Brother PRS 100 Persona: Test Your Bobbin Tension and Make Adjustments

Подписаться 51 тыс.

Просмотров 4 тыс.

50% 1

Join me for this episode of Embroidery Sundays and I'll tell you what those little metal weights are used for! I'm reviewing page 91 in the Brother PRS 100 Persona Embroidery Machine Instruction Manual - How to check the bobbin tension and make adjustments. When I unboxed my machine, I notices two little metal weights ...A large one and and a small one. I couldn't figure out what they were used for until I found the answer on page 91!
For more information about the Brother PRS 100 Persona Embroidery Machine www.sewjersey.com/
Love my cutting mat? Get yours here: www.etsy.com/shop/BIGROTARYCU...
Join my new Facebook Group here:
/ 2844012669147142
Isn't my Oliso Minin Project Iron Cute? Check it out using my Affiliate Link;
www.oliso.com?aff=49
jsterndesigns.com/product/cus...
To purchase patterns: jsterndesigns.com/shop/
To contact me via email:
jsterndesigns37@gmail.com
To see my teaching schedule:
jsterndesigns.com/product-cat...
To see my list of hand-on workshops:
jsterndesigns.com/workshops/
To see my online classes at Patternreview.com
sewing.patternreview.com/bio/...
To see my Craftsy Classes:
www.craftsy.com/class/the-per...

Хобби

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@jennyf.946 4 месяца назад

Very very helpful in fixing a current issue, very well explained. Good info to know, thank you so much!!

@JSternDesigns 3 месяца назад

My pleasure, thanks for embroidering along with me

@dianabergeron7891 2 года назад

I found them also and had no idea what they were for. I'd love other PRS100 videos because there aren't many.

@JSternDesigns 2 года назад

Yay! ...and join me Sunday at noon for a new tutorial. I'm going to share how to use the Baste in the Hoop Feature!

@princess202769 3 месяца назад

Thank you! Super helpful!

@JSternDesigns 3 месяца назад

Happy to hear, thanks for watching

@Linda-ep3mc Год назад

Thank you I was wondering what they were for.

@JSternDesigns 11 месяцев назад

My Pleasure! I was wondering about them too... So I dug around in the instruction manual until I found out what they were for! Thanks for embroidering along with me

@arikamade 3 месяца назад

Fixed me issue. New follower.

@JSternDesigns 3 месяца назад

So happy to hear, welcome aboard!! Thanks for watching

@edwardolivares5038 4 месяца назад

Love your videos !! Thank you 🙏

@JSternDesigns 4 месяца назад

You are so welcome! Thank you for embroidering along with me!

@laurajeanhodge1976 2 года назад

Thanks please make more videos on using the prs100!

@JSternDesigns 2 года назад

Yay... I'm so happy you would like more PRS 100 videos... Next Up... How to use the Baste in the Hoop Feature!

@kellydavis1313 2 года назад

Thank you so much! This has been very helpful

@JSternDesigns 2 года назад

Glad it was helpful!

@Esparzaa05 2 года назад

Great video 👌🏽

@JSternDesigns 2 года назад

Thank you! 🙂

@censinafortune8388 3 месяца назад

What about the upper tension I hav no idea can you help what I should expect please

@JSternDesigns 3 месяца назад

The upper tension is controlled by the tension knob at the top of the thread path. Righty - Thighy - Lefty - Loosey :))) Turning it right adds tension and turning it left relaxes the tension. The other important thing is to make sure you pass the thread through all the thread guides and wrap the thread in the tension unit so it's secure.... I've made the mistake of skipping little clip right in front of the tension unit and my machine would not stitch right! Hope this helps, thanks for watching

@denisepalmer7028 2 года назад

Having a problem with bobbin thread showing on top...will adjusting my bobbin tension help that? Please keep making these types of episodes for the PR100!! Thanks

@JSternDesigns 2 года назад

Yes!! Righty-Tighty the little screw on the bobbin case just a little bit and test it to see if you tightened it enough. It's easier to make small adjustments vs. cranking it to tight in one adjustment. Please keep me posted if you have specific questions ... I love doing Subscriber Q&A

@ekdavis317 Год назад

How to adjust top tension on persona 100

@JSternDesigns Год назад

That's a good question... Stay tuned :) ...and thanks for watching

@MuseDesigns Год назад

This video has helped me so much, I cannot thank you enough for all your tips! I do have a question I am hoping you can help me with; what do you do when the top thread is looping on the back of the stablizer and not catching the bobbin? I have replaced the needle, oiled the need bar pad and the bobbin inside, replaced the bobbin, checked the bobbin tension, and given the machine a good clean out. I was in the middle of making patches and on the 11th one it suddenly began to do this. Any ideas would be appreciated! Thank you again for this library of videos!!!

@JSternDesigns Год назад

Thank you! ...That's a tricky one, if you've checked all the things you've listed and that did not fix the problem... The only other thing I can suggest is to try a different spool of thread. Sometimes during the winding process, the tension can get messed with, causing the thread to not spool off properly. It may have been fine when the spool was full, but now it's reached an "issue". I really hope this helps! Thanks for embroidering along with me

@MuseDesigns Год назад

@@JSternDesigns It was absolutely the thread!!! I switched to a different design and different color thread and it stitched out perfectly. I was about to lose my mind lol THANK YOU SO MUCH, you are such an amazing resource and I love your content. Thank you for all you do!

@alyciaarajperkins4907 Год назад

Can you help me? I have a brand new prs100 and can’t get a good stitch out

@JSternDesigns Год назад

Can you tell me a little bit more about what's happening when you try to embroider (what kind of thread are you using, needle, stabilizer & fabric) ...and what's happening, it the bobbin thread coming up to the surface? Thanks Jen

@annphilbeck5174 Год назад

Thanks.. on my Persona the top thread is too short to pick up the bobbin thread. I even talked to Brother. don't know what to do. Do you have a suggestion?

@JSternDesigns Год назад

That's interesting... I wonder if the needle thread is a tad too tight so pulls back after it's cut after a color change?

@annphilbeck5174 Год назад

@@JSternDesigns its not the tension . I'm calling Brorher again. thanks for your concern

@JSternDesigns Год назад

@@annphilbeck5174 I hope you can get it figured out!

@annphilbeck5174 Год назад

@@JSternDesigns I'm going to rethread top thread again and lessen top tension more. Thanks and keep the Persona videos coming..

@twinkie1773 2 года назад

Do you have a video explaining the tension and how to adjust it

@JSternDesigns 2 года назад

Sorry for the delayed response. I will add that to my upcoming list of tutorials. Thank you for watching

@twinkie1773 2 года назад

@@JSternDesigns thx ya 🙏🏾 I definitely look forward to them

@edwardolivares5038 4 месяца назад

The persona comes with the weight ?

@JSternDesigns 4 месяца назад

Yes it does!

@gabyalcala0523 2 года назад

How do you put your bobbin in the machine? I keep trying to figure it out but my machine just doesn’t grab the bobbin thread

@JSternDesigns 2 года назад

There is a little latch on the bobbin case... If you pry that latch up to hold the bobbin case, it keeps the bobbin from falling out while inserting it into the bobbin area of the machine. Then pull the thread to see if the bobbin case stays firmly inside. If the thread pulls out freely, it's inserted properly. Then check to make sure your needle is inserted all the way up. If the needle doesn't pick up the bobbin thread, it may be that your machine is out of timing and it needs service... Hope this helps, good luck!