Bontrager transmiter remote connection setup 

Hello, just saw this. The middle button acts as an Emergency light. So that means whatever setting you have, if you click the middle button, it will default to the brightest light for you to see and ovoid an obstacle. If you click in again it go’s back to what you had. I’ve just check and you can ride with steady low beam, then if you click the middle button, it will activate the highest steady beam. Unfortunately you can’t toggle through the steady/solid mode without passing the flashing ( which is illegal in some countries such as Germany 🇩🇪 to my knowledge). So that is the only hack. Choose low beam or medium, then if you need extra light hit that middle button.

I don’t have a garmin. Only a wahoo. But I do know that some Garmin computers connect to the light. You will have to see the manual instructions that came with your Garmin or on the website.

No

As of yet, No I have not :)

Unfortunately not. Only this remote or a Garmin GPS/computer device.

Unfortunately not. Maybe through a Garmin gps unit. But I’ve got the Bontrager transmitter remote, and nothing on there states that I can set it up as Turn signals.

@@abbreviateTome I'm waiting on the reply from Trek cx support. The description of the Transmitr remote on their site, clearly states it can be used in combination with Flare RT to use as turn signals, however I think that description is meant for the discontinued Flare RT (non-square oval model). Thanks anyway!

Hi, the short answer is Yes you can. Although I wouldn’t recommend it because the flap is open and you expose it to the elements dust or rain. Also I do not know the Ratio of charging to discharge while the light is ON. maybe it will prolong its deletion and maybe it will charge it to full capacity.

@@abbreviateTome Many thanks for your response. That is a big advantage over the GARMIN UT800. You cannot reload it when it is in operation. The lamp goes off. Whether the charging current is sufficient to fully charge the lamp while driving is also not the priority. The main thing is that the lighting time is extended a little!

Unfortunately not. Its fixed on with an allen key. The remote and mount are one pice. It would had been good to have a quick release system, like the light, for when someone pops into a cafe for a short while.

Yes you certainly can. I removed mine off of the mount, added a bit of velcro to the bottom, and stuck it out of the way on my top tube. Keeps the bars from being cluttered.

Selam, İzlediğiniz için teşekkürler. 4 kez Turki'ye gittim ama hiç bisiklet sürmedim. Maalesef türkçe olmadığım için google translate kullanıyorum.

This remote has been discontinued unfortunately. You can find it on the U.S website still in stock.

It uses a non rechargeable battery. CR2032

Sure, you can un-save and then re-pair it in a different way. Choice is yours.

Hi, When you click the middle button it acts as an emergency light and switches to the highest steady beam from whichever mode you’re on. Click it again and you’re back to your original setting. Other than that, it needs to be toggled.