Тёмный

Removing Rust/Paint/Algae/Slime off this Dutch barge, Repainting Narrowboat Restoration SandBlasting 

Mick Blackley SandBlaster
Подписаться 36 тыс.
Просмотров 676 тыс.
50% 1

Removing Rust and paint so this dutch barge can be restored! if you enjoyed the video press the like and drop a comment would be nice to hear from you I read every comment and try to reply to everyone 😊
Please be kind and respect the fact these videos are a hobby for me if you want to see more content press the subscribe and ding the bell then you will be notified of my next uploads see what els I blast.
As always thanks for watching much appreciated!
Hard doing for easy viewing :)
If you are a blaster and require help please drop me a message on here. Please don't email or call asking for advice on how to set up or operate your Rig. I need to prioritise my free time doing work calls, emails and quote enquiries. I will always try to respond to comments on my videos :)
kind Regards
Mick Blackley Sandblaster
MobileBlasting.co.uk
M.Blackleys.MobileShotBlasting

Опубликовано:

 

8 июн 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 303   
@boatlover2296
@boatlover2296 Месяц назад
That hull looked remarkably good
@Mobileblaster
@Mobileblaster Месяц назад
Yeah this was in good shape 😊👌👍
@VenturiLife
@VenturiLife 15 дней назад
Paint and bottomcoat did it's job I suppose.
@KASIH3103
@KASIH3103 2 месяца назад
I just knew we were going to see some barnacles being blown to smithereens based on your intro video 😢 Alas, it was not to be. It was another finely executed job showing your skill and expertise. We remain faithful in believing our wish will manifest in the none to distant future.
@Mobileblaster
@Mobileblaster 2 месяца назад
😊👌👍
@ThePorridgeGobbler
@ThePorridgeGobbler Месяц назад
That was very therapeutic watching you strip back that hull. 😁
@Mobileblaster
@Mobileblaster Месяц назад
😊👌👍 glad you enjoyed it
@trumanhw
@trumanhw 5 месяцев назад
Man, it's crazy how perfect it left it. Great work.
@Mobileblaster
@Mobileblaster 5 месяцев назад
😊👌👍
@garymonsarratt6048
@garymonsarratt6048 10 месяцев назад
That was a big job for one guy. You made it look easy.
@Mobileblaster
@Mobileblaster 10 месяцев назад
😏😊👍👌
@cstar2839
@cstar2839 Месяц назад
Very satisfying and therapeutic to watch. 🙂
@Mobileblaster
@Mobileblaster Месяц назад
Glad you enjoyed it 😊👌👍
@glennchapman5337
@glennchapman5337 11 месяцев назад
That's mint, lovely job.
@Mobileblaster
@Mobileblaster 11 месяцев назад
Thanks 😊
@MikeWilliams-yp9kl
@MikeWilliams-yp9kl Год назад
Great job looks like a new boat ❤
@Mobileblaster
@Mobileblaster Год назад
Thank you 😊
@HughzieTube
@HughzieTube Год назад
Always love the end of the boat videos for the ''While you're here, can you just...'' bits to appear! Only seems to happen on boat videos though! lol
@Mobileblaster
@Mobileblaster Год назад
It happens on nearly every job I will start and film more of em 😂😬 can you just...
@newblast6169
@newblast6169 Год назад
Very nice job, amazing you got that done in one day!
@Mobileblaster
@Mobileblaster Год назад
Yeah it was close to using all the media I tuck like so close I was on my last pot 😂
@ianlitchfield9273
@ianlitchfield9273 6 месяцев назад
Who wanted to see more of the underside being blasted 👍
@Mobileblaster
@Mobileblaster 6 месяцев назад
I have videos of the base plate been blasted 👍
@eaglybeagly
@eaglybeagly 5 месяцев назад
The most efficient use of blast media and effective profile creation is with an orbital motion at the nozzle.
@eaglybeagly
@eaglybeagly 5 месяцев назад
Just saying.
@frankkreyssig7626
@frankkreyssig7626 Месяц назад
Not enough room for the camera and him to work.
@aaronplumb8373
@aaronplumb8373 2 месяца назад
Hey brother ,cool video , great work ,I also blast and am a fabricator /welder from Alberta Canada 🇨🇦 👍🏻 keep Crushing bro, God Bless 🙏🏻
@Mobileblaster
@Mobileblaster 2 месяца назад
😊👌👍
@irod23
@irod23 3 месяца назад
Amazing job, I would be interested on seeing more of this refurbish!
@Mobileblaster
@Mobileblaster 3 месяца назад
😊👍
@nicksmith2468
@nicksmith2468 4 месяца назад
You made it look easy...again great job
@Mobileblaster
@Mobileblaster 4 месяца назад
😊👌👍
@chinolopez572
@chinolopez572 3 месяца назад
You should do a video about the machine you used. Thanks. And nice job by the way
@Mobileblaster
@Mobileblaster 3 месяца назад
😊👌👍
@andrzejporeda7281
@andrzejporeda7281 4 месяца назад
Super jeszcze wypiaskowany Pozdrawiam serdecznie. 👍👍👍👍👍👍👍
@Mobileblaster
@Mobileblaster 4 месяца назад
😊👌👍
@MegaBait1616
@MegaBait1616 7 месяцев назад
Nice job and wish ya good luck....... from North Carolina USA.
@Mobileblaster
@Mobileblaster 7 месяцев назад
Thank you 😊 welcome to the blast hood 🙂
@Local_Boydidgood
@Local_Boydidgood 11 месяцев назад
Love the video. If I've told my students once, a thousand times;edges 1st. Wish I could use this on the boats I see. Neat to watch. Lee
@Mobileblaster
@Mobileblaster 11 месяцев назад
Thank you 😊 I will be honest I always seam to do the edges 1st and don't have a real answer as to why just feels like the right thing to do 😬
@bigbadboodah
@bigbadboodah Год назад
Great job!!!!!
@Mobileblaster
@Mobileblaster Год назад
Thank you 😊
@phenogen8125
@phenogen8125 Год назад
Looks like they timed the blast and repaint to perfection; before the (epoxy) paint breakdown and loss of steel. Lot of berthed time for those young barnacles but a big resulting slip.Great job.
@Mobileblaster
@Mobileblaster Год назад
It came up real nice 👌
@picklepee2771
@picklepee2771 8 месяцев назад
I work in Newport News Shipbuilding and yup, you're correct. Better to blast and spray BEFORE the paint coating breaks down.
@leetheriderforlife7548
@leetheriderforlife7548 11 месяцев назад
Done a good job 👏👏 would like to see it finished in paint 👍
@Mobileblaster
@Mobileblaster 11 месяцев назад
Thankyou 😊🫡👍 unfortunately I'm never about when it comes to paint I perfer to stay clear of the putting it back on stages haha
@dacat8171
@dacat8171 10 месяцев назад
Beautiful 👍🏾
@Mobileblaster
@Mobileblaster 10 месяцев назад
😊👌👍
@scottkenzig5144
@scottkenzig5144 Год назад
Crickey mate that was so good to watch 👍👌🇭🇲🇬🇧
@Mobileblaster
@Mobileblaster Год назад
😊👌👍
@acsberean4092
@acsberean4092 4 месяца назад
Awesome! I could use a sandblaster in my kids room.
@Mobileblaster
@Mobileblaster 4 месяца назад
😂
@joeroad6618
@joeroad6618 Год назад
nice job Mick, looks like that new compressor is really working good for ya.
@Mobileblaster
@Mobileblaster Год назад
Thank you 😊 yeah I'm more and more happy with the purchase as every job gets done just need about 5 years worth of work now to pay for it 😂
@bur23
@bur23 Год назад
Дорогу осилит идущий✊
@ianhowe8823
@ianhowe8823 Год назад
Did you use a more aggressive media on this one, as I notice the grey floor and less dust like there normally is with the recycle glass. Perfect finish for paint , great job Mick. Oh and where do the wheels fit on the barge🤣
@pa1264
@pa1264 6 месяцев назад
Great video nice job👍🙂
@Mobileblaster
@Mobileblaster 6 месяцев назад
😊👍
@powerofone1645
@powerofone1645 5 месяцев назад
Strangely satisfying to watch.
@Mobileblaster
@Mobileblaster 5 месяцев назад
😊👍👌
@louischannel7008
@louischannel7008 5 месяцев назад
Very satisfying to do, I was a sandblaster for 6 years in my 20 ‘s. NZ lytleton dry dock.
@SonofChurchill
@SonofChurchill Год назад
New safety working well 😁
@Mobileblaster
@Mobileblaster Год назад
😬😆
@paulf2529
@paulf2529 Год назад
That came up very well, a big old boat compared to a normal canal boat.
@Mobileblaster
@Mobileblaster Год назад
Yeah I did wonder if I could complete when I sported the size 😆
@gpjansevanrensburg8113
@gpjansevanrensburg8113 Год назад
Really nice video, at least not as bad as the boat with the filler 👍
@Mobileblaster
@Mobileblaster Год назад
Ya know when ya pull up as I don't have any info just that its a boat when I pulled up and spotted the size of it I was wishing the boat to blast was parked somewhere els haha turned out OK in the end glad it wasn't full of filler 🙏😆
@chriscars3578
@chriscars3578 11 месяцев назад
Great job done again mick 👍👍👍
@Mobileblaster
@Mobileblaster 11 месяцев назад
Thank you 😊 👍👌
@gdotone1
@gdotone1 Год назад
very nice
@Mobileblaster
@Mobileblaster Год назад
Thank you 😊
@swampy1584
@swampy1584 5 месяцев назад
Nice job you made it look easy
@Mobileblaster
@Mobileblaster 5 месяцев назад
😊👍👌
@Junior-db2rl
@Junior-db2rl 14 дней назад
bc it is easy lol
@Mobileblaster
@Mobileblaster 13 дней назад
Look forward to seen your videos 😏
@americanrambler4972
@americanrambler4972 11 месяцев назад
By the way, that barge has a nice attractive looking hull. It has nice lines and shape to it. It looks like a proper vessel.
@Mobileblaster
@Mobileblaster 11 месяцев назад
I thought it looked too big when I turned up 😂 surly that will struggle to fit down the UK canal system?
@americanrambler4972
@americanrambler4972 11 месяцев назад
@@Mobileblaster it’s probably to wide and deep to fit down and through some of it where the canals and locks are only 7 feet wide.
@AbdulHafeez-cq6oo
@AbdulHafeez-cq6oo 3 месяца назад
good job
@Mobileblaster
@Mobileblaster 3 месяца назад
Thank you 😊
@HanksWreckerService-hz7ks
@HanksWreckerService-hz7ks Год назад
You make it look so easy! What CFM compressor do you run and how many PSI? That blast pattern looks fairly large
@Mobileblaster
@Mobileblaster Год назад
425 cfm @ 125psi :)
@Mattlawton-ft6ew
@Mattlawton-ft6ew 11 месяцев назад
​@@Mobileblasterbrilliant I need one 👍
@jmacdonald4681
@jmacdonald4681 5 месяцев назад
This is a nice little set up. When larger vessels are done with multiple blasters we'll use double or triple the air volume at similar pressures. Sandblasting is the fun part. Painting sucks until its all done and looks pretty lol
@johnmitchell5351
@johnmitchell5351 4 месяца назад
Hey mick a good run of work there ,I used to blast and paint on the gas holders ,there was 2 of us would spend a couple of hours under the hood and then a quick clean up and prime paint , the good thing about blasting is no other prep work before paint and it looked good as well
@markfrederick6202
@markfrederick6202 10 месяцев назад
Perfect job for someone with OCD lol but he is doing a beautiful job of it.
@Mobileblaster
@Mobileblaster 10 месяцев назад
😬😊👌👍
@markbrooke4100
@markbrooke4100 Год назад
Top job, looks the dogs bollocks 👍🙏
@Mobileblaster
@Mobileblaster Год назад
It did come up nice this 1 😊
@donnaarnault1472
@donnaarnault1472 Год назад
Thanks
@Mobileblaster
@Mobileblaster Год назад
Thank you I appreciate that 😊👌👍
@CenturyHomeProject
@CenturyHomeProject 4 месяца назад
There’s nothing better than watching a master artist practice their craft.
@Mobileblaster
@Mobileblaster 4 месяца назад
😊👍👌
@americanrambler4972
@americanrambler4972 11 месяцев назад
What becomes of the blast media you use on the job? Is it one and done, or is the media recovered, cleaned and reused? Or can it be used for other tasks? That looks like a fair amount of left over stuff to just send to a land fill with no other applicable use.
@Mobileblaster
@Mobileblaster 11 месяцев назад
Once and done for me it's oready a waste product finding another use it comes from the ground they processes it get what they want from it then bag this for us to purchase
@lancpudn
@lancpudn Год назад
R'reet Mick, Big buggers them Dutch barges eh! Are they restricted as to where they can go on the canals & rivers? How long have they got to treat/paint it before it starts to flash rust again. Great job as always mate.
@Mobileblaster
@Mobileblaster Год назад
I'm not sure about the canal systems I think they can go almost everywhere the narrow 1s do but I'm unsure to be fair. Depending on the humidity it could last weeks like that even months but my advice is get atlases some primer over it as soon as possible usually the next day 👍 some days if I can get done in a reasonable time frame the lads stop over to get a coat onit the same day but I think this was painted the following day
@koloros-cacak
@koloros-cacak 3 месяца назад
Well done. What abrasive did you use?
@Mobileblaster
@Mobileblaster 3 месяца назад
Iron silicate 👌👍
@earlwright9715
@earlwright9715 11 месяцев назад
Oddly satisfying ! So that was a canal boat?
@Mobileblaster
@Mobileblaster 11 месяцев назад
😊👍👌 yeah apparently so seems more like a ship to me haha
@jeffdunstan
@jeffdunstan 4 месяца назад
very interesting video. im a spraypainter but ive never sand blasted before. Is it difficult to hold the hose with all that pressure?? im going to be at a job that does blasting and painting. any advice you can give is appreiated
@Mobileblaster
@Mobileblaster 4 месяца назад
Its not as simple as these videos make out 👍
@americanrambler4972
@americanrambler4972 11 месяцев назад
Do you return and blast the areas obscured by the blocking holding the barge in place?
@Mobileblaster
@Mobileblaster 11 месяцев назад
No it's not so bad of area to hit with a sander if they wanted it doing 😊
@artnautica1
@artnautica1 8 месяцев назад
Well done.!! Surprisingly little dust is created when you are biasting. Is it because of the blasting material?
@Mobileblaster
@Mobileblaster 8 месяцев назад
More likely that I'm the 1 paying for the media so I try to only use what I need 😬👍👌
@George-hl3qj
@George-hl3qj 3 месяца назад
Hello my friend. What kind of sand-blasting medium did you use? Another question, is it possible or cost-effective to collect or save the sand again? I think is not possible like when you work in a workshop.
@Mobileblaster
@Mobileblaster 3 месяца назад
Crushed glass or iron silicate I believe this was iron silicate. It would be possible but eat up a lot of time my idea was im hear to blast so I try and do as much blasting as possible and collecting media would make the job a lot longer
@mussim2919
@mussim2919 Месяц назад
Is that a torch blaster or sandblaster? It was fun watching the video.
@Mobileblaster
@Mobileblaster Месяц назад
Sandblaster 👌👍
@benachiesween
@benachiesween 8 месяцев назад
The steel hull of my 35ft ex RN harbour launch was sand/gritblasted 10 years ago. The dust was incredible. What system is this?
@Mobileblaster
@Mobileblaster 8 месяцев назад
Probably the same system but an operator that's paying for the media not a worker that's not interested in optimization 😂👍 some people think more media is faster I believe letting the air do the work 😎👌 the is a sweet spot too lean and your diesel bill will be on the high side or too rich and your media will be eaten up too quick
@billkea7224
@billkea7224 8 месяцев назад
I thought the UK had banned sand for blasting. I love your setup. I hope that is supplied air you are using.
@Mobileblaster
@Mobileblaster 8 месяцев назад
Yeah its been banned since the 60s I only use approved medias the media I used hear was iron silicate (silica free) yeah I filled air from the compressor its grade D air poor air but better than neet air from a Compressor as thats not breathable
@MegaBait1616
@MegaBait1616 7 месяцев назад
Question : why would sand blasting be banned ?? I know they have crazy laws and rules like paying for watching TV, anti-guns, heavily taxed, arrested for posting on the net, ect. but sand blasting ?? thanks be well.
@Mobileblaster
@Mobileblaster 7 месяцев назад
@MegaBait1616 yeah to use as a media as its got free sillica (sillica sand/kiln dry sand) tests was done and they found its a lead course for silicosis its best just to use approved media's that way they can tax us properly on the media instead of sweeping up some grit off the ground and siving the dirt and using free media 😂
@TheAstraeuss
@TheAstraeuss 11 месяцев назад
I'm surprised you didn't prep i.e. cover the windows. You weren't afraid of hitting the glass? What did you use as your blast media? Sand, glass? Thanks, I blast log homes mostly.
@Mobileblaster
@Mobileblaster 11 месяцев назад
I don't prep the windows I'm confident I won't hit them. Media was crushed glass
@TheAstraeuss
@TheAstraeuss 11 месяцев назад
@@Mobileblaster Cool, thanks for the reply. Looks great by the way.
@Mobileblaster
@Mobileblaster 11 месяцев назад
@@TheAstraeuss turned out nice 😊👌👍
@usih3
@usih3 Месяц назад
Good day, would it be possible to see some Before/After shots you pointed out during your initial walk through?
@Mobileblaster
@Mobileblaster Месяц назад
Something I will make note of on future videos 👌👍thankyou
@usih3
@usih3 Месяц назад
You don't know much that will be appreciated. We know it's gone but I for one would like to see a little before and after if your video time permits.
@DEmma1972
@DEmma1972 Год назад
Lovely example of a Dutch barge cargo conversion (replica). Did any of the barnacles hit your mask?
@Mobileblaster
@Mobileblaster Год назад
Haha they messed it up and ruined the pov shots I had so I tried a little faster but longer time-lapse what you think good speed?
@DEmma1972
@DEmma1972 Год назад
@@Mobileblaster Speeded up, the job looks quick and easy. A good mix showing how long each section takes and then an overall sped up version is perfect
@Mobileblaster
@Mobileblaster Год назад
@DEmma1972 😊 it was hard on this 1 because I forgot my battery bank and the gopro batteries don't last very long I nearly filmed it all 😂 just a shame the pov I did get the lense got covered 🫣
@bruceintas
@bruceintas 5 месяцев назад
If it was small and easy, they would di it themselves. My grandad came out of Barnsley and complained about everything. I'm from Australia.
@Mobileblaster
@Mobileblaster 4 месяца назад
😂👌👍 I have friends in Wauchope 😊
@garyguild8907
@garyguild8907 Год назад
Nice work Mick ,you never mentioned how long it took buddy
@Mobileblaster
@Mobileblaster Год назад
It was done in the shift well just under 8 hour 👍
@chriseccles1454
@chriseccles1454 Год назад
Bang tidy 🎉 why the wheels 😅
@Mobileblaster
@Mobileblaster Год назад
@@chriseccles1454 😂 we have to keep roiling somehow haha just a tiny can you just.... haha
@devinovaa
@devinovaa 6 месяцев назад
Out of curiosity, is this kind of work taxing on the hands/body? My husband just started this line of work with no experience and said his hands felt horrible after the 8hr shift of doing this.
@bundles987
@bundles987 10 месяцев назад
Just outta curiosity what happens to all that stuff you blasted off that ended up in the floor? Are you responsible for sweeping it up or do they do it once they are finished repainting it?
@Mobileblaster
@Mobileblaster 10 месяцев назад
I have a contract with the boat yard they take care of the clean up 👍
@willem3690
@willem3690 9 месяцев назад
Everybody can see that the paint can easily flush away, and disappear in the nature. It’s a little sad.
@Mobileblaster
@Mobileblaster 9 месяцев назад
@@willem3690 it's a little sad to even think that's what happens I have a deal with the boat yard I blast they clean up
@peterwestgrove
@peterwestgrove 11 месяцев назад
Nice to hear the voice of someone from 'home'... I'm curious, have you considered using a laser? Or is it too expensive?
@Mobileblaster
@Mobileblaster 11 месяцев назад
😊👌👍 yeah I've looked into these and the costs involved plus the cut rate is super slow the technology isn't quite ready to rival a sandblaster even if it did do a similar job to a blaster the energy needed wouldn't make it feesable just yet. I believe it will be the future but not for a good time yet 👍
@jackdbur
@jackdbur 11 месяцев назад
A laser doesn't provide a profile for your paint to grip to media blasting makes a rough surface for paint to get maximum adhesion to the steel
@Moh4n95
@Moh4n95 Год назад
Hey Mick quick question don't never had that feeling when see a or started a job that looks fun to or easy do doing and while during the job you immediately regrets to taken that job on and you can't backing out the job anymore of it ? 😂
@Mobileblaster
@Mobileblaster Год назад
Loads of jobs when I 1st started out but since making them mistakes I don't fall for them again 😆 I've been at this game for some years and taken on alsorts of jobs looking back knowing what I know now some I should have walked well away from haha
@Moh4n95
@Moh4n95 Год назад
@@Mobileblaster yes i know but if you don't make the mistakes you never learn anything about it plus this the way to become a pro in something if you don't take risks or willing to trying something you won't achieve things in life avoid mistakes that you can don't make them purpose 😆
@mohamadqaqyysh8909
@mohamadqaqyysh8909 4 месяца назад
اعمل بهاذا المجال منذ ثلاثون عام
@Mobileblaster
@Mobileblaster 4 месяца назад
👌👍
@mikepalm6452
@mikepalm6452 7 месяцев назад
Mick i just wondered how come it does not start going to start rusting before you get any primer on the metal...
@Mobileblaster
@Mobileblaster 7 месяцев назад
Depending on the humidity and if you can keep the steel dry it will last days even weeks before flash rusting appears I've had an old lambretta frame sitting in the unit for almost a year and it was still fine obviously the type of metal plays a part in this as cast iron flash rusts near instantly after blasting with very little humidity. But rolled steel seams to have a good resistance to flash rusting
@Confettish1
@Confettish1 29 дней назад
How much time do you have to apply primer before rust starts showing up?
@Mobileblaster
@Mobileblaster 29 дней назад
If its kept dry week months even years but it would need to stay dry and in a climate controlled area for humidity its best to coat it straight away or as soon as possible for best results 👌👍
@marllontosi
@marllontosi Год назад
Boa noite Mick , qual abraaivo você usa ... vejo q nao faz pó. parabéns pelos vídeos 👍
@Mobileblaster
@Mobileblaster Год назад
Iron silicate on this job. Thank you 😊
@marllontosi
@marllontosi Год назад
😊 quantos kilos de material você gastou nesse serviço Mick ...
@marllontosi
@marllontosi Год назад
Mick qual material você gosto mais de usar nos trabalhos... eu trabalho com jateamento abrasivo umido , mais tô vendo muito os seus vídeos e tô querendo mudar para o processo a seco .... e gostaria da sua ajuda e poder tirar mais duvidas 😀 , desde já agradeço a atenção.
@Mobileblaster
@Mobileblaster Год назад
It was around 18x 25kgs bags so 450/500kgs if memory serves could have been less. I really like crushed glass it's cheap and fast cut. Iron silicate is 2nd choice only reason been its slightly faster cut and a deeper profile but in my opinion not worth dubble the money per bag only on really the odd jobs or if I have some left over and Im trying to keep stock fresh 👍
@marllontosi
@marllontosi Год назад
poxa tem um rendimento muito bom mesmo, quero agradecer sua atenção e vou continuar acompanhando seu trabalho, um abração meu amigo Mick ... sucesso e fique com Deus 🙏🙏🙏🙏
@samirsbairamovs7994
@samirsbairamovs7994 Год назад
Hello Mick!Haw difficult learn sandblasting and haw much need money for start Thanks
@Mobileblaster
@Mobileblaster Год назад
Well alot of verbals at play with that question depends on what line of work you want to learn this will determine how much you need to spend if your going to buy new or 2nd hand etc
@pw601
@pw601 7 месяцев назад
I'm curious about the rudder, very different to a normal canal boat , doesn't look very hydrodynamic. Is there a reason for it's form?
@Mobileblaster
@Mobileblaster 7 месяцев назад
I don't have a clue 😂
@vrodkris
@vrodkris 10 месяцев назад
Here is NACE Level 3 inspector notes : 1) Scrape all Barnacles and loose growth off the hull first 2) Pressure wash the hull fresh potable water @ 3000 PSI 3) Now you are ready to blast, Remember prior to coating application to test steel hull with a CSN test kit or a the least use a Kittagwa tube. For Soluble Salts. Should be no more than 3 PPM soluble salts. The CSN tests for chlorides,Sulfates,Nitrates. Blasting all the marine Growth and unwashed hull contaminates into the steel is not recommended as it imbeds in the steel and painting over it is a major cause of coating failure. Any coating Data sheet should outline this ,and prior to work commencing should be reviewed with coating applicators.
@Mobileblaster
@Mobileblaster 10 месяцев назад
My job sheet says prepare the serface to SA2 I always try for SA2.5 or better then the rest is upto the painters 👍
@jmacdonald4681
@jmacdonald4681 5 месяцев назад
Do you ever need to prewash anything? typically any grease or oil substances would be solvent cleaned prior to blasting to avoid embedding the oil into the steal causing adhesion issues later on.
@Mobileblaster
@Mobileblaster 5 месяцев назад
It would help but not essential as the blaster will remove most to all of anything on the serface
@iandamianluciferwilson7385
@iandamianluciferwilson7385 11 месяцев назад
Great job. How long did the job take Mick. Cheers.
@Mobileblaster
@Mobileblaster 11 месяцев назад
I was done in the shift around 7 hour
@iandamianluciferwilson7385
@iandamianluciferwilson7385 11 месяцев назад
@@Mobileblaster that's grafting. As my old dad used to say.
@Mobileblaster
@Mobileblaster 11 месяцев назад
@@iandamianluciferwilson7385 that's without stopping for dinner etc I like to plod on faster I get the job done the faster I can go home 😏
@robb5834
@robb5834 10 месяцев назад
Like see vid painting it
@Mobileblaster
@Mobileblaster 10 месяцев назад
I'm never about when they paint them unfortunately
@route66detailinglondon18
@route66detailinglondon18 4 месяца назад
@mick blackley is there anyway I can join you for a 1 day experience? I've always wanted to do this, I'm from London
@Mobileblaster
@Mobileblaster 4 месяца назад
Unfortunately it would be a nightmare for my accountant as I would have to put you on my books to make sure your insured etc and I will be honest you won't pickup enough info up in just 1 day these videos do make it look easy so please take what you will from them but alot is going off that's not shown 👍
@stevedelaney5652
@stevedelaney5652 Год назад
What nozzle are you using? Thx
@Mobileblaster
@Mobileblaster Год назад
850xl 👍
@tonymccaffrey9025
@tonymccaffrey9025 9 месяцев назад
is there much difference between the power plus nozzle and standard nozzle? I've got 400 cfm thanks 👍
@Mobileblaster
@Mobileblaster 9 месяцев назад
Yes definitely worth the investment and I like to see a different when I spend money but you will find it hard to find the 950 needed for 400cfm I've got the 850 and the next hit is 1050 ya need 500cfm I believe for that. Don't fall for the sales pitch of they add power that's bolx but they do add reach well they keep the cone tighter for longer so it will feel more power as the overspray is reduced and the hotspot is hotter 👌👍 they add about ft extra reach compared to a standard nosel
@tonymccaffrey9025
@tonymccaffrey9025 9 месяцев назад
@@Mobileblaster thanks Brother i think I'll go for it. keep up the good work 💪
@Mobileblaster
@Mobileblaster 9 месяцев назад
@tonymccaffrey9025 I pick the XL over every other nosel I've got Hopefully you will like it as much as me 😊👍
@gregmach8230
@gregmach8230 11 месяцев назад
Did you etch the glass any.
@Mobileblaster
@Mobileblaster 11 месяцев назад
Glass? I wasn't near any 👌👍
@darrenlewis4423
@darrenlewis4423 7 месяцев назад
What size nozzle are you useing? How many Kgs per hour do you get through? Cheers.
@Mobileblaster
@Mobileblaster 7 месяцев назад
850 #8 and aprox 75kgs per hour
@Marc-ft1xh
@Marc-ft1xh 2 месяца назад
Where is all that sand going...and can it be recovered or is it too fine?
@Mobileblaster
@Mobileblaster 2 месяца назад
It gets disposed of at the end of the process. It could be reused but I choose not to just to keep good speed 👌
@sefketsar2707
@sefketsar2707 7 месяцев назад
HANGİ ÜLKE SÖYLİYEBİLİRMİSİNİZ , BEN DE BU İŞİ YAPIYORUM , YUNANİSTANDAN SELÂMLAR...
@Mobileblaster
@Mobileblaster 7 месяцев назад
England 👌👍
@andotschannel3014
@andotschannel3014 2 месяца назад
what power do you use
@Mobileblaster
@Mobileblaster 2 месяца назад
Compressed air 425cfm at 125psi 👍
@RJ-nh9hw
@RJ-nh9hw 11 месяцев назад
What type of media are you using?
@Mobileblaster
@Mobileblaster 11 месяцев назад
I cannot remember off the top of my head it would have been eva crushed glass or iron silicate 👍
@danieldavis322
@danieldavis322 11 месяцев назад
What for grit are you Using
@Mobileblaster
@Mobileblaster 11 месяцев назад
Iron silicate fine 👍
@iankynaston-richards5239
@iankynaston-richards5239 11 месяцев назад
Which yard was it? I'm Yorkshire and looking for someone to do mine.
@Mobileblaster
@Mobileblaster 11 месяцев назад
Thorne Doncaster 👍 please send business enquiries to info@mobileblasting.co.uk
@ryanwerleman1646
@ryanwerleman1646 9 месяцев назад
gaan ze meteen der over verven of spuiten primer meschien ?
@Mobileblaster
@Mobileblaster 9 месяцев назад
Yeah normally they get some primer on the same day or following day 👌👍
@hottamaleboy1198
@hottamaleboy1198 Год назад
How long did that take you to complete 😢
@Mobileblaster
@Mobileblaster Год назад
It was done within the day 👍
@simonthorneycroft1339
@simonthorneycroft1339 11 месяцев назад
So is it yourself or the customer who gets landed with cleaning up the site afterwards?
@Mobileblaster
@Mobileblaster 11 месяцев назад
Neither 😂 the Dock owner dose the clean up 😎 we have a nice agreement 🤝
@jamesteasley5493
@jamesteasley5493 8 месяцев назад
Maybe you can help duo vagari with their rusty barge with history dating back to 1910
@Mobileblaster
@Mobileblaster 8 месяцев назад
I just watched their progress they really need a Sandblaster for sure 👌😊
@mons-fe9fw
@mons-fe9fw Месяц назад
How mutch did the sand cost for this job?
@Mobileblaster
@Mobileblaster Месяц назад
Sorry I've forgotten
@yachticus
@yachticus 7 месяцев назад
how long can you leave it before you have to stick a sealing cover (like chromate primer ) over it
@Mobileblaster
@Mobileblaster 7 месяцев назад
That would depend on how dry you can keep it also the humidity levels I've had a boat half blasted for weeks out side in the rain and it only needed patch blasting to bing it back
@yachticus
@yachticus 7 месяцев назад
thanks Mick - so very much local environment - I thought there might have been an issue with it flashing as you might get with mild steel (untreated)- thanks@@Mobileblaster
@Mobileblaster
@Mobileblaster 7 месяцев назад
@yachticus yeah any mild steel will last a decent amount of time if it can be kept dry boats are no different if the get wet they will flash rust but it's not a big problem looks bad but the tea staining really isn't hard to remove can be done with chemicals or even acid primers some say leave to flash rust so they adhere properly
@MJJCvideo
@MJJCvideo 5 месяцев назад
@Mick Blackley SandBlaster Good video of Removing Rust,may I know if it's ok for you to review our foam cannon S V3.0?Thanks a lot in advance!☺
@Mobileblaster
@Mobileblaster 5 месяцев назад
Not sure a foam cannon would fit the type of videos I make thanks.
@MJJCvideo
@MJJCvideo 5 месяцев назад
May I know the type of your video?@@Mobileblaster
@Mobileblaster
@Mobileblaster 5 месяцев назад
@@MJJCvideo the name of the videos and the channel kinda give that away 🫣😂 if that's still not enough I'm a sandblasting channel I tend not to use foam cannons 👍
@MJJCvideo
@MJJCvideo 5 месяцев назад
Ok dear!Thanks so much!☺@@Mobileblaster
@naignildoi826
@naignildoi826 6 месяцев назад
how many hours work was that?
@Mobileblaster
@Mobileblaster 6 месяцев назад
Around 7 hour I think 👍
@nicksonintai1938
@nicksonintai1938 11 месяцев назад
Hi..how do you price your work and can we see your blasting set up?
@Mobileblaster
@Mobileblaster 11 месяцев назад
I work out how much my rig is costing then I add a labour charge I can live on and feed my family that's how I work my pricing out. 👍
@nicksonintai1938
@nicksonintai1938 11 месяцев назад
@@Mobileblaster what grit are you using? I see not much dust in the air. We are here using GMA garnet and normally a lot of dust produce
@Mobileblaster
@Mobileblaster 10 месяцев назад
@@nicksonintai1938 iron silicate 👍
@nicksonintai1938
@nicksonintai1938 10 месяцев назад
Okay..thanks for the sharing. Must be a good grit. Minimal dust and I see it is easy for you to work alone. Here I need at least 1 pax to stand by the blasting pot because the garnet is always stuck in the pot and does not flow smoothly. By the way, we are doing work in South East Asia. Glad to have seen your videos.
@Mobileblaster
@Mobileblaster 10 месяцев назад
@nicksonintai1938 scrap the extra man and use dry filtered media much better flow 👍
@user-zr2eg3bk2j
@user-zr2eg3bk2j Месяц назад
How many hours dis this take?
@Mobileblaster
@Mobileblaster Месяц назад
I cannot remember off the top of my head 👍
@whoispriest
@whoispriest 2 месяца назад
Is this dustless or sand?
@Mobileblaster
@Mobileblaster 2 месяца назад
Crushed glass can be used dry or wet this was dry 👍
@whoispriest
@whoispriest 2 месяца назад
@@Mobileblaster How does somebody break into this industry?
@Mobileblaster
@Mobileblaster 2 месяца назад
@@whoispriest Same as you would with any other trade 👍
@matthewcarter9374
@matthewcarter9374 11 месяцев назад
How much media did this job take?
@Mobileblaster
@Mobileblaster 11 месяцев назад
I cannot remember off the top of my head I would load the van with 800kgs on the hopes I would be bringing most of it back but some do take alot of media 👍
@turbodog99
@turbodog99 11 месяцев назад
@@Mobileblasterhow much diesel?
@Mobileblaster
@Mobileblaster 11 месяцев назад
@turbodog99 near 250L
@Dalandan05
@Dalandan05 2 месяца назад
Zup bro can I apply for a job like that?
@Mobileblaster
@Mobileblaster 2 месяца назад
Sorry I'm not setting on at the moment 👍
@telosfd
@telosfd Месяц назад
New again. At 11:50 is en extra job?
@Mobileblaster
@Mobileblaster Месяц назад
Can you just job 😂👌👍
@AbnerNora-so1fk
@AbnerNora-so1fk 7 месяцев назад
need to know if they have sandblasting jobs here in the United States
@Mobileblaster
@Mobileblaster 7 месяцев назад
Yeah its very popular over in the States
@armantanzairiand
@armantanzairiand Год назад
😀👍🍺
@Mobileblaster
@Mobileblaster Год назад
😊👌👍
@frankkreyssig7626
@frankkreyssig7626 Месяц назад
I think they should have put it a little lower to the ground.
@Mobileblaster
@Mobileblaster Месяц назад
It was OK 👌👍 putting it lower would mean rearranging the lending blocks that's bolted to the floor the is 3 different styles for different boats shapes and sizes so alot of work really
@techscrew2
@techscrew2 8 месяцев назад
How many thousands would this cost?
@Mobileblaster
@Mobileblaster 8 месяцев назад
For Business Enquiries Please Email Info@MobileBlasting.co.uk Regards Mick
@Rust.Converter.Primer.Coating
@Rust.Converter.Primer.Coating 8 месяцев назад
Nice work i am manufacturing Rust Blocker if you are intrested that will be best for ships.
@Mobileblaster
@Mobileblaster 8 месяцев назад
Do you supply inhibitors?
@bablibabli2205
@bablibabli2205 3 месяца назад
Hello friends
@Mobileblaster
@Mobileblaster 3 месяца назад
Hi 👋
Далее
Narrowboat SandBlasting
26:08
Просмотров 175 тыс.
Dragon Age: The Veilguard | Official Gameplay Reveal
20:23
#kikakim
00:11
Просмотров 3,7 млн
Why Millions Get Silicone Caulk Wrong
5:23
Просмотров 672 тыс.
CLEMCO SCW-2452
7:55
Просмотров 60 тыс.
Narrowboat failed survey SandBlasting
24:15
Просмотров 150 тыс.
Dragon Age: The Veilguard | Official Gameplay Reveal
20:23