No video :(

BMW RANDOMLY STALLING? FIX IT NOW P0340 P0344 Intake and Exhaust Cam Sensor DIY

Подписаться 198 тыс.

Просмотров 110 тыс.

50% 1

This DIY shows you how to replace both the intake and exhaust camshaft sensors on the m54 engine. This video applies to many models with the m54 and m52 engines (e53, e39, e46, e83, e60, and more!). A bad cam sensor can cause random stalling, check engine lights, misfires, hard starts, and more. Make sure you replace the sensor and the o-ring when doing this repair. #bmwrepair #bmw #mechanic
Support my channel by becoming a member using this link: / @shoplifetv
My Amazon Store: www.amazon.com...
Buy My Merchandise: www.shoplifetv.com
Ask me a question: www.shoplifetv.com
Request a Shop Appointment: www.shoplifetv.com
Instagram: @ShopLifeTV
/ shoplifetv
My vlog channel: / shoplifevlogs
RU-vid Business Inquires: Email me amotorwerks@gmail.com
Disclaimer: Some links will contain affiliate links. Due to factors beyond the control of ShopLifeTV, I cannot guarantee against improper use or unauthorized modifications of this information. ShopLifeTV assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ShopLifeTV recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ShopLifeTV, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ShopLifeTV.

Опубликовано:

24 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 194

@austerace Год назад

I just love the giggles when you start by saying, "you have to feel for the hole" Brilliant!!! I've always maintained the we'd make great gynaecologists, as much of our work is done by feel and mental imagery. I worked for a number of years in a Fiat dealership, the English translation,, from Italian, on every oil filter was: "lubricate ring and screw until tight" so many laughs were had. Never lose the schoolboy, or girl, sense of humour. I laughed out loud when you two got the giggles. Thank you for not editing it out 🙂

@iljakozlovskis3321 3 года назад

Before you "Fish the wire out" make sure you attach a lose wire to the connector with a duct tape and pull it out. That way you can re-attach the connector of the new sensor simply pull the other end of the lose wire to feed the new sensor connector with lead in the exact position of the old one. Work smart, not hard

@pieterlastname1276 3 года назад

Very good idea. Do u perhaps know the reason for this? I changed exhaust camshaft position sensor and the error codes never cleared.i have reset tool but the error reappears?

@anxiety3681 2 года назад

You sound like an electrician

@iljakozlovskis3321 2 года назад

@@anxiety3681 sr. Electronics engineer, but I still do a lot "hands on" at work and have fun with my car 😀

@rj3661 2 года назад

thank you good sir

@adaneryurbina-cruz3843 2 года назад

Wow genius 👏🏿 😶

@justinaguila3498 3 года назад

Just got an E46 and ur videos are like Ned’s Declassified School Survival Guide (e46 edition). Thank you 🙏🏽

@ShopLifeTV 3 года назад

Congrats on the new car! Thanks!

@Eastbayfitteds_ 3 года назад

😂👍🏾

@zmanwithfire 3 года назад

I'm so glad you're still making these videos!

@JP-st8sf 3 года назад

Had this same issue. My e46 (M54) was shutting off on the highway and ended up being the crankshaft sensor

@jtaylor4027 3 года назад

I've had my 2001 BMW 325i for about 6 years, I'm not a mechanic but with your videos I've never had to hire one. Ive fixed everything from fan clutch, thermostat, electric fan, cooling system, all sensors and brakes. Thanks man. One question: Does the 2001 325i have the electric vacuum control valve that connects to the check valve? Can't get a positive answer from anyone. Thanks again.

@7igerpr1nce 2 года назад

01 325i is the best vehicle I've sat in..what a pleasure

@drewdittmann3275 3 года назад

I have been having this exact issue with my E46 wagon for years can't wait to try this out over the holidays

@goldenthang 3 года назад

Did it work mate? Mines been doing the same.

@xoxxxooxx Год назад

@@goldenthang what did you do?

@goldenthang Год назад

@@xoxxxooxx sold it.

@ManDanielJames 3 года назад

This most definitely helped .. from removing all the parts to get to the sensor itself., to installing ... great video thanks 🤩 😁

@NevilleHayfield 3 года назад

Damn bro. Your videos are 👊💪🔥👏. I got p0340 code and isn't the camshaft position sensor. No power lower speed, hard starting. Driving me crazy. Can't get to work 🤯

@rolac6109 3 года назад

Today I worked on my m52 and replaced both inner heater hoses ,man that intake is a back killer to remove and put back. 😂 8:36 lmao those elbows are ashy

@borilopez8581 3 года назад

This guy deserve more likes and subcribers thank you for ur videos

@AutomoTom 9 месяцев назад

Great video, will be replacing the cam and crank sensors on my E46 this week.

@MrJaz8088 3 года назад

You are the one that showed me to Unclip the Mass Air Flow Sensor, and this time you removed the hose clamp, the long way, poor boy must be stressed

@holybasil155 3 года назад

check this, i had a crank but hard start. Changed oil filter & regulator/engine temp sensor/crankshaft sensor/fuel pump respectively, doesnt fix my issue. Switched the camshaft sensors between the intake and exhause, turns out i have a bad intake camshaft sensor. So now the bad one is in the exhaust side and the car starts fine.

@scottharris7338 2 года назад

GREAT VIDEO! YOU EXPLAIN THINGS VERY WELL. TWO THUMBS UP!

@ShopLifeTV 2 года назад

Thank You Scott!

@mansoerdelong9598 Год назад

Thanks for video I'm having same problem with my e46 which also gave a code for cam position sensor

@KILLDEADPEOLE0928 3 года назад

Thanks dude. I brought a 2000 323i sedan and loving it. Haven't had any issues stalling! Still getting the p0340 tho

@pieterlastname1276 3 года назад

I have the same thing but using another scanner read that the exhaust sensor is the problem not the intake cam sensor which I changed 3times oem.good luck

@dealman3312 3 года назад

Awesome video. If you are getting the code but almost never any noticeable symptoms. Can you get away with not replacing it?

@plutoisacomet Год назад

Two years later, I still laugh at the "Feel for the hole" commentary.

@gso4469 2 месяца назад

I have a 2000 Z3 with a 2.8l. It's kicking my ass trying to figure out why it went from running perfect, to misfiring and running horrible and not even drive able. I changed and checked: Both Vanos Intake and exhaust cam sensors New plugs New coils New MAF DISA is fine, holds vacuum Fuel pressure is rock solid, even when running like shit. Smoke checked and NO vacuum leaks.

@roberthooker9095 Год назад

Hey my guy appreciate the video but i need to ask a question i have a 2004 bmw x5 3.0 i have changed the cam sensor and im still getting cam code what else could be the problem other than timing

@Wrofeel Год назад

i have the samo problem, did you get it?

@mesho5270 Год назад

Bro did you find out what the problem? Because I have the same issue 😢

@fvhitman4hire 2 года назад

Great video! Any chance you could do a video on the S54 procedure? I understand its located behind the engine as opposed to the front.

@e46nit46 3 года назад

What up, J!? Been a minute since I popped in. Glad to see you are still at it. Hope the shop has been doing well and thanks again for all the vids!

@MindHunger Год назад

Thanks for this video, I just used it to replace my intake camshaft sensor. BTW as long as you are there, you may as well replace the intake VANOS solenoid as well. It's a wear item and it has to be removed anyway,

@bazosmarek7981 Год назад

what are symptoms of vanos solenoid not working correctly?

@oidoubleu 3 года назад

You should promote your merch with pictures included in the video, love the videos!

@sethterry5232 Год назад

2000 323ci. Replaced inlet cps and exhaust cps and the crankshaft position sensor and still having the stalling issue.

@friguy4444 3 года назад

Always love your helpful great content. Thank you! I have had and I believe many people have a problem with mt S54 on my M3 stalling out often when I put the car into reverse as well once the car is hot and been running for a while the car just stalls out. Ive tried to figure this out as have many others. I can tell the change comes as soon as I put the car into reverse don't even have to use the clutch. The car starts stalling when i put it into reverse and it's idling. I had a BMW indie shop look at the car and try to figure out whats wrong. They checked the idle control valve but that wasn't the problem they did a software update and no good. My car is a swapped out 2002 330CI to a 2006 M3. Maybe that is part of the problem. As well when the car is hot and I push in the cltch and let the revs fall to idle it will just stall out even if the car is moving (Not in gear mind you). On and on it goes. LOL.

@zamapon 4 месяца назад

Excellent and work smart, bro

@eliseol.6788 3 года назад

What happened to bmwselena

@oldduck887 10 месяцев назад

Did both sensors on my 2004 Z4, M54 3.0 engine. Similar but different. The intake sensor was the easiest. The exhaust sensor was very difficult to get to, too cramped of an area. Once I got it out I struggled to get the bolt started in the new part, I decided to take the electric fan out. Should have done that to begin with, one plug, one screw and one expanding rivet and the fan comes out. Anyone doing the exhaust sensor on a Z4, save yourself some frustration and remove the fan first.

@LeverThis 5 месяцев назад

8:56 ... LOL ... the frustration is real ... we've all been there

@ioncroitor7836 3 года назад

It couldnt be better explanation on all your videos, well done What diagnostic do you use for you bmw's ? Thank you

@kitana3977 Год назад

Those 2 13mm bolts definitely need a thread sealant. BMW in Australia uses Loctite SI 5970. $45 at BMW dealer only

@JMUDoc 2 года назад

These can fail "soft" without throwing a code, and they are so ridiculously cheap and easy to replace that they should probably be the first line of attack in cases of poor low-rev responsiveness. After vacuum leaks, of course - owning an M54 is basically one long game of "chase the vacuum leak"...

@cman8956 2 года назад

I’m deep in that game😭

@afortunado81 2 года назад

I have a 2012 BMW X5 I just bring it from Dallas TX to North Dakota , on the Hwy everything was very good, but went the cold temperatures start going to cero by Fargo nd the car stars with issues, low engine oil, low coolant and losing power as well , so I stopped in a gas station and get oil and coolant I was 2 hours away from home, luckily I made it safe, next day my wife took it to the grocery store and the car stars showing a lot a codes like battery needs to be Replaced and 4x4 needs service and misfire codes and camshaft sensors too. I’m just replace the battery already but I’m very confused with this camshafts and crankshaft sensors, can you please provide a part number for each sensors I need for this vehicle 🙏

@edigduarte7575 3 года назад

great job , wish you were here in Chicago to bring my 325 to your shop

@barbmorris8897 5 месяцев назад

Is the intake sensor and exhaust sensor made the same. Is both sensors identical?

@e46anas 3 года назад

great video 👍i hope they are some news about the e30 coupe project

@ShopLifeTV 3 года назад

Thanks! We will have some upcoming videos on the e30!

@danielbrown543 Месяц назад

What causes a drop in power or cut out of power and no rough idle

@adrianlala5044 3 года назад

O boy u know that frustration

@lp2565 3 года назад

Great video. Thanks for sharing!

@noneya96 5 месяцев назад

Can the e cam sensor oring fail and give a oil leak on to the bottom radiator hose closer to the top by thermostat

@nadhirnaidoo9500 Месяц назад

Good afternoon Sir. I've been watching this video of yours. My car cut out in the drive. The engine swings but doesn't want to start. After about 3 days it'll start but when you drive about 15 to 20 km it cuts out and then it doesn't want to start again. I have a 1995 BMW 318i e36. I really need your help please.

@danielbrown543 Месяц назад

Drop in power is on a z3 2002 13:57

@Pinoy4anime 6 месяцев назад

is the intake and exhaust cam position sensor the same part?

@monkfoobar 3 года назад

What is it about the sensor that goes bad?

@maxbradley9534 3 года назад

Who makes these OE sensors?

@renolauzon2614 3 года назад

I've heard BREMI but I'm not sure

@bobirvin7991 Год назад

My 32mm fan clutch wrench is RUINING the solenoid metal! It's chewing it up AND I have zero rotation of the solenoid!! Im stuck! Ive applied BP Blaster. No progress! Just metal shavings! Is there another screw or bolt holding it in??

@johnicesmith-lj1yg 4 месяца назад

Where on the 2012 X5 V8 twin turbo motor those sensors be ?

@S7midnight 3 года назад

Hey 👋 I had a problem with stalling in m52, but it was the crank sensor problem. The symptoms for cam sensor is that you have to crank it a bit longer when starting and noisy injectors. Also could you explain why you don't recommend aftermarket sensors?

@xoxxxooxx Год назад

They can break more easily I guess oem fits the best and last longer

@ulf-dieterkoepp7865 Год назад

I had that nightmare. P1078. Exhaust timing valve sensor. My Juke stalled on the road on way to work. I was driving bumper to bumper. Ended up being towed back to where I stay. Waiting on the outcome of testing both the camshaft and crankshaft position sensors.

@S7midnight Год назад

@@ulf-dieterkoepp7865 I've been using OEM as well as the cheapest I could find. Both work identically and last the same. The last original one lasted 1.5 years, but surprisingly they gave me back the money for this one 😃

@ulf-dieterkoepp7865 Год назад

@@S7midnight wow.

@S7midnight Год назад

@@ulf-dieterkoepp7865 😎

@josebautista5582 Год назад

Thank for the video… exactly what I needed!!! Subscribed!!!

@josephlewis1823 2 года назад

Just watched your P340 RnR, 02 325ci M54, great video and enjoyed the sexual references installing the exhaust sensor, good humor lol

@tonboy8518 3 года назад

Pls do a DIY on MAF troubleshooting - my car drives perfect with MAF disconnected. When i connect it wont even start eventhough i have replaced it with a tested and working OEM part (from a junk yard).

@stumpmtsr 3 года назад

My camshaft exhaust sensor went out on my 2008 535xi and it shut the car completely down. It's like my battery died or something.

@Tyquaviious 11 месяцев назад

Did the replacement of cam sensor work?

@martymeyer4125 3 года назад

Another helpful video by ShopLifeTV

@soinite Год назад

Excellent video! Thank you so much!

@bmxican1023 2 года назад

Is there anyway to decipher between intake and exhaust side sensors throwing the code? Thanks again for the video!

@Skyy3000 3 года назад

Just want I needed.Merry christmas from Orlando

@tweedjohnny8740 3 года назад

You are the best BMW channel. I have things i have fixed things on my 2001 325i & i can't get the lights on the dash. Could you please have help as i have seen many videos & its all shade tree mechanic bull shit. You will be helping many others as well young man.

@tweedjohnny8740 3 года назад

Iight to go off.

@ingegneriafacile 6 месяцев назад

Hello I do have p0340 after head gasket job, I bought a brand new sensor, do you think o should retime the engine? The timing was perfect when I did it, with the 2 tools perfectly fitted, and also after turning one time the engine by hand

@fabriziop7397 5 месяцев назад

My bmw 116 iwhile driving, the engine suddenly stops. the car has 282,000 km and I have never changed the 3 sensors. I believe they are to blame for this inconvenience. what do you think?

@juerbert1 3 года назад

Well explained, thank you !

@zachayfoster94 3 года назад

Can you show and or demonstrate on the n62 4.8

@dubaivlogs5342 Год назад

Hi My E90 330i 2008 automatic, After running 30 40 km ,when I slow it down for signal or humps it’s engine get turned off then if I restart it will restart and running smoothly What is the reason?

@armandohilario 3 года назад

Can you show me how to change the engine oil pan gasket BMW X5 2002 3.0i e53 m54

@bobireviews6309 3 года назад

Excellent video,thanks!

@MrJaz8088 3 года назад

Very recently i cleaned the idler valve, and accidently unplugged the intake cam sensor, car stalled when idling and coughed and spluttered while in low range

@Khalat84 Год назад

My BMW has a rough idle The car makes a sound like shots are being fired. The whole car just shaking and then just goes off. I need your help please BMW, E 46

@yunbow5630 3 года назад

HI, I have the P0339 on my M54. Would you please give me some guidance on that? Thanks so much

@vinzentlohberger8685 3 года назад

Works on 90s, 2000s BMWs for over 5 years. Still uses sidecutters to get the intake airduckt clips out. xD No offense, just reminds me of myself xD. Them darn clippullers cost almost 5 bucks, money better spent on gas. xD Love your vids Keep it up.

@MenaceIISociety223 Год назад

I’m getting no crank at trying to start up my 2001 330i changed vacuum lines, cracked air box and air intake boot would this help with any of my problems or the EML light

@yoelpm Год назад

Is it possible to have a sensor problem but no error messages when scanning?

@gintsas159 11 месяцев назад

most important place of the video blurred so much :D

@AndyNav1 2 года назад

Hi and thanks for the video. Would you please tell me if these sensors are also called Crankshaft pulse generator? That's on M54. Thanks

@nazrudinmohd9852 Год назад

i had bmw e90 320i N46 engine. Car cranks but not start . Scan and prompt camshaft sensor inlet. replaced the sensor but no start/ check signal voltage its 10V.may i know whats happen?Any advise?

@jonowen6612 3 года назад

Great video. Thanks so much!

@adamb50 2 года назад

What is the part number for the hex screw using on cam sensor

@diamanteideias6580 3 года назад

hello my dear, so can you tell me if it’s very harmful to walk with 1 connecting rod i have an e46 328 i'm in love with it

@jdamore44 Год назад

I had a long crank- barely start condition. I've had intermittant CEL's for intake cam sensor, but no CEL this time. Could it still be the ICPS?

@krzysztofp7846 3 года назад

THX BRO , the first one was intake or exhaust one?

@AndyNav1 2 года назад

Pleeeeeeeease help. Following the steps here, when I took out the exhaust side cps I managed to push the O ring into the engine. How big a deal is this? I was tired and not very careful at time.

@bend__ 3 года назад

Are these sensors also responsible for like when an M54 stallls for like a second and then continues to run? like when your idling at traffic light and you hear and feel it stall, lsee the rpm gauge drop, like it shuts off and then it picks up again?

@lanehart3486 Год назад

I’ve got the same issue with my m54 id like to see if that’s the issue so I can go ahead and change that part

@jomarpainting.elmilusos376 2 года назад

Hey me bmw 530 is misfire 4 the code is p1349 I speed it up and it doesn't respond it turns off

@sbrave 2 года назад

2000 328CI, 134k miles. I got a P0340 code after changing my pre-cam 02 sensors with new BOSCH sensors. I cleared the code and it didn't come back, but I've noticed the car in general can take a few cycles to start up, and the acceleration is not so great, especially when I floor it on the freeway. I feel like this car should be a lot zippier? Should I still replace 1 or both of the sensors? Thanks for the great videos!

@josenoriega4324 2 года назад

What would you do if you have all 4 sensors errors? I have a e65 2003 4.4lv8 with all four camshaft sensors reading high voltage?

@user-ly4uq1ho4h 3 года назад

Do you have a video on solution for the fuel trim bank error

@ShopLifeTV 3 года назад

No we don't yet. If you need help diagnosing go to www.shoplifetv.com

@todoalison2718 3 года назад

Check this out. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4CcwtaIe5c4.html

@AAgoncillo Год назад

hey How much will this service run ?

@LilHonda97 Год назад

Ok... so... I get p1343, p1345, p1351... but these codes are also triggered by the CAM Shaft Sensor... what's the actual cause to these codes... I already replaced 4 days ago, new fuel injectors, new disa valve, new coils and sparks and than a couple hours ago MAF Sensor, annnddd cleaned the ICV... WHATS REALLY CAUSING THESE CODES? 2001 330CI M54, MAN TRANS.