BMW Z3 Convertible. How to Replace the Rear Plastic Window 

GRACIAS from Detroit! Your teaching is EXCELLENT - clear, understandable and taking the time needed to see every detail. BRAVO!

SOS un maestro total aprendo mucho con tus vídeos gracias.

The best upholstery channel

Thank you so much, you helped me replaced my 1997 BMW Z3 window. I no longer have water leaking in :) Gracias amigo, God bless

Very good video. I would like more explanation of the sewing used to finish the zipper if possible. Thanks for your work

Very good explanation and great detail. Thank you.

Thank you for this, I have an M Roadster and the black plastic channel has come apart from the window. I know I can do it myself now. You're excellent with your instructions!

Good video, but for someone who has never done this before, it is difficult. I tried it alone, took me like 4 hours. The zipper ripped of from the roof on one corner, so I had to sew it back on hole by hole. Also getting the zipper in and lining it up correctly took me multiple tries. Then the zipper wouldn't want to connect on one spot, that was also tricky. And a heatgun to make the window soft was also helpfull. For the old Z3 tops, they do shrink over the years. So it is the best to get a custom sized replacement window. I send mine in as a sample and the size of the new one was very excact. No wrinkles at all. I recommend bring you car to the professionals who do this as a daily buisness. They do have more experience and know all the tricks. That will save you al lot of time, stress and a few days of your lifetime at the end.🙏

Great content! Very informative & nicely presented. Skilled technician.

This is a very good video!! I was thinking that I would have to take the car in and have someone replace the window, but I think I can change it my self.

Excellent video. TY so much brother!

A great video, I liked listening to your talking explanation! The customer should have had the whole roof replaced because even though you did a great job you can still see the white CRAZY glue he used which spoiled the effect. Thankyou.

LOOKING GOOD BROTHER...KEEP UP THE GREAT WORK!

THANK-YOU SIR FOR YOUR HELP !!

By the way you are amazing I like your work

Awesome video

nice vid, clear slow easy

Great video!

I installed new window and your video was helpful but, I must have started at the right spot because because the top material is bunched up a little on the bottom.

Thank you for providing us with a great video I'm wondering if you can also provide us with the zipper number so that we can perform this job thanks a lot

I'm in the midst of trying to install a new rear plastic window on my '98 M Roadster. Like others, I have had the same failure in my right and left upper corners pulling away. Prior ownership did glue those areas, which bided some time, but that too has failed. It needed a new window. Car sat in storage for 22/yrs, accumulating only 3K miles during that time. It now has 19K and the top is in very good condition, so hate to replace the whole when just the window needs replacement. However, this has been an exercise of frustration. After the zipper slide broke and finding a new one, I've gotten pretty proficient at getting both ends started and zipping towards the first corner - lower right side. Either before the corner, or while trying to make the bend, the zip separates requiring going back over the open portion. Sometimes it closes and I can move forward, most times I need to restart from the beginning. Even if I can move forward, by the times I turn the first corner, it is separated again. Anyone with words of wisdom or tricks of the trade that I can lean on?

Good video 👍🥊

Thanks so much for your demo, very beautifully nailed> If you can please give me some ideas, my car 1998 Mk1 has the same model nothing wrong with the PVC very strong but over since last year to now noticed the surrounding rubber seals top left and right has come off leads to minor leaks and condensation, I was trying to remove to place some black silicon now I am struggling to run through.....where can I buy this new rubber seal runner, please please help me>

where can I obtain just the zipper? I bought a used window that did not come with the zipper

Thank you! Very clear step by step 👍 was it a BMW ORIGINAL window? I am thinking about replacing mine and wanted to know if its worth to pay 350 for the BMW one.

Good commentary. A little constructive advice: please get someone to hold camera for you and get some good lighting. It's impossible to see some of what you were doing. also would appreciate more detail on the sewing.

Why not leave the zipper pull in place? Is this removed for security reasons? I used to have a Triumph TR6 and liked to have the soft top up and unzip the rear window.

Do you know if the 1996 bmw Z3 Roadster has zippers on the rear window?

my Z3 window is stitched in 😳

Great video! Very well done and easy to follow. THANK YOU SO MUCH!

What if my zipper is on the inside of my car and on the outside it is sewn ?

What about If you have just the Frame unglued? What kind of glue can you use? Thank you for an answer

Where did you get the zip up replacement

Where I could get the window but I want it tinted

What kind of plastics do they use for theses windows?

Holla mon ami can you tell how to change the zipper

Where can I get read window kit for my 1992Toyota celica

Hi question where can I buy the same plastic window I have the same problem with my BMW z3 2002

Right at the 4:44 mark you changed camera view and skipped the part of how you got the zipper to connect on both. That was the most important part and you left it out. Why???

What did you get the glue off with?

So I take it I can't just get the plastic window for my 95 325i convertible?? I can't find just the window

Anyone do this in Myrtle Beach, SC?

Where do you get window?

Where can I buy the window?

este video esta en español?

Where you order them?

Why didn't you show them how to"unzip" the old window?

Mine has to replace the whole top ,, the plastic window is sewn in ,, no zipper 😡