Brushless Hyper Speed and Camera testing 

Yes buddy, there is another video on the channel. Bought a complete hyper 7 rear end off eBay for £35 😁

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uiT5DiXihrs.htmlsi=tZ6tcBuW8wB17s28 Diff video, rebuild is from 15mins in

No, sensorless traxxas 2200kv motor, and it's a basic hobbywing clone 50A ESC

Only thing I've recently changed is the Rx. Previously had Etronix radio gear in it. I didn't like the TX as the steering wheel on it had too much slop which made driving in a straight line impossible. I was using the Flysky GT3b on the Baja, so bought a new RX and paired it to the GT3 I haven't adjusted the ESC tho. I've been reading that you need to re set neutral throttle and brake sometimes with a nes RX being installed, by pressing the program button on the power switch. So gonna give that a try this week

@@Matt.hurst1980 might be your wires from esc to motor. I saw you had some connector blocks from the esc to motor - I would of you could run new cable from esc to motor if they can be un solder

@@chrisknights4604 yes agreed, it was like that when I got it. Still on a big learning curve with all the leccy stuff. Did consider opening up the ESC to see if that was possible, but haven't done so as yet