Bravo III Corrosion Remediation & Painting Fall 2015

Подписаться 116

Просмотров 69 тыс.

50% 1

This time around we sandblasted the drive (vs. sanding) and used JB Epoxy to fill the voids. Sanding the epoxy was a pain but results were well worth it. We used the Alumaprep33 and Alodine to prep the bare aluminum, then two coats of epoxy primer, paint and a clear coat finish. We did the Starboard drive last winter, here is the link to that video: • Painting Bravo III Out...

Опубликовано:

9 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@imuayachtcharter7940 4 года назад

Have pitting and want to take care of it? I used this product 20 years ago and it is exactly what one needs to prep after cleaning and before painting. Amazing product. Its a two part Alu and epoxy mixed then applied and sanded smooth Devcon 10610 Aluminum Putty (F), 1 lb. Can

@Sstantial 11 месяцев назад

I hope you changed the water pump impeller while it was out and before doing the paint work. Also, be super careful with Alumiprep and especially Alodine as they have a list of health hazards. Handle with proper gloves and follow PPE guidelines to stay safe! Looks much better!!!

@wayneholland9985 5 лет назад

thanks for sharing...very helpful.

@ohanaboating3053 8 лет назад

Good catch Mark! When we purchased the boat the port side had two anodes on the cavitation plate and the port only had one. I called the original dealer regarding warranty work and they confirmed that one lower unit had been replace - which is why they are now different. I added the propshaft anode on both drives last season. After one full season the starboard drive showed no corrosion and the paint was in perfect shape.

@outofthebluefishing9570 7 лет назад

How was the outcome in the end? And do you boat in fresh water or salt?

@warrenricardo5244 3 года назад

sorry to be offtopic but does any of you know of a trick to get back into an Instagram account..? I was stupid lost the password. I would appreciate any help you can offer me!

@dallaschandler2843 3 года назад

@Warren Ricardo instablaster ;)

@warrenricardo5244 3 года назад

@Dallas Chandler thanks for your reply. I got to the site on google and im in the hacking process now. Takes quite some time so I will reply here later with my results.

@warrenricardo5244 3 года назад

@Dallas Chandler It worked and I actually got access to my account again. I'm so happy! Thanks so much, you saved my ass :D

@jgfyujiyyrfbhkjtrrvhujmbvfref 7 лет назад

Dont sand blast , the silica causes paint not to stick well, use soda blast then alodine it

@jeffclark7972 6 лет назад

Its been a few years, hows it holding up?

@outofthebluefishing9570 7 лет назад

The reason why 2 of the drives where different is because one dive is from a 99 and the other is a newer style. But my question is how did you add a prop anode to the drive that has a single cavitation plate?