Bosch ConnectModule - Installation | EBIKE24.com

Подписаться 1,3 тыс.

Просмотров 22 тыс.

50% 1

► Order the Bosch ConnectModule retrofit kit: www.ebike24.com/bosch-retrofi...
The #ConnectModule is one of the most important innovations for the #Bosch Smart System for the 2023 season. GPS trackers with alarm systems have been offered by other companies for years. Bosch has now caught up. Using a current KTM model with a Bosch Performance Line CX motor (Smart System), we show you step by step how to install the anti-theft system.
If you have any questions, please let us know in the comments.
-- More information --
► Order the Bosch ConnectModule individually: www.ebike24.com/bosch-connect...
► The bike in the video: www.ebike24.com/ktm-macina-sp...
► Read more about the installation in our blog: www.ebike24.com/blog/ebike-bo...
00:00 Intro
00:22 What features does the ConnectModule have?
01:37 Which motors are compatible with the ConnectModule?
02:40 Mounting on a Bosch Performance Line CX (Smart System)
05:47 Removing the motor cover
07:04 Connecting the display cable to the motor
08:19 Connect the display cable to the ConnectModule
09:24 Attach ConnectModule to the motor
12:01 Attach the motor cover
13:32 Set up the ConnectModule in the E-Bike Flow App
You can find more exciting news in our e-bike blog:
www.ebike24.com/blog/
E-bikes, spare parts & accessories are available in our online shop:
www.ebike24.com/
Make sure to follow us on social media!
Instagram: / ebike24com
Facebook: / ebike24com

Спорт

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@aakashmago7728 Год назад

Hello. Thanks for doing the video, it was intensely informational. Will this be compatible with a Verve+ 3 ?

@ebike24 Год назад

Hi and thank you for your kind words! It's hard to say, unfortunately, as some older models do not have the Smart System required for the ConnectModule. Do you know the model year of your Verve+ 3? Often, you can also easily identify it by the display: If your bike has the Purion display (www.ebike24.com/2017-bosch-purion-e-bike-display-performance-line), it is not compatible with the Smart System because the Purion is not yet available for Smart System bikes. Hope this helps! Cheers - Michael

@aerovideos 6 месяцев назад

the Bosch Connect module with a subscription of €40 per year should improve two important points: first of all a “theft insurance” subscription integrated into this subscription and on a technical level increasing the power of the alarm signal which is rather ridiculous

@user-dj2yv1bp7j 11 месяцев назад

Hello, can you please tell me if the module will fit well with a Sunn Rage 2023 bike, CX SmartSystem ?

@ebike24 11 месяцев назад

Hello, and thank you for your comment. Could you please provide me with a link to your bike? I was not able to find your bike through Google, and I am not familiar with Sunn bikes. You are also welcome to send us an email with photos of your bike at info@ebike24.com. Cheers - Michael.

@joelroth4637 Год назад

Will this fit in the Trek Powerfly 4 gen 4 and will the cover fit after installing? Thanks!

@ebike24 Год назад

Hi Joel, thank you very much for your comment. The Powerfly 4 Gen 4 is equipped with the Bosch Smart System and is therefore compatible with the ConnectModule. Based on our experience, the cover should fit after installation. We have never encountered any problems with that on Trek bikes. Best regards - Michael

@RMF721 3 месяца назад

Hello, do you know if it’s possible to fit this module in a Bosch SX motor like the Riese and Müller Culture? If not, are there any plans for an alternate cover that could work with the connect module? Thank you.

@ebike24 3 месяца назад

Hello and thanks for your comment! Yes the ConnectModule also works with the new Bosch SX motor. For the SX motor you only need the single ConnectModule without the mounting accessorries. It is simply connected with an additional display cable which you also need. The ConnectModule is then connected between the motor and the display. We will also publish a tutorial for the ConnectModule installation on the SX motor soon. You can find the ConnectModule and display cable here: www.ebike24.com/bosch-connectmodule-smart-system www.ebike24.com/bosch-display-cable-smart-system You are also welcome to contact our customer service under info@ebike24.com. Cheers - Michael

@aerovideos 7 месяцев назад

I just get the Bosch module Connect and I am very happy with this GPS alarm systèm, but the only bad point and almost a joke is the power of the alarm sound; it will not afraid even a fly...

@mikaellarsson3314 11 месяцев назад

Will it work for the Bosch active that the batavus Harlem use?

@ebike24 11 месяцев назад

Hi Mikael, Thank you for your comment. It is hard to tell because I am not familiar with the Batavus brand. Could you provide me with a link to your bike? In general, I can say that your e-bike needs to be equipped with the Bosch Smart System motor. You can also send us an email at info@ebike24.com with some photos of your bike, especially of the motor and the display. Hope this helps! Cheers - Michael

@PhilipeRomero Год назад

hello! this GPS have sin card? Can I track if the bike have the battery out?

@ebike24 Год назад

Hello Philipe, thank you for your comment. Yes, the ConnectModule features an eSIM for mobile communications. Even when you remove the battery from your e-bike, you will still receive a notification if your bike is being moved, and you can track it as well. However, the alarm will not activate in this case; it only works when the battery is mounted on your electric bike. I hope I was able to help you! Cheers - Michael

@Fabiozne7 9 месяцев назад

Hello, what about cube hybrid 140 action team ? Is it included with brand new or No ?

@ebike24 9 месяцев назад

Hi Fabio, thank you for your comment. This is hard to tell since we are not a Cube dealer. It should fit since the Cube also uses the new Bosch Smart System required for the Module. However, on many Cube electric bike models, there is not enough space under the motor cover for installation. We have a few replacement covers in our store: www.ebike24.com/cube-e-bike-spare-parts If you have any questions, you are welcome to contact our customer service: info@ebike24.com Cheers - Michael

@nickolasreeks4743 3 месяца назад

Hi, I have a Trek Rail 5 Gen 3 Will the connect unit fit my bike? thanks in advance.

@ebike24 3 месяца назад

Hi, according to the specs I found your bike is equipped with the Bosch Smart System. Therefore the ConnectModule should fit. You may want to check if there is enough space below the motor to install the ConnectModule before purchasing. Cheers - Michael

@lobyapatty 6 месяцев назад

Can this be fitted to orbea wild 2023 with the Bosch smart system?

@ebike24 6 месяцев назад

Hi and thanks for your comment. Yes, if your Orbea has the Bosch Smart System, installation should not be a problem! Just make sure that you have enough space below the motor for the ConnectModule. Cheers - Michael

@rephepz 25 дней назад

Hello, what bosch connect module will be fit on my hercules fold r5? And where can i buy here in germany? Thank you

@ebike24 21 день назад

Hello, thank you for your comment. According to Hercules your Fold R5 has the Bosch Performance Line Motor. This means that this ConnectModule is the correct version: www.ebike24.com/bosch-retrofit-kit-connectmodule?number=8565-002 You can order online, we ship to Germany (delivery time is usually 2-3 days). Cheers - Michael

@andreribeiro6204 Год назад

Hi great video !! Is that compatible with Trek Rail 7 ? Perfomance Line CX

@andreribeiro6204 Год назад

I use the Purion Display

@ebike24 Год назад

Hi Andre, thank you very much for your kind words! Unfortunately, the ConnectModule does not work with your Rail 7. The Purion display indicates that your bike uses the "Bosch eBike System 2" and not the Smart System. The ConnectModule is only compatible with the new Smart System. However, if you are still interested in a GPS tracker, I can recommend these two options: www.ebike24.com/powunity-bike-trax-gps www.ebike24.com/bikefinder-gps-tracker In case of questions do not hesitate to contact us. Cheers - Michael

@andreribeiro6204 Год назад

@@ebike24 thanks for the answer Do you think if I change my display for the new Purion 200 it will work with the connect module ?

@ebike24 Год назад

Unfortunately, the Purion 200 will not be compatible with your bike. Once again, the problem lies in the drive system. The Purion 200 is designed specifically for e-bikes equipped with the Bosch Smart System. However, your bike is equipped with the previous-generation "Bosch eBike System 2". The software used in these two systems is entirely different, meaning all displays and devices are incompatible with the alternative bike system. I'm afraid that in future product development, Bosch will primarily focus on the Smart System, and there will be fewer product innovations for the previous systems. I hope I was still able to help you. Cheers - Michael

@ateen83 Месяц назад

Is there a way to fit this on a Gazelle Grenoble C5 HMB (Bosch Performance Line Smart System)? I believe the original covers don't fit once the module is installed

@ebike24 Месяц назад

Thank you for your comment! On the software side, the installation is no problem. Unfortunately, motor covers are always complicated and, above all, manufacturer-dependent. I cannot say for sure if the cover will still fit after the ConnectModule installation, as we do not stock any Gazelle bikes in our range. My recommendation would be to contact either your local Gazelle dealer or Gazelle directly. They should be able to advise you on whether it is possible to install the module. Cheers - Michael

@ateen83 Месяц назад

@@ebike24 Thanks for your response. I spoke to my dealer, and he tried sourcing the part numbers for compatible covers that would fit after installation, however he was sent around in circles. Bosch sent him to Gazelle, and Gazelle sent him to Bosch. It seems like getting a concrete answer is going to be tricky, and I'd say it will probably be a no compatibility for now, which is a shame :(

@ebike24 28 дней назад

Thanks for the update. Yes, this has been the problem with Bosch for a while. They will always tell you to ask your local dealer or bike manufacturer and they have to ask Bosch... We offer free returns within the EU. If you like, you can order the ConnectModule and test the installation - if it doesn't fit, you can return it. Maybe that's an option for you. You can find the ConnectModule here: www.ebike24.com/bosch-retrofit-kit-connectmodule Cheers - Michael

@kevinkarjomaa2494 8 месяцев назад

Hi, Can i connect it to my Focus aventura2 6.8 2023

@ebike24 8 месяцев назад

Hi! Yes, your bike is compatible with the ConnectModule according to Focus' specifications. You simply have to ensure that you select the correct motor option since your bike has the Bosch CX drive. Here is a link with the appropriate version for your bike: www.ebike24.com/bosch-retrofit-kit-connectmodule?number=8565-001 Cheers - Michael

@kevinkarjomaa2494 8 месяцев назад

@@ebike24 thanx for fast reply!

@PerfodDk Год назад

ATTENTION: IF you have a CUBE bike , BEWARE,,, Bosch Connectmodule will fit the motor , but the motor cover dont fit afterwards. CUBE is working on a new motor cover but at the moment there is no solution on the problem. i just found out today after fitting the Connectmodule. The item number for the new engine cover is #3819. For the Stereo Hybrid 160 ONLY size S, the article number is #3706

@ebike24 Год назад

Hi PerfodDk, that's right, unfortunately the ConnectModule doesn't fit beneath the cover of some Cube models. However, Cube has released a couple of new motor covers that are compatible with the Bosch ConnectModule or GPS trackers from other manufactures. You can take a look here: www.ebike24.com/cube-e-bike-spare-parts Cheers, Michael

@AlexanderJohnsson-yp9ic 11 месяцев назад

Hello! Do you know if the module can be installed on a Scott axis eride 10 2023?

@ebike24 11 месяцев назад

Hello and thank you for your comment. Yes, your Scott is compatible with the module! Since the Scott has the new Bosch Smart System, there are no compatibility issues. Just make sure to select the "Bosch Performance CX" version when ordering, because there is another version for the Bosch Performance (without CX) motor. Hope this helps! Cheers - Michael

@AlexanderJohnsson-yp9ic 11 месяцев назад

Okej thanks! But when i opened the motorcover There are no plate to attatch the little screw? And Will the motorcover screw go threw with the module there?

@ebike24 11 месяцев назад

@@AlexanderJohnsson-yp9ic The metal plate for attaching the Module is included in the scope of delivery. The screw for attachment is also included. For the motor cover, you can use the original screw. Cheers - Michael

@AlexanderJohnsson-yp9ic 11 месяцев назад

Okej! And where do i attatch the plats then? I had the cover off and didnt see where to attatch the plate.

@ebike24 11 месяцев назад

@@AlexanderJohnsson-yp9ic There is a small rubber holder included in the delivery, where you attach the module. At minute 9:24, you can see how it is mounted. If you are still unsure, you are welcome to send us an email with a photo of your motor and the available connections at info@ebike24.com. Cheers - Michael

@akasha1337 Год назад

Cube hybrid stereo 2023? Can fit

@ebike24 Год назад

Hi and thanks for your comment. This is hard to tell since we do not have Cube bikes in our product range. We know from a few customers that the original Cube motor cover might be too small to fit the ConnectModule. This is why we offer these two updated covers from Cube: www.ebike24.com/cube-motor-cover-stereo-hybrid-120 www.ebike24.com/cube-motor-cover-stereo-hybrid-hpc-my20-23-bcm-ready-schwarz Depending on your bike model one of these two should fit the ConnectModule. If you have any questions do not hesitate to contact our customer service: info@ebike24.com Cheers - Michael

@kennycunn1 Год назад

Hi will this work with a trek rail 9.8 gx axs thanks

@ebike24 Год назад

Hi Kenny, thank you for your comment. Yes, it should work! The Rail 9.8. GX AXS uses the Bosch Smart System just like the ConnectModule so there should not be any issues installing it. You are welcome to order the ConnectModule here: www.ebike24.com/bosch-retrofit-kit-connectmodule?number=8565-001 Cheers - Michael

@kennycunn1 11 месяцев назад

just wasted money on this as after installation the drive unit cover doesn't fit back on@@ebike24

@ebike24 11 месяцев назад

Hi again, I am sorry to hear that. We have had several customers ordering the module for their Trek Rail models, and they never faced any issues. Due to the different cover sizes, it is extremely hard to determine for which bike it fits and for which it does not. If you ordered from our store, please contact us at info@ebike24.com so we can take care of the return and refund as soon as possible. Cheers - Michael

@tumpelo22 Год назад

so it's basically 4 (?) normal torx screws and a thief can remove the module? I don't understand why there is absolutely no security?

@ebike24 Год назад

Hi and thank you for your comment. Yes you are right. Unfortunately the ConnectModule is delivered without any additional safety equipment to protect it from theft. However, since the ConnectModule has standard Torx sockets, you can also use safety screws of your own. Cheers Michael

@aerovideos 7 месяцев назад

Good product but the alarm sound is ridiculously inaudible

@mrpabs5864 16 дней назад

Do i need to subscribe and pay to use this?

@ebike24 14 дней назад

Hello, the eBike Alarm is included in the purchase price for 12 months from the time of activation in the eBike Flow app when the Bosch ConnectModule is purchased. The eBike Alarm Service is not automatically extended thereafter. If you wish to continue using it after twelve months, eBike Alarm costs €4.99 per month or €39.99 per year. Hope this helps! Cheers - Michael

@rickmorty4921 9 месяцев назад

We are protected from disconnecting this protection by 4 slops

@wallaroo87 2 месяца назад

I want to sell my bike, can i just remove the device when unlocked with my phone? The new owner does not want the product. So no i do not want to steal the bike. I am the owner and i can unlock it with the phone. So just uninstal it like i instal it? Or do i need to some specifics because i can not find a tutorial.

@ebike24 Месяц назад

Hi, you should remove the ConnectModule in the Bosch eBike Flow app first and after that also remove your bike from the app. It is crucial to remove the ConnectModule in the app first, otherwise there might be an error message when the new owner tries connecting the bike with his Bosch account. Cheers - Michael

@rickmorty4921 9 месяцев назад

It will take the thief 2 minutes to unscrew it. Why don't you make built-in GPS systems a standard??? Then you could hide them more from thieves.