BMW Roof Airbag Replacement F30 (2012-2018) 320i/325i/335i 

That’s gotta be a sweet ride!! I am glad it helped! Thank you for watching my video 😊

Appreciate you watching my video! Glad you enjoyed it!

@@jesuslararodriguez2985 if you have an error for a seat belt it could mean the pretensioner is deployed on one of the seat belts, and if you haven’t replaced it or reset it yet I would recommend doing that. But first see if you could get the DTC code for the actual error using a professional scanner, any mechanic shop should be able to scan it for codes and either print the report for you or tell you what the codes are. If you do get your hands on the code message me on instagram or TikTok and I will do what I can to help! Thanks for watching 🙌🏽

@@brownsburg.motorsports I think the pretensioners are not bad since the belts work perfectly, even so I will do the reset with the diagnostic machine and I will get the code if I can't solve it, I'll tell you something, thank you very much for your attention.

Thank you for checking out my channel and watching my video! Glad it helped 😄

It is when you don’t know what you’re doing 😂 glad the video was helpful and thank you for watching 😊

Thank you!!

Try to use a flat head and come at it from the side so remove the weather strip and with a light see if you can see it and push it a bit and that should release it and it should come out just be careful if your airbag is not deployed try and push it a side a little so you don’t damage it

No there is no need to program any airbags!

Thank you for your input we will keep that in mind for our next videos! Thank you for watching!!

Thank you! I got it from BMW Dealer!

You are most welcome! Glad the video was helpful!!

You won’t need to replace the SRS module basically just the deployed airbags and I am sure at least one seat belt would need to be replaced depending on which airbags deployed, glad the video was helpful and thank you for watching!!

thank you for replying Omar. Do you think I need to replace the airbag sensor behind the bumper as well?@@brownsburg.motorsports

@@frankwuolukka2087 if it’s damaged yes or if it threw a code otherwise you don’t have to!

Wa Alykom, BMW modules do not need to be replaced after an accident just a reset with a professional scan tool and the crash data will be cleared and the Airbag light will go away! Thank you for watching!

@@brownsburg.motorsports thank you habibi🤝

Are you talking about the rivets or the parts attached to the airbag?

The ones attached to the airbag. I talked to the dealer and they confirmed they come with the airbags@@brownsburg.motorsports

Yes this is the perfect video for it!

It will reset on its own, all you have to do is scan the car and delete the codes and if you don’t have a professional scanner I would recommend taking the battery terminals off for 15 mins and try that!

Yes they should be available at the dealership or even on eBay!

Did you ever find a solution to this problem because I do know that they do not sell the clips by themselves

@CesarHossain-ud8hp no I couldn't find them. Just used the damaged ones. Even the ribbets I couldn't find the exact size so just used plastic ribbets to hold the airbag in place. Not ideal but worked.

There is the tab on the connector that you can go underneath it with a pick slowly and push it up and the connector for the airbag would come off afterwards if you just pull in it gently

I’m talking about air riviter

Yes it’s 100% suitable!

@@brownsburg.motorsportsthank you

On BMW those don’t need to be replaced after a crash, all you gotta do is replaced the deployed airbags and seat belts or seat belt pretensioner and once that’s done the module can be reset with a professional scanner

😂😂😂 will keep that in mind for the next video but The best way to get the clip off is using a hose plier with the circular shaped end starting from the back of the clips pushing both tabs and it comes out!

@@brownsburg.motorsports 😂 got it in the end now i look silly 🙃