Just use the trimm Funktion. Disarm first than full throttel and right stick for trimming out. Lets say your drone fly backwards than you use pich forward and so on. 1 sec of stick deflection is about 1 point of trimming. Happy flying everybody. PS i thing JB has a video for calibration!!!
You gotta be careful with lactate, it is plastics. When you say "Loctite all screws", someone might accidentally Loctite the canopy screws. The best practice is to check for loose screws periodically especially after big crashes.
Hi, God damn, I love your post! It was awosome. New Mobula6 looked damn good! By the way, your recorded video was pretty good without much noise or break up with analogue. Can you tell me what goggles and reciever are you using? I am using skyzone o4o pro and stock reciver for my mini whoops but there is much noise and break-up. Thank you bro!
Never locktight a motor screw, Just buy spare screws. I lose mine alot, you can buy like 1000 pieces of them for about $5, When you land nice and flat you can hear the metal screws click, there taking alot of the impact. M1.4 x 4mm works, you can spend more money for titanium to save on weight. Make sure they aren't countersunk tho. Countersunk screws would start the 4mm measurement from the top of the head. I made that mistake recently.
I use a post level to set my drone on for calibration. Generally they’re taller than 6 inches which allows for the cord to point down. I also get a physical indication, in the level, that the craft is actually on a flat surface.
I know it seems counterintuitive, but if you turn down your VTX power indoors, you can actually improve your signal because reflected signals can cause interference, especially a higher power levels.
my mobula sux even tho it flys better than meteor65 the camera has a weird white balance make it hard to see from shade to sun the wobbles makes everything looks like u fly on mushrooms and on top of that a have static from motor noize to make it even harder to see, also sometimes after light bumb on the wall i get failsafe error and it disarms it self, to me seems like happymodel is not doing the best work on quality control