So its bad rake shock. meaning the oil orfice is part blocked causing the rake to not drop all the way or bind in the cushion linkage.Thats of course assuming the rake latch is adjusted to the correct distance from the rake shaft around 5/16 inch gap is good, I also question weather the pinsetter was installed the correct distance above the lane surface, Thats why detector having trouble picking up standing pins or someone moved the detector rod.
What i can say the lane is perfectly or near perfectly leveled as it should. Don’t listen to this roblox users they don’t know much about lane level but I do. From experience this is possibly the level that you should have for the lane. As long as the ball doesn’t hop when touching the pin deck it’s good as is
You need to add the ball guide that sits between both lanes and guides the ball onto the return without falling off the return as your having that problem. It’s made of plastic and sits on a post and the ball swings it one way or the other to guide the returning ball onto the ball return track safely.not a big installation. Also your rake is too high. Food for thought
There is one, however, I am just seeing what works best. I have a few mods. I wish I had a heated building to put these in when I removed them from the alley. I would have taken lanes and returns and chairs.
Ill say it again, the pin deck is severely too low. How it was back in this video(Part 6) was perfect: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uY_fwXBYO-k.html . If you remember, you said that the issue with that was that the deck was hitting the pin deck, and that can be fixed by doing Adjustment 14 and then doing Adjustment 17 to set proper detection height.
@@t.c.bowling1934 What I am saying is that you should raise it back up to how it was and then do the 2 adjustments to get the deck adjusted to that height. How it is right now, there is barely a quarter inch difference between strike height and when it is resting on the pins, when it should be an inch and a quarter difference.
