May I suggest an outrigger ? (two outrunners on one solid shaft perhaps ?) You've seen the kind of props they use ? Reminds me of the leaves of a tulip.. Hand finished out of VERY rough castings.......I'll try getting some of those, Will send one if desired (and all goes well) Keep you posted......
I'm building the 21"twin cat as you know and I did look at these esc. I didn't like that there wasn't a 90 amp because I wanted 20 percent more esc amperage than the motor requires, and second the programming card was more than the motors like you said. Also i didn't like the water cooling they had going on, or not going on. It just wasn't enough for these motors. Anyway I went with 2 reliable flycolor 90. Can't go wrong with those and I have the room, barely. Bg4l
I’ve had no luck at all with ZTW g2’s and these shark g2’s ZTW don’t warrant either they just argue till you give up, the 130 amp g2 caught fire and nearly destroyed my boat. Good luck with it.
I'm wondering if you know how I should program the ESC to make it stop automatically when it loses connection from the transmitter. I turned off the transmitter before I unplugged the battery, and the motor went to full power. Thank you!
@@grrfy same, just got a 60A Shark for my 3s/ 3100KV brushless swap on the Jet Jam. Decided to bite the bullet and drill through the hull and the jet outlet, that way I can go water cooled for the motor and esc. I like full throttle and I don't want anything burning up on me. Hope it works out for us both lol 😅
@@bradfisher22 I still need to solder conectors and stuff to mine, that sounds like a good sensible mod to me,it really helps,will follow on here and see how you do
May be intended for bigger hulls (yes) but can we see a twin outrunner cat / rigger / mono in (near) future ? I do like the scream of those....... An Asian guy mounted 7 outrunners on 1 solid shaft long hull outrigger. Wow !