Тёмный

Brother SE600 embroidery Pull Compensation explained 

A-Dubb Productions Allan Wade
Подписаться 130 тыс.
Просмотров 10 тыс.
50% 1

In this video I address the minor issues with our Unicorn embroidery. My aim is to show you that these issues can be solved by making minor adjustments in the software. Check it out and tell me how I did in the comment section. Don't forget to subscribe to the channel.
Brother SE600 amzn.to/2XAd7JS
White Linen amzn.to/2XzLZQ9
Tear away Stabilizer amzn.to/2Jovo9t
Embroidery scissors amzn.to/2YQF29S
Embroidery Thread amzn.to/2L9T1Ve
Thread Organizer Case amzn.to/2Jl39bw
Embroidery Hoops amzn.to/2FZ59UH
Fray Check amzn.to/2YHlqFn
Shop A-Dubb Productions Channel Merchandise Store
❤️👉🏾allanawade.com/
For Contributions send to:
Paypal weloveuadubb@yahoo.com
Cash app $adubbproductions
Venmo @kingallanalexanderwade
For collaborations and business inquiries, please email me: adubbproductions@gmail.com
****************************************************************************************
Visit my AMAZON INFLUENCER PAGE where all the gear I talk about and use lives.
👉🏾www.amazon.com/shop/allanwade
AMAZON LINKS
Shop on Amazon using my affiliate links
Silhouette Cameo 3 amzn.to/2HdkJ0v
Digital Heat Press 15 x 15 amzn.to/2EqjiZK
Brother Sewing and Embroidery Machine amzn.to/2EYEya0
PANASONIC GH5 amzn.to/2QzE8u7
Rode VideoMic Pro Plus amzn.to/2HaPsvc
Rode VideoMicro amzn.to/2SC358A
RODE VIDEO MIC PRO amzn.to/2hNMyfU
GoPro Hero 7 Black amzn.to/2zZAWSX
GoPro Hero 7 Silver amzn.to/2IMaVJw
GoPro Hero 7 White amzn.to/2ILkbOf
SONY-FDR X3000 amzn.to/2hNRZf3
JOBY GORILLA POD amzn.to/2Et83zq
FOTODIOX GREENSCREEN amzn.to/2roav7m
IKAN iLED6 amzn.to/2DiiZyp
Dji Mavic air amzn.to/2pKW8Gw
DJI PHANTOM 4 PRO amzn.to/2hNLF74
DJI PHANTOM 4 amzn.to/2gJ31Gc
DJI MAVIC PRO 2 amzn.to/2F0Ag1K
Delkin TRIPLE Fat Gecko Three-Arm Suction Mount amzn.to/2GyKbLh
Fat Gecko Camera and Camcorder Mount amzn.to/2GANvWm
****************************************************************************************
DON'T FORGET TO SUBSCRIBE.
🔑Subscribe to my other youtube channel
Allan Wade 👉🏾 / @allanwade
🔑Like my Facebook Business page
👉🏾 pg/adubbprod...
🔑Follow me on instagram
👉🏾 / kingallanalexander
------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------
Also check out my business website
If you want tips and tricks and suggestions on how to make your next production better click the link below.
adubbproductions.com
#pullcompesation #embroideryvideo #brotherse600

Развлечения

Опубликовано:

 

25 сен 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 121   
@caitlyngallichotte889
@caitlyngallichotte889 4 года назад
I can't believe I just had my biggest issue explained to me in a call out video. Blessed. Subscribed.
@cece2727
@cece2727 Год назад
I’m a lifelong knitter/machine knitter who has been fascinated by machine embroidery for years. I watched a lot of your videos leading up to me buying my first embroidery machine a couple weeks ago to try it out, but was getting very stuck with my first few designs. I came back to RU-vid and OMG was this so helpful now that I get this a bit more…and of course every question I type in also comes back to your videos!! Wow WOW can you explain things well 🔥 New level of appreciation as I try to truly learn this craft, so thank you!! 💜
@sherryflintosh6964
@sherryflintosh6964 4 года назад
You did amazing!! I'm new to embroidery and I'd rather see mistakes and how to fix it!! I'm far from perfect and I have no clue what I'm doing!! But if we don't try, we'll never succeed!! We learn from our mistakes. No one and I repeat, no one is perect!! I love watching your videos!! Keep going, I love watching and learning. Thank you!!!
@Csxintermodaldude1942
@Csxintermodaldude1942 3 года назад
You have an amazing channel, do not justify any negativity with comments from your channel. You just give those people energy!
@lonettehendrick9836
@lonettehendrick9836 3 месяца назад
You did an awesome job! I know this old but I am still learning and have to rewatch things.
@terrytyson1240
@terrytyson1240 4 года назад
You do a WONDERFUL JOB! Don’t let know one take your joy or make you question yourself some people or just unhappy ☹️ people and she was clearly having problems with herself. 👍🏼👍🏼👍🏼
@adubbproductions
@adubbproductions 4 года назад
I agree. I just wanted to show her along with show other people that just because you see flaws in the design it can be fixed easily. Thanks for the words of encouragement Terry.
@sylvia9290
@sylvia9290 3 года назад
Yours is the most helpful brother embroidery channel on RU-vid.
@1DestinysOptions
@1DestinysOptions 3 года назад
I thank you for every video that you have shared. I have learned so much from you. I have the se625 so I am able to follow along with everything that you are doing. Please keep up your amazing work. I love seeing how you recognize errors and teach how to fix it. Awesome.
@chriskersey4767
@chriskersey4767 4 года назад
Awesome Channel! I've added embroidered morale patches to my business a little over a year ago. I am constantly working to better my designs and you have helped me figure out a lot of the issues I was having. I'm running a Brother SE600 and a PE770 with Brother PE Design 10. Thank you! Keep up the good work.
@minacreates8731
@minacreates8731 Год назад
I'm so happy that I found your channel and especially this video, I've been fighting with pull compensation so much and I was considering pulling the plug on my embroidery projects LOL. Thank you for explaining this so well 😭🙏
@n8latham
@n8latham 4 года назад
I really appreciate your videos and your attitude about things. Keep doing you, brother.
@eddiejr
@eddiejr 4 года назад
great update video!!! thanks for showing us the process from first imperfect stitch out to a great final stitch out. my niece would surely love something like that. thanks for showing that we need not fear the bumps in the road.
@adubbproductions
@adubbproductions 4 года назад
No problem. I’m glad you understand what i was trying to do. Some people don’t get it. Thanks for watching. I appreciate it.
@asheryl1966
@asheryl1966 4 года назад
Thanks so much for this video and explaining what pull compensation is. I've been wracking my brain trying to figure out why my outline doesn't touch my fill and now I know why.
@jeanwalker3204
@jeanwalker3204 4 года назад
Don't worry about that just keep up the good work you really teaching me how to use my embroidery machine
@adubbproductions
@adubbproductions 4 года назад
Thanks. I will. What do you want to know how to do next?
@inarisound
@inarisound Год назад
You are a great man! Keep up the great work, thank you for the video!
@cristinarociles9603
@cristinarociles9603 3 года назад
Thank you so much for these videos! They’re very helpful and much appreciated!
@adubbproductions
@adubbproductions 3 года назад
Your welcome. I appreciate you watching . Thanks so much.
@FlackoWeasel
@FlackoWeasel 2 года назад
It did help alot! Thank you so much!!
@bigpinkdragon2862
@bigpinkdragon2862 4 года назад
Picked up an SE 600 and RU-vid put me onto your videos. Have to say, I was a bit put off by the initial frustrations that came with the learning curve, and couldn't quite figure out how you were getting such nice results all of the time. After finding the right tension however (both bobbin and upper tension,) and proper backing products, the difference in results is amazing. Loved your unicorn so I bought a copy from your website, and wouldn't you know, comes out looking as good as your #4 in the video! I'd post a picture of the results if I knew how. Thanks for putting in the work making the videos, and while I haven't looked elsewhere yet, I think you're selling your designs for a generously low price.
@adubbproductions
@adubbproductions 4 года назад
I appreciate it. I really do. I know the price is low. I’m ok with that. Maybe one day a million people will buy them. Lol. Wishful thinking. I need to make a bunch more. Thank you for watching and keep me posted. I’m glad it came out great for you. I don’t wanna sell anything less than that no matter what the price. 🙏🏾🙌🏾
@dawntaylor8501
@dawntaylor8501 4 года назад
Love the thick surrounding blue. You mentioned in the first vid that it would look better and I agree with you. good job, enjoying the vids.
@adubbproductions
@adubbproductions 4 года назад
Thank you. I appreciate it. Thank you for watching and don't forget to subscribe.
@brigitte2714
@brigitte2714 4 года назад
I watched several videos on pull compensation to understand it and your video was the best explanation. Thanks.
@adubbproductions
@adubbproductions 4 года назад
Your welcome. Thank you for watching. I appreciate it. Don’t forget to subscribe.
@FidelElvira
@FidelElvira 2 года назад
Thank you to bringing out things we don't know and facing👏🏼👏🏼👏🏼🙏👍🏻
@Mysexipanda
@Mysexipanda 2 года назад
Thank you for this video. I did my first design and it had spacing in a spot and I wasn't sure if it was just cause of what I did nor did I know how to fix it. I now understand that it's a easy fix and there is a lot at play with each design. You helped me figure out what to look for to fix it and hopefully next try comes out a bit better. ♥
@jassura6808
@jassura6808 3 года назад
Thank you for explaining pull compensation so well
@julese5115
@julese5115 3 года назад
My GOD i've been embroidering for years and thought pull compensation meant something completely different. THANK YOU so much!!!
@ChikiSkills
@ChikiSkills 2 года назад
Thank you very much for sharing your knowledge, I'm understanding Pull Compensation better.
@adubbproductions
@adubbproductions 2 года назад
No problem. Thank you for watching.
@zrieger84
@zrieger84 2 года назад
Just subscribe. New at this and your videos keep helping me out. Much appreciated. Glad you said that about learning to do things properly and not just going out and buying a better machine. Exactly what I was hoping to hear. I’ll keep learning. Thank you
@sandeeyoung
@sandeeyoung 4 года назад
Keep it up, you are doing great!! I really enjoy your videos, and they are helpful to me!
@adubbproductions
@adubbproductions 4 года назад
Your welcome Sandy. I appreciate you watching. I’ll make more.
@thesimplyspoiled1
@thesimplyspoiled1 2 года назад
Excellent. Thank you! 🤗
@Etentarelli
@Etentarelli 3 года назад
Thank you for showing me how to use my machine. I was afraid to use. I purchased and took a week to even open the box. But after seeing your videos I felt more comfortable.
@s.m.ksousamusickrew5829
@s.m.ksousamusickrew5829 5 месяцев назад
Yes you explain it fixed my issue thanks man ✌️
@phatkid2330
@phatkid2330 4 года назад
i like both of them. the first one look like highlights on the hair like a drawing. I like both
@christiansiddons2121
@christiansiddons2121 2 года назад
Cool video thank you for the tutorial
@annewong5168
@annewong5168 4 года назад
Thanks for the video. Very informative. Keep up the good work.
@adubbproductions
@adubbproductions 4 года назад
Thank you. I appreciate it. Thanks for watching. Please subscribe if you havent already.
@kingpreme6037
@kingpreme6037 3 года назад
I completely understand now, thank you!.. Great video.
@manpreetsuk
@manpreetsuk 3 года назад
Thank you man for such a great video. From last two weeks i have been struggling with my new machine and thought problem was machine or tension. Great 👍 video.
@richardcolbourne6151
@richardcolbourne6151 2 года назад
Thank you for a straightforward explanation. I'm not new to the process but now I'm responsible for the operation and the only issue I'm having is puckering. Now I'm sure where I'm going wrong. Great video 👍
@debischoenbaechler
@debischoenbaechler 3 года назад
Well done. Excellent tutorial on pull compensation.
@karenmcgrady6349
@karenmcgrady6349 4 года назад
I'm new to your channel as of yesterday and have watched several of your videos (and enjoyed them!). I don't have this machine yet, but my husband ordered one for me for Christmas, so I'm trying to get ahead of the game :) Keep showing mistakes, because that makes the training more valuable. I wasn't aware of the software that you are using and wondered if you have any videos that show how you go about designing a project. Also, I'm having problems finding any videos (from anyone) that show what type of designs are pre-loaded in this machine. I can hardly wait to get my hands on the machine and try it out. This will be a totally new experience! (I love your positive and diplomatic attitude... we need more of that in this world!!)
@bukimeisu
@bukimeisu 3 года назад
This actually helps a lot. I have been struggling for a bout a week now with a custom rose design and for some reason, no matter what I did, I couldn't get the outline to cover the satin stitch fill I had for the petals and the whole patch was warped once I took it off the hoop. This could very well be one of my issues, I will correct that now, thank you!
@adubbproductions
@adubbproductions 3 года назад
You are welcome. Thank you so much for watching. 🙏🏾
@xxmxx1303
@xxmxx1303 2 года назад
This is the best explains I see thank you
@adubbproductions
@adubbproductions 2 года назад
You’re welcome. Thank you for watching.
@kathys9999
@kathys9999 4 года назад
Yes you explained perfectly! Thank you
@belenhernandez6366
@belenhernandez6366 3 года назад
Thanks for the video this really helps
@carolgump1
@carolgump1 Год назад
Thank you for explaining so well
@adubbproductions
@adubbproductions Год назад
My pleasure. Thank you for watching.
@lauralang1249
@lauralang1249 3 года назад
THE BEST!!! Thank you so much!!!! Fully understand it
@adubbproductions
@adubbproductions 3 года назад
No problem. Thanks for watching.
@kathys9999
@kathys9999 4 года назад
Thank you, very helpful!
@happeedeytm3277
@happeedeytm3277 3 года назад
well explained brotha! liked and subscribed!
@MertCanAydin1997
@MertCanAydin1997 3 года назад
Great video, easy to understand. I used to have pull compensation problems... They should be resolved now,
@MoniqueMonique40
@MoniqueMonique40 4 года назад
I love it! Looks good to me
@JPLefrakCity
@JPLefrakCity 4 года назад
Thank you sir you explained it very well I applaud you. I been watching since day one.
@adubbproductions
@adubbproductions 4 года назад
No problem. That’s what i was hopping. Thanks you for you support I appreciate that.
@5XWAZM
@5XWAZM 3 года назад
I started learning how to digitise at my parents factory and my dad told me that you'd preferably like to get the pull comp between 25-60...but anything around 25 should good..thanx for this vid. Very informative. I'm learning on wilcom and on a Happy machine
@FiveFascinating
@FiveFascinating 2 года назад
thanks a lot , very useful
@jopaul3143
@jopaul3143 10 месяцев назад
So knowledgeable thanks for sharing
@rebeccazegstroo6786
@rebeccazegstroo6786 11 месяцев назад
Yes, well explained. Thank you.
@adubbproductions
@adubbproductions 11 месяцев назад
My pleasure. Thank you for watching.
@JunkieVirus
@JunkieVirus 3 года назад
thank you for explaining this!!
@adubbproductions
@adubbproductions 3 года назад
You are welcome.
@Tron1602
@Tron1602 3 года назад
Thank You... You've added to the lexicon.
@marianamolina6741
@marianamolina6741 4 года назад
Thank you so much for this.
@adubbproductions
@adubbproductions 4 года назад
Your welcome. thank you so much for watching. just incase you didnt know this design is on my website for $1 you can purchase this file.
@mytree123
@mytree123 3 года назад
Thank you
@jamesreyes471
@jamesreyes471 2 года назад
Thanks that helped me a lot I i’ve been dealing with this for about a week is real frustrating I’d like to see the actual mistake done so I know that’s what’s happening to me and I also know how to Correct the problem
@coloradoqueen3282
@coloradoqueen3282 3 года назад
Great video
@DirtyBrew
@DirtyBrew 4 года назад
Hey @A-Dubb Productions Allan Wade I like your videos, you do a good job of explaining things. I own a small vehicle wrap shop and I typically heat press my logo on shirts for my self I purchased this embroidery machine to embroidre my own shirts. I had a digitizing company digitize my logo for me and they gave it to me in PES format and I can open it in PE design 10 but I cannot figure out how to adjust the pull compensation on there art work. It needs adjusted slightly.. Is there away to do that?
@Pufaes
@Pufaes 2 года назад
Could someone help me? I created a design and used pull compensation however the outline would stitch correctly but it wouldn’t fill up all the way (only a one color design). I use 100% cotton t shirts and stabilized well with 2 layers of cutaway stabilizer, my thread and bobbin tension are fine. What can I do?
@burrowinghabits3465
@burrowinghabits3465 Год назад
This is the first time I've even taken the time to understand this concept. Thank you so much for making it pretty straightforward. I have a sewing background... and it looks like maybe the design requires more pull compensation where the stitches would be pulling across the bias grain of the fabric. Do you find this to be true?
@big3814
@big3814 4 года назад
whats good a-dubb i see you are from philly i am also from philly i have been looking for a video on steps on how to make a patch but very video i see does not take you through each step like step one this what you do and so forth i want learn but i do not know what is the very first step do you think you can make a video on all steps from beginning to end i would really appreciate it
@alfredohuerta5688
@alfredohuerta5688 3 года назад
Great video and lots of enthusiasm,! However, at 3:20 you begin to explain that pull compensation makes the stitch more "loose". I'm not sure that is true. From what I have read I believe that pull compensation makes the stitch "longer" by a specified amount (very small) but the thread ends up equally tight along the stitch (not more loose as you say). With the longer stitch in place pull "still happens" as with the shorter stitch, but the pull that happens will end up leaving the end of the stitch closer to where the machine "believes" it should be as if little or no pull had occurred. The pull compensation or "overstitch" compensates for the reduction in length of the stitches and fabric in that direction.
@megancleary5794
@megancleary5794 Год назад
Thank you so much. finally someone explained pull comp in a way I could understand. do you have a video on how many stitches the machine should do at start of embroidery design and for each time it starts and stops. another words how may times should it penatrate the fabric at the start of a design, and finish.
@adubbproductions
@adubbproductions Год назад
No I dont. But in general it does tend to go threw two or three times to get the actual embroidery going.
@megancleary5794
@megancleary5794 Год назад
@@adubbproductions Thank you, my machine does it five times, which seems a lot and then it has a lot of awful bunching underneath, I Will try setting the tie downs to 3 and see if that is better.
@jaybtee168
@jaybtee168 4 года назад
Hello what kind of needles do you use or prefer?
@laurabekin5608
@laurabekin5608 4 года назад
Thanks for the explanation of pull compensation. If that happens with a design that I buy, how can I fix it?
@adubbproductions
@adubbproductions 4 года назад
You would have to get it fixed buy the person that made the design or if you have the program that the design was made with. Adjust it in the program.
@briananicole7230
@briananicole7230 4 года назад
Thank you for this! Do you know what the best software for a Mac would be? I'm very new to this!
@regenemallare8231
@regenemallare8231 3 года назад
Embrilliance is a fan favourite among mac users !
@adubbproductions
@adubbproductions 3 года назад
Sorry for the late response I’m just seeing this. Thanks Regene for making it pop up again. Yes, you can’t go wrong with embrilliance. I personally use Chroma Luxe by Ricoma. Here is my affiliate link if you’d link to look into it. Ricoma SHOP link shop.ricoma.com?referral=allan-wade
@gamersestate2147
@gamersestate2147 3 года назад
I Started my own brand and im having issues with the pulling when the machine does the black outline of my logo. What program do you use to adjust the pulling with?
@feddtyme0722
@feddtyme0722 Год назад
did you ever find the right software
@marthareed7178
@marthareed7178 2 года назад
could you do a video on how to place a design on a towel, please
@adubbproductions
@adubbproductions 2 года назад
Sure, done. Here you are ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fG939ZBkjsQ.html
@stepwoo7965
@stepwoo7965 3 года назад
what software did you use in the video? for the embroidery
@adubbproductions
@adubbproductions 3 года назад
I used Brother Pe Design 10 on this one.
@fabiioliita04
@fabiioliita04 2 года назад
What hapen if you buy a design from etsy and its doing that
@adubbproductions
@adubbproductions 2 года назад
You contact the seller and get them to give assistance on the product they sold you.
@craytsofficial2116
@craytsofficial2116 3 года назад
Livesaver!!!!
@wilbergarcia5639
@wilbergarcia5639 4 года назад
Nice video 😂
@adubbproductions
@adubbproductions 4 года назад
😁😂😂😂😂 thank you. Thanks for watching.
@FidelElvira
@FidelElvira 2 года назад
Bad comments don't count!!!!👍🏻
@malikiscooler6078
@malikiscooler6078 4 года назад
Can you make a video on how to download pes software and a walk through of it
@adubbproductions
@adubbproductions 4 года назад
Do you have the software? I can do a walk threw of the program but a video on how to download. You gotta buy it to do that. I already have it and i don’t think i wanna uninstall it to do that. Not really a popular enough topic to make a video on.
@vickyj-lewis1017
@vickyj-lewis1017 4 года назад
Don't worry with this fool!! If she knows so much, why did she bother to watch your video, trying to learn how to do the embroidery designs. By the way congratulations on your 7k subscribers👍🏼
@adubbproductions
@adubbproductions 4 года назад
🙏🏾👍🏾💪🏾🙌🏾🙌🏾🙌🏾 woohoo 7k Vicky look at that. Thanks. I’m not worried about that lady. Lol
@lakeshamoniqueofsubroidery7413
@lakeshamoniqueofsubroidery7413 4 года назад
Hi Allan, I love you videos and I have the same machine. I would like to know what software did you use to digitize your Unicorn and can I purchase the Unicorn for myself?
@adubbproductions
@adubbproductions 4 года назад
Hey Lakesha, the software I used was brother PE design 10 to digitize the unicorn. You can purchase any of my designs from www.allanawade.com thanks so much in advance. I appreciate you watching and buying the design. 🙏🏾
@robindunhingeduncensored8054
@robindunhingeduncensored8054 2 года назад
What’s the name of the software you’re using
@adubbproductions
@adubbproductions 2 года назад
I think I used Brother PE design 10 at the time of this video.
@teegilbert
@teegilbert 3 года назад
Hello, i am using default fonts and having this problem
@adubbproductions
@adubbproductions 3 года назад
You should be fine using default font. Try adjusting that tension right at the top of the machine. Lower the number so the threads embroider looser.
@teegilbert
@teegilbert 3 года назад
I FINALLY got a straight line 😁 after adjusting for hours last night 😞 thanks OG
@adubbproductions
@adubbproductions 3 года назад
@@teegilbert 👍🏾 congratulations. You did it. That is great. How did you fix it?
@teegilbert
@teegilbert 3 года назад
@@adubbproductionsI removed the needle that comes on it, actually it broke and i needed a better stabilizer
@adubbproductions
@adubbproductions 3 года назад
Great I’m glad you figured it out.
Далее
Tension and Pull compensation on the Brother PE800
21:09
Embroidering Your Design on The Brother SE600
22:58
Просмотров 39 тыс.
Quick Tip: How to Prevent Puckering
2:01
Просмотров 120 тыс.
Brother SE600 | Cleaning , Oiling and Maintenance
38:10
Embroidering Directly onto a Beanie | Brother PE800
30:21
The Ultimate Embroidery Cheat Sheet
23:53
Просмотров 29 тыс.
Embroidering my first patch on the Brother SE600
21:15
Printing live with the Ricoma 2402-T
29:20
Просмотров 1,2 тыс.
Будни в пекарне. Часть 2
0:59
Просмотров 3,9 млн
🤣МАЛО КУПИТЬ ЛОШАДЬ
0:18
Просмотров 5 млн