Prepping a Jeep for eBay

Подписаться 80 тыс.

Просмотров 42 тыс.

50% 1

this week the Shop Truck has to be prepped for the eBay motors Parts of America tour that kicks off in Moab just before SEMA. I grabbed a pile of stuff from eBay Motors to get the Shop Truck ready.
link for cold air intake
www.ebay.com/itm/314229326902...
Best Wheel Base for Off Road Rig
• Best Wheel Base for Of...
What Happened to the Suzuki Samurai
• What Happened to the S...
My Favorite Builders
• What happened to the 6...
Learning CNC Plasma
• Learning CNC Plasma, W...
Where to get the good:
Welders: esab.com/us/nam_en/
Plasma Table: www.fastcutcnc.com/
Fab Files: www.diyoffroad.com/
#fabrication #offroad #vlog
For merch visit www.bigtiregarage.com
Follow me on social
IG: / ianfrombigtiregarage
FB: / iansbigtiregarage
App: www.digitalLUG.TV
DISCLAIMER: Due to factors out of the control of the Big Tire Garage, we cannot guarantee against improper use or unauthorized modifications of this information. Big Tire Garage assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Big Tire Garage recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Big Tire Garage.

Авто/Мото

Опубликовано:

12 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 134

@rustycannon712 Год назад

My favorite build of all the ones Ian’s ever done. I’m a YJ guy saving parts to build one.

@gimbalair4221 Год назад

I love my YJ best jeep I have ever had

@derekbuxton7101 Год назад

One of my favorite builds of all time plus if I remember correctly Kevin helped with the Fauxtina (I bought his book). Here’s a question - have you ever considered putting together an offroader’s bible … a compilation of all your knowledge and tips and tricks? As a former high school shop teacher I am sure you could put together a great guidebook.

@BigTireGarage Год назад

Yes he did....I painted the "Base" colors and then Kevin did the final color and did the final Fauxtina sanding

@paintucation Год назад

@@BigTireGarage THe coolest thing about a paintjob like this is that it only gets better, crustier, and cooler as time goes by and it degrades. Repairs are forgiving too. :)

@kennethhudson8013 Год назад

Cheerwine originally bottled in my State NC

@HELUVJEEPS Год назад

Ok here's a question for your next Q&A.....What is your daily driver and what do you use to tow your jeeps to different events when you go cross country??

@JeepinJoe Год назад

Enjoyed meeting you and that Jeep in Moab during the Jeep Jamboree!

@Screwfly1 Год назад

Great video. You're the only guy I know that can say he's got a few quick things to do to a truck, and pull R&P, add gauges, swap radiator.. LOL. Just shows that having the right tools and know how can make shop work easier.

@PaulKaiser42 Год назад

One of the best!!! Between the shop truck and lockjaw it must be difficult to choose how to go to work in the morning….😂😂😂😂

@mrplasma2891 Год назад

I love this truck! Can't get enough of seeing it!

@BigTireGarage Год назад

Thanks, it is one of my favorites

@jordonjacobs1749 Год назад

I haven't watch you in a very long time well since you had the show extreme 4x4 when I was growing up puddins fab shop is where I just found out aboot your channel can't wait to catch up on what you have going on can't wait to see what's new!!!!

@tomkelly3896 Год назад

Get a sticker of a missle for the storage can🤓

@vicgustafson8514 Год назад

Great video at the right time. I'm having Crane Axle build a 14 bolt housing for the front of my YJ. It's cheaper than what I can get the housings for. I'm interested on how the mechanical front locker works on the trails. I was always told it would be harder to turn around obstacles. Most of my riding is trails with a lot of trees. I actually bought the the leftovers of the same intake kit you bought on eBay for a third of the price of a complete kit and still have more than enough pieces to finish my air intake.

@jasonp9284 Год назад

I remember you making a front 14 bolt on Extreme(many years ago). I would love to see you make another with real in-depth detail.

@BigTireGarage Год назад

Cool idea!

@javanbybee4822 Год назад

@@BigTireGarage another idea would be use a pair of 9.5 inch land cruiser axles under a rig! a build video with a standard 8' front would also be sweeeet

@jasonp9284 Год назад

I loved the full-size Blazer you SAS’d so much I bought one myself. Got a drivers side drop axle from a Cherokee chief I want to put in it. Hopefully it’s wide enough as it’s in pieces now. I don’t want to go super high. You’re someone I’ve looked up to for a long time. A bit of a hero.

@randycobos3142 Год назад

This truck inspired me to build one with my cj years ago when I first saw it. Unfortunately I got about half way through and haven’t been able to finish. One day it will look this cool though.

@CameronShute Год назад

Been watching you build stuff since I was a kid. And that won't change. But if the music could wait until you're done talking, that would be awesome.

@simonfreer9076 Год назад

Frig. I love yj. And that is quite the build.

@rickyjohnston3000 Год назад

Love The Shop Truck! Man I'm old! Looked forward to all those Extreme shows! I'm really liking that Jerry can set-up! That would work great on my flatbed! Was that covered during the original build? Would like a little more info...

@MrJoshItIs Год назад

I have a TJ, fairly built, but no engine swap nor won-tons yet. This is Jeep goals. Always wanted to turn it into a truck. Only think I might do different would be aluminum flat bed, Oz ute style.

@BigTireGarage Год назад

That would be cool

@jamesplatt1352 10 месяцев назад

Thought to myself, you could have plugged the ginormus whole to make it look factory, but what the hell. Let's cover it up 😊 What a wonderful world! (Just to complete it)

@johnjankowski1615 Год назад

Love it. What frame did you use and what's the wheelbase?

@thomashayden4522 Год назад

Man if I ever win the lottery I'll let you go hog wild on my 68 F100 4X4 short box. Love your work!

@reecewatson5311 Год назад

I must have missed it, but where are you headed? My son Cayson told me to tell you hello. I brought him out last time you came to Hot Spring ORV Park. Mohawk child, we skipped school that day. Yes, I let my child skip school to see his favorite TV show host. Moab, be safe. Weather has been kind of funky. I need one of those cans for my small chain saw...

@chrisforsythe6175 Год назад

Aqualu, right here in my hometown..

@Warr-Path4X4 Год назад

That fuel tank filler is a sweet setup.

@don_crawla6195 Год назад

Did you run rtv on the threads on them adjuster/seals? oil will seep past it if you dont. great vids man!

@MrDharris62 Год назад

Love the rig, why are more people using Hydro boost instead of vacuum assist?

@kennethhudson8013 Год назад

Cool Truck

@BigTireGarage Год назад

Thanks, I really like it as well

@michaeljones2960 Год назад

Ian when are you going to build a wicked Willy's wagon with Stacy David? I've grown up watching the both of you build some awesome ride's over the years. Can you please get with him and build one up before he retires. You 2 are the reason why I became a certified mobile diesel tech. I love what I do for a living. On the weekends I enjoy 4wheeling on the Rubicon jeep trail and Fordyce Jeep trail. Keep up the great work you guys are doing. Some day I'll see you out there on the trails. Merry Christmas Ian from my family to yours

@BigTireGarage Год назад

Awesome to hear!!!

@rickymartin5011 Год назад

Hey Ian, huge fan I wish one day I can meet you. I have a big question about my truck, it's a 2013 F350 crew cab 6.7 powerstroke my question is how can I make my truck turn sharper when it's in 4 wheel drive without it jumping and travel faster down the road in 4wheeldrive. Thank you and Merry Christmas to you and your family

@brandonanderson6843 Год назад

My favorite build

@FiveFourRacing Год назад

Do you have a preferred angle that works for setting up a coil over suspension

@CVisionProductions1 Год назад

Ian. Great channel!!! From a native South Dakota boy about your age, I see that you have a South Dakota license plate in your shop. Is there any significance to that? I also hope that you really enjoyed your time in the Black Hills during ultimate adventure. I don’t live there anymore, but I still make my way out there to go four wheeling and visit friends. Keep up the great work!

@BigTireGarage Год назад

It was a gift from Colt when I used his shop to fix my Race LJ during UA

@CVisionProductions1 Год назад

Cool. Thanks for the reply!

@bma7978 Год назад

Love your videos! One suggestion- your voice audio is much softer than the music. Any chance you could make them the same level?

@BigTireGarage Год назад

Noted!

@fbombfab1606 Год назад

Hey Ian love the show.. i was wondering if you've ever used a donaldson air intake canister for a rig? And how many cfm would i need to have for a chevy 6.0 LS intake. Not sure which one to get.

@BigTireGarage Год назад

I have not....I have built my own that is similar and just put a come filter in it

@randylinders6526 Год назад

Have you ever tried portal boxes on your axels? Like werewolf?

@victorsimpkiss221 Год назад

Hello, Have a question for you dealing with offroad parks. Have you seen and tried the Mammoth Trail at Anthracite Offroad Adventure Park. If not which vehicle would you bring for it?

@zachariahohlman7046 Год назад

Gotta a question for you. This relates to driveshafts. So my jeep right now has stock size u joints front and rear but they are aftermarket adams driveshafts. How do you decide what size unjoint to have or what size is too small. Is it a bad idea to have a u joint be a “fuse” in the system and carry a spare driveshaft. Rather than break something like an axle/transfer case etc

@mudsta9828 Год назад

I got excited thinking you were gonna sell it.

@zd533 Год назад

I thought the exact same thing lol. Damnit...

@BigTireGarage Год назад

Yeah....sort of mean to click bait it....but I don't sell my rigs

@mudsta9828 Год назад

Well it worked! Lol

@abpsd73 Год назад

Speaking of axles, I have a Toyota pickup front solid axle with a slight bend in it that is throwing off my camber on one side (1.5 degree between spring perch and knuckle.) What's the best way to fix? I'd get an aftermarket housing but they are usually 3" wider or more and I want to retain stock width.

@deanhunt5443 Год назад

Hi Ian. Love all your content on all your different media's. I'm building an Overlanding/Offroad rig using a 1948 Willys Overland truck. Don't have a box for it, but I have sourced an aluminum checkerplate flat deck off of a 90's Toyota Tacoma. Planning on constructing a removable Ausie style canopy with a roof top tent to camp with. Will be running a 97 Chevy 5.7l with a nv4500/NWF EcoBox/NP205 twin sticked combination. Axles are Dana 60 front and rear with passenger side housing (drop). Tires will be either 35" or 37" on Hummer H2 rims. My question to you is what chassis/suspension setup would you suggest I build under it? I've seen your vehicles like the Shop Truck, Lockjaw, the Overland Ramcharger, and the M715 you just put together for your buddy on Fourwheeler. Also am in love with your Willys Wagon. I'm looking for my best option for a 365 day/year daily driver that will be probably 70/30 on/off road. Help me out with some ideas. Would love to bring it down to some of the meets in the States when it is finished and show you it.

@BigTireGarage Год назад

For simplicity on a rig like that....I would go for leaf springs all the way around.....simply to build, very reliable and for an overlanding rig you can't go wrong. If you wanted to get a little fancier....go for a three link front with coil springs

@deanhunt5443 Год назад

Thanks for the reply Ian. 3 link front end with coil springs would be like the Shop Truck setup correct? I'm using a passenger drop diff like the Shop Truck has. Who did you source for the spring and link brackets for that build?

@timhorne8126 Год назад

What a the wheelbase on the shop truck?

@Zaclaz Год назад

Got a question. If there was one rig you have built since extreme 4x4 what would it be and why

@jonaathansimons7938 Год назад

Q: I've got a '48 '2A, very rough. I'm thinking to build 'cuz in SD many trails are limited to 62". You once did a 609 hybrid...would that support portals on a light rig?

@dailydriven99 Год назад

I have a question for your q&a. How could a guy with experience become a “behind the scenes “ helper on four wheeler or a similar show? Like lucky costa was on hrg and overhaulin? Love your show and youtube!

@dailydriven99 Год назад

A side question, have you ever wheeled in Oregon? If so where? Browns camp? Dunes? Or central Oregon rock crawling? If not would you be interested in doing a trip? May favorite episodes of DED where their wheeling trips to Oregon, especially the gambler episode (4X4 vans are my fav…long story)

@MikesWeldingPortland Год назад

Hey Ian, wondering where you purchased the gauges from. I have a 79 cj5 with 3/4 ton axles and 37's and need some gauges. Those look awesome I think.

@BigTireGarage Год назад

On eBayMotors.let me see if I can find a link for them

@adamcorntassel5636 Год назад

What happened to the honda powered single seater?

@That_one_channel_88 Год назад

Another question for your next Q&A what wheel size do you recommend for a 40"+ tire? I will be running bead locks and tons likely from a early 2000 Ford with disc brakes.

@BigTireGarage Год назад

17x9.5 or 10

@frontball2754 Год назад

Hey! Love the videos, but could you play with the volume a bit? Whenever the music kicks out, I have to turn up the volume to hear what you're saying, then the music kicks in again and the pictures start falling off the walls here. 😆

@BigTireGarage Год назад

Noted!

@frontball2754 Год назад

@@BigTireGarage Right on. Also, just want to mention that when I seen you on Ultimate Adventure for the first time, I immediately went and subscribed to your channel. Been a huge fan since I was a kid watching Xtreme 4x4.

@gnome_built8533 Год назад

I see an aoaa sticker on the windshield, did you ever wheel there? That’s my home park

@BigTireGarage Год назад

Yep, during ultimate adventure 2018...great park

@MrBlackbutang 3 месяца назад

I wish I could get out of bed not have to do anything with my hair . Lucky dog! Thanks

@nissanv6TT Год назад

Bro got that Wayne static hair

@paulhead Год назад

Where's the build video for the Shop Truck!? Sorry I missed it.

@BigTireGarage Год назад

Never really did one, I originally built this as part of Crawl Magazine....so there was some coverage there....but as for a full build video....does not exist.

@MissionRestomod Год назад

Link to the intake tube kit? I have the cheapo aluminum one for LS truck and I’d like to move it away from the headers and radiator.

@MissionRestomod Год назад

NVM frick! It’s $428… 😂

@SimonElenor Год назад

Could the leaky axle seal come from the fact that there are bot axles in the front diff?

@BigTireGarage Год назад

What do you mean "bot" axles

@tymatt89 Год назад

Ian what is your best and worst wheeling trip story's that you have been in the past?

@bcmandel Год назад

I really like to idea behind your race Jeep, been thinking about building one that I can use to wheel and then race at KOH EMC. Was wondering what would need to be done to make it eligible to race at KOH in the modified class, and what would need to be done to help it from cooking the trans like you did on UA?

@BigTireGarage Год назад

To be Ultra 4 legal you just need to ditch the trailing arms in the back and move the shocks onto the axle. After A LOT of diagnoses the issue with the trans was due to a "questionable" rebuild and poor TC choice. I went through the trans before EJS last year and put the parts that were "supposed" to be installed by the rebuilder and set clutch pack clearance correctly....ever since then trans has been fine.....I would though would prefer to have a 4L80 in it though.

@bcmandel Год назад

@@BigTireGarage Would it be difficult to add mechanical steering if I wanted to run 4500 modified class, or should I just go 4800 legends?

@danielbaker4395 Год назад

Is that gearhead coffee any good? I wonder that every time I watch your videos on here.

@BigTireGarage Год назад

I really like it......the Gear Oil is my favorite

@koreywilliamson3737 Год назад

Here's a question for you do you still have your nissan titan with the cummins? If so how do you like it for towing and have you had any problems with it .I have a love hate relationship with my 2016 titan with the 5.0 cummins

@BigTireGarage Год назад

That question is in a QandA coming up soon

@TwistedOff Год назад

👍

@jeepguy1337 Год назад

What hard top do you have on this? Looks shorter than the gr8 truck tops

@BigTireGarage Год назад

It is the Gr8 Tops top.....but not the one they use for the Jeep LJ conversion....it is a Scrambler top I believe

@LScout800 Год назад

Any videos or anything on the buildup of this rig? Did not see anything on your channel.

@BigTireGarage Год назад

Not really, but I will bringing it in for another "refresh" soon after driving it for the eBay Motors shoot I fell back in love with it...so you will see some videos on it soon!!!

@johnmiller2381 4 месяца назад

I’d love to see what you did on the frame with this one. With the brute kit NLA, my only option is to stretch the frame myself.

@rkendsley7561 Год назад

What's up with Season 4, Episode 9 on the Overlanding trailer? Each time I tried recording it on the MT Channel, via DirecTV, it's one of the other episodes. Did it get pulled for some reason?

@BigTireGarage Год назад

No idea...I know the name on that ep is messed up because I did not build an overlanding yrailer

@randumadventures Год назад

You ever used SpeedHut gauges? They would have been perfect for this

@BigTireGarage Год назад

I have seen them....and like them. Maybe for the next project

@randumadventures Год назад

@@BigTireGarage I found them 10yrs ago and they are the only gauges I have used since then. I particularly love the big combo gauges and gps speedos

@69xr7ragtop9 Год назад

Love the video, but music is way too loud and could not hear your comments when you first started working on the shop truck.

@BigTireGarage Год назад

Noted!

@jasontanner5656 Год назад

Is there a build series on the shop truck

@BigTireGarage Год назад

There is not...

@jasontanner5656 Год назад

@@BigTireGarage well darn it anyways. Wish there was

@miguelmaynez8536 Год назад

Ian Q and A question favorite truck build from the show called trucks that Kevin tetz and ryan shand built my question is whatever happened to rolling thunder the truck that Kevin tetz and Ryan shand built on trucks

@trinidadian_jedi Год назад

do you have the suburban gorilla?

@pigasus_1 Год назад

Got a hair cut between the last 2 episodes... Nice...

@randyjohnson3712 Год назад

What ever happened to the old shop truck you did on 4Wheeler???

@BigTireGarage Год назад

Still have it.....its on the list to get done

@madman432000 Год назад

So apparently you don't have any issues with the air filter being open and in the engine bay? Not a cold air intake setup?

@BigTireGarage Год назад

Never have really...the Jeep has a Louvered hood for heat so it gets a lot of fresh air....unless building an actual "snorkel" or running the intake into the passenger compartment this is how most off road rigs are

@madman432000 Год назад

@@BigTireGarage Well I won't worry about my Liberty having the same setup. Filter is where the stock filter housing was

@garywilliams7484 Год назад

You said you have a Turbo 400 and it won’t let you go 80. What would be a better option for dual highway and off-road abuse?

@jasonp9284 Год назад

Probably a 4L80E. Still strong plus OD.

@BigTireGarage Год назад

@kerryrwac Год назад

Would a Gear Vendors overdrive let you do 80?

@BigTireGarage Год назад

Would be easier to swap in a 4L80

@user-xj8le3eo5g 6 месяцев назад

Whats the wheelbase of the shop truck?

@BigTireGarage 6 месяцев назад

Like 120 something

@goat4298 Год назад

Interesting to use a glass cheerwine bottle as a puke tank

@BigTireGarage Год назад

Yeah...it just won't break!!

@shanewright6958 Год назад

👍👍

@tomkelly3896 Год назад

What burr do you use to trim your hair?

@BigTireGarage Год назад

Great Clips

@tomkelly3896 Год назад

@@BigTireGarage nice✌

@larryhall6416 Год назад

The only place to get a dog . Rescue dog are the best. They have lots of love to give and aren't afraid to show it. Also are you amazed with yourself on the builds that you have done? Also is there anything that you wish that you did that you won't ever do again ?

@BigTireGarage Год назад

She is the best dog!!!