Тёмный

Bolt pitting and rust issues with Moto Guzzi V85TT. 

Kristis LTU
Подписаться 1,8 тыс.
Просмотров 2,6 тыс.
50% 1

Great bike, but cost cutting was made on all of the fasteners and rust prevention

Авто/Мото

Опубликовано:

 

12 авг 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 23   
@gordonlarsson7993
@gordonlarsson7993 3 месяца назад
It's always been like that on Moto Guzzi, any way from the late 1970 . I been a mecanik, and I agree.
@itsallabouttheridekeepingi4449
@itsallabouttheridekeepingi4449 11 месяцев назад
Good 👍 vid mate , unfortunately I cannot seem to locate the titanium bolts in Australia. With go with stainless. Have you through about some sort of plugs , end caps etc to also protect against water and corrosion. Regards Paul
@itsallabouttheridekeepingi4449
@itsallabouttheridekeepingi4449 10 месяцев назад
I checked my bolts , on the rack could only remove 3 , once was either put in two tight or they cross threaded the bolt ? The rack bolts look dull because they a high tensile Zinc bolts , so was going to replace with stainless but not as high spec , so took out 3 only sprayed with WD40 and put back in with plastic caps over holes . Screen bolts were stainless and looked in good shape . I couldn’t get the bolts you replaced in your bike in Australia.
@dwlawson78
@dwlawson78 26 дней назад
Great info.
@1037103710371037
@1037103710371037 5 месяцев назад
Thanks for the vídeo! Can You share details for the bolts on the red tubes on the back? Also, which is The accessory you mounted on the topbox?
@davidzimmermann6086
@davidzimmermann6086 10 месяцев назад
Thanks for the video, how did you deal with the longer brake bolts holding the additional mudguard. Mine are completely rusted, but as it's a 10.9 quality I am not keen on putting stainless steel for the breaks. What did you put?
@ruimendesesousa
@ruimendesesousa 11 месяцев назад
Hi Kristis, I see that you have a comfort version seat. Did you have the standard before? I'm thinking to change to comfort one but I don't find many info on how better is it compared to standard. How do you feel about it? Thanks! Kind regards!
@MultiVogon
@MultiVogon 11 месяцев назад
Moto Guzzi couldn't afford any grease when assembling these bikes, that's for sure. I always blow-out the water from those rocker cover bolts when cleaning the bike, because as you say those drain holes are in a stupid location. I should probably remove my rear rack and check what condition it is inside after a couple of UK winters... :-/
@Kristisltu
@Kristisltu 11 месяцев назад
If its all rusted without any winter driving and only few showers - i guess it will look not the nicest. I have sprayed the inside with dinitrol and called it a day ;)
@Motowanderlust
@Motowanderlust 11 месяцев назад
Thanks for the info, have you consider to use anti seize paste at the bolt threads? It prevents water penetration.
@Kristisltu
@Kristisltu 11 месяцев назад
I add thread lock to all of the bolts i touch. On the Guzzi its especially important as some of the engine bolts have tendency to fall out :)
@tedmarakas2626
@tedmarakas2626 9 месяцев назад
NEVER use Titanium bolts without Anti seize paste. Gulling is an issue and drilling titanium is a real pain in the tookus. @@Kristisltu
@Kristisltu
@Kristisltu 9 месяцев назад
@@tedmarakas2626 yes, always use loctite or similar thread lockers or anti-seize directly ;)
@mariorossi9887
@mariorossi9887 11 месяцев назад
similar problem...also the alternator cover...i do not contact customer care...it is inutil
@Kristisltu
@Kristisltu 11 месяцев назад
Ah, the cover gets banged in maximum 2 months with or without mud guard. Theres not a lot you can do there. Its just poor quality :)
@mdesmit3415
@mdesmit3415 11 месяцев назад
Nice , where did you buy the bolts ? All from guzzi bits ? And do you know the Size’s Greetings from Holland
@Kristisltu
@Kristisltu 11 месяцев назад
Mostly from pro-bolts in UK. Head cover bolts - from guzzibits. But they have very limited supply
@mdesmit3415
@mdesmit3415 11 месяцев назад
Thanks
@mariorossi9887
@mariorossi9887 10 месяцев назад
how many km does the bike have? you still have the original tires? I change the original at 15.000km, with pirelli str, better on dirty road...
@Kristisltu
@Kristisltu 10 месяцев назад
Not many. Im at 13k, but im swaping mine too for the next season. Hopefult with tubless rims too from the facelift. How are they on asphalt? Im thinking of buying Pirelli Angel GT or Scorpion trail
@brentharrington9235
@brentharrington9235 4 месяца назад
Dude it's an ADV bike, it's ok if it's dirty haha. You're right about bolt's though.
@tedmarakas2626
@tedmarakas2626 9 месяцев назад
I replaced every single bolt with titanium on mine. In fact, all my bikes have titanium bolts. Yes very expensive BUT I don't mind, I can afford it. Speaking of horrible and cheap bolts....lok at BMW and KTM. Absolutely terrible. Believe me, Moto Guzzi is far better in quality.
@Kristisltu
@Kristisltu 6 месяцев назад
I didnt see bad quality bolts on GSA, but KTM - yes, that was horrible 😁
Далее
Moto Guzzi V85TT 6000 mile update
13:21
Просмотров 32 тыс.
Oil Change on the Moto Guzzi V85tt
18:13
Просмотров 47 тыс.
V85TT Teething Troubles?
10:24
Просмотров 3,8 тыс.
Improved V85 TT E5+ 2024 Airbox on an E5 Model
11:34
Просмотров 1,1 тыс.
Moto Guzzi V85TT Ownership Experience | Review
12:38
Просмотров 69 тыс.
Moto Guzzi V85 TT - Lessons Learned Review
10:42
Просмотров 180 тыс.
The Moto Guzzi V85 TT | The Gentleman's Explorer
19:46
Просмотров 235 тыс.
Alaska on A Moto Guzzi?
8:37
Просмотров 1,1 тыс.
Personalized Resin Gear Shift Knob 🚗✨
0:56
Просмотров 2,5 млн