BMW LSD differential upgrade - 40% lock, 3 clutch disc install

Подписаться 9 тыс.

Просмотров 20 тыс.

50% 1

#bmwlsd #racingdiffs #bmwlsdclutch
The video shows how to install 3 clutch pack (Stage 1 kit by RacingDiffs) into BMW 188mm LSD found in E30, E36, E34 and Z3 models with 6 cylinder engines. You can also find a solution what to do in case your pressure plates (ramps) are damaged from previous clutches.
All parts used in the video are available on this link:
racingdiffs.com/collections/l...
Use RU-vidPromo code to claim exclusive 5% discount!
Subscribe, like and share!
Follow us on social media:
racingdiffs
/ racingdiffs
If you have any questions send us email to office@racingdiffs.com

Авто/Мото

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 60

@omtoa6354 Год назад

Thank you mate, you saved me

@RacingDiffs Год назад

Pleasure being of help!

@fygozanata5139 4 месяца назад

nice job

@GrainGrown 3 месяца назад

My E32 got stuck in the snow today, even though it has the 188 LSD diff. When looking at the rear tire on the driver side when trying to accelerate, the tire didn't turn at all while the other one was spinning. I think it might be time for a rebuild... Trying to figure out what pack I should choose, just the service pack or some of the Stage packs? I'm gonna watch more videos about this.

@YJ-cv2kx 2 года назад

Do you have those smaler shims for sale?

@SpencerAndFAM 3 года назад

Does this apply to the rear diff for the MKZ / Fusion Sport setup recently shipped? Thank you!!

@RacingDiffs 3 года назад

The logic is the same 👍🏻

@63motorsportsinc.37 2 года назад

Hey mates we’re looking at rebuilding an AMG LSD and putting it into a 2012 C63. We’re about to inspect the clutch packs do you have options for replacement?

@RacingDiffs 2 года назад

We should have them in stock. Please send pictures when you open the diff to office@racingdiffs.com just to confirm.

@denisnovacek8428 2 года назад

Do I need to use the “saver plate”? I dont want to. I just want to put everything in at my garage and not worry with finding some professionals who will trim the ramp for me

@RacingDiffs 2 года назад

Absolutely not necessary if your pressure plates aren't damaged from previous clutches.

@johnsmith-gm4kf 2 года назад

What lsd diff for an e83 3.0i automatic 3.64 ratio 188K or 188L ? since i swapped this diff into my e46 to get lower gear ratio

@RacingDiffs 2 года назад

If you are asking for conversion kit, you will need 188L for it.

@lobotomyy 3 года назад

does this also work for nissans r200? because shimming only works for approx 200 kilometers then its back to normal

@RacingDiffs 3 года назад

We don't have clutches for R200 diff. We do have upgrade pack for R180. However we would live to make upgrade pack for factory R200, if you would provide samples.

@xx_emilis_xx6638 6 месяцев назад

Hey, tell me everything you can offer for my bmw e61 530d 2004 with an aut. gearbox

@RacingDiffs 5 месяцев назад

Right now, we have LSD conversion kit to offer. You'll be needing 215K type. racingdiffs.com/products/bmw-e46-e90-e92-e39-e60-lsd-conversion-set

@ThebestTrustEurope Год назад

When my preasur plates are okay and not damaged musst i use also the 0,5 plate or can i built it without the 0,5 plate . Pls anwser fast i built it now 😅 Sorry for bad english

@RacingDiffs Год назад

If they are okay, you don't need to use Ramp saver shim.

@AndreH5656 Год назад

188mm = 2.93 diff from 328i E36 right? I have LSD diff in my 328i but its slipping a lot

@RacingDiffs Год назад

It is time for clutch replacement then. I would recommend at least a Stage 1 upgrade. If you hurry up, you can still catch 30% OFF. racingdiffs.com/collections/lsd-clutch-plate/products/bmw-188mm-lsd-differential-clutch-disc-inner-plate-repair-kit

@Wrappedinadrift Год назад

How much lock up is stg 2 with 4 clutches? Is all I need is the stg 2 kit to install?

@RacingDiffs Год назад

Stg 2 brings 50% lock. It is plug and play. Everything comes in the set.👍🏻

@mazila1108 5 месяцев назад

is everything the same when it comes the 210mm large case? No machining to the carrier cap needed when adding extra clutch disc(s)?

@RacingDiffs 5 месяцев назад

We have sets for 210mm diff that are plug and play too. Check the video below. You have the link to the product in the description. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--Y7LcZj9fbM.htmlsi=JFNPsMbSF-cKgi8k

@macgroober1396 8 месяцев назад

For the last step where you have to press the "cap" down, how should the lsd be oriented in the press? In other words, the press should be pressing down on the cap, but how should I hold the lsd at the bottom? Obviously not the VSS gear, not the body of the lsd...???

@RacingDiffs 8 месяцев назад

Put the inner bearing cone under the LSD core so you dont damage bearing.

@macgroober1396 8 месяцев назад

@@RacingDiffs I don't understand. Is there a picture or video somewhere that explains?

@RacingDiffs 8 месяцев назад

@macgroober1396 browse through our other videos, I'm sure you will find an explanation. Or reach out to our support team at office@racingdiffs.com

@valentinlukanov2358 3 года назад

Hello does the diff on 535d lci and the m5 e60 are same type

@RacingDiffs 3 года назад

Not at all. They are completely different. That is why we made conversion set for 535d.

@valentinlukanov2358 3 года назад

Could you email me with pricing details on valentinlukanov@gmail.com

@TeamGloriouZGB 2 года назад

Is this also possible on the 168mm diff?

@RacingDiffs 2 года назад

Something similar, yes. www.racingdiffs.com/collections/lsd-clutch-plate/products/bmw-168-mm-lsd-clutch-packs

@user-cs4jr4pv6g Год назад

Witch oil do you recommend I a E30 188 differential? I seen different people use : Motul 75w140 synthetic or Motul 90PA SAE90 mineral

@RacingDiffs Год назад

Is it open diff or LSD.

@user-cs4jr4pv6g Год назад

@@RacingDiffs it’s an LSD differential and used for track only

@RacingDiffs Год назад

Motul Gear Competition 75w140 👍🏻

@GrainGrown 3 месяца назад

I remember using the 90 oil for a while on my E32 188 LSD and the diff got loud on slow turns. I switched to 75W140 and it was quiet again.

@RacingDiffs 3 месяца назад

We recommend Motul Gear Competition 75w140

@ThebestTrustEurope Год назад

Hoe can i rebbons 0,25 mm the plates ? Wich with tool ?

@RacingDiffs Год назад

The best way is the surface grinder.

@jacksonhilts5866 Год назад

The 8 screws holding in the clutch pack are incredibly tight and soft. I just rounded a hex out trying to remove. What to do now...

@RacingDiffs Год назад

Get a 12 angled star, often used in VW tools and hammer it down. Like torx key but much sharper.

@jacksonhilts5866 Год назад

@@RacingDiffs this worked on 6 of 8. Sadly the final two i think may need EDM. I even broke an extractor off in one.

@jacksonhilts5866 Год назад

@@RacingDiffs just hope i have not scrapped my diff.

@RacingDiffs Год назад

Get your diff set in the hydro press and press it like you are installing new bearing. That will neutralise preload on the cap. Helps removing bolts.

@jacksonhilts5866 Год назад

@@RacingDiffs Good tip. I ended up having to mill one of the bolts out. All good now though. upgrade to nice 10.9 hex heads.

@janisozolins8995 2 года назад

Are you boys machining of them 0.25mm each side? Is it possible to send them and how much machining work would cost...tnq!

@RacingDiffs 2 года назад

Yes, both for 0.25mm. Please drop email to office@racingdiffs.com

@thibaultdemuth2585 Год назад

Hi, Can I cut just one ramp of 0.5mm and 0 for the other ? Sorry for my bad English

@RacingDiffs Год назад

Not recommended as you will thinner hardened layer too much.

@thibaultdemuth2585 Год назад

@@RacingDiffs even if I rework with a professional machine? because I only have one ramp damaged, the other is like new.

@RacingDiffs Год назад

No matter. Hardened layer is 0.7mm thick so it is better to do both of them for 0.25 than one for 0.5.

@thibaultdemuth2585 Год назад

@@RacingDiffs okay thank you so much