Broken Remote Buttons? How to Fix

Подписаться 764

Просмотров 1,3 тыс.

50% 1

Remote control buttons can be fixed sometimes by cleaning with alcohol, coating the pad and pcb with pencil markings, or sometimes by replacing a worn out conductive pad as shown here.
Spudger tool to help pry open the remote:
Amazon.ca: amzn.to/43MEF2C
Amazon US and others: amzn.to/43HUUOv
Button pad repair kit:
Amazon.ca: amzn.to/3VRAIYi
Amazon US and others: amzn.to/4aAK6ni
If you'd like to support the channel, you can:
Support me on Patreon: / gadgetreboot
Shop through my affiliate links (I may earn a small commission, costs you nothing)!
Banggood www.banggood.com/custlink/3vK...
Aliexpress s.click.aliexpress.com/e/_AFeHwB
Amazon.com www.amazon.com/?&_encoding=UT...
Amazon.ca www.amazon.ca/?&_encoding=UTF...

Наука

Опубликовано:

2 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 6

@BusyElectrons 2 месяца назад

I've had good luck with the ButtonWorx repair kits (on Amazon). They're self-adhesive and they stick to the PCB instead of the button. They have a thin spacer built in that keeps the conductive pad just above the surface of the PCB. Remotes I repaired around 2 years ago are still working fine under daily use.

@pileofstuff 3 месяца назад

Great simple repair. I gotta get me a box of those replacement pads - there's a couple of remotes around here that haven't responded to just cleaning them.

@gadgetsideload 3 месяца назад

Definitely start by looking at the IRLED in the camera to confirm the buttons are not responding because I still have one remote for a receiver from the 90s where the power button stopped responding in the past week, but the LED is actually transmitting. I tried gluing a new pad on just to see and it did not change anything so I’m not even sure what’s going on with that one, the power button on the receiver works but just not from the remote for some reason.

@bobnine 3 месяца назад

Best to check the battery and check your camera can film infra red leds first 😂

@TheEmbeddedHobbyist 3 месяца назад

Just a thought, superglue might be a bit brittle for this kind of use. I might try some form of rubber contact glue it's a bit more flexible Superglue is no good in shear type force, so any flexing could lead to the joint parting ways.

@gadgetsideload 3 месяца назад

I was considering contact cement but the small tube I had was all dried up, I probably bought it 15 years ago and used it once for whatever I bought it for at the time so I’ll consider this an ongoing experiment for type of glue. It will at least only get gentle use around here.