Тёмный

Brembo/M Sport Brakes on your BMW, DIY-new pads/rotors (V3.0) 

The Wrench Lab
Подписаться 2,7 тыс.
Просмотров 89 тыс.
50% 1

**I earn a small commission when you buy products using the links below, at no extra cost to you.**
In case you're wondering what's different. I took out the sections where I mention anti-seize.
Here I'll teach you how to replace the rotors and pads on your Brembo/M Sport brakes by showing you how on my M235i. Just about every single set of 2 and 4 piston Brembo brakes are exactly the same. Super EASY!
Did I earn your support?
paypal.me/pools/c/8dwWmBjUNP
Do you have your BMW Fanatic hoodie? Check out his channel and get your hoodie TODAY!
• How to Bed-in / Burnis...
Even if you've never done brakes before, you can get this done as long as you have the tools necessary.
Send me a message in the comment section below if you have any difficulty during this process.
Bed in procedures - make sure you check with your brake parts manufacturer first!
How to Bed/Burnish brake pads/rotors GO TO 8:45.
• How to Bed-in / Burnis...
Permatex Ceramic Extreme Brake Lube
amzn.to/2YiPfLp
Below are the parts I replaced on my car that I sourced through RockAuto.com. I an NOT affiliated with RockAuto, I do not gain anything if you buy parts from them.
Hardware
Front - CENTRIC 11734047 $6.77
Rear - CENTRIC 11734046 $7.81
Brake Wear Sensor-
Front - ACDELCO 18K2505 $11.09
Rear - ACDELCO 18K2506 $12.76
Brembo Rotors
Front - 340x30 09C39713 $115.79 each
Rear - 345x24 09C39613 $128.99 each
PowerStop Brake Pads - Z26
Front - Z261656 $59.79
Rear - Z261609B $48.79
I'm also going to do a video on what to do if your brake rotors are stuck (rusted) onto your car and you can't remove them from the hub. I'll post that in a week or two.
I hope you learned something from my video and I hope you subscribed to my channel!
Cool?
Later.
Did I earn your support? bit.ly/TipJarMikey
Upgrades include:
JB4 Tuner - bit.ly/JB4_FChassis_N55
JB4 EWG add on connector bit.ly/JB4upgrageEWGconnector
Turner Motorsports - intercooler bit.ly/TurnerIntercoolerN55N20
Carbon Fiber Intake bit.ly/TurnerCarbonIntake
Go Fast Bits - Diverter Valve Upgrade bit.ly/GoFastBitsDVupgrade
Boost pipe bit.ly/BoostPipe
Pure Turbos - turbo inlet pipe Option 2 bit.ly/PureTurbosInletPipeOPT2
Wagner Tuning - downpipe with high flow cat (200 cell) bit.ly/WagnerDownpipe
Upper V-band clamp 4" - bit.ly/TurbotoDownpipeVBandClamp
Small gasket on the turbo - bit.ly/PreCatGasket
Lower V-band clamp 3" - bit.ly/DownpipeMidpipClamp
RCP HID headlight BULBS! These have lasted me over a year!amzn.to/2V5xJfD
Wheel Stud Conversion? look below ;)
bit.ly/StudConversion
bit.ly/Spacer12mm
bit.ly/RentalSpacerKit
Need Loctite? bit.ly/MediumLoctite
Need Anti Seize Libricant? bit.ly/antiseizelube
For the Maintenance items:
BMW coolant - bit.ly/BMWCoolant
BMW engine oil kit - bit.ly/OrigBMWOil
Water pump bit.ly/M235WaterPump
Thermostat bit.ly/M235iThermostat
Coolant hose (connects water pump to thermostat and to the Expansion tank) bit.ly/CoolantHose1
Expansion tank (radiator overflow) bit.ly/ExpansionTankM235i
Billet Aluminum bleeder screw bit.ly/BilletBleederScrew
OEM Cabin Air filter - bit.ly/MANNCabinFilter
Economy Cabin Air Filter - bit.ly/EconomyCabinFilter
Doing an Oil Change? Here you go!
bit.ly/OilFilterKit
bit.ly/FilterWrenchBMW
LiquiMoly Next Gen Oil (the glowing green stuff) bit.ly/LiquiMolyNexGen
OEM BMW Oil bit.ly/OrigBMWOil
Replace that plastic Oil Fileter Cap while you're at it!
bit.ly/BilletOilFilterCap
Doing you own brakes?
OEM Front Rotors - bit.ly/OEMFrontRotors
OEM Rear Rotors - bit.ly/OEMRearRotors
Power Bleeder for your breaks! (best invention ever!)
bit.ly/MotivePBEuro
Bleeder bottles? bit.ly/BleederBottles
Brake FLuid? RBF600 bit.ly/RBF600 or amzn.to/2T5AZVU
Jack Stands? bit.ly/ESCOJackStand
Giant bag of TERRY TOWELS! amzn.to/2SM7PKQ
Want to do some coding on your BMW?
VeePeak Blue tooth adapter amzn.to/33uxAnA
BimmerCode App bimmercode.app/
K+DCAN Cable amzn.to/2YWKvLP
DRAGY Performance Meter amzn.to/2YTpoKg
Tools and such:
Great Torx Bit Tool Set! amzn.to/2uOFRXj
Need Jack Pad adapters? amzn.to/2Vdagci
o2 Sensor Socket - bit.ly/o2SensorSocket
The 100mm long 5mm wobble socket bit amzn.to/2YoPox2
Brake Cleaner - bit.ly/BrakeClean
Mass Air Flow Sensor Cleaner - bit.ly/MassAirSensorCleaner
Awesome Tire Pressure Guage amzn.to/3bQ44gp
Small Extractor Pump - amzn.to/39NHSlb
Replace that nasty black tape in your engine bay with the real stuff amzn.to/2HGnbMc
Dielectric Grease - amzn.to/3bUFJpC
Trim Tool Set w/Case amzn.to/2v3lq8S
As an Amazon Associate I earn from qualifying purchases.

Авто/Мото

Опубликовано:

 

31 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 183   
@arthurrobinson8819
@arthurrobinson8819 5 лет назад
First rate! I’m most impressed by your attention to detail and the meticulous way in which you work. This has to be the “gold standard” for working on BMW brakes and will be very useful for me when I come to change rotors and pads on my M140i. Many thanks Mikey - much appreciated.
@TheWrenchLab
@TheWrenchLab 5 лет назад
THANKS ARTHUR! I really appreciate that! I try to describe and explain everything the best way possible for easier understanding. I hope this helps you when you knock out your brakes! This will save you hundreds of dollars instead of going to the dealer. Ans as you can see, it's really not very difficult. You just have to know what's what. Thanks for checking out my channel!!! Make sure you check out the brake bleeding video too!
@torquesteer2657
@torquesteer2657 Месяц назад
Best video on YT so far on this 👍🏻
@ManjitBatchu
@ManjitBatchu Год назад
Hey man, this was a fantastic video. I plan on replacing my whole set of brakes and pads, and your attention to detail reassures me that it can be done. Thanks so much!
@tlidontknow4326
@tlidontknow4326 3 года назад
You don’t need to sorry for the long video. This kind of video is exactly the one we need!
@chamanrickheeram5099
@chamanrickheeram5099 4 года назад
By far the best tutorial on changing the brakes on my f30. Thanks you the the awesome video.
@TheWrenchLab
@TheWrenchLab 4 года назад
Thanks for the kind words Chaman! And thanks for checking out my channel! 👍💪
@terrancepinkney777
@terrancepinkney777 8 месяцев назад
Just found this and thanks brotha for the attention to the details. I will not be paying for labor to have someone do my brakes in the future! I appreciate the effort!
@racingdaily3674
@racingdaily3674 2 года назад
Awesome DIY. I'm also glad I'm not the only guy who starts a job with gloves and eventually says F it.
@joserios7024
@joserios7024 4 года назад
I hate long videos but this one deserves the attention.The level of detail pays off.
@TheWrenchLab
@TheWrenchLab 4 года назад
I try my best to cut unnecessary time out of my videos! I like to explain what I do and why, to help people understand the process. I like to teach people how to do these projects, not just show them how I do it. If I had a huge following, I would love to do a project like this LIVE! with the chat open for questions and comments. Someday hopefully I will 😁
@DJSUKH300690
@DJSUKH300690 4 года назад
What a amazing video, I like the way you explains things as you go along. Nothing is rushed and cleaning tips are great. Thank you
@TheWrenchLab
@TheWrenchLab 4 года назад
@Datguy Thanks for taking the time and watching my video! The goal was to make it simple and easy to follow along for anyone new to Brembo brakes. I wonder how many shops clean the brakes like this? 🤣
@DJSUKH300690
@DJSUKH300690 4 года назад
With Mikey! No problem, I don’t think many shops do lol.
@zacharyhassan6352
@zacharyhassan6352 4 года назад
Best M235i brake video ever. Thank you!
@TheWrenchLab
@TheWrenchLab 4 года назад
Thank you! And thanks for checking out my channel!
@sonicgli
@sonicgli 5 лет назад
Dude you're so much more prepared than I am whenever I work in my cars lol. Great vid! Look forward to the bleed vid!
@TheWrenchLab
@TheWrenchLab 5 лет назад
I'm not gonna lie... I sometimes film the required tools part after I finish 🤣 The bleed video is out! I actually fixed a few things in this video and reposted it.
@ceezauto213
@ceezauto213 4 года назад
Excellent video. Appreciate how descriptive you talk about every little step of the process. Well done 👌🏼👌🏼👌🏼
@TheWrenchLab
@TheWrenchLab 4 года назад
Thanks Julius! I really appreciate that! 👍🙏 I just try to explain everything the best way I can so everyone can understand and tackle this project.
@ceezauto213
@ceezauto213 Год назад
@@TheWrenchLab Is this the same process for the front brake pads and rotors ? Do you know what kind of socket I need to remove the the 2 caliper bolts for the front ? Thank you
@adrianmdza9485
@adrianmdza9485 4 года назад
You make some of the best DIY videos !
@TheWrenchLab
@TheWrenchLab 4 года назад
Thanks Adrian! I really appreciate you taking the time to let me know you like my videos! I just wish I had deeper pockets and more time to make all the videos I want to make 🤣
@littleroller
@littleroller 2 года назад
Thanks for your hard work on this video. Your description for the video has some great links that I will use for reference.
@martindavidson5670
@martindavidson5670 2 года назад
Great vid, clear concise description with super helpful tips 👍
@popeyepanther4519
@popeyepanther4519 2 года назад
Thanks for the video. I liked and Subscribed. The key with these jobs is to be calm and take your time. Be accurate. Your life depends on it.
@slevinkelevra5619
@slevinkelevra5619 2 года назад
Great video. This guy is very meticulous. More so than most. Impressed. Thanks!
@TheWrenchLab
@TheWrenchLab 2 года назад
Thanks!
@ImRizm
@ImRizm 3 года назад
Best tutorial ever! Much appreciated!
@TheWrenchLab
@TheWrenchLab 3 года назад
Thanks Charlie! I appreciate the kind words and for taking the time to check out the video and my channel!
@auTHORity0492
@auTHORity0492 5 лет назад
Great DIY. I was actually doing my brakes today coincidentally. Everything in here is top-notch and to the T. I think the length of the video is fine, because all those tips are very relevant. Keep it up!
@TheWrenchLab
@TheWrenchLab 5 лет назад
These brakes are super simple once you know what everything is and how it works. Thanks for checking out my channel!
@mathewhenderson5757
@mathewhenderson5757 5 лет назад
Solid video. Great period of instruction
@TheWrenchLab
@TheWrenchLab 5 лет назад
Thanks Big H! 👍
@carsinourdna9388
@carsinourdna9388 4 года назад
WOW. You work like pro. Amazing DIY video.👍🏼
@TheWrenchLab
@TheWrenchLab 4 года назад
Thank you for the kind words! And thanks for checking out my channel! 👍
@vladimirpanchenko4030
@vladimirpanchenko4030 4 года назад
Very detailed video, thank you. Looking forward to work on my 440iX brakes.
@TheWrenchLab
@TheWrenchLab 4 года назад
Once you understand how it all works, it's pretty simple. You got this Vladimir! 👍
@anthonyh958
@anthonyh958 4 года назад
Legend! Perfectly explained and filmed. You have a new subscriber from over the Pond. (p.s I don’t even need to do mine but found this video entertaining!) 👍
@TheWrenchLab
@TheWrenchLab 4 года назад
Thanks Anthony! And thanks for checking out the channel!
@oogento
@oogento 2 года назад
Soo much information, super happy to have learned from you!
@TheWrenchLab
@TheWrenchLab 2 года назад
Thank you! And thank you for checking out the channel!
@tzalwelweetwel
@tzalwelweetwel 4 года назад
This is an awesome tutorial man.
@TheWrenchLab
@TheWrenchLab 4 года назад
Thanks! I appreciate that! And thanks for checking out the channel!
@Spaceman_79
@Spaceman_79 3 года назад
Mate your vid was MUSTARD ( that means very good where i come from in south london ) i felt like you held my hand right through it enough of the man love top man👍
@TheWrenchLab
@TheWrenchLab 3 года назад
Thank you SPACE_MAN ! I tried to break it down so anyone could understand it and follow along. Thanks for checking out my channel! 🤙
@yf1001
@yf1001 4 года назад
Great detailed vid, thanks 👍
@percymchow
@percymchow 4 года назад
Nice work, super super thorough! Thank you!!
@TheWrenchLab
@TheWrenchLab 4 года назад
I appreciate the kind words PC! Thanks for taking the time to check out my channel! 👍💪🏎️
@borsgeorgica
@borsgeorgica 3 года назад
Awesome video!
@penguin350
@penguin350 Год назад
Perfect Video, subscribed!
@ROB.FIVEAMP
@ROB.FIVEAMP 4 года назад
Good video very informative, thankyou.
@philippe2488
@philippe2488 3 года назад
Super vidéo claire et concise! Top!
@TheWrenchLab
@TheWrenchLab 3 года назад
Thanks Billy! 🙏
@Remyp388
@Remyp388 3 года назад
Great video
@jmccarsnmore1025
@jmccarsnmore1025 3 года назад
I guess I’ll still have to buy the retaining clips, but not the pins!! 😂 Great video btw, and here you have a new subscriber!!
@goldenowner728
@goldenowner728 4 года назад
Excellent video!
@TheWrenchLab
@TheWrenchLab 4 года назад
Thank you! 😁
@bengrizzlyadams6187
@bengrizzlyadams6187 4 года назад
Great stuff, thank you ever so much for your time!!
@TheWrenchLab
@TheWrenchLab 4 года назад
No, thank you for checking out my channel Ben! You're the whole reason I do this!
@bigal5791
@bigal5791 4 года назад
Nice video ... will do mines soon .. keep up the good work 😊
@TheWrenchLab
@TheWrenchLab 4 года назад
Thanks Big Al! 🙏I appreciate the kind words! Thanks for checking the channel. Good luck with your project!
@bifftastic2816
@bifftastic2816 5 лет назад
Great diy!
@TheWrenchLab
@TheWrenchLab 4 года назад
Thanks!
@123siusun
@123siusun 3 года назад
Very clear !!!! Good lesson !!!
@TheWrenchLab
@TheWrenchLab 3 года назад
Thanks Andy! Glad you found the channel. 🙏
@Alex-vi8ux
@Alex-vi8ux Год назад
Awesome Video.....Thank you
@lampali
@lampali 4 года назад
Excellent video!!!!!!
@TheWrenchLab
@TheWrenchLab 4 года назад
Thank you! And thanks for checking out my channel! 👍
@baseballguy2001
@baseballguy2001 3 года назад
Nice job, Well done.
@TheWrenchLab
@TheWrenchLab 3 года назад
Thanks! And thank you for checking out the channel! 🤙
@jg_media9
@jg_media9 5 лет назад
Back at it bro!!! Been a little while
@TheWrenchLab
@TheWrenchLab 5 лет назад
This video was already posted. I changed a couple things to not confuse anyone that's an experienced mechanic. I have more coming soon though!
@jg_media9
@jg_media9 5 лет назад
@@TheWrenchLab keep it coming bro then man!! Hype to continue to learn from yaa my friend
@joserios7024
@joserios7024 4 года назад
Best video!
@TheWrenchLab
@TheWrenchLab 4 года назад
Thanks José! I always appreciate the positive feedback! 🙏
@Jus_Goody
@Jus_Goody 2 месяца назад
Better than the FCP euro video
@TheWrenchLab
@TheWrenchLab 2 месяца назад
😊🤭Thanks!!!
@paulanderson6023
@paulanderson6023 2 года назад
Class video made the job really easy thanks…..can I ask do you know how to get the brake pad replacement mileage reset?
@frostyarnie2941
@frostyarnie2941 3 года назад
Thank you very much. You’ve made it look so easy. New brake pads but the car may not stop because of the snow! 😂
@TheWrenchLab
@TheWrenchLab 3 года назад
It's really that easy! The right tools and patience is all you need... Well, this video too! 😁Thanks for checking out my channel!
@frostyarnie2941
@frostyarnie2941 3 года назад
👌👍thanks again!
@TheWrenchLab
@TheWrenchLab 3 года назад
Stay Frosty!
@andregunther4252
@andregunther4252 Год назад
Excellent job and perfect video angle. Just like anyone would expect. How come other people do not lube up anything at all? And, I am wondering if this is not too much lubricant, since the brakes heat up and may be the lub starts droping or creaping over the brake rotor or inside the brake pads. What is your opinion on that? I am not a professional.
@omarahmad-mz4lc
@omarahmad-mz4lc Год назад
hey thanks for the great video. How do you torque the caliper mounting bolts to spec if you cant fit a torque wrench in that area? one concern I am having before starting the job :)
@nkr3637
@nkr3637 Год назад
I seem to recall a previous (pretty old) brake replacement video you did. Or maybe just a brake pad recommendation. Am I correct? If so, what was your previous brake pad recommendation. I'm looking for some pads with solid stopping power but less (much less) dusty than my BMW OE pads. Thank you!
@Tinkerton82
@Tinkerton82 7 месяцев назад
I have a 2018 x3 w m-sport brakes. Is there a special tool needed (ie scanner) to release the rear parking brake in order to release the parking brake before replacing pads?
@terminator4974
@terminator4974 2 года назад
Can you please share a maintenance schedule for this car i have the non m 540i model from 2017 and want to diy it
@saeid602
@saeid602 4 года назад
Good job bro
@TheWrenchLab
@TheWrenchLab 4 года назад
Thank you! 😁
@saeid602
@saeid602 4 года назад
@@TheWrenchLab bro I have a question and I know you can help me. I want to replace brake rotor and brake pad for bmw 428i. Can I go with O'Reilly or Autozone parts?
@TheWrenchLab
@TheWrenchLab 4 года назад
You can, absolutely. I think O'Reilly has more of a selection than AutoZone has. AutoZone may only carry the Duralast brand. I would definitely check out RockAuto as well. Just few quick price checks, RockAuto beats the other two 👆. Rock has Brembo rotors (non sport package) priced at $65 each which is cheaper than the cheapest rotors O'Reilly has on their site! 😲 The big trade off with RockAuto is the price of shipping and delivery time. I think you would have to wait a day or two for your local auto parts store to get the parts in anyway. Hope this helps! 🤙
@santeagomendez8287
@santeagomendez8287 2 года назад
My retaining screw is really on there any recommendations?
@bigal5791
@bigal5791 4 года назад
Nice video my friend.. wonder if bmw mechanics pay as much attention to detail as you do 👍😃
@TheWrenchLab
@TheWrenchLab 4 года назад
I would hope so. I just hope they wouldn't use brake cleaner to clean the brake dust off the caliper 🤣🤣 Thanks for checking out my channel!
@djsarandos8138
@djsarandos8138 2 года назад
Should I buy the same brembo rotors or should I buy stoptech drilled rotors?
@MrFranciscoooooo
@MrFranciscoooooo 3 года назад
thanks man
@TheWrenchLab
@TheWrenchLab 3 года назад
Thanks for checking out the channel! What car you working on?
@MrFranciscoooooo
@MrFranciscoooooo 3 года назад
@@TheWrenchLab mine is 116d 1 series, but want to upgrade brakes
@TheWrenchLab
@TheWrenchLab 3 года назад
@@MrFranciscoooooo unless you're racing, you don't need fancy rotors. You can get a better than stock brake pad like I did and improve the braking performance. Doing the brake fluid flush along with it and you'll notice a big difference. I hated the brakes when I got the car and doing this whole brake job with the fluid flush changed my mind! 😁
@lucluk
@lucluk 3 года назад
I got 320i EU with standard brakes (rotors 300x22). I want upgrade for M brakes (front: 340x30 and rear 345x24). It its ok fot 18"? Should i swap serwo (serwo mens: stock nr: 34 33 6 851 097, M ver is: 34 33 6 851 098) and brakes pomp (i got stock: 34 33 6 851 093) ??Im wandering should i change those two elements ?
@timmoul1651
@timmoul1651 5 лет назад
Great video, thank you. I was confused when I couldn't find the video that included the talk of anti-seize, why have you removed this bit? I can't remember, did your original video also include measuring the runout with a DTI?
@TheWrenchLab
@TheWrenchLab 5 лет назад
@Tim Moul I didn't want anyone to misuse the anti-seize. i.e. use too much, over torque bolts, put it in the wrong places. I hope to eventually make a video talking about some of this stuff. I didn't do a run out in my video, I trusted the brembo rotors to be true.
@user-md9nw9vi4c
@user-md9nw9vi4c 2 года назад
5:08 How many millimeters is the punch tool?
@eugenechan00
@eugenechan00 4 года назад
great stuff! may i ask how tight to we need to torque the bolts if you know?
@TheWrenchLab
@TheWrenchLab 4 года назад
The fronts bolts are 110nm. The rear is 50nm +60°. Thanks for the kind words and thanks for checking out my channel!
@Mightyslinn
@Mightyslinn 3 года назад
Great video, making me feel confident enough to do my brakes myself, but correct me if I’m wrong but your roters actually didn’t look like they needed replacing?
@TheWrenchLab
@TheWrenchLab 3 года назад
I bought the car used and didn't know it they had ever been resurfaced, they probably didn't need to be replaced. I didn't like the way the brakes felt so I decided to swap the pads along with the rotors and start over fresh. After this and the brake fuild flush, they felt soooo much better. If you're not going to replace your rotors, you need to find a shop that will resurface them.
@user-fr1ji3qi7s
@user-fr1ji3qi7s 2 года назад
Thanks..^_^ This Video is useful for me...~ D,I,Y IS VERY DETAIL~~
@SAABaholics
@SAABaholics 3 года назад
do you think the 370x 30's for the front fit? I'm using ecs tuning to order and its telling me if fits only if i have 4 piston brakes. But im assuming the m235's only came with the 4 piston
@TheWrenchLab
@TheWrenchLab 3 года назад
M235's came with 4 piston front calipers but are the smaller M Sport size. The 370mm rotors will only fit the slightly larger M Performance calipers because they are set further away from the center of the hub. Believe me, I measured the distance between the the 340mm rotor and caliper on my car... Not a chance to fit anything larger than 350mm. 😔 I started to research if the larger M Performance calipers would fit the M235, but for almost the same price, you can get a 6 piston caliper big brake kit... so I stopped looking for the specs on the BMW 370's.
@ericlaflamme2504
@ericlaflamme2504 3 года назад
Seems like you did it but forgot to mention it : put anti seize on the wheel hub before putting the disc back on ! And also why not spray brake cleaner on the hub and parking brake pad ? I always did it and never had any problems. Other than that good DIY ! Do you like the Brembo rotors ? I'm tempted to buy them but the reviews online are not very good 🧐
@dropthepost7803
@dropthepost7803 3 года назад
Great video. Thx. Although my neighbour who is a mechanic with Mercedes-Benz exclusively for the AMG side, advised me not to use break squeak lube. He did suggest to lib the pins. Did my fronts spring of 2020 and have no issues or squeaking.
@arifsjc7670
@arifsjc7670 3 года назад
Great video! I was out at the bar and torque wrench, but thank you for lots of details. I can't imagine if any mechanic will be cleaning dust/rust of calipers or wheel mounts of our cars. Also, are there two sensors for driver+passenger sides? I got delivered Brembo brake pads but it contains only one sensor in the package. No pins or retainers that you showed in the video.
@wokkawicca
@wokkawicca 10 месяцев назад
2 years old, but: there is typically just one sensor up front and one in the rear. In the job I just did, the left front sensor tripped with 3mm pad remaining, but the RF pads (side without sensor) were all the way down to 1mm. So the wear can be uneven.
@TheWrenchLab
@TheWrenchLab 10 месяцев назад
😬 that's a close call!
@radiomaster200
@radiomaster200 5 лет назад
I've seen people paint that small space in the rotors because it tends to rust and the brakes dont actually contact with that part so it wont take it off. Would it be wise to paint them with caliber paint?
@TheWrenchLab
@TheWrenchLab 5 лет назад
This is actually one of the main reasons I chose to go with the stock brembo rotors. They have aluminum hats that are riveted to the brake disc. Aluminum doesn't rust, it goes through a different process called oxidation. No need to paint that unless you do it for aesthetic reasons. If you buy rotors with steel hats, sure, you could paint them. It's pretty rare these days to find steel rotors that don't come painted. They're usually painted black or sometimes silver. You don't need to get a specifically made caliper paint kit either. A can of rustoleum high temp paint from Lowe's could save you some money. Make sure you mask off the surface of the disc that comes in contact with the brake pads of course. If the rotors outlast the pads, you could repaint them then have them resurfaced at a brake shop. Personally, I've never painted a set of rotors. Ever. I like the look of the aluminum hat on these.
@rodrigopina8332
@rodrigopina8332 3 года назад
Why did you didn’t buy this 09c39813 disc brakes from brembo instead of the ones you bought? Best regards your videos are amazing !
@TheWrenchLab
@TheWrenchLab 3 года назад
Thanks Rodrigo! When I made this video I couldn't find the back discs in the same slotted /dimple for a good price. I could only find the OEM BMW version that were way too expensive. I'd much rather have a floating hat, slotted only, but those are impossible to find without going to a big brake kit.
@aaron81931
@aaron81931 3 года назад
Quick question on when you put the car on the stands. I assume you jack up the front first and put the 2 stands under the car then jack up the back and put those 2 stands? If this is the case is there any concern with the car sliding off the stands in the front when you jack up the rear?
@TheWrenchLab
@TheWrenchLab 3 года назад
Yes, that's the procedure when I put the car on 4 jackstands. I put the front on the lowest setting for the jackstands and lift the rear slowly. After the rear is on stands as well, I'll lift the front again and adjust the jackstands higher. I always go slow and make sure the wheels of the jack don't get stuck on little pebbles or anything that could cause the jack to slip.
@SalTarvitz
@SalTarvitz 2 года назад
Would you pump your brakes after each wheel is done or would you wait until the two front or two rear are both finished?
@TheWrenchLab
@TheWrenchLab 2 года назад
Just wait until your finished, because you'll have to do at the end either way.
@freemanmiracle7975
@freemanmiracle7975 3 года назад
Will that ceramic brake lube swell the piston rubber? I heard people said silicone should be used. Please advice, thanks.
@TheWrenchLab
@TheWrenchLab 3 года назад
I've heard that before but haven't ever had any issues with this stuff. Permatex says it may cause issues with a specific type of rubber but that type isn't generally used for brake parts. If you're worried about it, use the silicone stuff. amzn.to/3rivIdt
@CrayonEater94
@CrayonEater94 4 года назад
So what’s the different between the antiseize and lubricant? I don’t think I saw you use antiseize
@TheWrenchLab
@TheWrenchLab 4 года назад
The lube is to prevent parts from vibrating and causing that annoying squeal when you hit the brakes. Anti-seize is to prevent metal parts from rusting together with other metal parts. I removed the part of the video where I put anti-seize in a couple places, because if not used properly, it can cause problems and potentially be dangerous.
@lolNololshittalk
@lolNololshittalk 4 года назад
Before i am going to replace my rear M Sport Brake pads. Just want to confirm with you the Part number for rear M Sport brake pads my brake is exact Blue color as yours. Also seems like you are doing quite Easy to restore two of piston back to original state. Can you please confirm that i can Just wiggle the brake pads and push piston back by Hand without using tools? Many thanks in advance
@TheWrenchLab
@TheWrenchLab 4 года назад
I have the part number for the pads I used in the description. I love these pads for street use. I've had no squealing at all. There are a ton of different pads you can use though. And as long as your brkaes are in good working condition and you open the brake master cylinder the pistons should push in without much effort. Use the pads to push them in like I demonstrated in the video. If you have any questions, feel free to hit me up on Instagram with a DM. Just search for withmikey. Cool?
@tucker515
@tucker515 Год назад
Great Video. Delighted especially because I have the M-Sport brake option on my 2015 325X GT. I just came from the BMW dealer who said after only 35,000 easy miles, I needed to change all pads AND the rotors...$1800 for the fronts and $1400 for the rears. Never seen a need to change the disks on the several cars I've worked on. At such low mileage, will pad replacement only make sense? They also said that replacing the pads required removing the calipers which your video appears to show is not necessary with the M-Sport brakes. Seems they are trying to milk extra money from me. I have the skills and tools if I DIY. Your feedback would be most welcome.
@arifsjc7670
@arifsjc7670 8 месяцев назад
BMW 740 E38 brake job also requires pad and rotor change as done by local BMW specialist mechanic shop. I have done both front and rear. Front I tried Brembo but brake pedal now goes bit lower than what was with original OEM BMW pad/rotors.
@powpow4033
@powpow4033 2 года назад
hey. where did you get the new pins?
@TheWrenchLab
@TheWrenchLab 2 года назад
Rock Auto
@dgkking123
@dgkking123 2 года назад
anybody know what Brakes BMW uses when they change them? My rears need to be replaced but I want to match the brake pads
@TheWrenchLab
@TheWrenchLab 2 года назад
34216887576 Is the part number for the rear pads. You can look all that stuff up on RealOEM.com
@alexmontes1155
@alexmontes1155 3 года назад
Did he just say go and just take that tool😂
@kevinyung1743
@kevinyung1743 4 года назад
What if the seals of the brake piston is rippped, I was changing mines and I see that one of them is ripped
@TheWrenchLab
@TheWrenchLab 4 года назад
The rubber seals are for protection of the piston inside. You should definitely replace it as soon as possible. I don't hace a video on this yet but... Check out Bryans video in the link below. He shows how to remove and replace the seals in a series of videos he did when he powder coated his calipers. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Vehyz-dWzFs.html
@kevinyung1743
@kevinyung1743 4 года назад
With Mikey! You are amazing, thanks a bunch
@TheWrenchLab
@TheWrenchLab 4 года назад
@@kevinyung1743 Just trying to help out as best I can! 👍
@Jonny789321
@Jonny789321 4 года назад
Can you put the link for the brembo rotors
@TheWrenchLab
@TheWrenchLab 4 года назад
If these aren't in stock, the Pagid 2-piece rotors, with aluminium hats are just as good. RockAuto www.rockauto.com/en/parts/brembo,09C39713,rotor,1896 RockAuto www.rockauto.com/en/parts/brembo,09C39613,rotor,1896
@Guffen123
@Guffen123 4 года назад
Superb video. I now have my first BMW with M sport brakes, so this is very helpful. One little detail, though. I have previously had problems getting the rear rotors off without releasing the parking brake spring. Is this something you have experienced?
@TheWrenchLab
@TheWrenchLab 4 года назад
I have in fact had to loosen the parking brake a few notches to get the rear rotors off this car. Just make sure you remember 😊 how many notches you loosened it so it's easier to set back to it's original position. 🥳Congrats on the new car! Thanks for checking out my channel and for the kind words! 👍
@ImRizm
@ImRizm 3 года назад
I attempted mine but the 2 guide pins were completely seized in there. I even used wd40. Not sure how I can get them out now 😫
@TheWrenchLab
@TheWrenchLab 3 года назад
Dang. I missed your message. Were you able to get them out?
@jeffglobis1855
@jeffglobis1855 3 года назад
So we doin palomar mountain road again now or what?
@TheWrenchLab
@TheWrenchLab 3 года назад
HOOOBIS! Let's GOOOOO! 😁😁😁😁 Mountain runs til rotors glow!!!🔥🔥 🏎️🏎️🏎️
@syhm1212
@syhm1212 4 года назад
How many brake sensors should I buy? Btw, video was very helpful
@TheWrenchLab
@TheWrenchLab 4 года назад
You only need 2 brake wear sensors. There are only those 2 connections.😊👍 I appreciate the kind words! Thanks for checking out my channel! Feel free to hit me up in a DM on Instagram, @thewrenchlab if you have any questions!
@syhm1212
@syhm1212 4 года назад
Ahh so one on the front and one on the back? Are the both sensors in driver side?
@TheWrenchLab
@TheWrenchLab 4 года назад
@@syhm1212 they're at opposite corners. Rear passenger side and front driver side. You'll see them clipped onto the inside brake pad, closer to the center of the car.
@deeagnol
@deeagnol 3 года назад
My 435d has the upgraded M Sport brakes and BMW have said they need to be changed in the near future, I checked how much they cost and almost fell off my chair 🤣 what discs and pads are equivalent to the BMW M Sport brakes that came from the factory that I can purchase and have my local mechanic fit instead of being robbed by BMW dealer?
@TheWrenchLab
@TheWrenchLab 3 года назад
Check out my video on how to find OEM parts 😉👍
@terminator4974
@terminator4974 2 года назад
Oath!
@radiomaster200
@radiomaster200 3 года назад
Do I have to change the brake sensor? I heard that as long as you change them before they alert you, you can keep the same ones?
@TheWrenchLab
@TheWrenchLab 3 года назад
Yes, you can keep the same brake sensors as long as they're still in one piece. As the break pads get thinner, the sensor gets closer to the rotor. When it eventually comes in contact with the rotor, the metal contacts complete a circuit, causing the alert.
@radiomaster200
@radiomaster200 3 года назад
@@TheWrenchLab one more question😅 what exactly is the alert to change the sensor? Is it the warning that I have like 470 miles left or when it gets worse?
@TheWrenchLab
@TheWrenchLab 3 года назад
There's no warning to replace the sensor. If you got that warning then the sensor just have come in contact with the brake disc, meaning you have to replace the sensor when you replace pads. If you don't replace the sensor, the car will still think the pads are worn down and the warning wont go away. They're not very expensive or difficult to replace when you're replacing pads and rotors.
@radiomaster200
@radiomaster200 3 года назад
@@TheWrenchLab thank you, for your response!
@danthemtlman
@danthemtlman 4 года назад
Doing these now on my neighbors car. Already did the front but gotta question on the back. Do you need to replace the rear brake bracket bolts. I read that they are stretch bolts but hard to find real info on it. In this site torque specs it says to replace. Any info would helpm www.newtis.info/tisv2/a/en/f87-m2-cou/repair-manuals/34-brakes/34-21-rear-wheel-brakes/1VnY0aNMAR
@TheWrenchLab
@TheWrenchLab 4 года назад
Sorry for the late response Dany! Your comment was in the spam folder for some reason. It is recommend to replace these bolts as they are a one time use because of the exact reason you mentioned. As a general rule with these BMW's, always replace the hardware because the vast majority are these stretch bolts. It can get expensive, but it's well worth it in the long run!
@hass1005
@hass1005 2 года назад
How do you find the brembo rotors compared to oem, are they performing well ?
@TheWrenchLab
@TheWrenchLab 2 года назад
These particular Brembo rotors are the exact same thing that BMW uses as thebOEM part, minus the little QR CODE and label saying BMW and the price. 😉 They work well for normal use or even some spirited driving on your local, country, back roads. No issues, they're great.
@hass1005
@hass1005 2 года назад
@@TheWrenchLab great man, thanks for the feedback !!
@TheWrenchLab
@TheWrenchLab 2 года назад
@@hass1005 thanks for checking out the video! 😁
@pwnz0orz
@pwnz0orz 3 года назад
Hey! I saw you had a bottle of anti-seize but didn't see where you used it in the video. Did you put any on the "inside" of the wheel hub or did you just use it on the nuts and bolts?
@TheWrenchLab
@TheWrenchLab 3 года назад
I put a very very thin coat on the surface of the hub that comes in contact with the rotor. I took that part out of the video because I didn't want anyone to over do it which can potentially cause dangerous conditions. I forgot to remove the anti-seize part of the video. If you're experienced/comfortable using anti-seize go for it. If not, don't worry about it. If the rotor rusts and gets stuck to the hub, there are ways to get it off without much effort, no biggie. I talk about it in my lug stud conversion video. 👍
@TheWrenchLab
@TheWrenchLab 3 года назад
Too much anti-seize can fling off the hub and can get on the brake disc surface reducing braking force... Like pouring oil on your floor and trying to run on it. There are a few things I use anti-seize on but I do that from experience and trial and error! 😂 There are also times I use a drop of loctite but again, don't want people to go overboard.
@pwnz0orz
@pwnz0orz 3 года назад
@@TheWrenchLab thanks for your quick response! How are you liking the setup? I wanted to get Zimmerman rotors, but the Brembo's just went on a 25% sale at my local shop! I would probably get the Power Stop Z23 which are very similar to the Z26, the shim is the only difference from what I can gather online.
@TheWrenchLab
@TheWrenchLab 3 года назад
I try to respond as quickly as I'm able! 😁 The Brembos were a few bucks more and I trusted them more than the rest. I did a fluid flush after the new pada ans rotors and it was a night and day difference with the way the brakes felt! The Z23 are regular daily driver pads with very low dust. The Z26 pads are more geares towards high performance vehicles.
@pwnz0orz
@pwnz0orz 3 года назад
I got a 2016 M235i a month ago, I'm really happy I found your video, it's given me the confidence to tackle the brake job myself! I'll end up saving a few hundred bucks and get the satisfaction of doing it myself. I'll let you know how it all goes!
@bernardbernard7249
@bernardbernard7249 3 года назад
I have thé same. Excellent brake but impossible to change thé protection behind. I font know thé name of the pièce .
@TheWrenchLab
@TheWrenchLab 3 года назад
You have Instagram? Send me a pic so I can help you out. 🤙
@bernardbernard7249
@bernardbernard7249 3 года назад
@@TheWrenchLab sorry nous Instagram I speak English notre vert well too.. French.. I need tou to send me the exact name ou code of the colour for these M sport brake cliper blue. Impossible to find on the net.
@jackhere4594
@jackhere4594 Год назад
i think for m performance up front u should have M Performance 370mm rotors not 340, or maybe theres a difference in m sport vs m performance
@josephmgomez3921
@josephmgomez3921 7 месяцев назад
those are powerstop
@TheWrenchLab
@TheWrenchLab 7 месяцев назад
What are?
@MoeReefs
@MoeReefs 3 года назад
After watching the beginning and seeing all the crap i need, I decided to take it to a mechanic.
@i0001w
@i0001w 2 года назад
Why you replace the rotors? Waste of money
@ammarfarza
@ammarfarza 4 месяца назад
He most likely did this because when he changed his break pads, his new ones won't wear out as quicker. If his NEW break pads are mixed in with his OLD rotor, then the NEW break pads will wear out much quicker, mainly because the OLD rotor's metal is old and rusty which'll cause damage to the NEW pad's metal. If both the rotor and the pads are FRESH they will have a longer life expectancy together.
Далее
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,4 млн
Installing Massive 135 Brembo Brakes on my BMW e46!!!
24:55
BYD Automobile Dynasty BYD Han Tang is impressive
0:16