Тёмный

Break Down At Anchor! - Onboard Lifestyle ep.295 

Onboard Lifestyle
Подписаться 66 тыс.
Просмотров 26 тыс.
50% 1

On this week's episode of Onboard Lifestyle, we continue our sail further South. Unfortunately, it is not without some issues. Teal starts investigating the cause of the "clunking" sounds coming from our rudder. Basik shows her age as a few components take a beating in this harsh marine environment and the unpredictable Papagayos. The crew takes on the challenges and pushes forward. Come back next week to see if we clear the next hurdle without tripping up...see you then!
JOIN OUR CREW!
If you are interested in helping us produce these videos then please feel free to check out our Patreon page. / onboardlifestyle
TIP JAR:
Enjoy our videos? Want to give us a virtual high-five? Treat us to glass of rosé or whiskey on the rocks or another book for Emma? Or pitch in on a tank of fuel? Click over to see how you can support our productions (most of the ways won’t cost you a dime):
www.paypal.com/cgi-bin/webscr...
SHIP'S STORE:
Want to purchase our sv basik gear? Check our our Merch Store and show us some love by grabbing a shirt or two! Designed by our Swabby Emma:
theletteringmachine.com/Onboa...
PRODUCTS & CAMERA GEAR:
www.amazon.com/shop/onboardli...
We have collected some of the products we use during our refit and to make videos in our Amazon shop. If you buy any of the items from our shop or anything else on Amazon (using the link), we get a few pennies added to our cruising kitty. Thank you so much and thank you to Amazon Influencer program.
Don't forget to like us on Facebook!
/ onboardlifestyle-sv-ba...
Check out our website! Still updating. 😜
www.onboardlifestyle.com/

Опубликовано:

 

23 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 109   
@darrenbrumley
@darrenbrumley 24 дня назад
I'm disappointed that Teal didn't whittle a starter from a coconut.
@chshrkt
@chshrkt 23 дня назад
He does have that Roy Hinkley 'Professor' vibe going on for sure. 😉
@gregchrist5090
@gregchrist5090 23 дня назад
Yeah, my thoughts exactly
@gregchrist5090
@gregchrist5090 23 дня назад
My thoughts exactly.
@cnc75adventures49
@cnc75adventures49 23 дня назад
Basic diy
@walterwinn2842
@walterwinn2842 23 дня назад
He couldn't find a coconut 😢
@dutchglobetrotter4513
@dutchglobetrotter4513 24 дня назад
Emma you should try to find a job narrating Audio books. You have such a nice voice to listen too.
@NVPhotography
@NVPhotography 23 дня назад
i second that
@rboston33
@rboston33 24 дня назад
My favorite sailing family
@Anne6621
@Anne6621 24 дня назад
don't ya just love em !!
@Dr.Pepper001
@Dr.Pepper001 24 дня назад
They should have 8 million subscribers. ❤
@navarredr
@navarredr 22 дня назад
Yep. I've lived vicariously through many sailing channels over the past ~decade, but this is (still) my fave!
@edquier40
@edquier40 23 дня назад
A minor break down is always a good excuse to upgrade the tools of life!
@jerrybarrett6376
@jerrybarrett6376 23 дня назад
Good thing. Captain Teal can fix most anything, because it seems repairs are on going when living aboard. Still a great life and freedom is priceless. God bless, Jerry 🐻🙏🇺🇸
@justsomeguy6474
@justsomeguy6474 23 дня назад
Yachting is fixing your boat in exotic locations.
@darryleldridge6464
@darryleldridge6464 24 дня назад
Don't give up I know you can check this out. 1, check the voltage, 2 clean all electrical connections, it's probably something simple. 3 if that doesn't work remove disassemble clean starters are not that complicated give it a try, good luck
@stevehammond7485
@stevehammond7485 23 дня назад
Agree! It's just a motor with a solenoid/contactor on it. It's already inop, give it a try.
@trevorsmith9901
@trevorsmith9901 23 дня назад
Aye, my money would be on the copper contacts inside the solenoid having disintegrated. Sparking from making/breaking the starter current eats those up. Easy fix if you have spare contacts.
@gorgenengman4074
@gorgenengman4074 24 дня назад
HAHHA Lhin and Emma look very funny whid thet big sunglases
@klintkrossa6885
@klintkrossa6885 23 дня назад
To bad that you could not have been ashore more I find Costa Rica fun. Wish we could have meet and enjoyed a beer.
@fxpthl
@fxpthl 23 дня назад
Wow Real, you almost Always carry a spare! Hope you can find someone to rebuild it for you soon! Your girls are as lovely as ever!
@jorgemonserrate7070
@jorgemonserrate7070 24 дня назад
Before the carbon-fiber 3D printer, I suggest y’all get a new dingy. 🤣😂👍
@OnboardLifestyle
@OnboardLifestyle 23 дня назад
That's the plan!
@Xalta_Sailor
@Xalta_Sailor 23 дня назад
We lived and traveled for 10 years on a Yanmar 29hp powered cat. I had starter problems soon after buying the then 4 year old boat. Bought 2 eBay cheap compatible starters. They were still on the engines when I sold the vessel in Australia. Carry at least one spare as it is cheap insurance and a relatively easy change out in the troubleshooting process.
@Life-Dreaming
@Life-Dreaming 23 дня назад
Captain Teal you're AWESOME 👍😎 - love the way your family takes care of each other. Teal, Linh and Emma + Compass are a real TEAM working together for harmony & prosperity. Smooth sailing and exploring. Remember to VOTE‼️‼️‼️ 💙🇺🇸💚😇👍
@crowdfundcrew
@crowdfundcrew 23 дня назад
Always something - a starter is generally an overall smaller issue. Beautiful scenery. I had to take a mtg and paused it for my background until mtg was over. Donate for a Dream
@AG4KN
@AG4KN 23 дня назад
Per the stearing gear, add a protective coating to the metal to inhibit corrosion?
@randalltowers2097
@randalltowers2097 23 дня назад
Translation please! Bah yeh nah, bah yee nah. One is whale, the other is anatomical. Spanish is really cool in that vowels each have but one sound, stressed or unstressed. E is a and I is e. Diphthongs aside. B and V have virtually the same sound, so you might get snickers being in the wrong bay! 😂
@user-bj3jo4mg6m
@user-bj3jo4mg6m 24 дня назад
Have you considered a hard hull for your new dinghy? No more inflatable issues for life. Hmmm ?
@OnboardLifestyle
@OnboardLifestyle 21 день назад
We are considering all options at this point.
@RenegadeADV
@RenegadeADV 24 дня назад
Teal, it would be worth the while to put some lanolin in there on that key and the fittings, it seems like you may have some dissimilar metals corrosion going on with how that key looked. Lanolin will slow that process way down.
@erikowren7894
@erikowren7894 23 дня назад
Boat work in exotic and exciting locations all over the world. Love ❤️ it.
@NVPhotography
@NVPhotography 23 дня назад
i can recommend the bamboo lab printers. just got my A1 and AMS lite huge huge upgrade from my ender 3 pro. The bamboo lap printers do pretty much everything it self levels and cleans the nozzle with the ams you can do multi color prints without stopping the print this is great for you guys and it is really fast. if you are serious about printing carbon fiber make sure you get a hardened steel nozzle cause the CF filament eats the brass nozzles for breakfast
@dgrant2467
@dgrant2467 23 дня назад
If you get a 3D printer, you'll be in good company! Mads - Sail Life, and Ty - Sailing Dauntless, both have 3d printers and use them. All the best!
@maccant4707
@maccant4707 23 дня назад
Had that problem with the car, had to start it with a screwdriver. Hopefully it’s just a solenoid.
@patrickmcsweeney5043
@patrickmcsweeney5043 23 дня назад
Yet another great video. You all do such a great job sharing your experiences. Thank you.
@glencrandall7051
@glencrandall7051 23 дня назад
Good fix for the rudder linkage. Thank you for sharing.🙂🙂
@_mysilentblue2227
@_mysilentblue2227 23 дня назад
Follow us on our journey to beautiful exotic locations insearch of parts and to do boat repairs. Love you guys.
@robertjeter5984
@robertjeter5984 23 дня назад
Looking great guys all of you !
@karlfair
@karlfair 23 дня назад
Nice fix on the rudder.
@kimblemooney2757
@kimblemooney2757 23 дня назад
Really look forward to your weekly video. Thanks
@redbugg99
@redbugg99 24 дня назад
Im curious... What is that starter motor part number. All it need are brushes similar to a: car starter brushes, easy to replacethem In the future you may carry that insted of a heavyweight thirt spare starter.
@tlowe2502
@tlowe2502 24 дня назад
Thanks guys, we enjoyed the video as usual. GO COMPASS. 👍🏻💕🐾🍖
@robinhoward9113
@robinhoward9113 23 дня назад
safe travels
@richardblackwell874
@richardblackwell874 24 дня назад
Teal, to use one of my late father's barnyard aphorisms, you're hunkered up like a dog in a butter-churn. But it could be worse....it could be the case that you DON'T have Linh's lovely smile beaming down at you while you're in there.
@timf6916
@timf6916 24 дня назад
Hehehe. You can overcome. Great looking 👀 Place.
@mikemoxley9477
@mikemoxley9477 23 дня назад
Another great video, good luck on the starter repair!
@Anne6621
@Anne6621 24 дня назад
the opening song is like a cross between Michael Jackson and Alanis Morissette
@CousinTito
@CousinTito 24 дня назад
Oh wow a 3D Printer would bring things next level for this channel and the maintenance 😃 But where would you put it?? 3-D print a Dingy? j/k lol
@atomicdiscobiscuit
@atomicdiscobiscuit 23 дня назад
starters are easy to repair. usually just a little sanding on the contacts to eliminate the corrosion. easy easy easy. it sounded like the solenoid wasn't engaging the bendix...
@genewaddlerandomstuff2122
@genewaddlerandomstuff2122 24 дня назад
I was running a bit late this morning but I got here. I'm glad I don't have to try to fit into those spaces to work on the steering linkage.
@pattieh5118
@pattieh5118 24 дня назад
Aww wish you were having a good time basik crew
@faircompetition1203
@faircompetition1203 18 дней назад
A sharp tap with a hammer will often revive a starter for one or two more starts. A spare starter is a must for cruising .
@genewaddlerandomstuff2122
@genewaddlerandomstuff2122 15 дней назад
The hammer tap was the first thing he did.
@trevhedges209
@trevhedges209 23 дня назад
Cheers guys! 😊
@dclements54
@dclements54 19 дней назад
They would have to talk about a 3D printer while Teal is wearing is Dauntless shirt (they love their 3D printer over there).
@lacfilms8345
@lacfilms8345 23 дня назад
The Onboard Lifestyle of Teal fixing things again. It's a never-ending battle this time without thickened epoxy involved. If that starboard rudder linkage had issues- you can be sure the port side one will have issues too at some point. Somehow- I envisioned the old game of Whack a Mole as Teal pops his head out that hole. Linh with a pool noddle- waiting for him to reappear. Emma- you look good with your hair up like that- don't think I've seen that look from you before? Cooler on your neck. How did you do on your physics test? I know you passed it with flying colors. Compass- makes an appearance. I want that hermit crab- let me at him. My day is better already. The crew of basix is about to leave- and the starter says.... I don't think so. It's always something. This video is probably months behind real-time- so I assume the starter was fixed, the dingy has been replaced. Most likely basix is sailing in Caribbean waters. Safe travels gang.
@hlynnkeith9334
@hlynnkeith9334 22 дня назад
7:10 Pretty smile. :-D
@fulltimber
@fulltimber 23 дня назад
Teal, maybe time to consider an Aluminium hull Cat. Plukky and Brian are already building theirs, as I'm sure you're aware, for Adventure Passage making lifestyles😊
@linhgoben7224
@linhgoben7224 23 дня назад
Don't give him ideas! Lol 😂😂😂
@fulltimber
@fulltimber 23 дня назад
@linhgoben7224 Teal isn't silly, I'm sure he's well aware of what's going on in the sailing community, and how to manage maintenance challenges, and also what are sensible financial and low stress risks for the 3 of you . I'm sure you guys continually talk about your goals , destinations , conditions that you all wish to achieve and enjoy and also what Basik can handle comfortably with ease. Hopefully I wish to meet Brian and Kazza soon in a couple of hours at the Sancutary Cove boat show. Only 2km from my place. Fair winds Linh & Teal
@alleycat5472
@alleycat5472 22 дня назад
Did you try the tap with a hammer on the starter, then the solenoid if tapping the starter does not work. Just a light tap, could do it. May get it to start that way a few times, before it totally gives out. Thank you for sharing. Also like a previous follower suggested, cleaning connections. I see you do amazing things, starters are not that hard, you will do well. Good Luck.
@bfleww
@bfleww 23 дня назад
feel your pain
@redbugg99
@redbugg99 24 дня назад
You are going from .... Wale bay to horseshoe Bay 😎🤔😁😁😁
@redbugg99
@redbugg99 24 дня назад
I was told it translated to this .....
@paulhumphreys9615
@paulhumphreys9615 17 дней назад
aaaaaaaah the Serenity......... no wait, there is other sailors everywhere sigh! ...........I'm guessing that being this close to the states, it's near impossible to get any of these anchor spots to yourself anymore ?!
@martinjjnoagenda5536
@martinjjnoagenda5536 23 дня назад
That key appeared rusted away. Maybe it's not under engineered but an electrolysis problem with different materials and/or seawater?
@Zuluknob
@Zuluknob 22 дня назад
Get a resin printer (msla) and engineering (tough) resin. Carbon fibre fdm suffers from layer separation. Plus msla is far finer finish. Though you might have to build some kind of gimble so the resin doesn't slosh about.
@pierre.a.larsen
@pierre.a.larsen 24 дня назад
You sure have your share of problems with the engines. If the problem is with the starter you could buy an extra for spares next time. Or buy a rebuild kit for the old one.
@ShaneEngelman
@ShaneEngelman 22 дня назад
We've got a Prusa Mini + 3D printer onboard.
@jonathanvince8173
@jonathanvince8173 23 дня назад
I think when you get chance get a company to make a real full on stainless steel whole thing made for you. Carbon fiber is limited to its use and is not as strong as stainless steel and would wear faster. How I know is I used to work with Plastics and carbon fiber. It has limits to be used and it can't ever be reused or recycled. If they can make it in to tiny bits perhaps use it for roads with tarmac.
@greatpix
@greatpix 23 дня назад
Odd coincidence, Teal mentions the engine on Basik is 20 years old and just just minutes before I started watching this video I was putting away the clean dishes and realized that my Correlle Cornflower Blue dishes were 50 years old and still being used every day. Think I got my money's worth?
@MichaelrennieG
@MichaelrennieG 23 дня назад
Tesla has come out with "Steer by wire" in the Cyber truck this eliminates all the mechanical from steering to wheels, I think this could be the future in boats, think about it, the rudder would have an actuator thats controlled electronically by wire instead of all those parts that break all the time
@Xalta_Sailor
@Xalta_Sailor 23 дня назад
As he has just shown; electrical stuff doesn’t always work perfectly on a boat. Does this really sound like a great “improvement” or more like how EV’s are an improvement over reliable cost effective ICE vehicles?
@frank-peter2736
@frank-peter2736 24 дня назад
👍👍👍
@daner.d
@daner.d 23 дня назад
i bet if you take the starter apart it just needs to be cleaned. (brushes and what nots) or you have a rusty ground somewhere,
@BoatingJourney
@BoatingJourney 19 дней назад
Great episode. See you are still using your Rainman. With so many cruisers always having issues with their built in water makers have you had any issues with your system?
@OnboardLifestyle
@OnboardLifestyle 19 дней назад
I think most issues people have with their watermaker is self inflicted. These units must be used once a week and back flushed properly after every use. The more you use it the healthier they run. I see so many cruisers pull into a marina and not use their WM for months on end without pickling it properly. Our Rainman has performed well over the last few years with no complaints, we love it!
@michaelzakharoff946
@michaelzakharoff946 22 дня назад
Just take the starter apart and clean the brushes.
@curacao11
@curacao11 24 дня назад
😎
@codegame027
@codegame027 24 дня назад
Have you crossed paths with Zach and Becka from Teleu yet?
@darrellpugh6186
@darrellpugh6186 23 дня назад
I made a comment on Teleu about that and they said they are behind them, missed them at Panama Canal. Basik being further South.
@basiaboy
@basiaboy 23 дня назад
3d printer is cheap but the carbon filament eek 😱
@greglight3745
@greglight3745 24 дня назад
Starter or voltage ?
@OnboardLifestyle
@OnboardLifestyle 23 дня назад
Starter not voltage
@basiaboy
@basiaboy 23 дня назад
Jump start it with your screwdriver
@genewaddlerandomstuff2122
@genewaddlerandomstuff2122 23 дня назад
The starter has to be functional for that to work.
@AntoineGrondin
@AntoineGrondin 23 дня назад
It's the second episode in a row that I notice you play k-pop in the background. Are y'all having a k-pop phase? 😆
@The_Riddler21
@The_Riddler21 24 дня назад
✌️❤️👌
@SADIK19631963
@SADIK19631963 23 дня назад
🧿👍
@gmcjetpilot
@gmcjetpilot 23 дня назад
7:08 Linh is smiling big time when she heard FIXED.... Ha ha. Made me laugh. Teal, yes I anticipated this and had the design and parts ready to go. Ha ha. OF COURSE! Yet no spare starter or fix with Linh's hair pin, electrical tape, crimp connector, WD40 and two whacks with a wood mallet? Slipping Teal. MacGyver that starter. Ha ha.
@AceMustang-ql9ws
@AceMustang-ql9ws 21 день назад
I didn't see you put any Grease on that rudder pivot shaft.
@damoncarlos2796
@damoncarlos2796 22 дня назад
Did you try smacking the starter with a hammer ?
@OnboardLifestyle
@OnboardLifestyle 21 день назад
That was the first thing I did.
@craigdowd1017
@craigdowd1017 23 дня назад
Dinghy ... "Fix-a-flat" ?
@gfroese4799
@gfroese4799 21 день назад
Just get a bigger hammer
@imiloa.
@imiloa. 23 дня назад
2:19 rough seas??
@linhgoben7224
@linhgoben7224 23 дня назад
Lol, it was more likely the overnight conditions that caused the issue, but as usual, the footage doesn't turn out. 🤣
@imiloa.
@imiloa. 23 дня назад
@@linhgoben7224 ahhh, so true -still, we love watching your journey 🤙🏽🌺
@jaredcolahan759
@jaredcolahan759 22 дня назад
ya change the into, to be honest I really liked the old one, but also like the new.
@tracyraley4003
@tracyraley4003 23 дня назад
You do know that you are tourist don’t you?
@linhgoben7224
@linhgoben7224 23 дня назад
Yes we are. We try to be inconspicuous as we travel and experience our environment. Unfortunately, we have observed and bear witness to some "bad behavior/entitlement tendencies" of some fellow tourists that makes some locals become a little resentful so we try to steer clear of some if these hotspots. No hate on how anyone travels. Just an observation. 😊
@tracyraley4003
@tracyraley4003 23 дня назад
@@linhgoben7224 wow 😳
Далее
Was Costa Rica Worth It? - Onboard Lifestyle ep.298
16:08
Let's Do This! - Onboard Lifestyle ep.296
19:49
Просмотров 31 тыс.
I sailed in a North Sea Winter STORM. Final part.
37:31
Serious Boat Jewelry
18:54
Просмотров 57 тыс.
Get Off the Boat Now! | S09E13
19:18
Просмотров 152 тыс.
This One Simple Hack Cleaned Our Drinking Water
19:29
$1 TRAWLER?
17:58
Просмотров 143 тыс.
Why We Did NOT Register Our Boat In The USA
16:01
Просмотров 514 тыс.