No video :(

Breaking the Colorado on Ultimate Adventure

Подписаться 80 тыс.

Просмотров 41 тыс.

50% 1

So this years Ultimate Adventure did not go as planned, with arriving late due to a speed sensor issue with the 4L60E transmission, to having the transmission pump seize on the start of day 4.
But in the end it was fixed and back for the last day of wheeling.
Where to get the good:
Welders: esab.com/us/na...
Plasma Table: www.fastcutcnc...
Fab Files: www.diyoffroad...
#fabrication #offroad #vlog
For merch visit www.bigtiregarage.com
Follow me on social
IG: / ianfrombigtiregarage
FB: / iansbigtiregarage
App: www,digitalLUG.TV
DISCLAIMER:
Due to factors out of the control of the Big Tire Garage, we cannot guarantee against improper use or unauthorized modifications of this information. Big Tire Garage assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Big Tire Garage recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Big Tire Garage.

Опубликовано:

23 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@bungieking9468 Год назад

I am amazed you can do so much wrenching in such a small amount of time by yourself. Props!

@nicsimon2575 Год назад

I'm so stoked to see that you're keeping the crawlerado around. I've been building and wheeling my 2008 Canyon and it brings me an unreasonable amount of joy to see you join the #355nation with possibly the most badass 355 in existence. We passed by each other at Hot Springs last month but you were in the bomber. Hopefully one day I'll see ya with the crawlerado on the trails!

@BigTireGarage Год назад

Hope to as well my friend.....I think it I get some of those creature comforts pack into it....it will be great!!!

@JohnAnderson-ut6bs Год назад

Man I’m so excited for this years UA footage to drop! It’s all southeastern parks.

@ja5onl6 Год назад

Really wish there was more build on this. The couple short videos over on motor trend and the extras for your channel left me wanting more. I could see building a rig like this to go out into the Mountains here in western Montana to do some prospecting.

@bungieking9468 Год назад

I too have been wanting soo much more build content on the Crawlerado

@keefespencer1173 Год назад

What I liked most of the footage from the UA ride was that all the trucks that I say were older homemade rigs and not a brand new Jeep with a lift kit tires and a winch or a brand new Ford Bronco with the same package done to it oh and I almost forgot new bumpers and maybe some rock sliders and some skid plates and lights everywhere all the rigs I saw were all different from the next and they were all probably built in someone's home garage or their backyard under the shade tree

@MacsSpecialitiesMotorsports Год назад

Yes, Some UA content!! love it 😍

@MacsSpecialitiesMotorsports Год назад

BTW sorry about the bad luck!!

@BigTireGarage Год назад

Shit happens....parts get fixed...its all good!!!

@MacsSpecialitiesMotorsports Год назад

@@BigTireGarage and You rock it-Optimism when the sh!t does happen’

@hawaiioutdoors Год назад

Alwayz enjoy yor fab werkz & creations from back in da day... yo. Glad yor back on Motor Trend... Best Vibs

@BadlandIndustries Год назад

Keep the rado alive. I'm on year 15 with mine and finally building it the way I've dreamed. 40s and an aussie style canopy.

@apexedmedia Год назад

Im just jealous all these Colorados ending up on UA and my truck was one of the original axle swapped trucks lol 😂 maybe one of these years I’ll be able to get in now that I got my old Colorado back lol

@MrDJLois Год назад

That is a very nice looking rig. Even more impressive that it is close to the holy grail of tough off-roader and stable on the highway. It really looks like a great base for offroad camping all the way around...did I say it is nice looking 🙂

@HighGearAutomotive Год назад

Cool build. Was a little surprised to see you go with the 4L60 when I saw the clips from over on MT's channel. Thanks for the content.

@autotek7930 Год назад

If yall need another project I can lend you my xj for a while. It don't need much. Is Just an exocage, one tons, ls swap and true 4 link front and rear. Just throwing that out there lol. Ya'll living the good life man. Glad to see ya doing so well

@jasonplanck1481 Год назад

That's cool looking, Ian !!! I like it

@Livin2relaxat55 Год назад

Love watching all the UA content! Sorry we couldn’t see more of your rig! Does your family ever wheel with you and if yes, what are their builds?

@justacoupleofkids320 Год назад

You can weld short pieces of square tube to the four corners on the cab and then slide a smaller square tube into each corner pocket and lift on them, see Matt’s off-road recovery big wrecker…

@CarlLemmeAvera Год назад

can't wait for the red carpet to be rolled out for the Premiere!

@sledfool1972 Год назад

If you ever decide to “flip it” I would love a shot at it. I have a year of planing and part purchases to build Colorado like that style.

@austin.stanfield Год назад

Great to see this worked so well and was so stable. Can you explain how you choose your ride height on vehicles, specifically pros and cons of different up/down travel ratios?

@blueduster74 Год назад

Sounds like the the front pump or t/conv.

@Mr-_-Leo Год назад

You are a RawkStar!!!

@nickjtierney Год назад

Hey love what your doing with the channel! I know you are spread thin with filming other shows, but where can i find the content to keep up with all your builds? Cheers from Canada.

@dogpotter Год назад

thanks for sharing really enjoyed the video too bad you had a breakdown but glad you were able to get it going so quickly

@BigTireGarage Год назад

Yeah it sucked...because the truck was working sooooo well

@bobsterner5597 Год назад

So what was the real culprit of the engine/transmission locking up? Torque converter, something binding, starter area since you heard noice round starter area? You are the fab king. Been watching you since you were building with Jesse. The Scout 800 was my favorite since my first vehicle was a 1970 800A in 1987. 👍👍👍

@chillis28 Год назад

👍👍 Always interesting!

@davidballoid2118 Год назад

Ian, just curious to know what broke inside the transmission and how it happen, is it up-gradable? If you decide to do a trans. tare-down it would good to do a follow up.

@hoagiesherlin7732 Год назад

Nailed it

@bassment03 Год назад

Great content ian

@BigTireGarage Год назад

Thanks for watching

@bassment03 Год назад

@@BigTireGarage thank you I love the woods working on my jeep and off roading with my buddies and I have zero money or time to do any of it. Your content gives me a window into the life i love thanks again and keep up the spectacular content.

@christopherconkright1317 11 месяцев назад

I would fender from and back

@dakotajohnson6472 Год назад

Living in TN (I also do) do you ever go to windrock? I’ve went once in a rented sxs but I’d rather have a trail rig, so I’m asking what is your idea of a budget rig that works well there? It would also be a bonus if it could seat 4 or 5 people. Thanks

@soldierski1669 Год назад

I shared your method of welding the axles to the frame to set up your suspension in a FB M-715 group. Never set up a suspension before and am swapping in a 07' SD D60 with a WFO radius kit into my M-715, haven't figured out my ...alot but it's tacked in..kinda. you're happen by VA and want to make a video of subscribers M-715 .. could use the help.

@JamesTLangford Год назад

My Question is instead of fenders , have you thought of moving the tool boxes out more? Give tire coverage and more working space between.

@BigTireGarage Год назад

I have but I want them to stay tight with the cab....worst thing that could happen on the trail is getting it jammed into a tree when off camber

@jamespresnell1421 Год назад

QUESTION: What is your general list of spare parts that you tale on Ultimate Adventure? I'm curious what kind of parts are typical... hubs, drive shafts, etc. Someday hopefully get my FJ40 picked! Thanks

@robtrudeau1447 Год назад

Ian, i've been watching as most people have since xtreme 4x4, Just re-watched your CNC video and I love your Fastcut table but it's way for my 24 x 30 garage, for a guy just self-learning to build, what small table would you recommend? I was thinking of a 4x4 table.. Keep up the wheelin' and look forward to your videos all the time.

@evo2racer8029 Год назад

The "Colorado"... translation: the fully custom built rig.

@yermoffroad Год назад

Jonny joints only on the rear of the leaf? This intrigues me... more info on this? I'll get to the Googleing

@corymagoffin8402 Год назад

Truck would look great with bobbed fiberglass bedsides.

@gregchatham3890 Год назад

Just curious Ian, what was the total cost with the parts and labor for this project build, being the cab was $150? It was awesome with everything that you have on it. What was the area in the transmission that actually broke, was it in the throttle body, being the engine wasn’t seized up? Awesome job with the suspension, not quite plain but simple!

@BigTireGarage Год назад

Total for this truck was just over 20K all in...I thinknit was the pump, I have not torn it down yet

@randyjohnson3712 Год назад

Sucks that it broke on you but at least you were able to make it ack for the last day. What actually let go in the transmission???

@lynnbell6374 Год назад

Will you tell us what went wrong with the tranny before you drove down there and how you fixed it. Wish you had more vids, I want to watch on for every day you actually work on it.

@BigTireGarage Год назад

Trans pump siezed

@Skagitrover Год назад

@@BigTireGarage not enough clearance?

@BigTireGarage Год назад

@@Skagitrover Nope...just a part failure.....this engine and trans were in a truck together when I bought them....I knew I should of rebuilt it myself....but figured since it was "known good" it would be fine....but nope

@mastermoarman Год назад

You going to do quick disconnects on heater and ac aswell?

@BigTireGarage Год назад

Right now there is no heat or AC, but when I add it...yes I will have to

@johngrant1337 Год назад

good video sorry about the trans. problem you just roll with the good and bad that life. thanks

@RedHawkish Год назад

Motor trend link? I want to see how this was built. I have a colorado zr2

@jameswriston6952 Год назад

Converter might have taken out the thrust bearing in the engine. Need to measure crankshaft play.

@BigTireGarage Год назад

Engine is fine that is an issue that used to happen with the 400THM behind early versions of the LS

@TheTjmike Год назад

Did that gladiator at 2:02 had the 4xe charging port 🤔

@BigTireGarage Год назад

No it is an aftermarket add on that uses the 4xe port for on board air

@truedeadman Год назад

So...in hindsight, is there anything you would do differently drivetrain-wise(engine/trans) if you were to go back and build the truck again?

@BigTireGarage Год назад

4l80...and some small other changes that will be addressed in a future video

@stevec5280 Год назад

I'm really curious how the trans failed. Being an automatic, the pump had to have locked up. That's the only thing I can think that would "lock up" the engine solid.

@BigTireGarage Год назад

Exactly...yeah from what I can tell without tearing it down....the pump vanes chewed into the housing locking it up

@stevec5280 Год назад

@@BigTireGarage That's a fairly rare failure from my experience. Was it a referb unit?

@BlackAndBlueGarage Год назад

Love it. Manche time? 🤓

@BlackAndBlueGarage Год назад

Just kidding. Tough luck man take a day off

@BigTireGarage Год назад

Working on the bomber right now.....but Manche after that

@markmacdonald6452 Год назад

Your tough to try and get it fixed. The mods didn’t fail, just the GM stuff, go figure?

@tomkelly3896 Год назад

So what broke?🤔🤔🤔

@brianschmidt2747 Год назад

My friend question okay air lockers or non air lockers. Budget minded not rock climbing. Thanks my friend

@shanewright6958 Год назад

👍👍

@RightHandy13 Год назад

Ugh gotta wait 7 hours

@NotaRobot_gif Год назад

Yeah so annoying!

@scotthackl3718 Год назад

Perfect package may have a manual transmission instead. Lol

@BigTireGarage Год назад

I should of went 4l80...but I can fix this one

@frediefarmer Год назад

👍🏽🇺🇸👍🏽

@Kevin90909 Год назад

So that truck is sponsored - having missed days what happens do the sponsors just acknowledge breakage happens or do you owe them money, time or something?

@BigTireGarage Год назад

Sponsors know how the world of off road works...