No video :(

Briggs and Stratton Carburetor Diaphragm Replacement- Lawn Mower Engine Diaphragm

Подписаться 155 тыс.

Просмотров 73 тыс.

50% 1

* VISUALLY EXPLAINED
For a FREE Printable Download help Leaflet: www.therepairs... .
This link will take you through to my website where you can download this guide absolutely Free.
For more useful information please take a look at my website: www.therepairs...
If you need any of the items featured in video then please find them below:
* Briggs and Stratton 698369 Yellow Foam Air Filter. Classic, Sprint & Quattro Engine - amzn.to/3nfdHeF
* Carburetor Spray I used in the video (P/N: 1831014 54179) amzn.to/2QIbA76
* Briggs & Stratton 690347 Genuine Air Vane Link - amzn.to/3n7M9rM
* Briggs & Stratton 692189 Grommet - amzn.to/3gwnUSR
* Briggs and Stratton Genuine 795477 Carburetor - amzn.to/3xlOrZ0
* Briggs & Stratton Carburettor Diaphragm/Gasket Kit 795083 - amzn.to/3dxI38U
* Briggs and Stratton Genuine 19461 Primer Removal Tool - amzn.to/3atHGdQ
* Briggs & Stratton 19462 Primer Install Tool - amzn.to/3x4pJfo
* Briggs and Stratton Carburettor Primer Bulb. 694394 - amzn.to/3dEDav7
* Briggs and Stratton Genuine 693446 Intake Manifold - amzn.to/3tzApR2
* Governor Springs 691859 692211 for Sprint Classic Engines Lawn Mower - amzn.to/3sBVRn4
* Briggs and Stratton 698369 Yellow Foam Air Filter. Classic, Sprint & Quattro Engine - amzn.to/32vRI9J
I really hope these links are useful to you. If you don't want to use the link, you can still use the part numbers to conduct your own free search.
#lawnmower #gardening #repairing #savingmoney #lawnmowerrepair #smallenginemachines #DIY
Many thanks indeed
Craig Kirkman (Owner and creator of The Repair Specialist Channel)
Please check out my amazon shop. I have recommended some useful items from Amazon below. I guarantee you that these items are the sorts of things I use on a daily basis so I know they are good. I have to be careful in recommending products because I have my name and credibility at stake. So I will only recommend good products. www.amazon.co....
#DIYRepair
#MaintenanceGuide
#EngineParts
#RepairSpecialist
#BriggsAndStratton
#CarburetorRepair
#EngineMaintenance
#FreePrintableGuide
#UsefulInformation
#HomeRepair
#LeafletDownload
#EngineComponents
#HandyTools
#CarburetorParts
#EngineFix
#EngineTips
#LawnmowerMaintenance
#DIYHelp
#EngineAccessories
#DoItYourselfRepair

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 126

@stuartaharris 3 года назад

If only all DIY/instructional videos were so clear!

@TheRepairSpecialist 3 года назад

I really apreciate your nice feedback. Thanks. Craig

@johnmoore2639 4 месяца назад

Thanks to you sir I repaired/serviced my old hand-me-down mower. It has never sounded more powerful. Symptoms were low revving and not maintaining rpm to almost cutting out. I removed, stripped and cleaned the fuel tank and carburettor and reassembled. Now it runs like an animal!

@TheRepairSpecialist 4 месяца назад

Fantastic. Thanks for letting me know. Happy cutting. Craig 👍👍

@JamesChen-sm7vo 2 месяца назад

Clear, concise and very well organized logical presentation . Bravo , you are N0. 1 !

@TheRepairSpecialist 2 месяца назад

Wow, thank you! 👍

@GTFtv3624 3 года назад

Only recently discovered your channel and would just like to say how excellent and informative your videos are. You have a great presenting style and the camera work is superb. Thanks also for adding the part numbers! 👍🏻

@TheRepairSpecialist 3 года назад

thank you so much, i'm glad this helped you and thank you so much for subscribing - Craig

@josephborras7821 2 года назад

One of the most and best step by step videos I’ve seen

@newtkar4067 2 месяца назад

I been working on small engnes just about all my life. That said, if this fellow and you tube had been around years ago, I would have learned much more at a much faster rate. This man is awesome, If a person can't learn from watching and listening to this channel im afraid there isn't much hope for you! He demonstrates his excellence and his desire to teach other's. I thank him for that!

@TheRepairSpecialist 2 месяца назад

Thank you so much for your kind feedback. I really appreciate it. Craig 👍👍👍

@martinperth4262 2 года назад

I just replaced the diaphram and bulb with the help your video. Your attention to detail made the exercise effortless. Thanks!

@bobdrake7118 2 года назад

The best video on this type of Briggs & Stratton engine. Especially the detail about the flatness of the carburetor to fuel tank mating surface. This caused me to assemble and then reassemble the whole thing multiple times. Also, checking the intake tube to the engine is something that also needs to be checked. It's easy when you know how. Thanks for your attention to detail.

@bejacaa8966 2 года назад

Thanks so much for the wonderfully clear and precise tutorial.

@themowerman 3 года назад

Good one mate.. clear and simple..

@frederickstevens6415 2 года назад

THE VERY BEST VIDEO thank you for making this job a lot easier and well-presented it would have made me give up without the parts number you provided

@davidsprocket5141 3 года назад

Just found your channel to-day. WOW Such a great resource of repair info and part numbers. Thank You From Goderich Ontario Canada, home of the world's largest salt mine.

@robertforster9736 3 года назад

Very easy to follow. Great teacher. Thankyou for all your thorough videos. Has helped me alot with my small engine repair business in Manitoba Canada

@TheRepairSpecialist 3 года назад

I'm pleased it helped. Thank you so much for your feed back :) - Craig

@frederickstevens6415 4 месяца назад

at last someone who can describe and instruct clearly i find it hard to follow some of the video on RU-vid but yours is first class thank you

@jimhudson2108 Год назад

Great video! My Makita mower was running sick, very rich. I changed the diaphragm and gasket and now it's like new. Thank you.

@jreeder6168 Год назад

This is a very good, professionally done presentation without a lot of goofy stuff common in these DIY videos. Well done Craig.

@TheRepairSpecialist Год назад

Thank you very much! I really appreciate your kind feedback l. Craig👍

@rswoodys1 2 года назад

Thanks for the video told be all I need to know to put my lawn mower back together!!

@MH-ie1sg 3 года назад

No nonsense video. Straight to the point and very well explaind. Thanks.... helpt me repairing my lawnmower myself!

@ricochet5344 7 месяцев назад

Very thorough video. Thank you very much 🙂

@emersoncampbell2661 Год назад

I am now more confident to work on my lawnmower,thanks.

@michaelgibson4705 2 года назад

This in my opinion is far and away the best tutorial on B&S carburettor service on RU-vid.Gives you the confidence to attempt this job.well done Mr Kirkman

@davidpayne2096 Год назад

Excellent video. I was going to have my son help me, as he had gaskets and diaphrams. I watched your video and did her all myself. Old push mower now runs like new. Thank you for posting this!

@scottcrawford4655 3 месяца назад

Thank you thank you! The step by step was a huge help. Mine was sputtering so bad prior to the fix now it runs perfectly. Also thanks for the links to the gasket, saved me a bunch of headaches trying to find the correct one. Definitely holding onto this video incase I need to fix again.

@TheRepairSpecialist 3 месяца назад

You're welcome! And thank you for your kind feedback. Craig

@stevencolangelo7773 Год назад

Excellent video. Exactly the problem I was dealing with and video provided the solution I needed with excellent commentary. My 15 year old mower now runs like new. I highly recommend this video!

@Morgenstund Год назад

I have to wait a couple of days for the diaphragm to arrive... I can't wait to get my fingers dirty. Thanks for the video, sir!

@GeorgeGreenfield1951 11 месяцев назад

I had lots of running problems with my Briggs and Stratton engined mower, never finding the problem. Finally, with no more hair left, I changed the carburettor diaphragm and voilà, the issue was solved. Thanks for your help.

@TheRepairSpecialist 11 месяцев назад

Thanks for sharing. Craig

@DVDFBlackDog 2 года назад

Very helpful video which allowed me to repair my mower and great added information

@puddle4125 Год назад

thank you so much for this! as a 40 year old woman who isn't scared of a spanner, I have managed to bring our previously trusty old lawn mower back to life. shockingly we never knew to service it! it's was barely starting then surging. so a general clean, new spark plug, air filter, carb gasket and springs and finding a broken manifold pipe too! it's back up and running better than ever before! now to teach the DIY phobic husband to care for his toys! thanks again for taking the time to share your knowledge

@TheRepairSpecialist Год назад

That's awesome. I'm really pleased you got that sorted and good look with the teaching 😂. Thanks again. Craig 👍

@geoffwilletts4683 7 месяцев назад

Hi good morning. I would like to compliment you on an excellent video. Best i have seen todate. So easy to follow its given me confidence to have a go at one of my mowers which is hunting when i start it and stops occasionally. When it settles down it does run ok. I have this issue every time i use it. I assume a good carb overhaul is required. Thanks again and well done.

@TheRepairSpecialist 7 месяцев назад

Awesome, and thank you for your kind words. Craig

@thebuyerboy 2 месяца назад

Hey thanks so much for this brilliant video. I managed to follow it clearly and now have my mower back in good working order.

@TheRepairSpecialist 2 месяца назад

Thank you so much 👍👍👍

@edwardbella3871 10 месяцев назад

The best tutorial i have come across.

@TheRepairSpecialist 10 месяцев назад

thank you so much

@MrRodgerMoore 2 года назад

Such a great quality video. Thanks

@jamesbest2983 3 года назад

Excellent videos and very well described, there should be no doubt in anybodies mind what and how you explained the operations - keep up the good work - jim from downtown Alberta

@jozegrum262 28 дней назад

Jasna dobra predstavitev,žal ni tona za povedano!

@TheRepairSpecialist 27 дней назад

Thank you and sorry about the No Sound Issue! Craig

@johndn9238 3 месяца назад

Brilliant video, very well paced and good clear explanation. Many thanks indeed.

@TheRepairSpecialist 3 месяца назад

You're very welcome! Thank you

@superfreakMee 4 месяца назад

this is what i call detailed srvice , nice man :)

@weschaffin Год назад

The English are more thorough than a Yank doing this same project. Well done brother across the pond. Great video from a Yank from the South.

@colletteworley 7 месяцев назад

Absolutely brilliant thank you,

@claudedecet485 Год назад

Bravo monsieur, vos vidéos sont très explicatives, c'est un plaisir de vous regarder 👍

@StjepanSermek 10 месяцев назад

Bravo.

@matthewmiller6068 Год назад

Thank you! I ended up with a tiller that was abandoned with the house we bought but its positively nasty and oily sludgy around the fuel tank. Hoping to find some parts local vs slow Amazon, but this looks like it has the information I need!

@FD-dh2fu 3 года назад

Great Info as Always!!! Thank you

@TheRepairSpecialist 3 года назад

Thank you. Your feedback is great as well. I really apreciate it. Craig

@sorrydarren 4 месяца назад

Absolutely first class. Thank you so much.

@ChrisPBacon-vf2dz 10 месяцев назад

Great video and with an East Midlands accent that I can understand as I grew up in Nottingham. Part numbers was a real bonus and my only question is "What is carburettor spray " ? Available easily ? Liked and subbed and can't wait to get started ! Duh !! Saw carb spray in your descriptions !!

@TheRepairSpecialist 10 месяцев назад

Awesome, thank you. Craig

@juancarlosestebanbakker281 Год назад

Very good ,from Argentina,thanks.

@davemarks7322 Год назад

Outstandingly clear, concise and complete. For sure a strong like and a subscribe.

@TheRepairSpecialist Год назад

Thank you for that great feedback. I really do appreciate it. Craig 👍

@johnnixon7750 Год назад

Hi and thanks for the Download. I am in New Zealand and was about to do this on a second hand mower that I just brought. I will go down and get a Diaphragm kit in the morning. I have also subscribed to your chanel. Cheers, John.

@TheRepairSpecialist Год назад

That's awesome John, Thank you for your nice feedback, and I hope the job goes well. 👍

@johnnixon7750 Год назад

@@TheRepairSpecialist Well I completed the job and mower runs sweetly. Thanks again.

@dougsorensen7594 Год назад

Best video ever on this type of carb - bravo!

@TheRepairSpecialist Год назад

Thank you for your awesome comment. I really appreciate it. Craig👍

@mladen.gajdic Месяц назад

Great video. Tnx.

@gordbaker896 4 месяца назад

Thanks. It still seems wrong to put the Diaphragm against the tank, but I did. The original was against the carb.

@XTCraverXTC 2 года назад

Very in depth. Thanks for the great video!

@battmann678 3 года назад

Well done, Sub'd and thumb's up. All the best from the U.S.

@bl9531 Год назад

What an excellent video. Thx so much - exactly what I needed

@MGB-learning 10 месяцев назад

Great video

@TheRepairSpecialist 10 месяцев назад

Thank you so much

@ldaly4621 Год назад

Excellent. Thank you

@CerberaLM 2 года назад

On my engine the governor setup was was a little different different and took off the bracket off the front of the engine (used by the 3/8" bolt) to give more room to maneuver the carb off the shaft. I didn't tighten the carb enough and it was leaking when priming. After more tightening I primed the carb, still leaked, more tightening did the job and then I installed the carb back on the engine.

@mc2whls 2 года назад

Great video, Craig.

@peteturner8493 3 месяца назад

Many thanks was having trouble locating these parts.... I appear to have broken a small sponge like gasket / washer around the shaft of the carb throttle goes on the outside of the carb near where the cables attach to govern opening and closing or speed control - this would prevent ingress of dirt down the shaft but nowhere to be seen as a spare and looks tricky to replace help!

@spikeyross Год назад

Thanks very much @therepairspecialist. I've just sorted my lawnmower thanks to this video.

@woozyinyahead27 3 года назад

Heck yea! Always glorious

@TheRepairSpecialist 3 года назад

Thank you for your nice feedback. I really apreciate it. Craig

@mostlymoparih5682 Год назад

Good video, diaphragm goes on first that's what I needed. Good stuff. Happy Motoring oops maybe mowing.

@joergbauer5597 2 года назад

Thank you you make my day!

@orchestralforest8310 Год назад

Brilliant - exactly what I needed.

@TheRepairSpecialist Год назад

Awesome. Thank you for your feedback. Craig 👍

@user-iq8ei2tr8p 11 месяцев назад

Great video Craig, like & subscribed.

@TheRepairSpecialist 11 месяцев назад

Awesome. Thank you very much. Craig

@kiettrinh8704 Год назад

Well Said , thanks

@rsinfelt1 2 года назад

Excellent Video .....thank you so much!

@TheRepairSpecialist 2 года назад

Thank you for your nice feedback I really appreciate it. Craig 👍

@vilmostoth3096 Год назад

Very technivally illustrated instead of face shots talking...good camera shots

@TheRepairSpecialist Год назад

Thank you very much! 👍

@johnocallaghan9252 4 месяца назад

Brilliant

@gcruz8830 Год назад

Thank you for sharing your knowledge. My lawn Mower, bolens 450 series 148cc the primer bulb goes comply in after using lawn mower, lawn mower turns off. Can you please help me fix this problem? thank you.

@AlanJan_UK_49 Месяц назад

I replaced my diaphragm and gasket last October and found this video invaluable. Last week I noticed fuel was leaking onto the top of the tank so I've just had it to pieces. I did everything as per your video again but am still getting fuel coming up one of the screw shafts. At 14.59 it looks like your screws have a sealing washer on them ?? Not sure if mine do. If this can't be sorted is there some kind of gasket sealant that can be used. Hope you can help as I'm a bit stuck.

@TheRepairSpecialist Месяц назад

Hi. Thank you for your kind feedback, I really appreciate it. The screws aren’t actually in need of a sealing washer. The screws in my vid are just spring washers. If you are getting fuel out of the screw hole then just make sure that the diaphragm is not damaged in that area, the screw is nice and tight, and if that isn’t fixing the issue then consider that the top of the tank can sometimes distort ( the silver machined part where the carb sits on top). If this is the case then you can either buy a new tank ( or a good used one from eBay for much less the price). You can test to see if there is warping on this area by using a straight edge ruler as shown in the vid. This issue with warped tanks is not so common though so make sure you check the other things first. Because the carb is made of plastic they can sometimes have airline splits in them that can cause this type of issue. As mentioned about the gasket, and diaphragm for that matter, give these a thorough check for tiny cracks and splits. Start here and if this doesn’t sort the problem we can go further. Thanks again. Craig 👍👍👍

@AlanJan_UK_49 Месяц назад

@@TheRepairSpecialist Thank you Craig. So kind of you to reply & so quickly too ! I thought I'd lost all 5 washers when I first took it to bits last year. Maybe not it seems. The gasket & diaphragm were new last year and new ones again today. I'll have to do the straight edge test at the next opportunity. Pity, as I thought I was doing so well & am now worried that I've used more force than I should have & cracked the plastic.

@Syncop8rNZ Год назад

Great video, exactly what I needed! So when I order parts, all I need is the diaphragm, gasket and possibly the O-ring (unless anything else is missing/broken)?

@TheRepairSpecialist Год назад

First of all thank you for your kind feedback. And yes, usually you just need the diaphragm and gasket 👍

@mikeholt7087 9 месяцев назад

Down side of not taking the filter off is that you can’t see the state of the jet. 😊

@TheRepairSpecialist 8 месяцев назад

Very true

@shannonbrooks8834 Год назад

It's not the space shuttle. But,a way informative video .Also,if your mower don't prime ? Scratch a shallow line on the tank where the gasget meets the tank. All the way around surface of the tank. It will help with a gap,and help with the seal. I saw this on RU-vid,it works.

@martyhorten3743 3 года назад

1) I recommend hitting with air first, carb spray second, then with air again. The stronger the air the more debris you can easily blow off. 2) I had a problem where the gasket curled away from a screw hole, happened too easy & had to undo and fix. 15:55 Your dead bug is still in the fins 😝

@NIGELSIDDALL 4 месяца назад

How important is the rubber grommet condition? Mine has cracks in it.

@matthewharmer1656 3 года назад

Hi, I have removed the primer bulb ,just like in your video,but a small ball bearing,a small spring and a plastic spacer fell out, where do they go???

@mariodouehi1284 8 месяцев назад

id like to know what is the difference in between the 5hp 190cc an the 6hp 190cc 4stroke Briggs an Stratton engines how do they work out the difference is bore an stroke the same

@V1mal129 Год назад

Is it normal for gasket to protrude a little at one end? as in this Video, I have the same on a new gasket , the Diaphram does not stick out

@taxidriver7654 Год назад

Can it work if mounted without the little spring?

@jonnystewart8090 13 дней назад

I’ve done a few of these & can’t get them to work 🙈

@bub1683 3 года назад

i got almoust the same. Mine is just a little older, no priming button. Question. Is it the same diafram?

@jeffreygleaves2931 25 дней назад

I've put three new carbs and tanks on mine and on all of them about the 3rd time I use it the carb. doesn't want to prime. I get frustrated because I don't know specifically what to fix so I just buy a new assembly. What is going on with these that I have to fight this battle every year after only a couple of uses? Does the diaphragm go bad that quickly? Is there something I need to make sure is clean after every use?

@TheRepairSpecialist 25 дней назад

Hi It sounds like you're having some frustrating issues with your Briggs and Stratton 500 series engine. If your carburetor and fuel tank assembly keep failing after just a few uses, there are a few common culprits to consider: 1. **Fuel Quality**: Ethanol in gasoline can attract moisture and cause corrosion. Try using ethanol-free fuel or add a fuel stabilizer to prevent this. 2. **Fuel Contamination**: Dirt, debris, or water in the fuel can clog the carburetor. Ensure you're using clean fuel and consider adding a fuel filter. 3. **Storage Practices**: Storing the mower with fuel in it can lead to degradation and deposits. At the end of the season, either drain the fuel system or run the engine until it stops. 4. **Carburetor Issues**: Small passages in the carburetor can get clogged easily. Regular cleaning and using high-quality fuel can help. 5. **Primer Bulb Problems**: Check the primer bulb for any cracks or wear and ensure it’s functioning correctly. 6. **Fuel Tank Ventilation**: A clogged fuel cap vent can create a vacuum and prevent fuel flow. Clean or replace the cap if needed. By addressing these areas, you can hopefully reduce the need for frequent replacements. Good luck, and happy mowing! Craig

@lahorepakistan100 Год назад

Can I use water or throttle body cleaner for cleaning the carburetor? Is it safe to use? Thank you!

@TheRepairSpecialist Год назад

I usually use either of those. As long as you make sure that you dry out the inside of the tank afterwoods then all should be just fine

@ldaly4621 Год назад

Where can I find links for the various parts ?

@TheRepairSpecialist Год назад

I would look on Amazon first of all. EBay is another good place to look.

@TheUltimate65 2 года назад

Smal parts of dirty can make trouble..

@Portergetmybag 3 года назад

If you held a gun to my head and demanded constructive criticism about this video, my mind would be dangerously blank. The last moment before the trigger pulls, “OK! I have one, don’t kill me! The model numbers in the lower left corner are impossible to see when the video is paused to write it all down in portrait or landscape on my phone requiring reversing a bunch of times!!!” (hesitatingly yelled in one exasperated breath).

@TheRepairSpecialist 3 года назад

Ahh. Ok. Thank you for letting me know that. I do appreciate it. I will have a think about what to do for the best there. Thanks for your feedback. Craig