Bolt-On Performance Lift Kit for RAM 1500

Подписаться 42 тыс.

Просмотров 17 тыс.

50% 1

BDS Suspension offers next level performance in a moderate lift height with 2"/3" performance coilover systems for the 2019+ RAM 1500 4WD trucks. These 2"/3" coilover systems join the existing 4" and 6" lift options and have been specially designed to improve vehicle capability ride quality and strength. Kits integrate the new FOX 2.5 Performance Elite Series coilovers featuring an aluminum body and DSC adjustable reservoirs for better heat dispersion and easy adjustability.
Also supplied are BDS performance series upper control arms (UCAs), rear dual rate coil springs to level out the stance (3" kits only) and your choice of rear FOX 2.0 Performance Series or FOX 2.5 Performance Elite Series shocks.
As with all BDS lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes BDS’s exclusive No Fine Print Warranty, ESC system compatibility and a 5-year 100,000-mile drivetrain warranty. Upgrade your new RAM 1500 with BDS and FOX.
LEARN MORE: blog.bds-suspension.com/?p=26567

Авто/Мото

Опубликовано:

17 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@thufifamaster255 2 года назад

I just got my BDS 6INCH LIFT on my 20 laramie installed. An its hands down thu best lift ever. Rides way better that stock. Rear fox shocks. I'm on 22x12s -44 offset with 35s nittos ridge grapplers.

@bdssuspension 2 года назад

Really glad to hear it!

@NoLimitsCommemorativ Год назад

Im strongly considering this kit to run LT285\75r18's Geolandar G015's I don't want anything wider than that because of my 30 mile highway commutes, but I also might just level it and run 275\70R18'S to save the extra 9lbs in tire mass. We get snow, tons of rain and hot summers but I also work in a steel mill and need a little more rugged tire. Ended up with 3 flats this year alone on my blizzaks from the soft tire compound on my beater car.

@mauropineda6589 Год назад

I know you stated that it fits up to 33’s but what about 35’s? I’ve seen a few videos of guys running 35’s with this kit but not sure if there’s trimming and if the tire rubs.

@ValOzuna 8 месяцев назад

Since this doesn't lift the entire suspension and basically just stretches up will it affect driveability? Will you bottom out when you hit bumps? Since the control arms are not level and start in the downward motion?

@idontcaresapo8233 3 месяца назад

What’s the best set up for when your driving on the street?

@TACOBR3ATH1 2 года назад

Can these be paired with your guys 4” lift .. would want some coil overs with the 4” system

@CrazyGreek80 Год назад

I second that.

@Wilky365 Год назад

Is this compatible with the ecodiesels? I know the other kits are not compatible unfortunately

@bdssuspension Год назад

unfortunately not compatible with EcoDiesel models

@Heavy-C Год назад

@BDS Suspension what is the reasoning for offering the 3" kit on your website for the ram 1500 rebel with and without the cross members and drop knuckles? Why would you go with one vs the other? From what I've seen once you go 4" your kids usually come with the knuckles and cross members.

@bdssuspension Год назад

Hey James, so the factory suspension geometry on the newer RAMs allows you to add up to 3" of lift based off the factory mounting mounts for control arms, steering linkage, etc so this setup while it does improve overall performance the CV angles, lower ball joints, etc operate at more of an angle, especially during down travel. With the 4" lift kits, we provide new crossmembers, steering knuckles, differential relocation brackets, sway bar extension, etc to correct the suspension, steering and driveline geometry back similar to how angles of a stock truck. Hope that answers your question, feel free to reach out to our sales/tech team with any other questions at

@nabatron21 Год назад

Why is the 3 inch kit more expensive then going with the 4 inch kit?

@Heavy-C Год назад

Because it has better dampers. Most of the cost of the 4/6" lifts are the brackets. They typically come with lower end dampers to keep overall cost down.

@ronsmith9251 2 года назад

How much lift would this kit give a Ram Rebel?

@nabatron21 Год назад

I emailed them and said it’s a true 3 inch system. Said it would get 3 inches of lift. Still not sure if you get 3inches plus the 1 inch the stock rebel lift. Or just 3 inches altogether.