Тёмный

Botfly 

Buck and Slug Reloaders
Подписаться 2,7 тыс.
Просмотров 3,2 тыс.
50% 1

The new Svarog Botfly slug mold is pretty dang awesome to cast. I had great accuuracy using their sverboy slug mold in the past and this is pretty much similar. Check out their page on eBay for all their lastest and greatest slug designs!
www.ebay.com/str/svaroghunt
Link to Ballistic Products:
www.ballisticproducts.com
Facebook link to Buck and SLug Reloaders:
/ 213522172431808

Опубликовано:

 

18 авг 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 28   
@UnstoppableNick69
You're helping many and I thank you for that.
@michaelrandell4021
@michaelrandell4021 Год назад
You are right Mr. Guthrie. The smoking method is not enough to prep the mold. I used CRC Dry Graphite spray. I found the BPR-12 double ended wad with no pedals a heavier version of the Super Short green wad. I put the X12X, or BPGS under that or the plex seal. To gain my height or the orbatrator in straight wall hulls. I've been trying some different powders
@gruntspy44
@gruntspy44 4 года назад
You are an artist
@psykoklown874
@psykoklown874 4 года назад
I had to dress the edges of the fins on the center pin of my Zveroboy mold with a fine file. It made a huge difference in ease of release
@ClarkesonTheMarksman
@ClarkesonTheMarksman Год назад
Mate trying to get these in the UK is a nightmare
@yankeenimrod2063
@yankeenimrod2063 4 года назад
Great video Leon! do you have experience with the lee 7/8 0z drive key slug ? I've been experimenting with it with a rifle barrel at 50 yards it works OK, At 100 yards it hits point of aim occasionally, but more often than not, it is way off. very inconsistent at 100 yards? any ideas whats going on??
@gruntspy44
@gruntspy44 4 года назад
Beautiful. Any luck for smoothbore?
@italianrelic
How you cast your slugs so shiny? I use pure lead for my slugs and they are kinda dull grey
@fracturedhearts3734
@fracturedhearts3734 4 года назад
He lives!!!!!
@figelski1
@figelski1 4 года назад
awesome video Leon!!!! time to clean the garage though...
@jonleone777
What is the diameter of the cast slug
@mikeseigel6566
@mikeseigel6566 4 года назад
Do you use Vaseline in the roll crimp tool?
@gruntspy44
@gruntspy44 4 года назад
Leon... how do you only have 259 subscribers?
@kingdaddy4200
@kingdaddy4200 3 года назад
How much powder are you using with this slug?
@johnparrish9215
@johnparrish9215 3 года назад
You know if those Russians would make a segmented mold for the 45 Colt I would be more than happy to try it.
@gruntspy44
@gruntspy44 4 года назад
I asked too soon... sorry
Далее
Twister Slug Accuacy Testing
21:42
Просмотров 2,7 тыс.
Powder Coating Slugs
14:24
Просмотров 2,4 тыс.
Secret to A Perfect Fold Crimp
4:18
Просмотров 14 тыс.
3d Printed Bullet Feeder
20:04
Просмотров 676
12 Gauge Slug Drop - Demonstrated and Explained
28:24
How to Load the Svarog Botfly slug
9:54
Просмотров 1,9 тыс.
SW250-12 Slug Wad
10:08
Просмотров 6 тыс.
Ballistic Products Unload-It and Spin-N-Trim Review
14:17
GUALANDİ SLUG 36 METRE GRUPMAN TESTİ
3:35
Просмотров 4,7 тыс.
Finishing out your cast buckshot
11:36
Просмотров 9 тыс.
This just might be the BEST 12ga. Slug we've tested!
17:03
Episode 3... the Svarog Paradox: 3 different Styles!
30:09