

Опубликовано:

23 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 11

@geosteffx 3 года назад

Which was the error code of your unit? Mine does 7 flashes when I read the error on the diagnostic socket. I've already checked the gap on both sensors, cleaned both piston and filters, checked the relay, changed brake fluid, but haven't reached the clutches yet. My last hope is, the clutch maintenance... When I reset the error, both abs indicators flash together, after a small distance they flash alternately and a squeak is coming from the unit.

@harrimansat 3 года назад

Yes, it seems that you have a clutch problem

@harrimansat 3 года назад

You can see in slow motion, the second clutch doesnt move, only a little . Is what the ABS do when it makes the test each time that you start and move your bike

@geosteffx 3 года назад

@@harrimansat Thank you for your reply! I did today a good clean in the clutches and my unit worked perfectly! I used brake cleaner and 1000 grit sandpaper and the clutches engaged instantly! Your video saved me. You're the man! 👍

@harrimansat 3 года назад

@@geosteffx Do you have any photos of your fix work?

@geosteffx 3 года назад

@@harrimansat Unfortunately no... I was so impatient to fix it, that I forgot to take pictures :-(

@user-rm9uz3lb1o 5 лет назад

why does this error appear?

@harrimansat 4 года назад

You can see in soow motion, the second clutch doesnt move

@user-rm9uz3lb1o 4 года назад

@@harrimansat why second clutch doesn't move?

@user-rm9uz3lb1o 4 года назад

@@harrimansat why second clutch doesn't move?

@harrimansat 4 года назад

I seems that is dirty, is a electromechanical clutch, activation signal is present. If you clean the surfaces, you have to desengage the big springs first to disassemble, (pin chains). you can pull them with a hook, and remove the pin